summaryrefslogtreecommitdiff
path: root/hw/pci-host
AgeCommit message (Collapse)AuthorFilesLines
2017-09-04apb: add busA qdev property to PBM PCI bridgeMark Cave-Ayland1-7/+37
As future sun4u PCI topologies place the ebus containing the in-built devices behind a PCI bridge, add a busA property to the PBM PCI bridge that is then used to allow IO accesses by default. This allows early fw_cfg/NVRAM/serial access to occur even before OpenBIOS has had a chance to configure the PCI bridges. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2017-09-04apb: fix endianness for APB and PCI config accessesMark Cave-Ayland1-4/+2
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2017-09-04apb: fix up PCI bus nomenclatureMark Cave-Ayland1-7/+5
Rather than referring to the PCI busses as bus2 and bus3, refer to them as busA and busB as per the documentation. Also replace the long bus names with the shorter pciA and pciB aliases (to make it easier to attach additional devices to either from the command line). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2017-08-31q35: use DIV_ROUND_UPMarc-André Lureau1-1/+1
I used the clang-tidy qemu-round check to generate the fix: https://github.com/elmarco/clang-tools-extra Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-08-31piix: use DIV_ROUND_UPMarc-André Lureau1-1/+1
I used the clang-tidy qemu-round check to generate the fix: https://github.com/elmarco/clang-tools-extra Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-07-14memory: Rename memory_region_init_ram() to memory_region_init_ram_nomigrate()Peter Maydell2-2/+2
Rename memory_region_init_ram() to memory_region_init_ram_nomigrate(). This leaves the way clear for us to provide a memory_region_init_ram() which does handle migration. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1499438577-7674-4-git-send-email-peter.maydell@linaro.org
2017-07-14Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-8/+21
* gdbstub fixes (Alex) * IOMMU MemoryRegion subclass (Alexey) * Chardev hotswap (Anton) * NBD_OPT_GO support (Eric) * Misc bugfixes * DEFINE_PROP_LINK (minus the ARM patches - Fam) * MAINTAINERS updates (Philippe) # gpg: Signature made Fri 14 Jul 2017 11:06:27 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (55 commits) spapr_rng: Convert to DEFINE_PROP_LINK cpu: Convert to DEFINE_PROP_LINK mips_cmgcr: Convert to DEFINE_PROP_LINK ivshmem: Convert to DEFINE_PROP_LINK dimm: Convert to DEFINE_PROP_LINK virtio-crypto: Convert to DEFINE_PROP_LINK virtio-rng: Convert to DEFINE_PROP_LINK virtio-scsi: Convert to DEFINE_PROP_LINK virtio-blk: Convert to DEFINE_PROP_LINK qdev: Add const qualifier to PropertyInfo definitions qmp: Use ObjectProperty.type if present qdev: Introduce DEFINE_PROP_LINK qdev: Introduce PropertyInfo.create qom: enforce readonly nature of link's check callback translate-all: remove redundant !tcg_enabled check in dump_exec_info vl: fix breakage of -tb-size nbd: Implement NBD_INFO_BLOCK_SIZE on client nbd: Implement NBD_INFO_BLOCK_SIZE on server nbd: Implement NBD_OPT_GO on client nbd: Implement NBD_OPT_GO on server ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14memory/iommu: introduce IOMMUMemoryRegionClassAlexey Kardashevskiy1-5/+18
This finishes QOM'fication of IOMMUMemoryRegion by introducing a IOMMUMemoryRegionClass. This also provides a fastpath analog for IOMMU_MEMORY_REGION_GET_CLASS(). This makes IOMMUMemoryRegion an abstract class. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170711035620.4232-3-aik@ozlabs.ru> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14memory/iommu: QOM'fy IOMMU MemoryRegionAlexey Kardashevskiy1-3/+3
This defines new QOM object - IOMMUMemoryRegion - with MemoryRegion as a parent. This moves IOMMU-related fields from MR to IOMMU MR. However to avoid dymanic QOM casting in fast path (address_space_translate, etc), this adds an @is_iommu boolean flag to MR and provides new helper to do simple cast to IOMMU MR - memory_region_get_iommu. The flag is set in the instance init callback. This defines memory_region_is_iommu as memory_region_get_iommu()!=NULL. This switches MemoryRegion to IOMMUMemoryRegion in most places except the ones where MemoryRegion may be an alias. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20170711035620.4232-2-aik@ozlabs.ru> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-13Convert error_report() to warn_report()Alistair Francis1-1/+1
Convert all uses of error_report("warning:"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these two commands: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. The test-qdev-global-props test case was manually updated to ensure that this patch passes make check (as the test cases are case sensitive). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Suggested-by: Thomas Huth <thuth@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Lieven <pl@kamp.de> Cc: Josh Durgin <jdurgin@redhat.com> Cc: "Richard W.M. Jones" <rjones@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Rob Herring <robh@kernel.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Peter Chubb <peter.chubb@nicta.com.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Max Reitz <mreitz@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-22Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' ↵Peter Maydell4-14/+13
