| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Now that we finally check for presence of dangling sysbus devices, make check
started complaining that the sPAPR PHB is one such device.
However, it really isn't. The spapr PHB is not really a traditional sysbus
device, but much more a special spapr pv device which is already able to get
created dynamically.
Move spapr to its own dynamic sysbus check handling and allow PHB devices to
get allocated dynamically.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This patch adds support to expose eTSEC devices in the dynamically created
guest facing device tree. This allows us to expose eTSEC devices into guests
without changes in the machine file.
Because we can now tell the guest about eTSEC devices this patch allows the
user to specify eTSEC devices via -device at all.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
For e500 our approach to supporting dynamically spawned sysbus devices is to
create a simple bus from the guest's point of view within which we map those
devices dynamically.
We allocate memory regions always within the "platform" hole in address
space and map IRQs to predetermined IRQ lines that are reserved for platform
device usage.
This maps really nicely into device tree logic, so we can just tell the
guest about our virtual simple bus in device tree as well.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The g_hash_table_iter_* functions for iterating through a hash table
are not present in glib 2.12, which is our current minimum requirement.
Rewrite the code to use g_hash_table_foreach() instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Now that we have a working GPIO controller on the virt machine, we can use
one pin to notify QEMU that the guests wants to power off the system.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
With the e500 virt machine, we don't have to adhere to the exact hardware
layout of an mpc8544ds board. So there we can just add a qoriq compatible
GPIO controller into the system that we can add a power off hook to.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The MemoryRegionOps struct pci4xx_cfgaddr_ops and the read and
write functions it references are all unused; remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
As of qemu-2.1, spapr/pseries, has a set of versioned machine classes to
represent the machine type as it appeared to the guest in different qemu
versions. This allows for safe migration of guests between current and
future qemu versions.
However, these are organized a bit differently from those for PC: on PC,
the default plain "pc" machine type is just an alias for the most recent
versioned machine type. In sPAPR, it names the base machine class from
which the versioned types are derived.
The PC approach is preferable; it makes it clearer which explicit version
is the current one. Additionally updating the "current" machine as the
base class makes it even more likely than otherwise to incorrectly alter
the versioned machines' behaviour when updating the current machine.
Therefore this patch changes sPAPR to the PC approach - the base class
becomes abstract, and plain "pseries" becomes an alias for the most
recent versioned machine class. Since qemu-2.1 is now released, we also
create a new pseries-2.2 machine type, to incorporate changes during this
development cycle (for now it is identical to pseries-2.1).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The virtex-ml507 is a Xilinx CPU based system, and requires several sub
devices which are only included with CONFIG_XILINX. Therefore, it should
only be compiled if CONFIG_XILINX is set.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
pc, virtio, misc bugfixes
A bunch of minor bugfixes all over the place.
changes from v2:
added cpu hotplug rework
added default vga type switch
more fixes
changes from v1:
fix for test re-generation script
add missing acks to two patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 03 Nov 2014 16:33:13 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
vga: flip qemu 2.2 pc machine types from cirrus to stdvga
vga: add default display to machine class
vhost-user: fix mmap offset calculation
hw/i386/acpi-build.c: Fix memory leak in acpi_build_tables_cleanup()
smbios: Encode UUID according to SMBIOS specification
pc: Add pc_compat_2_1() function
hw/virtio/vring/event_idx: fix the vring_avail_event error
hw/pci: fixed hotplug crash when using rombar=0 with devices having romfile
hw/pci: fixed error flow in pci_qdev_init
-machine vmport=off: Allow disabling of VMWare ioport emulation
acpi/cpu-hotplug: introduce helper function to keep bit setting in one place
cpu-hotplug: rename function for better readability
qom/cpu: remove the unused CPU hot-plug notifier
pc: Update rtc_cmos in pc_cpu_plug
pc: add cpu hotplug handler to PC_MACHINE
acpi:piix4: convert cpu hotplug to hotplug_handler API
acpi:ich9: convert cpu hotplug to hotplug_handler API
acpi/cpu: add cpu hotplug callback function to match hotplug_handler API
acpi: create separate file for TCPA log
tests: fix rebuild-expected-aml.sh for acpi-test rename
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Such address translation is needed when load address recorded in uImage
is a virtual address. When the actual load address is requested, return
untranslated address: user that needs the translated address can always
apply translation function to it and those that need it untranslated
don't need to do the inverse translation.
