| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently the only vNVDIMM backend can guarantee the guest write
persistence is device DAX on Linux, because no host-side kernel cache
is involved in the guest access to it. The approach to detect whether
the backend is device DAX needs to access sysfs, which may not work
with SELinux.
Instead, we add the 'unarmed' option to device 'nvdimm', so that users
or management utils, which have enough knowledge about the backend,
can control the unarmed flag in guest ACPI NFIT via this option. The
guest Linux NVDIMM driver, for example, will mark the corresponding
vNVDIMM device read-only if the unarmed flag in guest NFIT is set.
The default value of 'unarmed' option is 'off' in order to keep the
backwards compatibility.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171211072806.2812-4-haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
When mmap(2) the backend files, QEMU uses the host page size
(getpagesize(2)) by default as the alignment of mapping address.
However, some backends may require alignments different than the page
size. For example, mmap a device DAX (e.g., /dev/dax0.0) on Linux
kernel 4.13 to an address, which is 4K-aligned but not 2M-aligned,
fails with a kernel message like
[617494.969768] dax dax0.0: qemu-system-x86: dax_mmap: fail, unaligned vma (0x7fa37c579000 - 0x7fa43c579000, 0x1fffff)
Because there is no common approach to get such alignment requirement,
we add the 'align' option to 'memory-backend-file', so that users or
management utils, which have enough knowledge about the backend, can
specify a proper alignment via this option.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171211072806.2812-2-haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[ehabkost: fixed typo, fixed error_setg() format string]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
The number of queues supported by the slave is queried with
message VHOST_USER_GET_QUEUE_NUM, not with message
VHOST_USER_GET_PROTOCOL_FEATURES.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add VHOST_USER_GET_CONFIG/VHOST_USER_SET_CONFIG messages which can be
used for live migration of vhost user devices, also vhost user devices
can benefit from the messages to get/set virtio config space from/to the
I/O target. For the purpose to support virtio config space change,
VHOST_USER_SLAVE_CONFIG_CHANGE_MSG message is added as the event notifier
in case virtio config space change in the slave I/O target.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
* QemuMutex tracing improvements (Alex)
* ram_addr_t optimization (David)
* SCSI fixes (Fam, Stefan, me)
* do {} while (0) fixes (Eric)
* KVM fix for PMU (Jan)
* memory leak fixes from ASAN (Marc-André)
* migration fix for HPET, icount, loadvm (Maria, Pavel)
* hflags fixes (me, Tao)
* block/iscsi uninitialized variable (Peter L.)
* full support for GMainContexts in character devices (Peter Xu)
* more boot-serial-test (Thomas)
* Memory leak fix (Zhecheng)
# gpg: Signature made Tue 16 Jan 2018 14:15:45 GMT
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (51 commits)
scripts/analyse-locks-simpletrace.py: script to analyse lock times
util/qemu-thread-*: add qemu_lock, locked and unlock trace events
cpu: flush TB cache when loading VMState
block/iscsi: fix initialization of iTask in iscsi_co_get_block_status
find_ram_offset: Align ram_addr_t allocation on long boundaries
find_ram_offset: Add comments and tracing
cpu_physical_memory_sync_dirty_bitmap: Another alignment fix
checkpatch: Enforce proper do/while (0) style
maint: Fix macros with broken 'do/while(0); ' usage
tests: Avoid 'do/while(false); ' in vhost-user-bridge
chardev: Clean up previous patch indentation
chardev: Use goto/label instead of do/break/while(0)
mips: Tweak location of ';' in macros
net: Drop unusual use of do { } while (0);
irq: fix memory leak
cpus: unify qemu_*_wait_io_event
icount: fixed saving/restoring of icount warp timers
scripts/qemu-gdb/timers.py: new helper to dump timer state
scripts/qemu-gdb: add simple tcg lock status helper
target-i386: update hflags on Hypervisor.framework
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Mostly just manual conversion with very minor fixes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
$ make print-CFLAGS
CFLAGS=-fsanitize=address -Og -g
Trick from various sources:
https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile
https://www.cmcrossroads.com/article/printing-value-makefile-variable
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180104160523.22995-4-marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Resolve conflicts around apb.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The vhost-user protocol specification does not define "guest address"
and "user address". It does not explain how to access memory given such
addresses.
This patch explains how memory access works, including the IOTLB.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
|
|
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
s/Subection/Subsection
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Message-Id: <20171012064448.20276-1-chen_han_xiao@126.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
See the patch for why nested AioContext locking is no longer allowed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171207201320.19284-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
When you cancel an in-progress 'mirror' job (or "active `block-commit`")
with QMP `block-job-cancel`, it emits the event: BLOCK_JOB_CANCELLED.
