summaryrefslogtreecommitdiff
path: root/hw/s390x
AgeCommit message (Collapse)AuthorFilesLines
2013-05-03virtio-x-bus: force bus name to virtio-bus.KONRAD Frederic2-2/+7
When the proxy id is set, this bus takes the name "id.0" which is expected to be the virtio-device's first bus. So force this name to "virtio-bus" as it is an internal bus. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1367330931-12994-2-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-26virtio-rng-s390: add properties.KONRAD Frederic1-0/+8
I don't see any reason why these properties are missing. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Note: Need to apply virtio-rng-refactoring first! Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26S390: CCW: Use new, working firmware by defaultAlexander Graf1-1/+1
Since we now have working firmware for s390-ccw in the tree, we can default to it on our s390-ccw machine, rendering it more useful. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26S390: IPL: Use different firmware for different machinesAlexander Graf4-6/+11
We have a virtio-s390 and a virtio-ccw machine in QEMU. Both use vastly different ways to do I/O. Having the same firmware blob for both doesn't really make any sense. Instead, let's parametrize the firmware file name, so that we can have different blobs for different machines. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26S390: IPL: Support ELF firmwareAlexander Graf1-6/+10
Our firmware blob is always a raw file that we load at a fixed address today. Support loading an ELF blob instead that we can map high up in memory. This way we don't have to be so conscious about size constraints. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26S390: Make IPL reset address dynamicAlexander Graf1-11/+11
We can have different load addresses for different blobs we boot with. Make the reset IP dynamic, so that we can handle things more flexibly. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26virtio: Fix compilation without CONFIG_VHOST_SCSIEd Maste3-0/+6
Signed-off-by: Ed Maste <emaste@freebsd.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-25virtio-ccw: Check indicators location.Cornelia Huck1-0/+6
If a guest neglected to register (secondary) indicators but still runs with notifications enabled, we might end up writing to guest zero; avoid this by checking for valid indicators and only writing to the guest and generating an interrupt if indicators have been setup. Cc: qemu-stable@nongnu.org Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-04-24virtio: remove virtiobindings.KONRAD Frederic2-16/+0
This remove virtio-bindings, and use class instead. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1366791683-5350-6-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-24virtio: remove the function pointer.KONRAD Frederic2-13/+10
This remove the function pointer in VirtIODevice, and use only VirtioDeviceClass function pointer. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1366791683-5350-5-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-24virtio-bus: make virtio_x_bus_new static.KONRAD Frederic4-6/+6
virtio_x_bus_new are only used in file scope. So this make them static. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1366791683-5350-3-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-24virtio-rng-ccw: switch to the new API.KONRAD Frederic2-28/+32
Here the virtio-rng-ccw is modified for the new API. The device virtio-rng-pci extends virtio-pci. It creates and connects a virtio-rng-device during the init. The properties are not changed. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Amit Shah <amit.shah@redhat.com> Message-id: 1366790881-3026-6-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-24virtio-rng-s390: switch to the new API.KONRAD Frederic2-17/+34
Here the virtio-rng-s390 is modified for the new API. The device virtio-rng-s390 extends virtio-s390-device as before. It creates and connects a virtio-rng during the init. The properties are not modified. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Amit Shah <amit.shah@redhat.com> Message-id: 1366790881-3026-5-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-24virtio-rng: add virtio-rng device.KONRAD Frederic1-2/+1
Create virtio-rng-device which extends virtio-device, so it can be connected on virtio-bus. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Amit Shah <amit.shah@redhat.com> Message-id: 1366790881-3026-3-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-19vhost-scsi-s390: new device supporting the tcm_vhost Linux kernel modulePaolo Bonzini2-0/+65
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Asias He <asias@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-19vhost-scsi-ccw: new device supporting the tcm_vhost Linux kernel modulePaolo Bonzini2-0/+65
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-19virtio-scsi: create VirtIOSCSICommonPaolo Bonzini2-2/+2
This patch refactors existing virtio-scsi code into VirtIOSCSICommon in order to allow virtio_scsi_init_common() to be used by both internal virtio_scsi_init() and external vhost-scsi-pci code. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Asias He <asias@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-17virtio-net-ccw: switch to the new API.KONRAD Frederic2-16/+28
Here the virtio-net-ccw is modified for the new API. The device virtio-net-ccw extends virtio-ccw-device as before. It creates and connects a virtio-net-device during the init. The properties are not modified. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1365690602-22729-6-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17virtio-net-s390: switch to the new API.KONRAD Frederic2-12/+30
