summaryrefslogtreecommitdiff
path: root/hw/mcf_fec.c
AgeCommit message (Collapse)AuthorFilesLines
2013-04-08hw: move NICs to hw/net/, configure via default-configs/Paolo Bonzini1-480/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move headers to include/Paolo Bonzini1-1/+1
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: include hw header files with full pathsPaolo Bonzini1-2/+2
Done with this script: cd hw for i in `find . -name '*.h' | sed 's/^..//'`; do echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,' done | sed -i -f - `find . -type f` This is so that paths remain valid as files are moved. Instead, files in hw/dataplane are referenced with the relative path. We know they are not going to move to include/, and they are the only include files that are in subdirectories _and_ move. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-01net: multiqueue supportJason Wang1-1/+1
This patch adds basic multiqueue support for qemu. The idea is simple, an array of NetClientStates were introduced in NICState, parse_netdev() were extended to find and match all NetClientStates belongs to the backend and place their pointers in NICConf. Then qemu_new_nic can setup a N:N mapping between NICStates that belongs to a nic and NICStates belongs to the netdev. And a queue_index were introduced in NetClientState to track its index. After this, each peers of a NICState were abstracted as a queue. After this change, all NetClientState that belongs to the same backend/nic has the same id. When use want to change the link status, all NetClientStates that belongs to the same backend/nic will be also changed. When user want to delete a device or netdev, all NetClientStates that belongs to the same backend/nic will be deleted also. Changing or deleting an specific queue is not allowed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: introduce qemu_get_nic()Jason Wang1-3/+3
To support multiqueue, this patch introduces a helper qemu_get_nic() to get NICState from a NetClientState. The following patches would refactor this helper to support multiqueue. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: introduce qemu_get_queue()Jason Wang1-2/+2
To support multiqueue, the patch introduce a helper qemu_get_queue() which is used to get the NetClientState of a device. The following patches would refactor this helper to support multiqueue. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19exec: move include files to include/exec/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19net: reorganize headersPaolo Bonzini1-1/+1
Move public headers to include/net, and leave private headers in net/. Put the virtio headers in include/net/tap.h, removing the multiple copies that existed. Leave include/net/tap.h as the interface for NICs, and net/tap_int.h as the interface for OS-specific parts of the tap backend. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity1-3/+3
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-01net: Rename VLANClientState to NetClientStateStefan Hajnoczi1-3/+3
The vlan feature is no longer part of net core. Rename VLANClientState to NetClientState because net clients are not explicitly associated with a vlan at all, instead they have a peer net client to which they are connected. This patch is a mechanical search-and-replace except for a few whitespace fixups where changing VLANClientState to NetClientState misaligned whitespace. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-08-01net: Remove VLANStateStefan Hajnoczi1-1/+0
VLANState is no longer used and can be removed. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-07-23hw, net: "net_client_type" -> "NetClientOptionsKind" (qapi-generated)Laszlo Ersek1-1/+1
NET_CLIENT_TYPE_ -> NET_CLIENT_OPTIONS_KIND_ Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-28mcf_fec: convert to memory APIBenoît Canet1-19/+19
Signed-off-by: Benoît Canet <benoit.canet@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-2/+2
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23Correct spelling of licensedMatthew Fernandez1-1/+1
Correct typos of "licenced" to "licensed". Reviewed-by: Stefan Weil <weil@mail.berlios.de> Reviewed-by: Andreas F=E4rber <andreas.faerber@web.de> Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23net: Consistently use qemu_macaddr_default_if_unsetJan Kiszka1-1/+1
Drop the open-coded MAC assignment from net_init_nic and replace it with standard qemu_macaddr_default_if_unset which is also used by qdev. That avoid creating colliding MACs when instantiating NICs via different mechanisms. This change requires to store the MAC as MACAddr in NICInfo, and the remaining nd_table users need to be updated. Based on suggestion by Peter Maydell. CC: Markus Armbruster <armbru@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-12-11Add endianness as io mem parameterAlexander Graf1-1/+2
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-03net: convert mcf_fec to NICStateMark McLoughlin1-25/+33
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: remove NICInfo::vcMark McLoughlin1-5/+5
Since 1cc33683, this field is not set for most devices, so just remove it and its remaining few uses. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27net: add receive_raw parameter to qemu_new_vlan_client()Mark McLoughlin1-1/+1
