summaryrefslogtreecommitdiff
path: root/hmp-commands.hx
AgeCommit message (Collapse)AuthorFilesLines
2013-04-12Revert "New QMP command query-cpu-max and HMP command cpu_max"Michal Novotny1-2/+0
This reverts commit 4d700430a20b3d53b7b15bc5f6666f7e570e3f2c as asked by Luiz. The patch has been obsoleted by extending MachineInfo structure by cpu-max field. Signed-off-by: Michal Novotny <minovotn@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-25New QMP command query-cpu-max and HMP command cpu_maxMichal Novotny1-0/+2
These commands return the maximum number of CPUs supported by the currently running emulator instance, as defined in its QEMUMachine struct. Signed-off-by: Michal Novotny <minovotn@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-13Revert "hmp: Disable chardev-add and chardev-remove"Gerd Hoffmann1-32/+31
This reverts commit 8a14952c9d2f5fa2b3caa6dc286b62ed5d26bca7.
2013-03-12Support for TPM command line optionsStefan Berger1-0/+2
This patch adds support for TPM command line options. The command line options supported here are ./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id> -device tpm-tis,tpmdev=<id>,id=<other id> and ./qemu-... -tpmdev help where the latter works similar to -soundhw help and shows a list of available TPM backends (for example 'passthrough'). Using the type parameter, the backend is chosen, i.e., 'passthrough' for the passthrough driver. The interpretation of the other parameters along with determining whether enough parameters were provided is pushed into the backend driver, which needs to implement the interface function 'create' and return a TPMDriverOpts structure if the VM can be started or 'NULL' if not enough or bad parameters were provided. Monitor support for 'info tpm' has been added. It for example prints the following: (qemu) info tpm TPM devices: tpm0: model=tpm-tis \ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-27doc: document -netdev hubportStefan Hajnoczi1-1/+1
Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-26qemu-log: default to stderr for logging outputPeter Maydell1-2/+2
Switch the default for qemu_log logging output from "/tmp/qemu.log" to stderr. This is an incompatible change in some sense, but logging is mostly used for debugging purposes so it shouldn't affect production use. The previous behaviour can be obtained by adding "-D /tmp/qemu.log" to the command line. This change requires us to: * update all the documentation/help text (we take the opportunity to smooth out minor inconsistencies between the phrasing in linux-user/bsd-user/system help messages) * make linux-user and bsd-user defer to qemu-log for the default logging destination rather than overriding it themselves * ensure that all logfile closing is done via qemu_log_close() and that that function doesn't close stderr as well as the obvious change to the behaviour of do_qemu_set_log() when no logfile name has been specified. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1361901160-28729-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06hmp: Disable chardev-add and chardev-removeMarkus Armbruster1-31/+32
As a general rule, HMP commands must be built on top of the QMP API. Luiz and others have worked long & hard to make HMP conform to this rule. Commit f1088908 added chardev-add, in violation of this rule. QMP command chardev-add was added right before, with minimal features, and the idea to complete it step by step, then switch over the HMP command to use it. Unfortunately, we're not there, yet, and we don't want to release with chardev-add in a "HMP is more powerful than QMP" state. Disable the HMP command for now, along with its chardev-remove buddy. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06hmp: make memchar-read escape ASCII control chars except \n and \tMarkus Armbruster1-0/+2
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06qemu-char: Saner naming of memchar stuff & doc fixesMarkus Armbruster1-20/+17
New device, has never been released, so we can still improve things without worrying about compatibility. Naming is a mess. The code calls the device driver CirMemCharDriver, the public API calls it "memory", "memchardev", or "memchar", and the special commands are named like "memchar-FOO". "memory" is a particularly unfortunate choice, because there's another character device driver called MemoryDriver. Moreover, the device's distinctive property is that it's a ring buffer, not that's in memory. Therefore: * Rename CirMemCharDriver to RingBufCharDriver, and call the thing a "ringbuf" in the API. * Rename QMP and HMP commands from memchar-FOO to ringbuf-FOO. * Rename device parameter from maxcapacity to size (simple words are good for you). * Clearly mark the parameter as optional in documentation. * Fix error reporting so that chardev-add reports to current monitor, not stderr. * Replace cirmem in C identifiers by ringbuf. * Rework documentation. Document the impact of our crappy UTF-8 handling on reading. * QMP examples that even work. I could split this up into multiple commits, but they'd change the same documentation lines multiple times. Not worth it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-25QAPI: Introduce memchar-read QMP commandLei Li1-0/+21
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-25QAPI: Introduce memchar-write QMP commandLei Li1-0/+18
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-17HMP: add sub command table to infoWenchao Xia1-1/+2
Now info command takes a table of sub info commands, and changed do_info() to do_info_help() to do help funtion only. Note that now "info <unknown-topic>" returns error instead of list of info topics. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-16chardev: add hmp hotplug commandsGerd Hoffmann1-0/+32
Add chardev-add and chardev-remove commands to the human monitor. chardev-add accepts the same syntax as -chardev, chardev-remove expects a chardev id. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-16trace: Remove "info trace" from documentsLiming Wang1-7/+0
