summaryrefslogtreecommitdiff
path: root/hw/ide/internal.h
AgeCommit message (Collapse)AuthorFilesLines
2013-11-05ide: Drop ide_init2_with_non_qdev_drives()Andreas Färber1-2/+0
All its users have finally been converted. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30ide: Pass size to ide_bus_new()Andreas Färber1-1/+2
To be passed to qbus_create_inplace(). Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-15ahci: Fix FLUSH commandKevin Wolf1-0/+1
AHCI couldn't cope with asynchronous commands that aren't doing DMA, it simply wouldn't complete them. Due to the bug fixed in commit f68ec837, FLUSH commands would seem to have completed immediately even if they were still running on the host. After the commit, they would simply hang and never unset the BSY bit, rendering AHCI unusable on any OS sending flushes. This patch adds another callback for the completion of asynchronous commands. This is what AHCI really wants to use for its command completion logic rather than an DMA completion callback. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-08ahci: Don't allow creating slave drivesKevin Wolf1-1/+2
An IDE bus provided by AHCI can only take a single IDE drive. If you add a drive as slave, qemu used to accept the command line but the device wouldn't be actually usable. Catch the situation instead and error out. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-15include: avoid useless includes of exec/ headersPaolo Bonzini1-1/+0
Headers in include/exec/ are for the deepest innards of QEMU, they should almost never be included directly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move headers to include/Paolo Bonzini1-3/+3
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19exec: move include files to include/exec/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-10ahci: Fix ahci cdrom read corruptions for reads > 128kJason Baron1-0/+1
While testing q35, which has its cdrom attached to the ahci controller, I found that the Fedora 17 install would panic on boot. The panic occurs while squashfs is trying to read from the cdrom. The errors are: [ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt [ 8.625180] SQUASHFS error: squashfs_read_data failed to read block 0x20be48a I was also able to produce corrupt data reads using an installed piix based qemu machine, using 'dd'. I found that the corruptions were only occuring when then read size was greater than 128k. For example, the following command results in corrupted reads: dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct The > 128k size reads exercise a different code path than 128k and below. In ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus, ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k. However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k. Thus, resulting in a corrupted read. To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep track of the offset. I've also modified ahci_populate_sglist() to take a new 3rd offset argument, so that the sglist is property initialized. I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots and installs on q35 with the cdrom ahci controller. Signed-off-by: Jason Baron <jbaron@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17hw/block-common: Move BlockConf & friends from block.hMarkus Armbruster1-0/+1
This stuff doesn't belong to block layer, and was put there only because a better home didn't exist then. Now it does. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17ide: qdev property for BIOS CHS translationMarkus Armbruster1-0/+1
This isn't quite orthodox. CHS translation is firmware configuration, communicated via the RTC's CMOS RAM, not a property of the disk. But it's best to treat it just like geometry anyway. Maintain backward compatibility exactly like for geometry: fall back to DriveInfo's translation, set with -drive trans=... Bonus: info qtree now shows the translation. Except when it shows "auto": that's resolved by pc_cmos_init_late(). To be addressed shortly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17ide: qdev properties for disk geometryMarkus Armbruster1-1/+3
Geometry needs to be qdev properties, because it belongs to the disk's guest part. Maintain backward compatibility exactly like for serial: fall back to DriveInfo's geometry, set with -drive cyls=... Do this only for ide-hd. ide-drive is legacy. ide-cd doesn't have a geometry. Bonus: info qtree now shows the geometry. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17ide pc: Cut out the block layer geometry middlemanMarkus Armbruster1-1/+1
PC BIOS setup needs IDE geometry information. Get it directly from the device model rather than through the block layer. In preparation of purging geometry from the block layer, which will happen later in this series. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-18qdev: Convert busses to QEMU Object ModelAnthony Liguori1-0/+3