into staging QAPI patches for 2017-06-09 # gpg: Signature made Tue 20 Jun 2017 13:31:39 BST # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits) tests/qdict: check more get_try_int() cases console: use get_uint() for "head" property i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties numa: use get_uint() for "size" property pnv-core: use get_uint() for "core-pir" property pvpanic: use get_uint() for "ioport" property auxbus: use get_uint() for "addr" property arm: use get_uint() for "mp-affinity" property xen: use get_uint() for "max-ram-below-4g" property pc: use get_uint() for "hpet-intcap" property pc: use get_uint() for "apic-id" property pc: use get_uint() for "iobase" property acpi: use get_uint() for "pci-hole*" properties acpi: use get_uint() for various acpi properties acpi: use get_uint() for "acpi-pcihp-io*" properties platform-bus: use get_uint() for "addr" property bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base" aspeed: use {set, get}_uint() for "ram-size" property pcihp: use get_uint() for "bsel" property pc-dimm: make "size" property uint64 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-20qdev: Use appropriate getter/setters typeMarc-André Lureau3-3/+3
Based on the underlying type of the data accessed, use the appropriate getters/setters: * AcpiPmInfo members s3_disabled, s4_disabled are bool, member s4_val is an uint8_t * Property ACPI_PCIHP_IO_PROP is defined with object_property_add_uint32_ptr() * Property PCIE_HOST_MCFG_SIZE is implemented with visit_type_uint64() * PCIDevice property "addr" is backed by PCIDevice member devfn, which is an int32_t Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-20-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [More verbose commit message] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20object: use more specific property type namesMarc-André Lureau2-9/+9
Use the actual unsigned integer type name. The type name change impacts the following externally visible area: * vl.c's machine_help_func() puts it in help for -machine NAME,help. * QMP command qom-list exposes it in ObjectPropertyInfo member @type. * QMP command device-list-properties exposes it in DevicePropertyInfo member @type. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170607163635.17635-15-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20q35: fix get_mmcfg_size to use uint64 visitorMarc-André Lureau1-2/+1
e->size is hwaddr, i.e. uint64_t. We silently truncate. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170607163635.17635-14-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-16q35/mch: implement extended TSEG sizesLaszlo Ersek1-3/+38
The q35 machine type currently lets the guest firmware select a 1MB, 2MB or 8MB TSEG (basically, SMRAM) size. In edk2/OVMF, we use 8MB, but even that is not enough when a lot of VCPUs (more than approx. 224) are configured -- SMRAM footprint scales largely proportionally with VCPU count. Introduce a new property for "mch" called "extended-tseg-mbytes", which expresses (in megabytes) the user's choice of TSEG (SMRAM) size. Invent a new, QEMU-specific register in the config space of the DRAM Controller, at offset 0x50, in order to allow guest firmware to query the TSEG (SMRAM) size. According to Intel Document Number 316966-002, Table 5-1 "DRAM Controller Register Address Map (D0:F0)": Warning: Address locations that are not listed are considered Intel Reserved registers locations. Reads to Reserved registers may return non-zero values. Writes to reserved locations may cause system failures. All registers that are defined in the PCI 2.3 specification, but are not necessary or implemented in this component are simply not included in this document. The reserved/unimplemented space in the PCI configuration header space is not documented as such in this summary. Offsets 0x50 and 0x51 are not listed in Table 5-1. They are also not part of the standard PCI config space header. And they precede the capability list as well, which starts at 0xe0 for this device. When the guest writes value 0xffff to this register, the value that can be read back is that of "mch.extended-tseg-mbytes" -- unless it remains 0xffff. The guest is required to write 0xffff first (as opposed to a read-only register) because PCI config space is generally not cleared on QEMU reset, and after S3 resume or reboot, new guest firmware running on old QEMU could read a guest OS-injected value from this register. After reading the available "extended" TSEG size, the guest firmware may actually request that TSEG size by writing pattern 11b to the ESMRAMC register's TSEG_SZ bit-field. (The Intel spec referenced above defines only patterns 00b (1MB), 01b (2MB) and 10b (8MB); 11b is reserved.) On the QEMU command line, the value can be set with -global mch.extended-tseg-mbytes=N The default value for 2.10+ q35 machine types is 16. The value is limited to 0xfff (4095) at the moment, purely so that the product (4095 MB) can be stored to the uint32_t variable "tseg_size" in mch_update_smram(). Users are responsible for choosing sensible TSEG sizes. On 2.9 and earlier q35 machine types, the default value is 0. This lets the 11b bit pattern in ESMRAMC.TSEG_SZ, and the register at offset 0x50, keep their original behavior. When "extended-tseg-mbytes" is nonzero, the new register at offset 0x50 is set to that value on reset, for completeness. PCI config space is migrated automatically, so no VMSD changes are necessary. