| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that spapr-pci-vfio-host-bridge is reduced to just a stub, there is
only one implementation of the finish_realize hook in sPAPRPHBClass. So,
we can fold that implementation into its (single) caller, and remove the
hook. That's the last thing left in sPAPRPHBClass, so that can go away as
well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
|
|
Now that the EEH code is independent of the special
spapr-vfio-pci-host-bridge device, we can allow it on all spapr PCI
host bridges instead. We do this by changing spapr_phb_eeh_available()
to be based on the vfio_eeh_as_ok() call instead of the host bridge class.
Because the value of vfio_eeh_as_ok() can change with devices being
hotplugged or unplugged, this can potentially lead to some strange edge
cases where the guest starts using EEH, then it starts failing because
of a change in status.
However, it's not really any worse than the current situation. Cases that
would have worked previously will still work (i.e. VFIO devices from at
most one VFIO IOMMU group per vPHB), it's just that it's no longer
necessary to use spapr-vfio-pci-host-bridge with the groupid pre-specified.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
|
|
The EEH operations in the spapr-vfio-pci-host-bridge no longer rely on the
special groupid field in sPAPRPHBVFIOState. So we can simplify, removing
the class specific callbacks with direct calls based on a simple
spapr_phb_eeh_enabled() helper. For now we implement that in terms of
a boolean in the class, but we'll continue to clean that up later.
On its own this is a rather strange way of doing things, but it's a useful
intermediate step to further cleanups.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
|
|
Since 3f1e147, QEMU has adopted a convention of supporting function
hotplug by deferring hotplug events until func 0 is hotplugged.
This is likely how management tools like libvirt would expose
such support going forward.
Since sPAPR guests rely on per-func events rather than
slot-based, our protocol has been to hotplug func 0 *first* to
avoid cases where devices appear within guests without func 0
present to avoid undefined behavior.
To remain compatible with new convention, defer hotplug in a
similar manner, but then generate events in 0-first order as we
did in the past. Once func 0 present, fail any attempts to plug
additional functions (as we do with PCIe).
For unplug, defer unplug operations in a similar manner, but
generate unplug events such that function 0 is removed last in guest.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Rename controller flag to make it clearer what it means.
Add some documentation as well.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Using the return value to report errors is error prone:
- xics_alloc() returns -1 on error but spapr_vio_busdev_realize() errors
on 0
- xics_alloc_block() returns the unclear value of ics->offset - 1 on error
but both rtas_ibm_change_msi() and spapr_phb_realize() error on 0
This patch adds an errp argument to xics_alloc() and xics_alloc_block() to
report errors. The return value of these functions is a valid IRQ number
if errp is NULL. It is undefined otherwise.
The corresponding error traces get promotted to error messages. Note that
the "can't allocate IRQ" error message in spapr_vio_busdev_realize() also
moves to xics_alloc(). Similar error message consolidation isn't really
applicable to xics_alloc_block() because callers have extra context (device
config address, MSI or MSIX).
This fixes the issues mentioned above.
Based on previous work from Brian W. Hart.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
This RTAS call is used to request new interrupts or to free all interrupts.
If the driver has already allocated interrupts and asks again for a non-null
number of irqs, then the rtas_ibm_change_msi() function will silently leak
the previous interrupts.
It happens because xics_free() is only called when the driver releases all
interrupts (!req_num case). Note that the previously allocated spapr_pci_msi
is not leaked because the GHashTable is created with destroy functions and
g_hash_table_insert() hence frees the old value.
This patch makes sure any previously allocated MSIs are released when a
new allocation succeeds.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The num local variable is initialized to zero and has no writer.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
|
|
The core VFIO infrastructure more or less allows VFIO devices to work
on any normal guest PCI host bridge (PHB) without extra logic.
However, the "spapr-pci-host-bridge" device (as opposed to the special
"spapr-pci-vfio-host-bridge" device) breaks this by using a partially
KVM accelerated implementation of the guest kernel IOMMU which won't
work with VFIO devices, without additional kernel support.
This patch allows VFIO devices to work on the spapr-pci-host-bridge,
by having it switch off KVM TCE acceleration when a VFIO device is
added to the PHB (either on startup, or by hotplug).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
|
|
At present the PCI host bridge (PHB) for the pseries machine type has a
fixed DMA window from 0..1GB (in PCI address space) which is mapped to real
memory via the PAPR paravirtualized IOMMU.