This is far less interesting than it sounds. We simply add an Object to each BusState and then register the types appropriately. Most of the interesting refactoring will follow in the next patches. Since we're changing fundamental type names (BusInfo -> BusClass), it all needs to convert at once. Fortunately, not a lot of code is affected. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [AF: Made all new bus TypeInfos static const.] [AF: Made qbus_free() call object_delete(), required {qom,glib}_allocated] Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-19ide: convert ide_sector_read() to asynchronous I/OStefan Hajnoczi1-0/+3
The IDE PIO interface currently uses bdrv_read() to perform reads synchronously. Synchronous I/O in the vcpu thread is bad because it prevents the guest from executing code - it makes the guest unresponsive. This patch converts IDE PIO to use bdrv_aio_readv(). We simply need to use the BUSY_STAT status so the guest knows to wait while we are busy. The only external user of ide_sector_read() is restart behavior on I/O errors and it is not affected by this change. We still need to restart I/O in the same way. Migration is also unaffected if I understand the code correctly. We continue to use the same transfer function and the BUSY_STAT status should never be migrated since we flush I/O before migrating device state. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Tested-by: Richard Davies <richard@arachsys.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05ide: Adds wwn=hex qdev optionFloris Bos1-1/+4
Allow the user to specify a disk's World Wide Name. Linux guests can address disks by their unique World Wide Name number (e.g. /dev/disk/by-id/wwn-0x5001517959123522). This patch adds support for assigning a World Wide Name number to a virtual IDE disk. Cc: kwolf@redhat.com Signed-off-by: Floris Bos <dev@noc-ps.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05ide: Add "model=s" qdev optionFloris Bos1-1/+3
Allow the user to override the default disk model name "QEMU HARDDISK". Some Linux distributions use the /dev/disk/by-id/scsi-SATA_name-of-disk- model_serial addressing scheme when refering to partitions in /etc/fstab and elsewhere. This causes problems when starting a disk image taken from an existing physical server under qemu, because when running under qemu name-of-disk-model is always "QEMU HARDDISK". This patch introduces a model=s option which in combination with the existing serial=s option can be used to fake the disk the operating system was previously on, allowing the OS to boot properly. Cc: kwolf@redhat.com Signed-off-by: Floris Bos <dev@noc-ps.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-27ide: convert to QEMU Object ModelAnthony Liguori1-7/+13
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-28atapi/scsi: unify definitions for MMCPaolo Bonzini1-70/+1
The definitions in ide/internal.h are duplicates, since ATAPI commands actually come from SCSI. Use the ones in scsi-defs.h and move the missing ones there. Two exceptions: - MODE_PAGE_WRITE_PARMS conflicts with the "flexible disk geometry" page in scsi-disk.c. It is unused, so pick the latter. - GPCMD_* is left in ide/internal.h, at least for now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-11ide: Convert to isa_register_portio_listRichard Henderson1-1/+2
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-15Replace the VMSTOP macros with a proper state typeLuiz Capitulino1-1/+2
Today, when notifying a VM state change with vm_state_notify(), we pass a VMSTOP macro as the 'reason' argument. This is not ideal because the VMSTOP macros tell why qemu stopped and not exactly what the current VM state is. One example to demonstrate this problem is that vm_start() calls vm_state_notify() with reason=0, which turns out to be VMSTOP_USER. This commit fixes that by replacing the VMSTOP macros with a proper state type called RunState. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-09-12block: Move BlockConf & friends from block_int.h to block.hMarkus Armbruster1-1/+0
It's convenience stuff for block device models, so block.h isn't the ideal home either, but better than block_int.h. Permits moving some #include "block_int.h" from device model .h into .c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Track tray locked stateMarkus Armbruster1-0/+1
We already track it in BlockDriverState. Just like tray open/close state, we should track it in the device models instead, because it's device state. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Track tray open/close stateMarkus Armbruster1-0/+1
We already track it in BlockDriverState since commit 4be9762a. As discussed in that commit's message, we should track it in the device device models instead, because it's device state. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06ide: Update command code definitions as per ACS-2 Table B.2Markus Armbruster1-81/+90