Here the virtio-net-s390 is modified for the new API. The device virtio-net-s390 extends virtio-s390-device as before. It creates and connects a virtio-net-device during the init. The properties are not modified. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1365690602-22729-5-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17virtio-net: add the virtio-net device.KONRAD Frederic2-10/+2
Create virtio-net-device which extends virtio-device, so it can be connected on virtio-bus. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1365690602-22729-3-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-15virtio-balloon: fix dynamic properties.KONRAD Frederic1-0/+34
To keep compatibility with the old virtio-balloon-x, add the dynamic properties to virtio-balloon-pci and virtio-balloon-ccw. Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1365941220-8114-1-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-15virtio-serial-ccw: switch to the new API.KONRAD Frederic2-13/+27
Here the virtio-serial-ccw is modified for the new API. The device virtio-serial-ccw extends virtio-ccw-device as before. It creates and connects a virtio-serial during the init. The properties are not modified. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Amit Shah <amit.shah@redhat.com> Message-id: 1365512016-21944-5-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-15virtio-serial-s390: switch to the new API.KONRAD Frederic2-11/+31
Here the virtio-serial-s390 is modified for the new API. The device virtio-serial-s390 extends virtio-s390-device as before. It creates and connects a virtio-serial during the init. The properties are not modified. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Amit Shah <amit.shah@redhat.com> Message-id: 1365512016-21944-4-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-15virtio-serial: add the virtio-serial device.KONRAD Frederic2-4/+2
Create virtio-serial which extends virtio-device, so it can be connected on virtio-bus. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Amit Shah <amit.shah@redhat.com> Message-id: 1365512016-21944-2-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-12Typo, spelling and grammatical fixesPeter Maydell2-2/+2
Minor fixes to documentation and code comments. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-08hw: move char devices to hw/char/, configure via default-configs/Paolo Bonzini2-306/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move headers to include/Paolo Bonzini7-237/+23
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-28virtio-balloon-ccw: switch to the new API.KONRAD Frederic2-11/+25
Here the virtio-balloon-ccw is modified for the new API. The device virtio-balloon-ccw extends virtio-ccw-device as before. It creates and connects a virtio-balloon during the init. The properties are not modified. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1364377755-15508-4-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-26virtio-ccw: Queue sanity check for notify hypercall.Cornelia Huck1-0/+3
Verify that the virtio-ccw notify hypercall passed a reasonable value for queue. Cc: qemu-stable@nongnu.org Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-03-26virtio-scsi-ccw: switch to new APIKONRAD Frederic2-13/+26
Here the virtio-scsi-ccw is modified for the new API. The device virtio-scsi-ccw extends virtio-ccw-device as before. It creates and connects a virtio-scsi during the init. The properties are not modified. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1363875320-7985-8-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-26virtio-scsi-s390: switch to the new API.KONRAD Frederic2-9/+27
Here the virtio-scsi-s390 is modified for the new API. The device virtio-scsi-s390 extends virtio-s390-device as before. It creates and connects a virtio-scsi during the init. The properties are not modified. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1363875320-7985-7-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-26virtio-scsi: moving host_features from properties to transport properties.KONRAD Frederic2-2/+4
host_features field is part of the transport device. So move all the host_features related properties into transport device. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1363875320-7985-4-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-20virtio-ccw, s390-virtio: Use generic virtio-blk macro.Cornelia Huck2-14/+2
Now that virtio-ccw and s390-virtio define all common properties for virtio-blk, we can switch to using the generic DEFINE_VIRTIO_BLK_PROPERTIES macro. CC: Alexander Graf <agraf@suse.de> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-03-20s390-virtio, virtio-ccw: Add config_wce for virtio-blk.Cornelia Huck2-0/+2
There's no reason why we wouldn't want to make the cache mode configurable. Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-03-20virtio-ccw: Add missing blk chs properties.Cornelia Huck1-0/+1
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-03-18virtio-blk-ccw switch to new API.KONRAD Frederic2-16/+31
Here the virtio-ccw-s390 is modified for the new API. The device virtio-ccw-s390 extends virtio-ccw-device as before. It creates and connects a virtio-ccw during the init. The properties are not modified. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1363624648-16906-9-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-18virtio-blk-s390: switch to the new API.KONRAD Frederic2-12/+31