For better support of VFIO devices, we're going to want to allow for
different configurations of the DMA window.
Eventually we'll want to allow the guest itself to reconfigure the window
via the PAPR dynamic DMA window interface, but as a preliminary this patch
allows the user to reconfigure the window with new properties on the PHB
device.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
|
|
This reverts commit 7cb18007 ("sPAPR: Don't enable EEH on emulated
PCI devices") as rtas_ibm_set_eeh_option() isn't the right place
to check if there has the corresponding PCI device for the input
address, which can be PE address, not PCI device address.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Support hotplug identifier type RTAS_LOG_V6_HP_ID_DRC_COUNT that allows
hotplugging of DRCs by specifying the DRC count.
While we are here, rename
spapr_hotplug_req_add_event() to spapr_hotplug_req_add_by_index()
spapr_hotplug_req_remove_event() to spapr_hotplug_req_remove_by_index()
so that they match with spapr_hotplug_req_add_by_count().
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
PAPR requires ibm,req#msi and ibm,req#msi-x to be present in the
device node to define the number of msi/msi-x interrupts the device
supports, respectively.
Currently we have ibm,req#msi-x hardcoded to a non-sensical constant
that happens to be 2, and are missing ibm,req#msi entirely. The result
of that is that msi-x capable devices get limited to 2 msi-x
interrupts (which can impact performance), and msi-only devices likely
wouldn't work at all. Additionally, if devices expect a minimum that
exceeds 2, the guest driver may fail to load entirely.
SLOF still owns the generation of these properties at boot-time
(although other device properties have since been offloaded to QEMU),
but for hotplugged devices we rely on the values generated by QEMU
and thus hit the limitations above.
Fix this by generating these properties in QEMU as expected by guests.
In the future it may make sense to modify SLOF to pass through these
values directly as we do with other props since we're duplicating SLOF
code.
Cc: qemu-ppc@nongnu.org
Cc: qemu-stable@nongnu.org
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
This introduces rtas_ldq() to load 64-bits parameter from continuous
two 4-bytes memory chunk of RTAS parameter buffer, to simplify the
code.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Currently, rtas_ibm_change_msi() always returns four values even if
less are specified.
Correct this by only returning the fourth parameter if it was
requested.
This is specified by PAPR.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
My Coccinelle semantic patch finds a few more, because it also fixes up
the equally pointless conditional
if (foo) {
free(foo);
foo = NULL;
}
Result (feel free to squash it into your patch):
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
There might have emulated PCI devices, together with VFIO PCI
devices under one PHB. The EEH capability shouldn't enabled
on emulated PCI devices.
The patch returns error when enabling EEH capability on emulated
PCI devices by RTAS call "ibm,set-eeh-option".
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
* phb_index is not being used and if required can be obtained from sphb
* use helper to get drc_index in spapr_populate_pci_child_dt()
* Check if drc_index is zero
Suggested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Each hardware instance has a platform unique location code. The OF
device tree that describes a part of a hardware entity must include
the “ibm,loc-code” property with a value that represents the location
code for that hardware entity.
Populate ibm,loc-code.
1) PCI passthru devices need to identify with its own ibm,loc-code
available on the host. In failure cases use:
vfio_<name>:<phb-index>:<bus>:<slot>.<fn>
2) Emulated devices encode as following:
qemu_<name>:<phb-index>:<bus>:<slot>.<fn>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
All the PCI enumeration and device node creation was off-loaded to
SLOF. With PCI hotplug support, code needed to be added to add device
node. This creates multiple copy of the code one in SLOF and other in
hotplug code. To unify this, the patch adds the pci device node
creation in Qemu. For backward compatibility, a flag
"qemu,phb-enumerated" is added to the phb, suggesting to SLOF to not
do device node creation.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[ Squashed Michael's drc_index changes ]
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
(g_hash_table_iter_*)"
Since we now require GLib 2.22+ (commit f40685c), we don't have to
work around lack of g_hash_table_iter_init() & friends anymore.
This reverts commit f8833a37c0c6b22ddd57b45e48cfb0f97dbd5af4.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Device node names should encode the unit address as hex, while the
code was encodind it as integers.
Also, use FDT_NAME_MAX macro for allocating and composing the name.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Current code missed the Prog IF register. All Class Code, Subclass,
and Prog IF registers are needed to identify the accurate device type.