Add translation function pointer and its parameter to uimage_load
prototype. Update all existing users.
No user-visible functional changes.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
|
|
Current support for bus master (clearing OK bit) together with the need to
support guests which do not enable PCI bus mastering, leads to extra state in
VIRTIO_PCI_FLAG_BUS_MASTER_BUG bit, which isn't robust in case of cross-version
migration for the case when guests use the device before setting DRIVER_OK.
Rip out this code, and replace it:
- Modern QEMU doesn't need VIRTIO_PCI_FLAG_BUS_MASTER_BUG
so just drop it for latest machine type.
- For compat machine types, set PCI_COMMAND if DRIVER_OK
is set.
As this is needed for 2.1 for both pc and ppc, move PC_COMPAT macros from pc.h
to a new common header.
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
|
|
Device models should access their block backends only through the
block-backend.h API. Convert them, and drop direct includes of
inappropriate headers.
Just four uses of BlockDriverState are left:
* The Xen paravirtual block device backend (xen_disk.c) opens images
itself when set up via xenbus, bypassing blockdev.c. I figure it
should go through qmp_blockdev_add() instead.
* Device model "usb-storage" prompts for keys. No other device model
does, and this one probably shouldn't do it, either.
* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
which has only the BlockDriverState.
* PC87312State has an unused BlockDriverState[] member.
The next two commits take care of the latter two.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there. It's a block layer thing anyway, not just a
block driver thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The patch is big, but all it really does is replacing
dinfo->bdrv
by
blk_bs(blk_by_legacy_dinfo(dinfo))
The replacement is repetitive, but the conversion of device models to
BlockBackend is imminent, and will shorten it to just
blk_legacy_dinfo(dinfo).
Line wrapping muddies the waters a bit. I also omit tests whether
dinfo->bdrv is null, because it never is.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Instead of duplicating the logic for the if_ide
(bus,unit) mappings, rely on the blockdev layer
for managing those mappings for us, and use the
drive_get_by_index call instead.
This allows ide_drive_get to work for AHCI HBAs
as well, and can be used in the Q35 initialization.
Lastly, change the nature of the argument to
ide_drive_get so that represents the number of
total drives we can support, and not the total
number of buses. This will prevent array overflows
if the units-per-default-bus property ever needs
to be adjusted for compatibility reasons.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
formated -> formatted
gaurantee -> guarantee
shear -> sheer
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
- Memory: improve error reporting and avoid crashes on hotplug
- Build: fixing block/iscsi.so and ranlib warnings on Mac OS X
- Migration fixes for x86
- The odd KVM patch.
# gpg: Signature made Thu 11 Sep 2014 11:21:10 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (21 commits)
gdbstub: init mon_chr through qemu_chr_alloc
pckbd: adding new fields to vmstate
mc146818rtc: add missed field to vmstate
piix: do not set irq while loading vmstate
serial: fixing vmstate for save/restore
parallel: adding vmstate for save/restore
fdc: adding vmstate for save/restore
cpu: init vmstate for ticks and clock offset
apic_common: vapic_paddr synchronization fix
vl: use QLIST_FOREACH_SAFE to visit change state handlers
exec: add parameter errp to gethugepagesize
exec: report error when memory < hpagesize
hostmem-ram: don't exit qemu if size of memory-backend-ram is way too big
memory: add parameter errp to memory_region_init_rom_device
memory: add parameter errp to memory_region_init_ram
exec: add parameter errp to qemu_ram_alloc and qemu_ram_alloc_from_ptr
rules.mak: Fix DSO build by pulling in archive symbols
util: Don't link host-utils.o if it's empty
util: Move general qemu_getauxval to util/getauxval.c
trace: Only link generated-tracers.o with "simple" backend
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add parameter errp to memory_region_init_ram and update all call sites
to pass in &error_abort.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
