summaryrefslogtreecommitdiff
path: root/hw/ide
AgeCommit message (Collapse)AuthorFilesLines
2011-10-04RunState: Rename enum values as generated by the QAPILuiz Capitulino1-1/+1
Next commit will convert the query-status command to use the RunState type as generated by the QAPI. In order to "transparently" replace the current enum by the QAPI one, we have to make some changes to some enum values. As the changes are simple renames, I'll do them in one shot. The changes are: - Rename the prefix from RSTATE_ to RUN_STATE_ - RUN_STATE_SAVEVM to RUN_STATE_SAVE_VM - RUN_STATE_IN_MIGRATE to RUN_STATE_INMIGRATE - RUN_STATE_PANICKED to RUN_STATE_INTERNAL_ERROR - RUN_STATE_POST_MIGRATE to RUN_STATE_POSTMIGRATE - RUN_STATE_PRE_LAUNCH to RUN_STATE_PRELAUNCH - RUN_STATE_PRE_MIGRATE to RUN_STATE_PREMIGRATE - RUN_STATE_RESTORE to RUN_STATE_RESTORE_VM - RUN_STATE_PRE_MIGRATE to RUN_STATE_FINISH_MIGRATE Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-09-21ahci: add port I/O index-data pairDaniel Verkamp3-3/+75
Implement an I/O space index-data register pair as defined by the AHCI spec, including the corresponding SATA PCI capability and BAR. This allows real-mode code to access the AHCI registers; real-mode code cannot address the memory-mapped register space because it is beyond the first megabyte. Signed-off-by: Daniel Verkamp <daniel@drv.nu> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-20Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori3-5/+7
2011-09-20AHCI Port Interrupt Enable register cleaning on soft resetAlexander Motin1-3/+5
I've found that FreeBSD AHCI driver doesn't work with AHCI hardware emulation of QEMU 0.15.0. I believe the problem is on QEMU's side. As I see, it clears port's Interrupt Enable register each time when reset of any level happens. Is is reasonable for the global controller reset. It is probably not good, but acceptable for FreeBSD driver for the port hard reset. But it is IMO wrong for the device soft reset. None of real hardware I know behaves that way. Signed-off-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-19dma-helpers: rename is_write to to_devPaolo Bonzini2-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-15Replace the VMSTOP macros with a proper state typeLuiz Capitulino4-5/+6
Today, when notifying a VM state change with vm_state_notify(), we pass a VMSTOP macro as the 'reason' argument. This is not ideal because the VMSTOP macros tell why qemu stopped and not exactly what the current VM state is. One example to demonstrate this problem is that vm_start() calls vm_state_notify() with reason=0, which turns out to be VMSTOP_USER. This commit fixes that by replacing the VMSTOP macros with a proper state type called RunState. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-09-12ahci: Remove unused struct memberStefan Weil2-3/+0
Member variable is_read is written, but never read (contrary to its name). Remove it. Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi scsi-disk: Make monitor eject -f, then change workMarkus Armbruster1-0/+1
change fails while the tray is locked by the guest. eject -f forces it open and removes any media. Unfortunately, the tray closes again instantly. Since the lock remains as it is, there is no way to insert another medium unless the guest voluntarily unlocks. Fix by leaving the tray open after monitor eject. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: New change_media_cb() parameter loadMarkus Armbruster1-1/+1
To let device models distinguish between eject and load. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: New bdrv_set_buffer_alignment()Markus Armbruster1-1/+1
Device models should be able to set it without an unclean include of block_int.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12hw: Trim superfluous #include "block_int.h"Markus Armbruster8-8/+0
Including it in device models is unclean, including it without a reason adds insult to injury. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Move BlockConf & friends from block_int.h to block.hMarkus Armbruster2-1/+1
It's convenience stuff for block device models, so block.h isn't the ideal home either, but better than block_int.h. Permits moving some #include "block_int.h" from device model .h into .c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Show whether the virtual tray is open in info blockMarkus Armbruster1-0/+6
Need to ask the device, so this requires new BlockDevOps member is_tray_open(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Drop BlockDriverState member removableMarkus Armbruster1-1/+0
It's a confused mess (see previous commit). No users remain. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Preserve tray state on migrationMarkus Armbruster1-0/+32
Use a subsection, so that migration to older version still works, provided the tray is closed and unlocked. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Don't fail eject when tray is already openMarkus Armbruster1-1/+1
MMC-5 6.40.2.6 specifies that START STOP UNIT succeeds when the drive already has the requested state. cmd_start_stop_unit() fails when asked to eject while the tray is open and locked. Fix that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Rename bdrv_set_locked() to bdrv_lock_medium()Markus Armbruster1-1/+1
While there, make the locked parameter bool. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Drop medium lock tracking, ask device models insteadMarkus Armbruster1-0/+6