For example: USB controllers use the PROG IF for denoting: USB
FullSpeed, HighSpeed or SuperSpeed.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The properties reg/assigned-resources need to encode 64-bit memory
address space as part of phys.hi dword.
00 if configuration space
01 if IO region,
10 if 32-bit MEM region
11 if 64-bit MEM region
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The code for -machine pseries maintains a global sPAPREnvironment structure
which keeps track of general state information about the guest platform.
This predates the existence of the MachineState structure, but performs
basically the same function.
Now that we have the generic MachineState, fold sPAPREnvironment into
sPAPRMachineState, the pseries specific subclass of MachineState.
This is mostly a matter of search and replace, although a few places which
relied on the global spapr variable are changed to find the structure via
qdev_get_machine().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
This uses extension of existing EPOW interrupt/event mechanism
to notify userspace tools like librtas/drmgr to handle
in-guest configuration/cleanup operations in response to
device_add/device_del.
Userspace tools that don't implement this extension will need
to be run manually in response/advance of device_add/device_del,
respectively.
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This enables hotplug of PCI devices to a PHB. Upon hotplug we
generate the OF-nodes required by PAPR specification and
IEEE 1275-1994 "PCI Bus Binding to Open Firmware" for the
device.
We associate the corresponding FDT for these nodes with the DRC
corresponding to the slot, which will be fetched via
ibm,configure-connector RTAS calls by the guest as described by PAPR
specification.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
These will be used to support hotplug/unplug of PCI devices to the PCI
bus associated with a particular PHB.
We also set up device-tree properties in each PHBs initial FDT to
describe the DRCs associated with them. This advertises to guests that
each PHB is DR-capable device with physical hotpluggable slots, each
managed by the corresponding DRC. This is necessary for allowing
hotplugging of devices to it later via bus rescan or guest rpaphp
hotplug module.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This option enables/disables PCI hotplug for a particular PHB.
Also add machine compatibility code to disable it by default for machine
types prior to pseries-2.4.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: move commas for compat fields]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This replaces object_child_foreach() and callback with existing
SPAPR_PCI_LIOBN() and spapr_tce_find_by_liobn() to make the code easier
to read.
This is a mechanical patch so no behaviour change is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This makes find_phb()/find_dev() public and changed its names
to spapr_pci_find_phb()/spapr_pci_find_dev() as they are going to
be used from other parts of QEMU such as VFIO DDW (dynamic DMA window)
or VFIO PCI error injection or VFIO EEH handling - in all these
cases there are RTAS calls which are addressed to BUID+config_addr
in IEEE1275 format.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This gets rid of a magic constant describing the default DMA window size
for an emulated PHB.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
We are going to have multiple DMA windows per PHB and we want them to
migrate so we need a predictable way of assigning LIOBNs.
This introduces a macro which makes up a LIOBN from fixed prefix,
PHB index (unique PHB id) and window number.
This introduces a SPAPR_PCI_DMA_WINDOW_NUM() to know the window number
from LIOBN. It is used to distinguish the default 32bit windows from
dynamic windows and avoid picking default DMA window properties from
a wrong TCE table.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
spapr_pci.c contains a number of expressions of the form (uval == -1) or
(uval != -1), where 'uval' is an unsigned value.
This mostly works in practice, because as long as the width of uval is
greater or equal than that of (int), the -1 will be promoted to the
unsigned type, which is the expected outcome.
However, at least for the cases where uval is uint32_t, this would break
on platforms where sizeof(int) > 4 (and a few such do exist), because then
the uint32_t value would be promoted to the larger int type, and never be
equal to -1.
This patch fixes these errors. The fixes for the (uint32_t) cases are
necessary as described above. I've made similar fixes to (uint64_t) and
(hwaddr) cases. Those are strictly theoretical, since I don't know of any
platforms where sizeof(int) > 8, but hey, it's not that hard so we might
as well be strictly C standard compliant.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The emulation for EEH RTAS requests from guest isn't covered
by QEMU yet and the patch implements them.
The patch defines constants used by EEH RTAS calls and adds
callbacks sPAPRPHBClass::{eeh_set_option, eeh_get_state, eeh_reset,
eeh_configure}, which are going to be used as follows:
* RTAS calls are received in spapr_pci.c, sanity check is done
there.
* RTAS handlers handle what they can. If there is something it
cannot handle and the corresponding sPAPRPHBClass callback is
defined, it is called.