into staging
Patch queue for ppc - 2014-09-08
Alexander Graf (11):
PPC: KVM: Fix g3beige and mac99 when HV is loaded
PPC: mac99: Move NVRAM to page boundary when necessary
KVM: Add helper to run KVM_CHECK_EXTENSION on vm fd
PPC: KVM: Use vm check_extension for pv hcall
PPC: mac99: Fix core99 timer frequency
PPC: mac_nvram: Remove unused functions
PPC: mac_nvram: Allow 2 and 4 byte accesses
PPC: mac_nvram: Split NVRAM into OF and OSX parts
PPC: Mac: Move tbfreq into local variable
PPC: Cuda: Use cuda timer to expose tbfreq to guest
PPC: Fix default config ordering and add eTSEC for ppc64
Alexey Kardashevskiy (7):
spapr: Move DT memory node rendering to a helper
spapr: Use DT memory node rendering helper for other nodes
spapr: Refactor spapr_populate_memory() to allow memoryless nodes
spapr: Split memory nodes to power-of-two blocks
spapr: Add a helper for node0_size calculation
spapr: Fix ibm, associativity for memory nodes
spapr_pci: Fix config space corruption
Anton Blanchard (2):
spapr-vlan: Don't touch last entry in buffer list
hypervisor property clashes with hypervisor node
Benjamin Herrenschmidt (2):
loader: Add load_image_size() to replace load_image()
spapr: Locate RTAS and device-tree based on real RMA
Bharat Bhushan (4):
ppc: debug stub: Get trap instruction opcode from KVM
ppc: synchronize excp_vectors for injecting exception
ppc: Add software breakpoint support
ppc: Add hw breakpoint watchpoint support
Gonglei (1):
spapr: fix possible memory leak
Greg Kurz (1):
spapr_pci: map the MSI window in each PHB
Nikunj A Dadhania (3):
ppc: spapr-rtas - implement os-term rtas call
spapr: add uuid/host details to device tree
ppc/spapr: Fix MAX_CPUS to 255
Peter Maydell (1):
hw/ppc/spapr_hcall.c: Fix typo in function names
Tom Musta (20):
linux-user: Fix Stack Pointer Bug in PPC setup_rt_frame
linux-user: Split PPC Trampoline Encoding from Register Save
linux-user: Enable Signal Handlers on PPC64
linux-user: Properly Dereference PPC64 ELFv1 Signal Handler Pointer
linux-user: Implement do_setcontext for PPC64
linux-user: Handle PPC64 ELFv2 Function Pointers
target-ppc: Bug Fix: rlwinm
target-ppc: Bug Fix: rlwnm
target-ppc: Bug Fix: rlwimi
target-ppc: Bug Fix: mullwo
target-ppc: Bug Fix: mullw
target-ppc: Bug Fix: mulldo OV Detection
target-ppc: Bug Fix: srawi
target-ppc: Bug Fix: srad
target-ppc: Special Case of rlwimi Should Use Deposit
target-ppc: Optimize rlwinm MB=0 ME=31
target-ppc: Optimize rlwnm MB=0 ME=31
target-ppc: Clean Up mullw
target-ppc: Clean up mullwo
target-ppc: Implement mulldo with TCG
# gpg: Signature made Mon 08 Sep 2014 11:51:15 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found
* remotes/agraf/tags/signed-ppc-for-upstream: (52 commits)
hypervisor property clashes with hypervisor node
PPC: Fix default config ordering and add eTSEC for ppc64
spapr_pci: map the MSI window in each PHB
target-ppc: Implement mulldo with TCG
target-ppc: Clean up mullwo
target-ppc: Clean Up mullw
target-ppc: Optimize rlwnm MB=0 ME=31
target-ppc: Optimize rlwinm MB=0 ME=31
target-ppc: Special Case of rlwimi Should Use Deposit
spapr-vlan: Don't touch last entry in buffer list
spapr_pci: Fix config space corruption
PPC: Cuda: Use cuda timer to expose tbfreq to guest
PPC: Mac: Move tbfreq into local variable
PPC: mac_nvram: Split NVRAM into OF and OSX parts
PPC: mac_nvram: Allow 2 and 4 byte accesses
PPC: mac_nvram: Remove unused functions
PPC: mac99: Fix core99 timer frequency
PPC: KVM: Use vm check_extension for pv hcall
KVM: Add helper to run KVM_CHECK_EXTENSION on vm fd
target-ppc: Bug Fix: srad
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
dtc fails on a recent QEMU snapshot:
ERROR (name_properties): "name" property in /hypervisor#1 is incorrect ("hypervisor" instead of base node name)
Looking at the device tree we have a hypervisor property:
# lsprop hypervisor
hypervisor "kvm"
But we also have a hypervisor node, with a name that doesn't match:
# lsprop hypervisor#1/
name "hypervisor"
compatible "linux,kvm"
linux,phandle 7e5eb5d8 (2120136152)
Commit c08ce91d309c (spapr: add uuid/host details to device tree)
looks to have collided with an earlier patch. Remove the hypervisor
property.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
On sPAPR, virtio devices are connected to the PCI bus and use MSI-X.
