summaryrefslogtreecommitdiff
path: root/hw/nand.c
AgeCommit message (Collapse)AuthorFilesLines
2013-03-10Merge remote-tracking branch 'bonzini/hw-dirs' into stagingAnthony Liguori1-3/+3
* bonzini/hw-dirs: sh: move files referencing CPU to hw/sh4/ ppc: move more files to hw/ppc ppc: move files referencing CPU to hw/ppc/ m68k: move files referencing CPU to hw/m68k/ i386: move files referencing CPU to hw/i386/ arm: move files referencing CPU to hw/arm/ hw: move boards and other isolated files to hw/ARCH ppc: express FDT dependency of pSeries and e500 boards via default-configs/ build: always link device_tree.o into emulators if libfdt available hw: include hw header files with full paths ppc: do not use ../ in include files vt82c686: vt82c686 is not a PCI host bridge virtio-9p: remove PCI dependencies from hw/9pfs/ virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX hw: move device-hotplug.o to toplevel, compile it once hw: move qdev-monitor.o to toplevel directory hw: move fifo.[ch] to libqemuutil hw: move char backends to backends/ Conflicts: backends/baum.c backends/msmouse.c hw/a15mpcore.c hw/arm/Makefile.objs hw/arm/pic_cpu.c hw/dataplane/event-poll.c hw/dataplane/virtio-blk.c include/char/baum.h include/char/msmouse.h qemu-char.c vl.c Resolve conflicts caused by header movements. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-07hw/nand.c: correct the sense of the BUSY/READY status bitKuo-Jung Su1-1/+2
The BIT6 of Status Register(SR): SR[6] behaves the same as R/B# pin SR[6] = 0 indicates the device is busy; SR[6] = 1 means the device is ready Some NAND flash controller (i.e. ftnandc021) relies on the SR[6] to determine if the NAND flash erase/program is success or error timeout. P.S: The exmaple NAND flash datasheet could be found at following link: http://www.mxic.com.tw/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/8FEA549237D2F7674825795800104C26/$File/MX30LF1G08AA,%203V,%201Gb,%20v1.1.pdf Signed-off-by: Kuo-Jung Su <dantesu@gmail.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-03-01hw: include hw header files with full pathsPaolo Bonzini1-3/+3
Done with this script: cd hw for i in `find . -name '*.h' | sed 's/^..//'`; do echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,' done | sed -i -f - `find . -type f` This is so that paths remain valid as files are moved. Instead, files in hw/dataplane are referenced with the relative path. We know they are not going to move to include/, and they are the only include files that are in subdirectories _and_ move. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-21sysbus: Drop sysbus_from_qdev() cast macroAndreas Färber1-1/+1
Replace by SYS_BUS_DEVICE() QOM cast macro using a scripted conversion. Avoids the old macro creeping into new code. Resolve a Coding Style warning in openpic code. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-10Make all static TypeInfos constAndreas Färber1-1/+1
Since 39bffca2030950ef6efe57c2fac8327a45ae1015 (qdev: register all types natively through QEMU Object Model), TypeInfo as used in the common, non-iterative pattern is no longer amended with information and should therefore be const. Fix the documented QOM examples: sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h Since frequently the wrong examples are being copied by contributors of new devices, fix all types in the tree: sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c This also avoids to piggy-back these changes onto real functional changes or other refactorings. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-05hw: Fix return value check for bdrv_read, bdrv_writeStefan Weil1-12/+22
Those functions return -errno in case of an error. The old code would typically only detect EPERM (1) errors. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-02-15qom: Unify type registrationAndreas Färber1-2/+2
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qdev: register all types natively through QEMU Object ModelAnthony Liguori1-8/+10
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27sysbus: apic: ioapic: convert to QEMU Object ModelAnthony Liguori1-12/+21
This converts three devices because apic and ioapic are subclasses of sysbus. Converting subclasses independently of their base class is prohibitively hard. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-13prepare for future GPLv2+ relicensingPaolo Bonzini1-0/+3
All files under GPLv2 will get GPLv2+ changes starting tomorrow. event_notifier.c and exec-obsolete.h were only ever touched by Red Hat employees and can be relicensed now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-14hw/nand: reject read-only drivesJuha Riihimäki1-8/+14
also gracefully fail on nand_device_init() for unsupported block size instead of aborting. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-1/+1