* Those callbacks are only implemented for VFIO now. They do ioctl()
to the IOMMU container fd to complete the calls. Error codes from
that ioctl() are transferred back to the guest.
[aik: defined RTAS tokens for EEH RTAS calls]
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
When the guest switches the interrupt endian mode, which essentially
means a global machine endian switch, we want to change the VGA
framebuffer endian mode as well in order to be backward compatible
with existing guests who don't know about the new endian control
register.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
At the moment sPAPR only supports 512MB window for MMIO BARs. However
modern devices might want bigger 64bit BARs.
This extends MMIO window from 512MB to 62GB (aligned to
SPAPR_PCI_WINDOW_SPACING) and advertises it in 2 records in
the PHB "ranges" property. 32bit gets the space from
SPAPR_PCI_MEM_WIN_BUS_OFFSET till the end of 4GB, 64bit gets the rest
of the space. If no space is left, 64bit range is not advertised.
The MMIO space size is set to old value of 0x20000000 by default
for pseries machines older than 2.3.
The approach changes the device tree which is a guest visible change, however
it won't break migration as:
1. we do not support migration to older QEMU versions
2. migration to newer QEMU will migrate the device tree as well and since
the new layout only extends the old one and does not change address mappigns,
no breakage is expected here too.
SLOF change is required to utilize this extension.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
pseries guests can have large numbers of PCI host bridges. To avoid the
user having to specify a number of different configuration values for every
one, the device supports an "index" property which is a shorthand setting
the various window and configuration addresses from a predefined sensible
set.
There are some problems with the details at present:
* The "index" propery is signed, but negative values will create PCI
windows below where we expect, potentially colliding with other devices
* No limit is imposed on the "index" property and large values can
translate to extremely large window addresses. With PCI passthrough in
particular this can mean we exceed various mapping and physical address
limits causing the guest host bridge to not work in strange ways.
This patch addresses this, by making "index" unsigned, and imposing a
limit. Currently the limit allows indices from 0..255 which is probably
enough host bridges for the time being. It's fairly easy to extend if
we discover we need more.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The g_hash_table_iter_* functions for iterating through a hash table
are not present in glib 2.12, which is our current minimum requirement.
Rewrite the code to use g_hash_table_foreach() instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
On sPAPR, virtio devices are connected to the PCI bus and use MSI-X.
Commit cc943c36faa192cd4b32af8fe5edb31894017d35 has modified MSI-X
so that writes are made using the bus master address space and follow
the IOMMU path.
Unfortunately, the IOMMU address space address space does not have an
MSI window: the notification is silently dropped in unassigned_mem_write
instead of reaching the guest... The most visible effect is that all
virtio devices are non-functional on sPAPR since then. :(
This patch does the following:
1) map the MSI window into the IOMMU address space for each PHB
- since each PHB instantiates its own IOMMU address space, we
can safely map the window at a fixed address (SPAPR_PCI_MSI_WINDOW)
- no real need to keep the MSI window setup in a separate function,
the spapr_pci_msi_init() code moves to spapr_phb_realize().
2) kill the global MSI window as it is not needed in the end
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
When disabling MSI/MSIX via "ibm,change-msi" RTAS call, no check was made
if MSI or MSIX is actually supported and the MSI message was reset
unconditionally. If this happened on a device which does not support MSI
(but does support MSIX, otherwise "ibm,change-msi" would not be called),
this device would have PCIDevice::msi_cap field (MSI capability offset)
set to zero and writing a vector would actually clear PCI status.
This clears MSI message only if MSI or MSIX is present on a device.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Currently SPAPR PHB keeps track of all allocated MSI (here and below
MSI stands for both MSI and MSIX) interrupt because
XICS used to be unable to reuse interrupts. This is a problem for
dynamic MSI reconfiguration which happens when guest reloads a driver
or performs PCI hotplug. Another problem is that the existing
implementation can enable MSI on 32 devices maximum
(SPAPR_MSIX_MAX_DEVS=32) and there is no good reason for that.
This makes use of new XICS ability to reuse interrupts.
This reorganizes MSI information storage in sPAPRPHBState. Instead of
static array of 32 descriptors (one per a PCI function), this patch adds
a GHashTable when @config_addr is a key and (first_irq, num) pair is
a value. GHashTable can dynamically grow and shrink so the initial limit
of 32 devices is gone.