However, when `block-job-cancel` is issued *after* `drive-mirror` has
indicated (via the event BLOCK_JOB_READY) that the source and
destination have reached synchronization:
[...] # Snip `drive-mirror` invocation & outputs
{
"execute":"block-job-cancel",
"arguments":{
"device":"virtio0"
}
}
{"return": {}}
It (`block-job-cancel`) will counterintuitively emit the event
'BLOCK_JOB_COMPLETED':
{
"timestamp":{
"seconds":1510678024,
"microseconds":526240
},
"event":"BLOCK_JOB_COMPLETED",
"data":{
"device":"virtio0",
"len":41126400,
"offset":41126400,
"speed":0,
"type":"mirror"
}
}
But this is expected behaviour, where the _COMPLETED event indicates
that synchronization has successfully ended (and the destination now has
a point-in-time copy, which is at the time of cancel).
So add a small note to this effect in 'block-core.json'. While at it,
also update the "Live disk synchronization -- drive-mirror and
blockdev-mirror" section in 'live-block-operations.rst'.
(Thanks: Max Reitz for reminding me of this caveat on IRC.)
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This documents the image locking feature and explains when and how
related options can be used.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
qemu.org enabled HTTPS in 2017 and it should be used instead of HTTP.
There are also URLs to json.org, openvpn.net, and other domains that
support HTTPS.
This patch updates the qemu.org domains everywhere and also third-party
domains that I have checked.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20171121120435.28728-3-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The owner of qemu.org has delegated authority to modify DNS records to
the QEMU Project. This has allowed us to use the domain name without
worries about IP address changes or technical issues disrupting service.
The issues described in commit 859389810910f232188675d2f10b15f1aad77660
("Use qemu-project.org domain name") have therefore been mitigated.
This patch switches back to consistently using qemu.org instead of
qemu-project.org in documentation, version.rc, and the Windows installer
script.
The git submodules and SeaBIOS still use qemu-project.org for the time
being. This will be fixed in the QEMU 2.12 release cycle.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20171121120435.28728-2-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Following the recent extension of QEMU with a TPM emulator device,
update the specs describing for how to interact with the device.
The results of commands run inside a Linux VM are expected to be
similar to those when the TPM passthrough device is used, so we
just reuse that.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
Legacy PCI device assignment has been removed from Linux in 4.12,
and had been deprecated 2 years ago there. We can remove it from
QEMU as well.
The ROM loading code was shared with Xen PCI passthrough, so move
it to hw/xen.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
* TCG 8-byte atomic accesses bugfix (Andrew)
* Report disk rotation rate (Daniel)
* Report invalid scsi-disk block size configuration (Mark)
* KVM and memory API MemoryListener fixes (David, Maxime, Peter Xu)
* x86 CPU hotplug crash fix (Igor)
* Load/store API documentation (Peter Maydell)
* Small fixes by myself and Thomas
* qdev DEVICE_DELETED deferral (Michael)
# gpg: Signature made Wed 18 Oct 2017 10:56:24 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (29 commits)
scsi: reject configurations with logical block size > physical block size
qdev: defer DEVICE_DEL event until instance_finalize()
Revert "qdev: Free QemuOpts when the QOM path goes away"
qdev: store DeviceState's canonical path to use when unparenting
qemu-pr-helper: use new libmultipath API
watch_mem_write: implement 8-byte accesses
notdirty_mem_write: implement 8-byte accesses
memory: reuse section_from_flat_range()
kvm: simplify kvm_align_section()
kvm: region_add and region_del is not called on updates
kvm: fix error message when failing to unregister slot
kvm: tolerate non-existing slot for log_start/log_stop/log_sync
kvm: fix alignment of ram address
memory: call log_start after region_add
target/i386: trap on instructions longer than >15 bytes
target/i386: introduce x86_ld*_code
tco: add trace events
docs/devel/loads-stores.rst: Document our various load and store APIs
nios2: define tcg_env
build: remove CONFIG_LIBDECNUMBER
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
pc, pci, virtio: fixes, features
A bunch of fixes all over the place.