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1447027 Ref: https://lists.01.org/pipermail/edk2-devel/2017-May/010456.html Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-30Merge remote-tracking branch 'mst/tags/for_upstream' into stagingStefan Hajnoczi1-1/+1
pci, virtio, vhost: fixes A bunch of fixes all over the place. Most notably this fixes the new MTU feature when using vhost. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 29 May 2017 01:10:24 AM BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * mst/tags/for_upstream: acpi-test: update expected files pc: ACPI BIOS: use highest NUMA node for hotplug mem hole SRAT entry vhost-user: pass message as a pointer to process_message_reply() virtio_net: Bypass backends for MTU feature negotiation intel_iommu: turn off pt before 2.9 intel_iommu: support passthrough (PT) intel_iommu: allow dev-iotlb context entry conditionally intel_iommu: use IOMMU_ACCESS_FLAG() intel_iommu: provide vtd_ce_get_type() intel_iommu: renaming context entry helpers x86-iommu: use DeviceClass properties memory: remove the last param in memory_region_iommu_replay() memory: tune last param of iommu_ops.translate() Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-25memory: tune last param of iommu_ops.translate()Peter Xu1-1/+1
This patch converts the old "is_write" bool into IOMMUAccessFlags. The difference is that "is_write" can only express either read/write, but sometimes what we really want is "none" here (neither read nor write). Replay is an good example - during replay, we should not check any RW permission bits since thats not an actual IO at all. CC: Paolo Bonzini <pbonzini@redhat.com> CC: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2017-05-23shutdown: Add source information to SHUTDOWN and RESETEric Blake3-4/+4
Time to wire up all the call sites that request a shutdown or reset to use the enum added in the previous patch. It would have been less churn to keep the common case with no arguments as meaning guest-triggered, and only modified the host-triggered code paths, via a wrapper function, but then we'd still have to audit that I didn't miss any host-triggered spots; changing the signature forces us to double-check that I correctly categorized all callers. Since command line options can change whether a guest reset request causes an actual reset vs. a shutdown, it's easy to also add the information to reset requests. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts] Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part] Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts] Message-Id: <20170515214114.15442-5-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-17qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatableEduardo Habkost11-17/+17
cannot_instantiate_with_device_add_yet was introduced by commit efec3dd631d94160288392721a5f9c39e50fb2bc to replace no_user. It was supposed to be a temporary measure. When it was introduced, we had 54 cannot_instantiate_with_device_add_yet=true lines in the code. Today (3 years later) this number has not shrunk: we now have 57 cannot_instantiate_with_device_add_yet=true lines. I think it is safe to say it is not a temporary measure, and we won't see the flag go away soon. Instead of a long field name that misleads people to believe it is temporary, replace it a shorter and less misleading field: user_creatable. Except for code comments, changes were generated using the following Coccinelle patch: @@ expression DC; @@ ( -DC->cannot_instantiate_with_device_add_yet = false; +DC->user_creatable = true; | -DC->cannot_instantiate_with_device_add_yet = true; +DC->user_creatable = false; ) @@ typedef ObjectClass; expression dc; identifier class, data; @@ static void device_class_init(ObjectClass *class, void *data) { ... dc->hotpluggable = true; +dc->user_creatable = true; ... } @@ @@ struct DeviceClass { ... -bool cannot_instantiate_with_device_add_yet; +bool user_creatable; ... } @@ expression DC; @@ ( -!DC->cannot_instantiate_with_device_add_yet +DC->user_creatable | -DC->cannot_instantiate_with_device_add_yet +!DC->user_creatable ) Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Thomas Huth <thuth@redhat.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-2-ehabkost@redhat.com> [ehabkost: kept "TODO remove once we're there" comment] Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-03hw/i386: Build-time assertion on pc/q35 reset register being identical.Phil Dennis-Jordan1-6/+0