This changes migration stream as @msi_table was a static array while new
@msi_devs is a dynamic hash table. This adds temporary array which is
used for migration, it is populated in "spapr_pci"::pre_save() callback
and expanded into the hash table in post_load() callback. Since
the destination side does not know the number of MSI-enabled devices
in advance and cannot pre-allocate the temporary array to receive
migration state, this makes use of new VMSTATE_STRUCT_VARRAY_ALLOC macro
which allocates the array automatically.
This resets the MSI configuration space when interrupts are released by
the ibm,change-msi RTAS call.
This fixed traces to be more informative.
This changes vmstate_spapr_pci_msi name from "...lsi" to "...msi" which
was incorrect by accident. As the internal representation changed,
thus bumps migration version number.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: drop g_malloc_n usage]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The current allocator returns IRQ numbers from a pool and does not
support IRQs reuse in any form as it did not keep track of what it
previously returned, it only keeps the last returned IRQ. Some use
cases such as PCI hot(un)plug may require IRQ release and reallocation.
This moves an allocator from SPAPR to XICS.
This switches IRQ users to use new API.
This uses LSI/MSI flags to know if interrupt is allocated.
The interrupt release function will be posted as a separate patch.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
POWER KVM supports an KVM_CAP_SPAPR_TCE capability which allows allocating
TCE tables in the host kernel memory and handle H_PUT_TCE requests
targeted to specific LIOBN (logical bus number) right in the host without
switching to QEMU. At the moment this is used for emulated devices only
and the handler only puts TCE to the table. If the in-kernel H_PUT_TCE
handler finds a LIOBN and corresponding table, it will put a TCE to
the table and complete hypercall execution. The user space will not be
notified.
Upcoming VFIO support is going to use the same sPAPRTCETable device class
so KVM_CAP_SPAPR_TCE is going to be used as well. That means that TCE
tables for VFIO are going to be allocated in the host as well.
However VFIO operates with real IOMMU tables and simple copying of
a TCE to the real hardware TCE table will not work as guest physical
to host physical address translation is requited.
So until the host kernel gets VFIO support for H_PUT_TCE, we better not
to register VFIO's TCE in the host.
This adds a place holder for KVM_CAP_SPAPR_TCE_VFIO capability. It is not
in upstream yet and being discussed so now it is always false which means
that in-kernel VFIO acceleration is not supported.
This adds a bool @vfio_accel flag to the sPAPRTCETable device telling
that sPAPRTCETable should not try allocating TCE table in the host kernel
for VFIO. The flag is false now as at the moment there is no VFIO.
This adds an vfio_accel parameter to spapr_tce_new_table(), the semantic
is the same. Since there is only emulated PCI and VIO now, the flag is set
to false. Upcoming VFIO support will set it to true.
This is a preparation patch so no change in behaviour is expected
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
At the moment spapr_rtas_register() allocates a new token number for every
new RTAS callback so numbers are not fixed and depend on the number of
supported RTAS handlers and the exact order of spapr_rtas_register() calls.
These tokens are copied into the device tree and remain the same during
the guest lifetime.
When we start another guest to receive a migration, it calls
spapr_rtas_register() as well. If the number of RTAS handlers or their
order is different in QEMU on source and destination sides, the "/rtas"
node in the device tree will differ. Since migration overwrites the device
tree (as it overwrites the entire RAM), the actual RTAS config on
the destination side gets broken.
This defines global contant values for every RTAS token which QEMU
is using today.
This changes spapr_rtas_register() to accept a token number instead of
allocating one. This changes all users of spapr_rtas_register().
This changes XICS-KVM not to cache tokens registered with KVM as they
constant now.
This makes TOKEN_BASE global as RTAS_XXX use TOKEN_BASE as
a base. TOKEN_MAX is moved and renamed too and its value is changed
to the last token + 1. Boundary checks for token values are adjusted.
This reserves token numbers for "os-term" handlers and PCI hotplug
which we are working on.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Hotplug of multiple disks fails due to MSI vector quota check.
Number of MSI vectors default to 8 allowing only 4 devices.
This happens on RHEL6.5 guest. RHEL7 and SLES11 guests fallback
to INTX.
One way to workaround the issue is to increase total MSIs,
so that MSI quota check allows us to hotplug multiple disks.
This sets the quota to the maximum number of interupts XICS has
which is 1024 now (XICS_IRQS). This moves XICS_IRQS from spapr.c
to xics.h for wider visibility.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
[aik: put XICS_IRQS=1024 instead of 64i, fixed endianness and size]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