A new vmcore device - the user interface around it is still somewhat
controversial, but I feel most of the code is fine, suggestions can be
addressed by adding patches on top.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 15 Oct 2017 04:02:23 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (26 commits)
tests/pxe: Test more NICs when running in SPEED=slow mode
pc: remove useless hot_add_cpu initialisation
isapc: Remove unnecessary migration compatibility code
virtio-pci: Replace modern_as with direct access to modern_bar
virtio: fix descriptor counting in virtqueue_pop
hw/gen_pcie_root_port: make IO RO 0 on IO disabled
pci: Validate interfaces on base_class_init
xen/pt: Mark TYPE_XEN_PT_DEVICE as hybrid
pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devices
pci: Add INTERFACE_PCIE_DEVICE to all PCIe devices
pci: Add interface names to hybrid PCI devices
pci: conventional-pci-device and pci-express-device interfaces
PCI: PCIe access should always be little endian
virtio/pci/migration: Convert to VMState
hw/pci-bridge/pcie_pci_bridge: properly handle MSI unavailability case
pci: allow 32-bit PCI IO accesses to pass through the PCI bridge
virtio/vhost: reset dev->log after syncing
MAINTAINERS: add Dump maintainers
scripts/dump-guest-memory.py: add vmcoreinfo
kdump: set vmcoreinfo location
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
QEMU has a wide selection of different functions for doing
loads and stores; provide some overview documentation of
what they do and how to pick which one to use.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1507813181-11860-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If the guest note is VMCOREINFO, try to get phys_base from it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
See docs/specs/vmcoreinfo.txt for details.
"etc/vmcoreinfo" fw_cfg entry is added when using "-device vmcoreinfo".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch adds a description of the current TPM support in QEMU
to the specs.
Several public specs are referenced via their landing page on the
trustedcomputinggroup.org website.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
'remotes/dgilbert/tags/pull-migration-20170927a' into staging
Migration pull 2017-09-27
# gpg: Signature made Wed 27 Sep 2017 14:56:23 BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20170927a:
migration: Route more error paths
migration: Route errors up through vmstate_save
migration: wire vmstate_save_state errors up to vmstate_subsection_save
migration: Check field save returns
migration: check pre_save return in vmstate_save_state
migration: pre_save return int
migration: disable auto-converge during bulk block migration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Block layer patches
# gpg: Signature made Tue 26 Sep 2017 14:52:32 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (24 commits)
block/qcow2-bitmap: fix use of uninitialized pointer
qemu-iotests: add shrinking image test
qcow2: add shrink image support
qcow2: add qcow2_cache_discard
qemu-img: add --shrink flag for resize
iotests: fix 181: enable postcopy-ram capability on target
qemu-iotests: Test change-backing-file command
block: Fix permissions after bdrv_reopen()
block: reopen: Queue children after their parents
block: Base permissions on rw state after reopen
block: Add reopen queue to bdrv_check_perm()
block: Add reopen_queue to bdrv_child_perm()
qemu-io: Drop write permissions before read-only reopen
block: Clean up some bad code in the vvfat driver
block/throttle-groups.c: allocate RestartData on the heap
throttle: Assert that bkt->max is valid in throttle_compute_wait()
iotests: Print full path of bad output if mismatch
iotests: use virtio aliases for 067
iotests: use -ccw on s390x for 051
iotests: use -ccw on s390x for 040, 139, and 182
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Block driver documentation is available in qemu-doc.html. It would be
convenient to have documentation for formats, protocols, and filter
drivers in a man page.
Extract the relevant part of qemu-doc.html into a new file called
docs/qemu-block-drivers.texi. This file can also be built as a
stand-alone document (man, html, etc).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The example obviously lacks the "-m" parameter.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Proper support of persistent reservation for multipath devices requires
communication with the multipath daemon, so that the reservation is
registered and applied when a path comes up. The device mapper
utilities provide a library to do so; this patch makes qemu-pr-helper.c
detect multipath devices and, when one is found, delegate the operation
to libmpathpersist.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduce a privileged helper to run persistent reservation commands.
This lets virtual machines send persistent reservations without using
CAP_SYS_RAWIO or out-of-tree patches. The helper uses Unix permissions
and SCM_RIGHTS to restrict access to processes that can access its socket
and prove that they have an open file descriptor for a raw SCSI device.
The next patch will also correct the usage of persistent reservations
with multipath devices.
It would also be possible to support for Linux's IOC_PR_* ioctls in
the future, to support NVMe devices. For now, however, only SCSI is
supported.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It is a common requirement for virtual machine to send persistent
reservations, but this currently requires either running QEMU with
CAP_SYS_RAWIO, or using out-of-tree patches that let an unprivileged
QEMU bypass Linux's filter on SG_IO commands.
As an alternative mechanism, the next patches will introduce a
privileged helper to run persistent reservation commands without
expanding QEMU's attack surface unnecessarily.