This adds a clarifying comment and build time assert to the FADT reset register field initialisation: the reset register is the same on both machine types. Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu> Message-Id: <1489558827-28971-3-git-send-email-phil@philjordan.eu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-04-21versatile: remove cannot_destroy_with_object_finalize_yetLaurent Vivier1-23/+12
cannot_destroy_with_object_finalize_yet was added by 4c315c2 ("qdev: Protect device-list-properties against broken devices") because "realview_pci" and "versatile_pci" were hanging during "device-list-properties" cleanup (an infinite loop in bus_unparent()). We have this problem because the child is not removed from the list of the PCI bus children because it has no defined parent: qdev_set_parent_bus() set the device parent_bus pointer to bus, and adds the device in the bus children list, but doesn't update the device parent pointer. To fix the problem, move all the involved parts to the realize function. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20170414083717.13641-4-lvivier@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-02-24Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170222' ↵Peter Maydell1-5/+6
into staging ppc patch queue for 2017-02-22 This pull request has: * Yet more POWER9 instruction implementations * Some extensions to the softfloat code which are necesssary for some of those instructions * Some preliminary patches in preparation for POWER9 softmmu implementation * Igor Mammedov's cleanups to unify hotplug cpu handling across architectures * Assorted bugfixes The softfloat and cpu hotplug changes aren't entirely ppc specific (in fact the hotplug stuff contains some pc specific patches). However they're included here because ppc is one of the main beneficiaries, and the series depend on some ppc specific patches. # gpg: Signature made Wed 22 Feb 2017 06:29:47 GMT # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.9-20170222: (43 commits) hw/ppc/ppc405_uc.c: Avoid integer overflows hw/ppc/spapr: Check for valid page size when hot plugging memory target-ppc: fix Book-E TLB matching hw/net/spapr_llan: 6 byte mac address device tree entry machine: replace query_hotpluggable_cpus() callback with has_hotpluggable_cpus flag machine: unify [pc_|spapr_]query_hotpluggable_cpus() callbacks spapr: reuse machine->possible_cpus instead of cores[] change CPUArchId.cpu type to Object* pc: pass apic_id to pc_find_cpu_slot() directly so lookup could be done without CPU object pc: calculate topology only once when possible_cpus is initialised pc: move pcms->possible_cpus init out of pc_cpus_init() machine: move possible_cpus to MachineState hw/pci-host/prep: Do not use hw_error() in realize function target/ppc/POWER9: Direct all instr and data storage interrupts to the hypv target/ppc/POWER9: Adapt LPCR handling for POWER9 target/ppc/POWER9: Add ISAv3.00 MMU definition target/ppc: Fix LPCR DPFD mask define target-ppc: Add xscvqpudz and xscvqpuwz instructions target-ppc: Implement round to odd variants of quad FP instructions softfloat: Add float128_to_uint32_round_to_zero() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-22hw/pci-host/prep: Do not use hw_error() in realize functionThomas Huth1-5/+6
hw_error() is for CPU related errors only (it prints out a register dump and calls abort()), so we should not use it if we just failed to load the bios image. Apart from that, realize() functions should not exit directly but always set the errp with error_setg() in case of errors instead. Additionally, move some code around and delete the bios memory subregion again in case of such an error, so that we leave a clean state when returning to the caller. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-21hw: xilinx-pcie: Add support for Xilinx AXI PCIe ControllerPaul Burton2-0/+329
Add support for emulating the Xilinx AXI Root Port Bridge for PCI Express as described by Xilinx' PG055 document. This is a PCIe controller that can be used with certain series of Xilinx FPGAs, and is used on the MIPS Boston board which will make use of this code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> [yongbok.kim@imgtec.com: removed returning on !level, updated IRQ connection with GPIO logic, moved xilinx_pcie_init() to boston.c replaced stw_le_p() with pci_set_word() and other cosmetic changes] Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
2016-11-23ppc: Make uninorth interrupt swizzling identical to GrackleBenjamin Herrenschmidt1-3/+1
It's currently broken as it uses an incorrect shift, it tries to use the slot number but uses the top bits of the bus number instead. Note: Neither implementation matches what OpenBIOS ends up putting in the device-tree either, which will have to be fixed separately. This is not quite correct for modelling a real Mac since Apple tend to tie all 4 interrupt lines of a slot together and have separate interrupts for every slot and every motherboard devices going straight to the PIC but we'll sort that out later. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-07-29apb: convert init to realizeWei Jiangang1-3/+2
