summaryrefslogtreecommitdiff
path: root/hw/ide/macio.c
AgeCommit message (Collapse)AuthorFilesLines
2013-08-30ide: Pass size to ide_bus_new()Andreas Färber1-1/+1
To be passed to qbus_create_inplace(). Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-27PPC: dbdma: macio: Fix format specifiers (build regression)Stefan Weil1-4/+5
Fix a number of warnings for 32 bit builds (tested on MingW and Linux): CC hw/ide/macio.o qemu/hw/ide/macio.c: In function 'pmac_ide_atapi_transfer_cb': qemu/hw/ide/macio.c:134:9: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'hwaddr' [-Werror=format] qemu/hw/ide/macio.c: In function 'pmac_ide_transfer_cb': qemu/hw/ide/macio.c:215:5: error: format '%ld' expects argument of type 'long int', but argument 5 has type 'int64_t' [-Werror=format] qemu/hw/ide/macio.c:222:9: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'hwaddr' [-Werror=format] qemu/hw/ide/macio.c:264:9: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'hwaddr' [-Werror=format] cc1: all warnings being treated as errors make: *** [hw/ide/macio.o] Error 1 Signed-off-by: Stefan Weil <sw@weilnetz.de> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-11PPC: dbdma: Support more multi-issue DMA requestsAlexander Graf1-2/+2
A DMA request can happen for data that hasn't been completely been provided by the IDE core yet. For example - DBDMA request for 0x1000 bytes - IDE request for 1 sector - DBDMA wants to read 0x1000 bytes (8 sectors) from bdrv - breakage Instead, we should truncate our bdrv request to the maximum number of sectors we're allowed to read at that given time. Once that transfer is through, we will fall into our recently introduced waiting logic. - DBDMA requests for 0x1000 bytes - IDE request for 1 sector - DBDMA wants to read MIN(0x1000, 1 * 512) bytes - DBDMA finishes reading, indicates to IDE core that transfer is complete - IDE request for 7 sectors - DBDMA finishes the DMA Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11PPC: dbdma: Support unaligned DMA accessAlexander Graf1-7/+124
The DBDMA engine really just reads bytes from a producing device (IDE in our case) and shoves these bytes into memory. It doesn't care whether any alignment takes place or not. Our code today however assumes that block accesses always happen on sector (512 byte) boundaries. This is a fair assumption for most cases. However, Mac OS X really likes to do unaligned, incomplete accesses that it finishes with the next DMA request. So we need to read / write the unaligned bits independent of the actual asynchronous request, because that one can only handle 512-byte-aligned data. We also need to cache these unaligned sectors until the next DMA request, at which point the data might be successfully flushed from the pipe. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11PPC: dbdma: Wait for DMA until we have dataAlexander Graf1-0/+19
We should only start processing DMA requests when we have data to process. Hold off working through the DMA shuffling until the IDE core told us that it's ready. This is required because the guest can program the DMA engine or the IDE transfer first. Both are legal. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11PPC: dbdma: macio: Add DMA callbackAlexander Graf1-0/+40
We need to know when the IDE core starts a DMA transfer. Add a notifier function so we have the chance to start transmitting data. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11PPC: Mac: Add debug prints in macio and dbdma codeAlexander Graf1-3/+40
The macio code is basically undebuggable as it stands today, with no debug prints anywhere whatsoever. DBDMA was better, but I needed a few more to create reasonable logs that tell me where breakage is. Add a DPRINTF macro in the macio source file and add a bunch of debug prints that are all disabled by default of course. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11PPC: Macio: Replace tabs with spacesAlexander Graf1-4/+4
s/^I/ /g on the file. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11PPC: g3beige: Move secondary IDE bus to mac-ioAlexander Graf1-1/+1
On a real G3 Beige the secondary IDE bus lives on the mac-io chip, not on some random PCI device. Move it there to become more compatible. While at it, also clean up the IDE channel connection logic. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-04hw/i*: pass owner to memory_region_init* functionsPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04memory: add owner argument to initialization functionsPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04dma: keep a device alive while it has SGListsPaolo Bonzini1-2/+2
Reviewed-by: Anthony Liguori <aliguori@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-20dma: eliminate DMAContextPaolo Bonzini1-2/+2