Requires new BlockDevOps member is_medium_locked(). Implement for IDE and SCSI CD-ROMs. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Leave enforcing tray lock to device modelsMarkus Armbruster1-20/+9
The device model knows best when to accept the guest's eject command. No need to detour through the block layer. bdrv_eject() can't fail anymore. Make it void. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Track tray locked stateMarkus Armbruster2-1/+4
We already track it in BlockDriverState. Just like tray open/close state, we should track it in the device models instead, because it's device state. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Revert entanglement of bdrv_is_inserted() with tray statusMarkus Armbruster1-7/+8
Commit 4be9762a changed bdrv_is_inserted() to fail when the tray is open. Unfortunately, there are two different kinds of users, with conflicting needs. 1. Device models using bdrv_eject(), currently ide-cd and scsi-cd. They expect bdrv_is_inserted() to reflect the tray status. Commit 4be9762a makes them happy. 2. Code that wants to know whether a BlockDriverState has media, such as find_image_format(), bdrv_flush_all(). Commit 4be9762a makes them unhappy. In particular, it breaks flush on VM stop for media ejected by the guest. Revert the change to bdrv_is_inserted(). Check the tray status in the device models instead. Note on IDE: Since only ATAPI devices have a tray, and they don't accept ATA commands since the recent commit "ide: Reject ATA commands specific to drive kinds", checking in atapi.c suffices. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Track tray open/close stateMarkus Armbruster2-1/+6
We already track it in BlockDriverState since commit 4be9762a. As discussed in that commit's message, we should track it in the device device models instead, because it's device state. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Clean up misleading name in cmd_start_stop_unit()Markus Armbruster1-4/+4
"eject" is misleading; it means "eject" when start is clear, but "load" when start is set. Rename to loej, because that's how MMC-5 calls it, in section 6.40. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide: Reject ATA commands specific to drive kindsMarkus Armbruster1-25/+25
ACS-2 Table B.2 explicitly prohibits ATAPI devices from implementing WIN_RECAL, WIN_READ_EXT, WIN_READDMA_EXT, WIN_READ_NATIVE_MAX, WIN_MULTREAD_EXT, WIN_WRITE, WIN_WRITE_ONCE, WIN_WRITE_EXT, WIN_WRITEDMA_EXT, WIN_MULTWRITE_EXT, WIN_WRITE_VERIFY, WIN_VERIFY, WIN_VERIFY_ONCE, WIN_VERIFY_EXT, WIN_SPECIFY, WIN_MULTREAD, WIN_MULTWRITE, WIN_SETMULT, WIN_READDMA, WIN_READDMA_ONCE, WIN_WRITEDMA, WIN_WRITEDMA_ONCE, WIN_FLUSH_CACHE_EXT. Restrict them to IDE_HD and IDE_CFATA. Same for CFA_WRITE_SECT_WO_ERASE, CFA_WRITE_MULTI_WO_ERASE. Restrict them to IDE_CFATA, like the other CFA_ commands. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide: Use a table to declare which drive kinds accept each commandMarkus Armbruster1-25/+80
No functional change. It would be nice to have handler functions in the table, like commit e1a064f9 did for ATAPI. Left for another day. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide: Fix ATA command READ to set ATAPI signature for CD-ROMMarkus Armbruster1-1/+3
Must set the ATAPI device signature, see ATA4 8.27.5.2 Outputs for PACKET Command feature set devices, and ACS-2 7.36.6 Outputs for PACKET feature set devices. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06xen: Clean up pci_piix3_xen_ide_unplug()'s test for "not a CD"Markus Armbruster1-2/+1
pci_piix3_xen_ide_unplug() unplugs only disks, not CD-ROMs. It peeks into the DriveInfo's BlockDriverState to distinguish between the two. Unclean; use DriveInfo member media_cd, like xen_config_dev_blk(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06ide: Give vmstate structs internal linkage where possibleMarkus Armbruster1-3/+3
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06ide: Clean up case label indentation in ide_exec_cmd()Markus Armbruster1-6/+6
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06ide: Update command code definitions as per ACS-2 Table B.2Markus Armbruster2-83/+92
Drop WIN_SRST, it has the same value as WIN_DEVICE_RESET. Drop unused WIN_RESTORE, it has the same value as WIN_RECAL. Drop codes that are not implemented and long obsolete: WIN_READ_LONG, WIN_READ_LONG_ONCE, WIN_WRITE_LONG, WIN_WRITE_LONG_ONCE, WIN_FORMAT (all obsolete since ATA4), WIN_ACKMEDIACHANGE, WIN_POSTBOOT, WIN_PREBOOT (obsolete since ATA3), WIN_WRITE_SAME (obsolete since ATA3, code reused for something else in ACS2), WIN_IDENTIFY_DMA (obsolete since ATA4). Drop codes that are not implemented and vendor-specific: EXABYTE_ENABLE_NEST, DISABLE_SEAGATE. Drop WIN_INIT, it isn't implemented, its value used to be reserved, and is used for something else since ATA8. CFA_IDLEIMMEDIATE isn't specific to CFATA. ACS-2 shows it as a defined command in ATA-1, -2 and -3. Rename to WIN_IDLEIMMEDIATE2. Mark vendor specific, retired, and obsolete codes. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06block: Split change_cb() into change_media_cb(), resize_cb()Markus Armbruster1-6/+2
Multiplexing callbacks complicates matters needlessly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06block: Generalize change_cb() to BlockDevOpsMarkus Armbruster1-1/+5
