summaryrefslogtreecommitdiff
path: root/hmp.h
AgeCommit message (Collapse)AuthorFilesLines
2015-11-10migrate_start_postcopy: Command to trigger transition to postcopyDr. David Alan Gilbert1-0/+1
Once postcopy is enabled (with migrate_set_capability), the migration will still start on precopy mode. To cause a transition into postcopy the: migrate_start_postcopy command must be issued. Postcopy will start sometime after this (when it's next checked in the migration loop). Issuing the command before migration has started will error, and issuing after it has finished is ignored. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-09-04hmp: add info iothreads commandTing Wang1-0/+1
Make "info iothreads" available on the HMP monitor. For example, the results are as follows when executing qemu command with "-object iothread,id=iothread-1 -object iothread,id=iothread-2". (qemu) info iothreads iothread-1: thread_id=123 iothread-2: thread_id=456 Signed-off-by: Ting Wang <kathy.wangting@huawei.com> Message-Id: <1435306033-58372-1-git-send-email-kathy.wangting@huawei.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Amos Jianjun Kong <kongjianjun@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-03trace-events: Add hmp completionDr. David Alan Gilbert1-0/+1
Add completion for the trace event names in the hmp trace-event command. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1439548063-18410-1-git-send-email-dgilbert@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12qmp/hmp: add rocker device supportScott Feldman1-0/+4
Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-02monitor: Use traditional command interface for HMP device_addMarkus Armbruster1-0/+1
All QMP commands use the "new" handler interface (mhandler.cmd_new). Most HMP commands still use the traditional interface (mhandler.cmd), but a few use the "new" one. Complicates handle_user_command() for no gain, so I'm converting these to the traditional interface. For device_add, that's easy: just wrap the obvious hmp_device_add() around do_device_add(). monitor_user_noop() is now unused, drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Convert client_migrate_info to QAPIMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-05-07migration: Add hmp interface to set and query parametersLiang Li1-0/+4
Add the hmp interface to tune and query the parameters used in live migration. Signed-off-by: Liang Li <liang.z.li@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-04-30monitor: Remove unused functionsThomas Huth1-1/+0
The functions ringbuf_read_completion() and monitor_get_rs() are not used anywhere anymore, so let's remove them. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-17qom: Implement qom-set HMP commandAndreas Färber1-0/+1
Re-implemented based on qmp_qom_set() to facilitate argument parsing. Warn about ambiguous path arguments. Reviewed-by: Gonglei <arei.gonglei@huawei.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-17qom: Implement qom-list HMP commandAndreas Färber1-0/+1
Implement it as a wrapper for QMP qom-list, but mimic the behavior of scripts/qmp/qom-list in making the path argument optional and listing the root if absent, to hint users what kind of path to pass. Reviewed-by: Gonglei <arei.gonglei@huawei.com> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-16Add migrate_incomingDr. David Alan Gilbert1-0/+1
Add migrate_incoming/migrate-incoming to start an incoming migration. Once a qemu has been started with -incoming defer the migration can be started by issuing: migrate_incoming uri Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-02-18hmp: Name HMP command handler functions hmp_COMMAND()Markus Armbruster1-3/+3
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(), and sometimes COMMAND pointlessly differs in spelling. Normalize to hmp_COMMAND(), where COMMAND is exactly the command name with '-' replaced by '_'. Exceptions: * do_device_add() and client_migrate_info() *not* renamed to hmp_device_add(), hmp_client_migrate_info(), because they're also QMP handlers. They still need to be converted to QAPI. * do_memory_dump(), do_physical_memory_dump(), do_ioport_read(), do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(), hmp_i(), hmp_o(), because those names are too cryptic for my taste. * do_info_help() renamed to hmp_info_help() instead of hmp_info(), because it only covers help. Signed-off-by: Markus Armbruster <armbru@redhat.com>
2014-09-26Add HMP command "info memory-devices"Zhu Guihua1-0/+1
Provides HMP equivalent of QMP query-memory-devices command. Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-By: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-19hmp: add info memdevHu Tao1-0/+1
This is the hmp counterpart of qmp query-memdev. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: fix build on 32 bit
2014-06-11monitor: Add delvm and loadvm argument completionHani Benhabiles1-0/+2
Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11monitor: Add host_net_remove arguments completionHani Benhabiles1-0/+2