commit 88affa1c monitor: remove unused do_info_trace has removed "info trace" function from monitor, so remove it from documents. Signed-off-by: Liming Wang <walimisdev@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-11-12hmp: add NBD server commandsPaolo Bonzini1-0/+45
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-24qmp: add drive-mirror commandPaolo Bonzini1-0/+21
This adds the monitor commands that start the mirroring job. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24block: add block-job-completePaolo Bonzini1-1/+16
While streaming can be dropped as soon as it progressed through the whole image, mirroring needs to be completed manually for two reasons: 1) so that management knows exactly when the VM switches to the target; 2) because for other use cases such as replication, we may leave the operation running for the whole life of the virtual machine. Add a new block job command that manually completes background operations. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-04Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori1-3/+32
* kwolf/for-anthony: (30 commits) qemu-iotests: add tests for streaming error handling qemu-iotests: map underscore to dash in QMP argument names blkdebug: process all set_state rules in the old state stream: add on-error argument block: introduce block job error iostatus: reorganize io error code iostatus: change is_read to a bool iostatus: move BlockdevOnError declaration to QAPI iostatus: rename BlockErrorAction, BlockQMPEventAction qemu-iotests: add test for pausing a streaming operation qmp: add block-job-pause and block-job-resume block: add support for job pause/resume qmp: add 'busy' member to BlockJobInfo block: add block_job_query block: move job APIs to separate files block: fix documentation of block_job_cancel_sync qerror/block: introduce QERR_BLOCK_JOB_NOT_ACTIVE qemu-iotests: add initial tests for live block commit QAPI: add command for live block commit, 'block-commit' block: helper function, to find the base image of a chain ...
2012-09-28qmp: add block-job-pause and block-job-resumePaolo Bonzini1-3/+32
Add QMP commands matching the functionality. Paused jobs cannot be canceled without first resuming them. This ensures that I/O errors are never missed by management. However, an optional force argument can be specified to allow that. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-27hmp: dump-guest-memory: hardcode protocol argument to "file:"Luiz Capitulino1-5/+3
Today, it's necessary to specify the protocol you want to use when dumping the guest memory, for example: (qemu) dump-guest-memory file:/tmp/guest-memory This has a few issues: 1. It's cumbersome to type 2. We loose file path autocompletion 3. Being able to specify fd:X in HMP makes little sense for humans Because of these reasons, hardcode the 'protocol' argument to 'file:' in HMP. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-09-05qapi: convert screendumpLuiz Capitulino1-2/+1
Next commits will update devices to propagate errors. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05qapi: convert sendkeyAmos Kong1-1/+1
Convert 'sendkey' to use QAPI. QAPI passes key's index of mapping table to qmp_send_key(), not keycode. So we use help functions to convert key/code to index of key_defs, and 'index' will be converted to 'keycode' inside qmp_send_key(). For qmp, QAPI would check invalid key and raise error. For hmp, invalid key is checked in hmp_send_key(). 'send-key' of QMP doesn't support key in hexadecimal format. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05hmp: rename argumentsAmos Kong1-1/+1
Rename 'string' to 'keys', rename 'hold_time' to 'hold-time'. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05fix doc of using raw values with sendkeyAmos Kong1-3/+3
(qemu) sendkey a (qemu) sendkey 0x1e (qemu) sendkey #0x1e unknown key: '#0x1e' The last command doesn't work, '#' is not requested before raw values, and the raw value in decimal format is not supported. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-08-08Add migrate_set_cache_size commandOrit Wasserman1-0/+22
Change XBZRLE cache size in bytes (the size should be a power of 2, it will be rounded down to the nearest power of 2). If XBZRLE cache size is too small there will be many cache miss. New query-migrate-cache-size QMP command and 'info migrate_cache_size' HMP command to query cache value. Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com> Signed-off-by: Petter Svard <petters@cs.umu.se> Signed-off-by: Aidan Shribman <aidan.shribman@sap.com> Signed-off-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08Add migrate-set-capabilitiesOrit Wasserman1-0/+14
The management can enable/disable a capability for the next migration by using migrate-set-capabilities QMP command. The user can use migrate_set_capability HMP command. Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08Add migration capabilitiesOrit Wasserman1-0/+2
The management can query the current migration capabilities using query-migrate-capabilities QMP command. The user can use 'info migrate_capabilities' HMP command. Currently only XBZRLE capability is available. Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-06qapi: generalize documentation of streaming commandsPaolo Bonzini1-1/+1
Talk about background operations in general, rather than specifically about streaming. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-13qapi: Convert getfd and closefdCorey Bryant1-4/+2
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-04qapi: convert netdev_delLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-06-04qapi: convert netdev_addLuiz Capitulino1-2/+1
This is not a full QAPI conversion, but an intermediate step. In essence, do_netdev_add() is split into three functions: 1. netdev_add(): performs the actual work. This function is fully converted to Error (thus, it's "qapi-friendly") 2. qmp_netdev_add(): the QMP front-end for netdev_add(). This is coded by hand and not auto-generated (gen=no in the schema). The reason for this it's a lot easier and simpler to with QemuOpts this way 3. hmp_netdev_add(): HMP front-end. This design was suggested by Paolo Bonzini. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-06-04introduce a new monitor command 'dump-guest-memory' to dump guest's memoryWen Congyang1-0/+28