Commit cc943c36faa192cd4b32af8fe5edb31894017d35 has modified MSI-X
so that writes are made using the bus master address space and follow
the IOMMU path.
Unfortunately, the IOMMU address space address space does not have an
MSI window: the notification is silently dropped in unassigned_mem_write
instead of reaching the guest... The most visible effect is that all
virtio devices are non-functional on sPAPR since then. :(
This patch does the following:
1) map the MSI window into the IOMMU address space for each PHB
- since each PHB instantiates its own IOMMU address space, we
can safely map the window at a fixed address (SPAPR_PCI_MSI_WINDOW)
- no real need to keep the MSI window setup in a separate function,
the spapr_pci_msi_init() code moves to spapr_phb_realize().
2) kill the global MSI window as it is not needed in the end
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
When disabling MSI/MSIX via "ibm,change-msi" RTAS call, no check was made
if MSI or MSIX is actually supported and the MSI message was reset
unconditionally. If this happened on a device which does not support MSI
(but does support MSIX, otherwise "ibm,change-msi" would not be called),
this device would have PCIDevice::msi_cap field (MSI capability offset)
set to zero and writing a vector would actually clear PCI status.
This clears MSI message only if MSI or MSIX is present on a device.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Mac OS X calibrates a number of frequencies on bootup based on reading
tb values on bootup and comparing them to via cuda timer values.
The only variable we can really steer well (thanks to KVM) is the cuda
frequency. So let's use that one to fake Mac OS X into believing the
bus frequency is tbfreq * 4. That way Mac OS X will automatically
calculate the correct timebase frequency.
With this patch and the patch set I posted earlier I can successfully
run Mac OS X 10.2, 10.3 and 10.4 guests with -M mac99 on TCG and KVM.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
We already expose the real CPU's tb frequency to the guest via fw_cfg. Soon
we will need to also expose it to the MacIO, so let's move it to a variable
that we can leverage every time we need the frequency.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The macio_nvram_read and macio_nvram_write functions are never called,
just remove them.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
MAX_CPUS 256 is inconsistent with qemu supporting upto 255 cpus. This
MAX_CPUS number was percolated back to "virsh capabilities" with wrong
max_cpus.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
We currently calculate the final RTAS and FDT location based on
the early estimate of the RMA size, cropped to 256M on KVM since
we only know the real RMA size at reset time which happens much
later in the boot process.
This means the FDT and RTAS end up right below 256M while they
could be much higher, using precious RMA space and limiting
what the OS bootloader can put there which has proved to be
a problem with some OSes (such as when using very large initrd's)
Fortunately, we do the actual copy of the device-tree into guest
memory much later, during reset, late enough to be able to do it
using the final RMA value, we just need to move the calculation
to the right place.
However, RTAS is still loaded too early, so we change the code to
load the tiny blob into qemu memory early on, and then copy it into
guest memory at reset time. It's small enough that the memory usage
doesn't matter.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[aik: fixed errors from checkpatch.pl, defined RTAS_MAX_ADDR]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: fix compilation on 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
We want the associtivity lists of memory and CPU nodes to match but
memory nodes have incorrect domain#3 which is zero for CPU so they won't
match.
This clears domain#3 in the list to match CPUs associtivity lists.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
In multiple places there is a node0_size variable calculation
which assumes that NUMA node #0 and memory node #0 are the same
things which they are not. Since we are going to change it and
do not want to change it in multiple places, let's make a helper.
This adds a spapr_node0_size() helper and makes use of it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Linux kernel expects nodes to have power-of-two size and
does WARN_ON if this is not the case:
[ 0.041456] WARNING: at drivers/base/memory.c:115
which is:
===
/* Validate blk_sz is a power of 2 and not less than section size */
if ((block_sz & (block_sz - 1)) || (block_sz < MIN_MEMORY_BLOCK_SIZE)) {
WARN_ON(1);
block_sz = MIN_MEMORY_BLOCK_SIZE;
}
===
This splits memory nodes into set of smaller blocks with
a size which is a power of two. This makes sure the start
address of every node is aligned to the node size.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: squash windows compile fix in]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Current QEMU does not support memoryless NUMA nodes, however
actual hardware may have them so it makes sense to have a way
to emulate them in QEMU. This prepares SPAPR for that.