Relies on readline unique completion strings patch to make the added vlan/hub completion values unique, instead of using something like a hash table. Signed-off-by: Hani Benhabiles <hani@linux.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11monitor: Add host_net_add device argument completionHani Benhabiles1-0/+1
Also fix the parameters documentation. Signed-off-by: Hani Benhabiles <hani@linux.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11monitor: Add migrate_set_capability completionHani Benhabiles1-0/+2
Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11monitor: Add watchdog_action argument completionHani Benhabiles1-0/+2
Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11monitor: Add ringbuf_write and ringbuf_read argument completionHani Benhabiles1-0/+2
Export chr_is_ringbuf() function. Also remove left-over function prototypes while at it. Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15monitor: Add netdev_del id argument completion.Hani Benhabiles1-0/+1
Signed-off-by: Hani Benhabiles <hani@linux.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15monitor: Add netdev_add type argument completion.Hani Benhabiles1-0/+1
Also update the command's documentation. Signed-off-by: Hani Benhabiles <hani@linux.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15monitor: Add set_link arguments completion.Hani Benhabiles1-0/+1
Make it possible to query all net clients without specifying an ID when calling qemu_find_net_clients_except(). This also adds the add_completion_option() function which is to be used for other commands completions as well. Signed-off-by: Hani Benhabiles <hani@linux.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15monitor: Add chardev-add backend argument completion.Hani Benhabiles1-0/+1
Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15monitor: Add chardev-remove command completion.Hani Benhabiles1-0/+1
Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15monitor: Convert sendkey to use command_completion.Hani Benhabiles1-0/+1
Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25monitor: Add device_add and device_del completion.Hani Benhabiles1-0/+2
Also fix device_add completion including non-hotpluggable devices. Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25monitor: Add command_completion callback to mon_cmd_t.Hani Benhabiles1-0/+3
Convert object_add and object_del commands to use the new callback. Signed-off-by: Hani Benhabiles <hani@linux.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06monitor: add object-add (QMP) and object_add (HMP) commandPaolo Bonzini1-0/+1
Add two commands that are the monitor counterparts of -object. The commands have the same Visitor-based implementation, but use different kinds of visitors so that the HMP command has a DWIM string-based syntax, while the QMP variant accepts a stricter JSON-based properties dictionary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06monitor: add object-del (QMP) and object_del (HMP) commandPaolo Bonzini1-0/+1
These two commands invoke the "unparent" method of Object. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06qemu-monitor: HMP cpu-add wrapperJason J. Herne1-0/+1
Add HMP cpu-add wrapper to allow cpu hot plugging via monitor. Signed-off-by: Jason J. Herne <jjherne@us.ibm.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-09-12hmp: add interface hmp_snapshot_delete_blkdev_internalWenchao Xia1-0/+1
It is hard to make both id and name optional in hmp console as qmp interface, so this interface require user to specify name. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12hmp: add interface hmp_snapshot_blkdev_internalWenchao Xia1-0/+1
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-15block: add drive_backup HMP commandStefan Hajnoczi1-0/+1
Make "drive_backup" available on the HMP monitor: drive_backup [-n] [-f] device target [format] The -n flag requests QEMU to reuse the image found in new-image-file, instead of recreating it from scratch. The -f flag requests QEMU to copy the whole disk, so that the result does not need a backing file. Note that this flag *must* currently be passed since the other sync modes ('none' and 'top') have not been implemented yet. Requiring it ensures that "drive_backup" behaves like "drive_mirror". Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-06Make qemu-io commands available in HMPKevin Wolf1-0/+1
It was decided to not make this command available in QMP in order to make clear that this is not supposed to be a stable API and should be used only for testing and debugging purposes. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-12Revert "New QMP command query-cpu-max and HMP command cpu_max"Michal Novotny1-1/+0
This reverts commit 4d700430a20b3d53b7b15bc5f6666f7e570e3f2c as asked by Luiz. The patch has been obsoleted by extending MachineInfo structure by cpu-max field. Signed-off-by: Michal Novotny <minovotn@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-25New QMP command query-cpu-max and HMP command cpu_maxMichal Novotny1-0/+1