So we can more easily add device model callbacks. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06block: Attach non-qdev devices as wellMarkus Armbruster2-2/+3
For now, this just protects against programming errors like having the same drive back multiple non-qdev devices, or untimely bdrv_delete(). Later commits will add other interesting uses. While there, rename BlockDriverState member peer to dev, bdrv_attach() to bdrv_attach_dev(), bdrv_detach() to bdrv_detach_dev(), and bdrv_get_attached() to bdrv_get_attached_dev(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-03Use new macro QEMU_PACKED for packed structuresStefan Weil2-5/+5
Most changes were made using these commands: git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/' git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/' git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/' git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/' git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/' Whitespace in linux-user/syscall_defs.h was fixed manually to avoid warnings from scripts/checkpatch.pl. Manual changes were also applied to hw/pc.c. I did not fix indentation with tabs in block/vvfat.c. The patch will show 4 errors with scripts/checkpatch.pl. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-25block: explicit I/O accountingChristoph Hellwig6-21/+86
Decouple the I/O accounting from bdrv_aio_readv/writev/flush and make the hardware models call directly into the accounting helpers. This means: - we do not count internal requests from image formats in addition to guest originating I/O - we do not double count I/O ops if the device model handles it chunk wise - we only account I/O once it actuall is done - can extent I/O accounting to synchronous or coroutine I/O easily - implement I/O latency tracking easily (see the next patch) I've conveted the existing device model callers to the new model, device models that are using synchronous I/O and weren't accounted before haven't been updated yet. Also scsi hasn't been converted to the end-to-end accounting as I want to defer that after the pending scsi layer overhaul. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori5-8/+8
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08pci: rename pci_register_bar_region() to pci_register_bar()Avi Kivity4-14/+8
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08ppc: convert to memory APIAvi Kivity1-17/+19
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08ahci: convert to memory APIAvi Kivity3-21/+15
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08ide: convert to memory APIAvi Kivity5-120/+261
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29Merge remote-tracking branch 'agraf/xen-next' into stagingAnthony Liguori1-0/+44
2011-07-29Merge remote-tracking branch 'kraxel/migration.2' into stagingAnthony Liguori1-0/+6
2011-07-26xen: implement unplug protocol in xen_platformStefano Stabellini1-0/+44
The unplug protocol is necessary to support PV drivers in the guest: the drivers expect to be able to "unplug" emulated disks and nics before initializing the Xen PV interfaces. It is responsibility of the guest to make sure that the unplug is done before the emulated devices or the PV interface start to be used. We use pci_for_each_device to walk the PCI bus, identify the devices and disks that we want to disable and dynamically unplug them. Changes in v2: - use PCI_CLASS constants; - replace pci_unplug_device with qdev_unplug; - do not import hw/ide/internal.h in xen_platform.c; Changes in v3: - introduce piix3-ide-xen, that support hot-unplug; - move the unplug code to hw/ide/piix.c; - just call qdev_unplug from xen_platform.c to unplug the IDE disks; Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-23ide: Turn properties any IDE device must have into bus propertiesMarkus Armbruster1-1/+4
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-20ahci doesn't support migrationGerd Hoffmann1-0/+6
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05ide: Initialise buffers with zerosKevin Wolf1-1/+5
Just in case there's still a way how a guest can read out buffers when it's not supposed to, let's zero the buffers during initialisation so that we don't leak information to the guest. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2011-07-05ide: Ignore reads during PIO in and writes during PIO outKevin Wolf1-8/+36
This fixes https://bugs.launchpad.net/qemu/+bug/786209: When the DRQ_STAT bit is set, the IDE core permits both data reads and data writes, regardless of whether the current transfer was initiated as a read or write. This potentially leaks uninitialized host memory into the guest, if, before doing anything else to an IDE device, the guest begins a write transaction (e.g. WIN_WRITE), but then *reads* from the IO port instead of writing to it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2011-06-22Merge remote-tracking branch 'mst/for_anthony' into stagingAnthony Liguori4-38/+23
Conflicts: hw/usb-uhci.c
2011-06-15Merge remote-tracking branch 'origin/master' into pciMichael S. Tsirkin6-39/+110
Conflicts: hw/virtio-pci.c
2011-06-15ide: Clear error_status after restarting flushKevin Wolf1-7/+11
Clearing the error status flag was missing for restarting flushes. Now that the error status is separate from the BM status register, we can simply set it to 0 after restarting the request. This ensures that we never forget to clear a bit. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-29 18:07:04 +0000