Convert a device model where initialization obviously can't fail, make it implement realize() rather than init(). Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2016-07-20hw/versatile: realize the PCI root bus as part of the versatile initMarcel Apfelbaum1-0/+1
'Realize' the PCI root bus manually since the 'realize' mechanism does not propagate to child devices yet. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-07-20hw/prep: realize the PCI root bus as part of the prep initMarcel Apfelbaum1-0/+1
'Realize' the PCI root bus manually since the 'realize' mechanism does not propagate to child devices yet. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-07-20hw/grackle: fix PCI bus initializationMarcel Apfelbaum1-1/+1
Delay the host-bridge 'realization' until the PCI root bus is attached. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-07-20hw/apb: fix PCI bus initializationMarcel Apfelbaum1-8/+7
Create and connect the PCI root bus to the host bridge before the later is 'realized'. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-07-04range: Eliminate direct Range member accessMarkus Armbruster2-22/+45
Users of struct Range mess liberally with its members, which makes refactoring hard. Create a set of methods, and convert all users to call them instead of accessing members. The methods have carefully worded contracts, and use assertions to check them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04pc: Eliminate PcPciInfoMarkus Armbruster2-11/+11
PcPciInfo has two (ill-named) members: Range w32 is the PCI hole, and w64 is the PCI64 hole. Three users: * I440FXState and MCHPCIState have a member PcPciInfo pci_info, but only pci_info.w32 is actually used. This is confusing. Replace by Range pci_hole. * acpi_build() uses auto PcPciInfo pci_info to forward both PCI holes from acpi_get_pci_info() to build_dsdt(). Replace by two variables Range pci_hole, pci_hole64. Rename acpi_get_pci_info() to acpi_get_pci_holes(). PcPciInfo is now unused; drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-07-04piix: Set I440FXState member pci_info.w32 in one placeMarkus Armbruster1-3/+1
Range pci_info.w32 records the location of the PCI hole. It's initialized to empty when QOM zeroes I440FXState. That's a fine value for a still unknown PCI hole. i440fx_init() sets pci_info.w32.begin = below_4g_mem_size. Changes the PCI hole from empty to [below_4g_mem_size, UINT64_MAX]. That's a bogus value. i440fx_pcihost_initfn() sets pci_info.end = IO_APIC_DEFAULT_ADDRESS. Since i440fx_init() ran already, this changes the PCI hole to [below_4g_mem_size, IO_APIC_DEFAULT_ADDRESS-1]. That's the correct value. Setting the bounds of the PCI hole in two separate places is confusing, and begs the question whether the bogus intermediate value could be used by something, or what would happen if we somehow managed to realize an i440FX device without having run the board init function i440fx_init() first. Avoid the confusion by setting the (constant) upper bound along with the lower bound in i440fx_init(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-07-04machine: remove iommu propertyMarcel Apfelbaum1-12/+0
Since iommu devices can be created with '-device' there is no need to keep iommu as machine and mch property. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04hw/iommu: enable iommu with -deviceMarcel Apfelbaum1-16/+1
Use the standard '-device intel-iommu' to create the IOMMU device. The legacy '-machine,iommu=on' can still be used. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04q35: allow dynamic sysbusMarcel Apfelbaum2-0/+4
Allow adding sysbus devices with -device on Q35. At first Q35 will support only intel-iommu to be added this way, however the command line will support all sysbus devices. Mark with 'cannot_instantiate_with_device_add_yet' the ones causing immediate problems (e.g. crashes). Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-29Q35: implement property interfece to several parametersEfimov Vasily1-0/+20
During creation of Q35 instance several parameters are set using direct access. It violates Qemu device model. Correctly, the parameters should be handled as object properties. The patch adds four link type properties for fields: mch.ram_memory mch.pci_address_space mch.system_memory mch.address_space_io And, it adds two size type properties for fields: mch.below_4g_mem_size mch.above_4g_mem_size Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-20coccinelle: Remove unnecessary variables for function return valueEduardo Habkost1-4/+1