Trivial patch to allow supplying a receive_raw function. A future cleanup should combine this function pointer parameters into a table. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27net: add a client type codeMark McLoughlin1-1/+2
This is so as to allow APIs which operate on specific client types without having to add a function table entry which is only implemented by a single client type. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15net: allow NICs to be connected to netdevsMark McLoughlin1-1/+2
Introduce a 'peer' member to VLANClientState as an alternative to a vlan. The idea being that packets are transfered directly from peer clients rather than going through a vlan. Patchworks-ID: 35516 Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori1-3/+3
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc1-3/+3
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl1-2/+2
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-09Don't leak VLANClientState on PCI hot removeMark McLoughlin1-3/+3
destroy_nic() requires that NICInfo::private by a PCIDevice pointer, but then goes on to require that the same pointer matches VLANClientState::opaque. That is no longer the case for virtio-net since qdev and wasn't previously the case for rtl8139, ne2k_pci or eepro100. Make the situation a lot more clear by maintaining a VLANClientState pointer in NICInfo. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity1-1/+1
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-09net: add return value to packet receive handlerMark McLoughlin1-1/+2
This allows us to handle queue full conditions rather than dropping the packet on the floor. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: pass VLANClientState* as first arg to receive handlersMark McLoughlin1-4/+4
Give static type checking a chance to catch errors. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: re-name vc->fd_read() to vc->receive()Mark McLoughlin1-1/+1
VLANClientState's fd_read() handler doesn't read from file descriptors, it adds a buffer to the client's receive queue. Re-name the handlers to make things a little less confusing. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: add fd_readv() handler to qemu_new_vlan_client() argsMark McLoughlin1-1/+1
This, apparently, is the style we prefer - all VLANClientState should be an argument to qemu_new_vlan_client(). Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-05-13Replace gcc variadic macro extension with C99 versionBlue Swirl1-3/+3
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-05-08Replace cpu_abort with hw_errorPaul Brook1-4/+2
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-17Introduce VLANClientState::cleanup() (Mark McLoughlin)aliguori1-5/+15
We're currently leaking memory and file descriptors on device hot-unplug. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7150 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13Check NIC model in some NIC init functions (Mark McLoughlin)aliguori1-0/+2
Some NIC init functions are only called when that model is the only valid model. In that case, it makes sense to use qemu_check_nic_model() from the NIC init function itself. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6286 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Fix build breakage introduced by r6219aliguori1-1/+1
This was spotted by Stefan Weil. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6224 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add a -net name=foo parameter (Mark McLoughlin)aliguori1-1/+1
Allow the user to supply a vlan client name on the command line. This is probably only useful for management tools so that they can use their own names rather than parsing the output of 'info network'. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6220 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07add missing MAC address to info_str for some NICs (Mark McLoughlin)aliguori1-0/+1
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6219 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add a model string to VLANClientState (Mark McLoughlin)aliguori1-2/+2
Don't lose track of what type/model a vlan client is so that we can e.g. assign a global per-model id to clients. The entire patch is basically a tedious excercise in making sure the type/model string gets propagated down to qemu_new_vlan_client(). Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6216 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-18Add statics and missing #includes for prototypes.pbrook1-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3683 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook1-1/+3
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16find -type f | xargs sed -i 's/[\t ]$//g' # on most filesths1-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-06-07Fix return type.pbrook1-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2960 c046a42c-6fe2-441c-8c8c-71466251a162
2007-06-04ColdFire Ethernet support.pbrook1-0/+456
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2942 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-01 05:38:37 +0000