This moves 2 calls of spapr_populate_memory_node() into
the existing loop over numa nodes so first several nodes may
have no memory and this still will work.
If there is no numa configuration, the code assumes there is just
a single node at 0 and it has all the guest memory.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This finishes refactoring by using the spapr_populate_memory_node helper
for all nodes and removing leftovers from spapr_populate_memory().
This is not a part of the previous patch because the patches look
nicer apart.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This moves recurring bits of code related to memory@xxx nodes
creation to a helper.
This makes use of the new helper for node@0.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
get_boot_devices_list() will malloc memory, spapr_finalize_fdt
doesn't free it.
Signed-off-by: Chenliang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
When running KVM we have to adhere to host page boundaries for memory slots.
Unfortunately the NVRAM on mac99 is a 4k RAM hole inside of an MMIO flash
area.
So if our host is configured with 64k page size, we can't use the mac99 target
with KVM. This is a real shame, as this limitation is not really an issue - we
can easily map NVRAM somewhere else and at least Linux and Mac OS X use it
at their new location.
So in that emergency case when it's about failing to run at all and moving NVRAM
to a place it shouldn't be at, choose the latter.
This patch enables -M mac99 with KVM on 64k page size hosts.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Useful for identifying the guest/host uniquely within the
guest. Adding following properties to the guest root node.
vm,uuid - uuid of the guest
host-model - Host model number
host-serial - Host machine serial number
hypervisor type - Tells its "kvm"
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Fix a typo in the names of a couple of functions
(s/resouce/resource/).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
PAPR compliant guest calls this in absence of kdump. This finally
reaches the guest and can be handled according to the policies set by
higher level tools(like taking dump) for further analysis by tools like
crash.
Linux kernel calls ibm,os-term when extended property of os-term is set.
This makes sure that a return to the linux kernel is gauranteed.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[agraf: reduce RTAS_TOKEN_MAX]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
On PPC we have 2 different styles of KVM: PR and HV. HV can only virtualize
sPAPR guests while PR can virtualize everything that's reasonably close to
the host hardware platform.
As long as only one kernel module (PR or HV) is loaded, the "default" kvm type
is the module that's loaded. So if your hardware only supports PR mode you can
easily spawn a Mac VM.
However, if both HV and PR are loaded we default to HV mode. And in that case
the Mac machines have to explicitly ask for PR mode to get a working VM.
Fix this up by explicitly having the Mac machines ask for PR style KVM. This
fixes bootup of Mac VMs on systems where bot HV and PR kvm modules are loaded
for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
pci, pc fixes, features
A bunch of bugfixes - these will make sense for 2.1.1
Initial Intel IOMMU support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 02 Sep 2014 16:05:04 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vhost_net: start/stop guest notifiers properly
pci: avoid losing config updates to MSI/MSIX cap regs
virtio-net: don't run bh on vm stopped
ioh3420: remove unused ioh3420_init() declaration
vhost_net: cleanup start/stop condition
intel-iommu: add IOTLB using hash table
intel-iommu: add context-cache to cache context-entry
intel-iommu: add supports for queued invalidation interface
intel-iommu: fix coding style issues around in q35.c and machine.c
intel-iommu: add Intel IOMMU emulation to q35 and add a machine option "iommu" as a switch
intel-iommu: add DMAR table to ACPI tables
intel-iommu: introduce Intel IOMMU (VT-d) emulation
iommu: add is_write as a parameter to the translate function of MemoryRegionIOMMUOps
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
MemoryRegionIOMMUOps
Add a bool variable is_write as a parameter to the translate function of
MemoryRegionIOMMUOps to indicate the operation of the access. It can be
used for correct fault reporting from within the callback.
Change the interface of related functions.
Signed-off-by: Le Tan <tamlokveer@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This implements an NMI interface POWERPC SPAPR machine.
This enables an "nmi" HMP/QMP command supported on SPAPR.