The command's usage: dump-guest-memory [-p] protocol [begin] [length] The supported protocol can be file or fd: 1. file: the protocol starts with "file:", and the following string is the file's path. 2. fd: the protocol starts with "fd:", and the following string is the fd's name. Note: 1. If you want to use gdb to process the core, please specify -p option. The reason why the -p option is not default is: a. guest machine in a catastrophic state can have corrupted memory, which we cannot trust. b. The guest machine can be in read-mode even if paging is enabled. For example: the guest machine uses ACPI to sleep, and ACPI sleep state goes in real-mode. 2. If you don't want to dump all guest's memory, please specify the start physical address and the length. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-04-27block: add 'speed' optional parameter to block-streamStefan Hajnoczi1-2/+2
Allow streaming operations to be started with an initial speed limit. This eliminates the window of time between starting streaming and issuing block-job-set-speed. Users should use the new optional 'speed' parameter instead so that speed limits are in effect immediately when the job starts. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-04-27block: change block-job-set-speed argument from 'value' to 'speed'Stefan Hajnoczi1-2/+2
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-04-20fix block_job_set_speed name in documentationPaolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-04-09qapi: convert device_delLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-15qapi: Convert migrateLuiz Capitulino1-2/+1
The migrate command is one of those commands where HMP and QMP completely mix up together. This made the conversion to the QAPI (which separates the command into QMP and HMP parts) a bit difficult. The first important change to be noticed is that this commit completes the removal of the Monitor object from migration code, started by the previous commit. Another important and tricky change is about supporting the non-detached mode. That is, if the user doesn't pass '-d' the migrate command will lock the monitor and will only release it when migration is finished. To support this in the new HMP command (hmp_migrate()), it is necessary to create a timer which runs every second and checks if the migration is still active. If it is, the timer callback will re-schedule itself to run one second in the future. If the migration has already finished, the monitor lock is released and the user can use it normally. All these changes should be transparent to the user. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-12qmp: convert blockdev-snapshot-sync to a wrapper around transactionsPaolo Bonzini1-3/+6
Simplify the blockdev-snapshot-sync code and gain failsafe operation by turning it into a wrapper around the new transaction command. A new option is also added matching "mode". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-03-03Merge branch 'xtensa' of git://jcmvbkbc.spb.ru/dumb/qemu-xtensaBlue Swirl1-1/+1
* 'xtensa' of git://jcmvbkbc.spb.ru/dumb/qemu-xtensa: target-xtensa: add breakpoint tests target-xtensa: add DEBUG_SECTION to overlay tool target-xtensa: add DBREAK data breakpoints exec: let cpu_watchpoint_insert accept larger watchpoints exec: fix check_watchpoint exiting cpu_loop exec: add missing breaks to the watch_mem_write target-xtensa: add ICOUNT SR and debug exception target-xtensa: implement instruction breakpoints target-xtensa: add DEBUGCAUSE SR and configuration target-xtensa: fetch 3rd opcode byte only when needed target-xtensa: implement info tlb monitor command target-xtensa: define TLB_TEMPLATE for MMU-less cores
2012-02-24suspend: add system_wakeup monitor commandGerd Hoffmann1-0/+14
This patch adds the system_wakeup monitor command which will simply wake up suspended guests. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-18target-xtensa: implement info tlb monitor commandMax Filippov1-1/+1
Command dumps valid ITLB and DTLB entries. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2012-01-26qmp: add block_job_cancel commandStefan Hajnoczi1-0/+14
Add block_job_cancel, which stops an active block streaming operation. When the operation has been cancelled the new BLOCK_JOB_CANCELLED event is emitted. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qmp: add block_job_set_speed commandStefan Hajnoczi1-0/+14
Add block_job_set_speed, which sets the maximum speed for a background block operation. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26qmp: add block_stream commandStefan Hajnoczi1-0/+13
Add the block_stream command, which starts copy backing file contents into the image file. Also add the BLOCK_JOB_COMPLETED QMP event which is emitted when image streaming completes. Later patches add control over the background copy speed, cancelation, and querying running streaming operations. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-18qapi: Convert block_set_io_throttleLuiz Capitulino1-2/+1
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert changeLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert ejectLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert expire_passwordLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18qapi: Convert set_passwordLuiz Capitulino1-2/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-04Expose drive_add on all architecturesAlexander Graf1-2/+0
All architectures can now use drive_add on the monitor. This of course does not mean that there is hotplug support for the specific platform, so in order to actually make use of the new drives you still need to have a hotplug capable device. Signed-off-by: Alexander Graf <agraf@suse.de>