Drop WIN_SRST, it has the same value as WIN_DEVICE_RESET. Drop unused WIN_RESTORE, it has the same value as WIN_RECAL. Drop codes that are not implemented and long obsolete: WIN_READ_LONG, WIN_READ_LONG_ONCE, WIN_WRITE_LONG, WIN_WRITE_LONG_ONCE, WIN_FORMAT (all obsolete since ATA4), WIN_ACKMEDIACHANGE, WIN_POSTBOOT, WIN_PREBOOT (obsolete since ATA3), WIN_WRITE_SAME (obsolete since ATA3, code reused for something else in ACS2), WIN_IDENTIFY_DMA (obsolete since ATA4). Drop codes that are not implemented and vendor-specific: EXABYTE_ENABLE_NEST, DISABLE_SEAGATE. Drop WIN_INIT, it isn't implemented, its value used to be reserved, and is used for something else since ATA8. CFA_IDLEIMMEDIATE isn't specific to CFATA. ACS-2 shows it as a defined command in ATA-1, -2 and -3. Rename to WIN_IDLEIMMEDIATE2. Mark vendor specific, retired, and obsolete codes. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-25block: explicit I/O accountingChristoph Hellwig1-0/+1
Decouple the I/O accounting from bdrv_aio_readv/writev/flush and make the hardware models call directly into the accounting helpers. This means: - we do not count internal requests from image formats in addition to guest originating I/O - we do not double count I/O ops if the device model handles it chunk wise - we only account I/O once it actuall is done - can extent I/O accounting to synchronous or coroutine I/O easily - implement I/O latency tracking easily (see the next patch) I've conveted the existing device model callers to the new model, device models that are using synchronous I/O and weren't accounted before haven't been updated yet. Also scsi hasn't been converted to the end-to-end accounting as I want to defer that after the pending scsi layer overhaul. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15ide: add TRIM supportChristoph Hellwig1-1/+13
Add support for TRIM sub function of the data set management command, and wire it up to the qemu discard infrastructure. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15ide: allow other dma comands than read and writeChristoph Hellwig1-1/+9
Replace the is_read flag with a dma_cmd flag to allow the dma and restart logic to handler other commands like TRIM. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15ide: Split error status from status registerKevin Wolf1-0/+8
When adding the werror=stop mode, some flags were added to s->status which are used to determine what kind of operation should be restarted when the VM is continued. Unfortunately, it turns out that s->status is in fact a device register and as such is visible to the guest (some of the abused bits are even writable for the guest). For migration we keep on using the old VMState field (renamed to migration_compat_status) if the status register doesn't use any of the previously abused bits. If it does, we use a subsection with a clean copy of the status register. The error status is always sent in a subsection if there is any error. It can't use the old field because errors happen even without PCI. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-05-19ide: Split qdev "ide-drive" into "ide-hd" and "ide-cd"Markus Armbruster1-1/+1
An "ide-drive" is either a hard disk or a CD-ROM, depending on the associated BlockDriverState's type hint. Unclean; disk vs. CD belongs to the guest part, not the host part. Have separate qdevs "ide-hd" and "ide-cd" to model disk vs. CD in the guest part. Keep ide-drive for backward compatibility. "ide-disk" would perhaps be a nicer name than "ide-hd", but there's already "scsi-disk", which is like "ide-drive", and will be likewise split in the next commit. {ide,scsi}-{hd,cd} is the best consistent set of names I could find within the backward compatibility straightjacket. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-27ide: Split atapi.c outKevin Wolf1-0/+10
Besides moving code, this patch only fixes some whitespace issues in the moved code and makes all functions in atapi.c static which can be static. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-13atapi: GESN: implement 'media' subcommandAmit Shah1-0/+6
Implement the 'media' sub-command of the GET_EVENT_STATUS_NOTIFICATION command. This helps us report tray open, tray closed, no media, media present states to the guest. Newer Linux kernels (2.6.38+) rely on this command to revalidate discs after media change. This patch also sends out tray open/closed status to the guest driver when requested e.g. via the CDROM_DRIVE_STATUS ioctl (thanks Markus). Without such notification, the guest and qemu's tray open/close status was frequently out of sync, causing installers like Anaconda detecting no disc instead of tray open, confusing them terribly. Signed-off-by: Amit Shah <amit.shah@redhat.com> Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24ide: factor dma handling helpersChristoph Hellwig1-3/+1
Factor the DMA I/O path that is duplicated between read and write commands, into common helpers using the s->is_read flag added for the macio ATA controller. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: add ncq identify data for ahci sata drivesRoland Elek1-0/+2
I modified ide_identify() to include the zero-based queue length value in word 75, and set bit 8 in word 76 to signal NCQ support in the identify data for AHCI SATA drives. Signed-off-by: Roland Elek <elek.roland@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: Split out BMDMA code from ATA coreAlexander Graf1-37/+32