The DMAContext is a simple pointer to an AddressSpace that is now always already available. Make everyone hold the address space directly, and clean up the DMA API to use the AddressSpace directly. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-20ide/macio: fix wrong opaque with TRIM supportAurelien Jarno1-1/+1
Commit 215e47b9 enabled TRIM by default, which revealed a bug in TRIM support for the IDE macio emulation driver, introduced in d353fb72. The call to dma_bdrv_io() is using a wrong opaque of type IDEState instead of DBDMA_io. This patch fixes that. Fixes LP#1179104 Reported-by: Michael Tokarev <mjt@tls.msk.ru> Tested-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-05-08ahci: Don't allow creating slave drivesKevin Wolf1-1/+1
An IDE bus provided by AHCI can only take a single IDE drive. If you add a drive as slave, qemu used to accept the command line but the device wouldn't be actually usable. Catch the situation instead and error out. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-04-08hw: move headers to include/Paolo Bonzini1-1/+1
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-25ide/macio: QOM'ify MacIO IDEAndreas Färber1-22/+56
It was not qdev'ified before. Turn it into a SysBusDevice. Embed them into the MacIO devices. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-25ppc: Move Mac machines to hw/ppc/Andreas Färber1-3/+3
Signed-off-by: Andreas Färber <afaerber@suse.de> [agraf: squash in MAINTAINERS fix] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19block: move include files to include/block/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-26hw/ide/macio: Fix segfault caused by NULL DMAContext*Peter Maydell1-2/+4
Pass qemu_sglist_init the global dma_context_memory rather than a NULL pointer; this fixes a segfault in dma_memory_map() when the guest starts using DMA. Reported-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity1-6/+6
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05cleanup useless return sentenceAmos Kong1-1/+0
This patch cleans up return sentences in the end of void functions. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-06-27iommu: Make sglists and dma_bdrv helpers use new universal DMA helpersDavid Gibson1-2/+2
dma-helpers.c contains a number of helper functions for doing scatter/gather DMA, and various block device related DMA. Currently, these directly access guest memory using cpu_physical_memory_*(), assuming no IOMMU translation. This patch updates this code to use the new universal DMA helper functions. qemu_sglist_init() now takes a DMAContext * to describe the DMA address space in which the scatter/gather will take place. We minimally update the callers qemu_sglist_init() to pass NULL (i.e. no translation, same as current behaviour). Some of those callers should pass something else in some cases to allow proper IOMMU translation in future, but that will be fixed in later patches. Cc: Kevin Wolf <kwolf@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-05Use DMADirection type for dma_bdrv_ioDavid Gibson1-1/+2
Currently dma_bdrv_io() takes a 'to_dev' boolean parameter to determine the direction of DMA it is emulating. We already have a DMADirection enum designed specifically to encode DMA directions. This patch uses it for dma_bdrv_io() as well. This involves removing the DMADirection definition from the #ifdef it was inside, but since that only existed to protect the definition of dma_addr_t from places where config.h is not included, there wasn't any reason for it to be there in the first place. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-03-11Add missing const attributes for MemoryRegionOpsStefan Weil1-1/+1
Most MemoryRegionOps already had the const attribute. This patch adds it to the remaining ones. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-12-15block: dma_bdrv_* does not return NULLPaolo Bonzini1-3/+1
Initially attempted with the following semantic patch: @ rule1 @ expression E; statement S; @@ E = ( dma_bdrv_io | dma_bdrv_read | dma_bdrv_write ) (...); ( - if (E == NULL) { ... } | - if (E) { <... S ...> } ) which however did not match anything. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-15block: bdrv_aio_* do not return NULLPaolo Bonzini1-7/+0
Initially done with the following semantic patch: @ rule1 @ expression E; statement S; @@ E = ( bdrv_aio_readv | bdrv_aio_writev | bdrv_aio_flush | bdrv_aio_discard | bdrv_aio_ioctl ) (...); ( - if (E == NULL) { ... } | - if (E) { <... S ...> } ) which however missed the occurrence in block/blkverify.c (as it should have done), and left behind some unused variables. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05block: convert qemu_aio_flush() calls to bdrv_drain_all()Stefan Hajnoczi1-2/+3