Use Coccinelle script to replace 'ret = E; return ret' with 'return E'. The script will do the substitution only when the function return type and variable type are the same. Manual fixups: * audio/audio.c: coding style of "read (...)" and "write (...)" * block/qcow2-cluster.c: wrap line to make it shorter * block/qcow2-refcount.c: change indentation of wrapped line * target-tricore/op_helper.c: fix coding style of "remainder|quotient" * target-mips/dsp_helper.c: reverted changes because I don't want to argue about checkpatch.pl * ui/qemu-pixman.c: fix line indentation * block/rbd.c: restore blank line between declarations and statements Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Unused Coccinelle rule name dropped along with a redundant comment; whitespace touched up in block/qcow2-cluster.c; stale commit message paragraph deleted] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-05-19hw: explicitly include qemu/log.hPaolo Bonzini2-0/+2
Move the inclusion out of hw/hw.h, most files do not need it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster3-0/+3
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-04loader: Add data swap option to load-elfPeter Crosthwaite1-1/+1
Some CPUs are of an opposite data-endianness to other components in the system. Sometimes elfs have the data sections layed out with this CPU data-endianness accounting for when loaded via the CPU, so byte swaps (relative to other system components) will occur. The leading example, is ARM's BE32 mode, which is is basically LE with address manipulation on half-word and byte accesses to access the hw/byte reversed address. This means that word data is invariant across LE and BE32. This also means that instructions are still LE. The expectation is that the elf will be loaded via the CPU in this endianness scheme, which means the data in the elf is reversed at compile time. As QEMU loads via the system memory directly, rather than the CPU, we need a mechanism to reverse elf data endianness to implement this possibility. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-19Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-6/+1
vhost, virtio, pci, pxe Fixes all over the place. New tests for pxe. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 18 Feb 2016 15:46:39 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: tests/vhost-user-bridge: add scattering of incoming packets vhost-user interrupt management fixes rules: filter out irrelevant files change type of pci_bridge_initfn() to void dec: convert to realize() tests: add pxe e1000 and virtio-pci tests msix: fix msix_vector_masked virtio: optimize virtio_access_is_big_endian() for little-endian targets vhost: simplify vhost_needs_vring_endian() vhost: move virtio 1.0 check to cross-endian helper virtio: move cross-endian helper to vhost vhost-net: revert support of cross-endian vnet headers virtio-net: use the backend cross-endian capabilities Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-17hw: fix some debug message format stringsAlyssa Milburn1-2/+2
Signed-off-by: Alyssa Milburn <fuzzie@fuzzie.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-16change type of pci_bridge_initfn() to voidCao jin1-6/+1
Since it can`t fail. Also modify the callers. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-02-08qom: Swap 'name' next to visitor in ObjectPropertyAccessorEric Blake2-12/+11
Similar to the previous patch, it's nice to have all functions in the tree that involve a visitor and a name for conversion to or from QAPI to consistently stick the 'name' parameter next to the Visitor parameter. Done by manually changing include/qom/object.h and qom/object.c, then running this Coccinelle script and touching up the fallout (Coccinelle insisted on adding some trailing whitespace). @ rule1 @ identifier fn; typedef Object, Visitor, Error; identifier obj, v, opaque, name, errp; @@ void fn - (Object *obj, Visitor *v, void *opaque, const char *name, + (Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { ... } @@ identifier rule1.fn; expression obj, v, opaque, name, errp; @@ fn(obj, v, - opaque, name, + name, opaque, errp) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake2-9/+9
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-30uninorth.c: add support for UniNorth kMacRISCPCIAddressSelect (0x48) registerProgrammingkid1-0/+9
Darwin/OS X use the undocumented kMacRISCPCIAddressSelect (0x48) to configure PCI memory space size for mac99 machines. Without this register, warnings similar to below are emitted to the console during boot: AppleMacRiscPCI: bad range 2(80000000:01000000) AppleMacRiscPCI: bad range 2(81000000:00001000) AppleMacRiscPCI: bad range 2(81080000:00080000) Based upon the algorithm in Darwin's AppleMacRiscPCI.cpp driver, set the kMacRISCPCIAddressSelect register so that Darwin considers the PCI memory space to be at 0x80000000 (size 0x10000000) which matches that currently used by QEMU and OpenBIOS. Signed-off-by: John Arbuckle <programmingkidx@gmail.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [commit message and comment revised as suggested by Mark Cave-Ayland] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-29pci: Clean up includesPeter Maydell4-1/+4
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-23-git-send-email-peter.maydell@linaro.org
2016-01-29arm: Clean up includesPeter Maydell1-0/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
2016-01-29x86: Clean up includesPeter Maydell3-0/+3
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-13 22:49:58 +0000