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-30hw/nand: qdevifyJuha Riihimäki1-70/+94
Qdevify the NAND device. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: Writing to NAND can only clear bitsPeter Maydell1-4/+13
Writing to a NAND device cannot set bits, it can only clear them; implement this rather than simply copying the data. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: Support multiple reads following READ STATUSJuha Riihimäki1-3/+8
After receiving READ STATUS command all subsequent IO reads should return the status register value until another command is issued. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: Support devices wider than 8 bitsJuha Riihimäki1-32/+85
Support NAND devices which are wider than 8 bits. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30nand: Bump vmstate version after changing structure.Andrzej Zaborowski1-3/+3
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: Support large NAND devicesJuha Riihimäki1-21/+27
Add support for NAND devices of over 1Gb. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30hw/nand: Pass block device state to init functionPeter Maydell1-6/+2
Pass the BlockDeviceState to the nand_init() function rather than having it look it up via drive_get() itself. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-04-22vmstate: port nandJuan Quintela1-34/+39
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-04-22nand: pin values are uint8_tJuan Quintela1-3/+3
Signed-off-by: Juan Quintela <quintela@redhat.com>
2010-07-06savevm: Add DeviceState paramAlex Williamson1-1/+1
When available, we'd like to be able to access the DeviceState when registering a savevm. For buses with a get_dev_path() function, this will allow us to create more unique savevm id strings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-04blockdev: Collect block device code in new blockdev.cMarkus Armbruster1-2/+1
Anything that moves hundreds of lines out of vl.c can't be all bad. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-01-15nand: Correct random data reads.Edgar E. Iglesias1-7/+13
Random reading depends on having the last row/page latched and not beeing clobbered between read and any following random reads. Also, s->iolen must be updated when loading the io/data register with randomly accessed flash data. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-12-02Fix qemu_free use in nand.cJean-Christophe DUBOIS1-2/+2
nand.c is using free() instead of qemu_free(). Fix it. Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27kill drives_tableGerd Hoffmann1-4/+4
First step cleaning up the drives handling. This one does nothing but removing drives_table[], still it became seriously big. drive_get_index() is gone and is replaced by drives_get() which hands out DriveInfo pointers instead of a table index. This needs adaption in *tons* of places all over. The drives are now maintained as linked list. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-10Follow coding conventionsPaul Brook1-21/+21
Remove explicit struct qualifiers and rename structure types. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-08Replace cpu_abort with hw_errorPaul Brook1-4/+2
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-01-20Fix NAND flash save/restore.pbrook1-0/+3
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6370 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-26Fix undeclared symbol warnings from sparseblueswir11-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5539 c046a42c-6fe2-441c-8c8c-71466251a162
2008-07-01Remove duplicate device index calculations.pbrook1-3/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4818 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-02Make -mtdblock optional again.balrog1-6/+3
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4639 c046a42c-6fe2-441c-8c8c-71466251a162
2007-12-02Add -drive parameter, by Laurent Vivier.ths1-1/+7
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3759 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook1-1/+5
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16find -type f | xargs sed -i 's/[\t ]$//g' # on most filesths1-2/+2
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-05-24Savevm/loadvm bits for ARM core, the PXA2xx peripherals and Spitz hardware.balrog1-0/+47
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2857 c046a42c-6fe2-441c-8c8c-71466251a162
2007-05-12Correct NAND erase block size. Misc fixes in Spitz code.balrog1-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2806 c046a42c-6fe2-441c-8c8c-71466251a162
2007-04-30NAND Flash memory emulation and ECC calculation helpers for use by NAND ↵balrog1-0/+603
controllers. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2753 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-26 13:47:09 +0000