The ATA core is currently heavily intertwined with BMDMA code. Let's loosen that a bit, so we can happily replace the DMA backend with different implementations. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: split ide command interpretation offAlexander Graf1-0/+2
The ATA command interpretation code can be used for PATA and SATA interfaces alike. So let's split it out into a separate function. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-11Store IDE bus id in IDEBus structure for easy access.Gleb Natapov1-1/+2
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-11-24ide: convert bmdma address ioport to ioport_register()Avi Kivity1-0/+2
cmd646, via compile tested, pci lightly boot tested. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-10-22ide: Handle flush failureKevin Wolf1-1/+2
Instead of always assuming success for bdrv_aio_flush, actually do something with the error. This respects the werror option and accordingly ignores the error, reports it to the guest or stops the VM and retries after cont. Ignoring the error is trivial, obviously. For stopping the VM and retrying later old code can be reused, but we need to introduce a new status for "retry a flush". For reporting to the guest, fortunately the same action is required as for a failed read/write (status = DRDY | ERR, error = ABRT), so this code can be reused as well. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-26ide: fix migration in the middle of pio operationJuan Quintela1-0/+5
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-26Revert "ide save/restore pio/atapi cmd transfer fields and io buffer"Juan Quintela1-5/+0
This reverts commit ed487bb1d69040b9dac64a4fc076d8dd82b131d6. The conflicts are due to commit 4fc8d6711aff7a9c11e402c3d77b481609f9f486 that is a fix to the ide_drive_pre_save() function. It reverts both (and both are reinstantiated later in the series) Conflicts: hw/ide/core.c Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06ide: Make ide_init_drive() return successMarkus Armbruster1-2/+2
It still always succeeds. The next commits will add failures. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-06ide: Replace IDEState members is_cdrom, is_cf by drive_kindMarkus Armbruster1-2/+3
The two aren't independent variables. Make that obvious. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02qdev: Decouple qdev_prop_drive from DriveInfoMarkus Armbruster1-1/+1
Make the property point to BlockDriverState, cutting out the DriveInfo middleman. This prepares the ground for block devices that don't have a DriveInfo. Currently all user-defined ones have a DriveInfo, because the only way to define one is -drive & friends (they go through drive_init()). DriveInfo is closely tied to -drive, and like -drive, it mixes information about host and guest part of the block device. I'm working towards a new way to define block devices, with clean host/guest separation, and I need to get DriveInfo out of the way for that. Fortunately, the device models are perfectly happy with BlockDriverState, except for two places: ide_drive_initfn() and scsi_disk_initfn() need to check the DriveInfo for a serial number set with legacy -drive serial=... Use drive_get_by_blockdev() there. Device model code should now use DriveInfo only when explicitly dealing with drives defined the old way, i.e. without -device. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04ide: Turn drive serial into a qdev property ide-drive.serialMarkus Armbruster1-1/+3
It needs to be a qdev property, because it belongs to the drive's guest part. Bonus: info qtree now shows the serial number. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04ide: Split non-qdev code off ide_init2()Markus Armbruster1-2/+3
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04ide: Remove redundant IDEState member confMarkus Armbruster1-3/+1
Commit 428c149b added IDEState member conf to let commit 0009baf1 find the BlockConf from there. It exists only for qdev drives, created via ide_drive_initfn(), not for drives created via ide_init2(). But for a qdev drive, we can just as well reach its IDEDevice, which contains the BlockConf. Do that, and revert the parts of commit 428c149b that add IDEState member conf. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04ide: Remove useless IDEDeviceInfo members unit, driveMarkus Armbruster1-2/+0
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-01cmd646: pass pci_dev as it needs itIgor V. Kovalenko1-1/+0
Instead of doing tricks to get the pci_dev, just pass it in the 1st place. Patch is a bit longer that reverting the pci_dev field, but it states more clearly (IMHO) what we are doing. It also fixes the bm test, now that you told me that ->unit is not always valid. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-19ide save/restore pio/atapi cmd transfer fields and io bufferMarcelo Tosatti1-0/+5
Save/restore information necessary to continue in progress PIO/ATAPI CMD transfers. This includes the IO buffer. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-05-09 05:42:14 +0000