Here the virtio-blk-s390 is modified for the new API. The device virtio-blk-s390 extends virtio-s390-device as before. It creates and connects a virtio-blk during the init. The properties are not modified. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1363624648-16906-8-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-18virtio-x-bus: fix allow_hotplug assertion.KONRAD Frederic2-2/+2
This set allow_hotplug for each existing virtio-x-bus, allowing the refactored devices to be hot pluggable. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1363624648-16906-3-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-15Merge remote-tracking branch 'cohuck/virtio-ccw-upstr' into stagingAnthony Liguori2-1/+62
# By Christian Borntraeger (1) and Cornelia Huck (1) # Via Cornelia Huck * cohuck/virtio-ccw-upstr: virtio-ccw: Wire up virtio-rng. virtio-ccw: remove qdev_unparent in unplug routing
2013-03-12virtio-ccw: Wire up virtio-rng.Cornelia Huck2-0/+62
Make virtio-rng devices available for s390-ccw-virtio machines. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-03-12virtio-ccw: remove qdev_unparent in unplug routingChristian Borntraeger1-1/+0
This patch fixes unplugging a virtio-ccw device. We no longer need to do that in virtio-ccw since common code does now proper handling. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-03-12cpu: Move halted and interrupt_request fields to CPUStateAndreas Färber1-5/+9
Both fields are used in VMState, thus need to be moved together. Explicitly zero them on reset since they were located before breakpoints. Pass PowerPCCPU to kvmppc_handle_halt(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-10Merge remote-tracking branch 'origin/master' into stagingAnthony Liguori3-5/+8
* origin/master: (75 commits) tcg: Don't make exitreq flag a local temporary Makefile: Add subdir dependency on config-devices-all.mak make_device_config.sh: Emit dependency file to directory where included Revert "make_device_config.sh: Fix target path in generated dependency file" s390/virtio-ccw: remove redundant call to blockdev_mark_auto_del s390/css: Fix subchannel detection Allow virtio-net features for legacy s390 virtio bus s390: virtio-ccw maintainer s390: simplify kvm cpu init pseries: Add compatible property to root of device tree target-ppc: Move CPU aliases out of translate_init.c target-ppc: Report CPU aliases for QMP target-ppc: List alias names alongside CPU models target-ppc: Make host CPU a subclass of the host's CPU model PPC: xnu kernel expects FLUSH to be cleared on STOP PPC: Fix dma interrupt target-ppc: Fix PPC_DUMP_SPR_ACCESS build target-ppc: Synchronize FPU state with KVM target-ppc: Add mechanism for synchronizing SPRs with KVM Save memory allocation in the elf loader ...
2013-03-08s390/virtio-ccw: remove redundant call to blockdev_mark_auto_delChristian Borntraeger1-1/+0
blockdev_mark_auto_del is already called in virtio-blk-exit. Remove the redundant call. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-08s390/css: Fix subchannel detectionChristian Borntraeger1-4/+7
We have to consider the m bit to find the real channel subsystem when determining the last subchannel. If we fail to take this into account, removal of a subchannel in the middle of a big list of devices will stop device detection after a reboot. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-08Allow virtio-net features for legacy s390 virtio busChristian Borntraeger1-0/+1
Enable all virtio-net features for the legacy s390 virtio bus. This also fixes kernel BUG at /usr/src/packages/BUILD/kernel-default-3.0.58/linux-3.0/drivers/s390/kvm/kvm_virtio.c:121! Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-01hw: include hw header files with full pathsPaolo Bonzini5-8/+8
Done with this script: cd hw for i in `find . -name '*.h' | sed 's/^..//'`; do echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,' done | sed -i -f - `find . -type f` This is so that paths remain valid as files are moved. Instead, files in hw/dataplane are referenced with the relative path. We know they are not going to move to include/, and they are the only include files that are in subdirectories _and_ move. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move qdev-monitor.o to toplevel directoryPaolo Bonzini1-0/+1
qdev-monitor.c is the only "core qdev" file that is not used in user-mode emulation, and it does not define anything that is used by hardware models. Remove it from the hw/ directory and remove hw/qdev-monitor.h from hw/qdev.h too; this requires some files to have some new explicitly includes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-13s390: Fix handling of iscs.Cornelia Huck1-2/+2
There are two ways to express an interruption subclass: - As a bitmask, as used in cr6. - As a number, as used in the I/O interruption word. Unfortunately, we have treated to I/O interruption word as if it contained the bitmask as well, which went unnoticed so far as - (queued-for-next) kvm made the same mistake, and - Linux guest kernels don't check the isc value in the I/O interruption word for subchannel interrupts. Make sure that we treat the I/O interruption word correctly. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-02-13s390/sclpconsole: prevent char layer callback during initializationChristian Borntraeger1-4/+1
Starting a qemu with an sclp console and pressing a key very early can result in "qemu-system-s390x: hw/s390x/sclpconsole.c:60: receive_from_chr_layer: Assertion `scon->iov' failed." Lets make sure that the init process is finished, since the iov is allocated after CHR_EVENT_OPENED by also checking for scon->iov. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-29 01:26:13 +0000