The helper is invoked through a "pr-manager" QOM object, to which
file-posix.c passes SG_IO requests for PERSISTENT RESERVE OUT and
PERSISTENT RESERVE IN commands. For example:
$ qemu-system-x86_64
-device virtio-scsi \
-object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock
-drive if=none,id=hd,driver=raw,file.filename=/dev/sdb,file.pr-manager=helper0
-device scsi-block,drive=hd
or:
$ qemu-system-x86_64
-device virtio-scsi \
-object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock
-blockdev node-name=hd,driver=raw,file.driver=host_device,file.filename=/dev/sdb,file.pr-manager=helper0
-device scsi-block,drive=hd
Multiple pr-manager implementations are conceivable and possible, though
only one is implemented right now. For example, a pr-manager could:
- talk directly to the multipath daemon from a privileged QEMU
(i.e. QEMU links to libmpathpersist); this makes reservation work
properly with multipath, but still requires CAP_SYS_RAWIO
- use the Linux IOC_PR_* ioctls (they require CAP_SYS_ADMIN though)
- more interestingly, implement reservations directly in QEMU
through file system locks or a shared database (e.g. sqlite)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It's possible for address_space_get_flatview() as it currently stands
to cause a use-after-free for the returned FlatView, if the reference
count is incremented after the FlatView has been replaced by a writer:
thread 1 thread 2 RCU thread
-------------------------------------------------------------
rcu_read_lock
read as->current_map
set as->current_map
flatview_unref
'--> call_rcu
flatview_ref
[ref=1]
rcu_read_unlock
flatview_destroy
<badness>
Since FlatViews are not updated very often, we can just detect the
situation using a new atomic op atomic_fetch_inc_nonzero, similar to
Linux's atomic_inc_not_zero, which performs the refcount increment only if
it hasn't already hit zero. This is similar to Linux commit de09a9771a53
("CRED: Fix get_task_cred() and task_state() to not resurrect dead
credentials", 2010-07-29).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Using two libraries (libqemuutil.a and libqemustub.a) would sometimes
result in circular dependencies. To avoid these issues let's just
combine both into a single library that functions as both.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <54e6458745493d10901964624479a7d9a872f481.1503077821.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Update colo-proxy.txt,add IOThread configuration.
Later we have to configure IOThread,if not COLO can not work.
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wang Yong <wang.yong155@zte.com.cn>
Signed-off-by: Wang Guang <wang.guang55@zte.com.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
The next commit will put it to use. May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-2-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
Currently, vhost-user does not implement any means for notifying the
backend about guest endianess. This commit introduces a new message
called VHOST_USER_SET_VRING_ENDIAN which is analogous to the ioctl()
called VHOST_SET_VRING_ENDIAN used for kernel vhost backends. Such
message is necessary for backends supporting legacy (pre-1.0) virtio
devices running in big-endian guests.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Mike Cui <cui@nutanix.com>
|
|
Code that checks dstate is unaware of SystemTap and LTTng UST dstate, so
the following trace event will not fire when solely enabled by SystemTap
or LTTng UST:
if (trace_event_get_state(TRACE_MY_EVENT)) {
str = g_strdup_printf("Expensive string to generate ...",
...);
trace_my_event(str);
g_free(str);
}
Add trace_event_get_state_backends() to fetch backend dstate. Those
backends that use QEMU dstate fetch it as part of
generate_h_backend_dstate().
Update existing trace_event_get_state() callers to use
trace_event_get_state_backends() instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170731140718.22010-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
When this file was rewritten/renamed in fdee2025dd,
a reference path was not updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
With the move of some docs/ to docs/devel/ on ac06724a71,
a reference path was not updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
With the move of some docs/ to docs/devel/ on ac06724a71,
a couple of references were not updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
With the move of some docs to docs/interop on ac06724a71,
a couple of references were not updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
With the move of some docs to docs/interop on d59157ea05,
a reference path was not updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
With the move of some docs to docs/interop on d59157e, a couple of
references were not updated.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
[PMD: fixed a typo and another reference of docs/interop/qmp-spec.txt]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
I expect the 'null' type to be useful mostly for members of alternate
types.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
# gpg: Signature made Tue 18 Jul 2017 05:15:03 BST
# gpg: using RSA key 0xBDBE7B27C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg: aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg: aka "Jeffrey Cody <codyprime@gmail.com>"
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98 D624 BDBE 7B27 C0DE 3057
* remotes/cody/tags/block-pull-request:
live-block-ops.txt: Rename, rewrite, and improve it
bitmaps.md: Convert to rST; move it into 'interop' dir
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