This calls POWERPC_EXCP_RESET (vector 0x100) in the guest to deliver NMI
to every CPU. The expected result is XMON (in-kernel debugger) invocation.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
SCSI changes that enable sending vendor-specific commands via virtio-scsi.
Memory changes for QOMification and automatic tracking of MR lifetime.
# gpg: Signature made Mon 18 Aug 2014 13:03:09 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
mtree: remove write-only field
memory: Use canonical path component as the name
memory: Use memory_region_name for name access
memory: constify memory_region_name
exec: Abstract away ref to memory region names
loader: Abstract away ref to memory region names
tpm_tis: remove instance_finalize callback
memory: remove memory_region_destroy
memory: convert memory_region_destroy to object_unparent
ioport: split deletion and destruction
nic: do not destroy memory regions in cleanup functions
vga: do not dynamically allocate chain4_alias
sysbus: remove unused function sysbus_del_io
qom: object: move unparenting to the child property's release callback
qom: object: delete properties before calling instance_finalize
virtio-scsi: implement parse_cdb
scsi-block, scsi-generic: implement parse_cdb
scsi-block: extract scsi_block_is_passthrough
scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo
scsi-bus: prepare scsi_req_new for introduction of parse_cdb
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Explicitly call object_unparent in the few places where we
will re-create the memory region. If the memory region is
simply being destroyed as part of device teardown, let QOM
handle it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
To indicate the IRQs are initially disconnected.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
commit e938ba0c tried to enable -mem-path for ppc but breaked some ppc
boards.
The problems are:
1. it fails when allocating memory for rom, sram whose sizes are less
than huge page size:
./ppc-softmmu/qemu-system-ppc -m 512 -mem-path /hugepages/ \
-kernel /home/hutao/Downloads/vmlinux-ppc -initrd \
/home/hutao/Downloads/initrd-ppc.gz
qemu-system-ppc: /mnt/data/projects/qemu/exec.c:1184: qemu_ram_set_idstr: Assertion `new_block' failed.
2. if there is a numa node backed by memory backend object, qemu fails
with message:
./ppc-softmmu/qemu-system-ppc -m 512 \
-object memory-backend-file,size=512M,mem-path=/hugepages,id=f0 \
-numa node,nodeid=0,memdev=f0 \
-kernel /home/hutao/Downloads/vmlinux-ppc \
-initrd /home/hutao/Downloads/initrd-ppc.gz
qemu-system-ppc: memory backend f0 is used multiple times. Each -numa option must use a different memdev value.
This patch does following:
1. replaces memory_region_allocate_system_memory() with
memory_region_init_ram() for rom, sram. Then only system memory
is backed by hugepages when specifying mem-path.
2. for memory banks, allocates all ram with
one memory_region_allocate_system_memory(), and use
memory_region_init_alias() to initialize memory banks.
Tested machines: default(g3beige), mac99, taihu, bamboo, ref405ep.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The permission of TCE entry should exclude physical base address.
Otherwise, unmapping TCE entry can be interpreted to mapping TCE
entry wrongly for VFIO devices.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
0b183fc87 "memory: move mem_path handling to
memory_region_allocate_system_memory" disabled -mempath use for all
machines that do not use memory_region_allocate_system_memory() to
register RAM. Since SPAPR uses memory_region_init_ram(), the huge pages
support was disabled for it.
This replaces memory_region_init_ram()+vmstate_register_ram_global() with
memory_region_allocate_system_memory() to get huge pages back.
This changes RAM size from (ram_limit - rma_alloc_size) to ram_limit as
the previous patch moved RMA memory region allocation after RAM allocation
and therefore this change does not have immediate effect but simplifies
the code.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
PPC970 does not support VRMA (virtual RMA) so real memory required
for SLOF to execute must be allocated by the KVM_ALLOCATE_RMA ioctl.
Later this memory is used as a part of the guest RAM area.
The RMA allocating code also registers a memory region for this piece
of RAM.
We are going to simplify memory regions layout: RMA memory region
will be a subregion in the RAM memory region, both starting from zero.
This way we will not have to take care of start address alignment for
the piece of RAM next to the RMA.
This moves memory region business closer to the RAM memory region
creation/allocation code.
As this is a mechanical patch, no change in behaviour is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[agraf: fix compilation on non-kvm systems]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