Many places in QEMU call qemu_aio_flush() to complete all pending asynchronous I/O. Most of these places actually want to drain all block requests but there is no block layer API to do so. This patch introduces the bdrv_drain_all() API to wait for requests across all BlockDriverStates to complete. As a bonus we perform checks after qemu_aio_wait() to ensure that requests really have finished. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28atapi/scsi: unify definitions for MMCPaolo Bonzini1-1/+1
The definitions in ide/internal.h are duplicates, since ATAPI commands actually come from SCSI. Use the ones in scsi-defs.h and move the missing ones there. Two exceptions: - MODE_PAGE_WRITE_PARMS conflicts with the "flexible disk geometry" page in scsi-disk.c. It is unused, so pick the latter. - GPCMD_* is left in ide/internal.h, at least for now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-19dma-helpers: rename is_write to to_devPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12hw: Trim superfluous #include "block_int.h"Markus Armbruster1-1/+0
Including it in device models is unclean, including it without a reason adds insult to injury. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-25block: explicit I/O accountingChristoph Hellwig1-11/+29
Decouple the I/O accounting from bdrv_aio_readv/writev/flush and make the hardware models call directly into the accounting helpers. This means: - we do not count internal requests from image formats in addition to guest originating I/O - we do not double count I/O ops if the device model handles it chunk wise - we only account I/O once it actuall is done - can extent I/O accounting to synchronous or coroutine I/O easily - implement I/O latency tracking easily (see the next patch) I've conveted the existing device model callers to the new model, device models that are using synchronous I/O and weren't accounted before haven't been updated yet. Also scsi hasn't been converted to the end-to-end accounting as I want to defer that after the pending scsi layer overhaul. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-1/+1
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08ppc: convert to memory APIAvi Kivity1-17/+19
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-15ide: add TRIM supportChristoph Hellwig1-0/+4
Add support for TRIM sub function of the data set management command, and wire it up to the qemu discard infrastructure. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15ide: allow other dma comands than read and writeChristoph Hellwig1-2/+7
Replace the is_read flag with a dma_cmd flag to allow the dma and restart logic to handler other commands like TRIM. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-15Remove unused sysemu.h include directivesBlue Swirl1-1/+0
Remove unused sysemu.h include directives to speed up build with the following patches. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add endianness as io mem parameterAlexander Graf1-1/+2
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-06Merge remote branch 'kwolf/for-anthony' into stagingAnthony Liguori1-1/+1
2010-07-06savevm: Add DeviceState paramAlex Williamson1-1/+1
When available, we'd like to be able to access the DeviceState when registering a savevm. For buses with a get_dev_path() function, this will allow us to create more unique savevm id strings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06ide: Replace IDEState members is_cdrom, is_cf by drive_kindMarkus Armbruster1-1/+1
The two aren't independent variables. Make that obvious. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04ide: Split non-qdev code off ide_init2()Markus Armbruster1-1/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-03-29Compile ide/macio only onceBlue Swirl1-10/+4
Replace TARGET_PAGE_SIZE with 4096. Make byte swapping unconditional since PPC is big endian. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-11-07IDE: Fix reset handlingBlue Swirl1-2/+1
Problem: x86 systems could not survive a few system_resets. Clear most of IDE state when reset. Implement the missing reset handlers. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-11-07PPC: remove unneeded calls to device resetBlue Swirl1-1/+0
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-27ide: port pmac ide to vmstateJuan Quintela1-31/+11
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori1-6/+6
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc1-6/+6
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-04ide: move cmd+irq from IDEState to IDEBus.Gerd Hoffmann1-1/+1
These variables are per bus, not per drive. Lets move them and cleanup things a bit. And fix the cmd migration bug for real. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-05-12 04:56:10 +0000