These commands return the maximum number of CPUs supported by the currently running emulator instance, as defined in its QEMUMachine struct. Signed-off-by: Michal Novotny <minovotn@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-12Support for TPM command line optionsStefan Berger1-0/+1
This patch adds support for TPM command line options. The command line options supported here are ./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id> -device tpm-tis,tpmdev=<id>,id=<other id> and ./qemu-... -tpmdev help where the latter works similar to -soundhw help and shows a list of available TPM backends (for example 'passthrough'). Using the type parameter, the backend is chosen, i.e., 'passthrough' for the passthrough driver. The interpretation of the other parameters along with determining whether enough parameters were provided is pushed into the backend driver, which needs to implement the interface function 'create' and return a TPMDriverOpts structure if the VM can be started or 'NULL' if not enough or bad parameters were provided. Monitor support for 'info tpm' has been added. It for example prints the following: (qemu) info tpm TPM devices: tpm0: model=tpm-tis \ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06qemu-char: Saner naming of memchar stuff & doc fixesMarkus Armbruster1-2/+2
New device, has never been released, so we can still improve things without worrying about compatibility. Naming is a mess. The code calls the device driver CirMemCharDriver, the public API calls it "memory", "memchardev", or "memchar", and the special commands are named like "memchar-FOO". "memory" is a particularly unfortunate choice, because there's another character device driver called MemoryDriver. Moreover, the device's distinctive property is that it's a ring buffer, not that's in memory. Therefore: * Rename CirMemCharDriver to RingBufCharDriver, and call the thing a "ringbuf" in the API. * Rename QMP and HMP commands from memchar-FOO to ringbuf-FOO. * Rename device parameter from maxcapacity to size (simple words are good for you). * Clearly mark the parameter as optional in documentation. * Fix error reporting so that chardev-add reports to current monitor, not stderr. * Replace cirmem in C identifiers by ringbuf. * Rework documentation. Document the impact of our crappy UTF-8 handling on reading. * QMP examples that even work. I could split this up into multiple commits, but they'd change the same documentation lines multiple times. Not worth it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-25QAPI: Introduce memchar-read QMP commandLei Li1-0/+1
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-25QAPI: Introduce memchar-write QMP commandLei Li1-0/+1
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-17HMP: add QDict to info callback handlerWenchao Xia1-18/+18
This patch change all info call back function to take additional QDict * parameter, which allow those command take parameter. Now it is set to NULL at default case. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-16chardev: add hmp hotplug commandsGerd Hoffmann1-0/+2
Add chardev-add and chardev-remove commands to the human monitor. chardev-add accepts the same syntax as -chardev, chardev-remove expects a chardev id. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-12-19qapi: move include files to include/qobject/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-12hmp: add NBD server commandsPaolo Bonzini1-0/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-24qmp: add drive-mirror commandPaolo Bonzini1-0/+1
This adds the monitor commands that start the mirroring job. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24block: add block-job-completePaolo Bonzini1-0/+1
While streaming can be dropped as soon as it progressed through the whole image, mirroring needs to be completed manually for two reasons: 1) so that management knows exactly when the VM switches to the target; 2) because for other use cases such as replication, we may leave the operation running for the whole life of the virtual machine. Add a new block job command that manually completes background operations. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28qmp: add block-job-pause and block-job-resumePaolo Bonzini1-0/+2
Add QMP commands matching the functionality. Paused jobs cannot be canceled without first resuming them. This ensures that I/O errors are never missed by management. However, an optional force argument can be specified to allow that. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-05qapi: convert screendumpLuiz Capitulino1-0/+1
Next commits will update devices to propagate errors. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05qapi: convert sendkeyAmos Kong1-0/+1
Convert 'sendkey' to use QAPI. QAPI passes key's index of mapping table to qmp_send_key(), not keycode. So we use help functions to convert key/code to index of key_defs, and 'index' will be converted to 'keycode' inside qmp_send_key(). For qmp, QAPI would check invalid key and raise error. For hmp, invalid key is checked in hmp_send_key(). 'send-key' of QMP doesn't support key in hexadecimal format. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>