summaryrefslogtreecommitdiff
path: root/hw/usb-msd.c
AgeCommit message (Collapse)AuthorFilesLines
2011-02-01Add bootindex handling into usb storage device.Gleb Natapov1-0/+2
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-01-31blockdev: Fix drive_add for drives without mediaMarkus Armbruster1-2/+1
Watch this: (qemu) drive_add 0 if=none (qemu) info block none0: type=hd removable=0 [not inserted] (qemu) drive_del none0 Segmentation fault (core dumped) add_init_drive() is confused about drive_init()'s failure modes, and cleans up when it shouldn't. This leaves the DriveInfo with member opts dangling. drive_del attempts to free it, and dies. drive_init() behaves as follows: * If it created a drive with media, it returns its DriveInfo. * If it created a drive without media, it clears *fatal_error and returns NULL. * If it couldn't create a drive, it sets *fatal_error and returns NULL. Of its three callers: * drive_init_func() is correct. * usb_msd_init() assumes drive_init() failed when it returns NULL. This is correct only because it always passes option "file", and "drive without media" can't happen then. * add_init_drive() assumes drive_init() failed when it returns NULL. This is incorrect. Clean up drive_init() to return NULL on failure and only on failure. Drop its parameter fatal_error. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24usb-msd: Propagate removable bit to SCSI deviceStefan Hajnoczi1-1/+3
USB Mass Storage Devices sometimes have the RMB (removable) bit set in the SCSI INQUIRY response. Thumbdrives tend to have the bit set whereas hard disks do not. Operating systems differentiate between removable devices and fixed devices. Under Linux, the anaconda installer looks for removable devices. Under Windows, only fixed devices may have more than one partition and AutoRun is also affected by the removable bit. For these reasons, allow USB Mass Storage Devices to override the removable bit: qemu -usb -drive if=none,file=test.img,cache=none,id=disk0 -device usb-storage,drive=disk0,removable=on The default is off. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24scsi: Allow scsi_bus_legacy_add_drive() to set removable bitStefan Hajnoczi1-1/+1
scsi-disk devices may wish to override the removable bit. Add support for a qdev property on SCSI devices. This is will be used by usb-msd. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-11usb storage: handle long responsesGerd Hoffmann1-2/+2
The scsi layer may return us more data than the guests wants to have. Handle this by just ignoring the extra bytes and calling the {read,write}_data callback to finish the request. Seen happening in real life with some extended inquiry command. With this patch applied the linux kernel stops reseting the device once at boot. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb storage: fix status reportingGerd Hoffmann1-6/+7
Change usb_msd_send_status() to take a pointer to the status packet instead of writing the status to s->usb_buf which might not point to the correct location. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb storage: high speed supportGerd Hoffmann1-5/+46
Add high speed support to the usb mass storage device. With this patch applied the linux kernel recognises the usb storage device as highspeed capable device and suggests to connect it to a highspeed port instead of the uhci. Tested with both uhci and (not-yet submitted) ehci. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb: move remote wakeup handling to common codeGerd Hoffmann1-23/+0
This patch moves setting and clearing the remote_wakeup feature bit (via USB_REQ_{SET,CLEAR}_FEATURE) to common code. Also USB_REQ_GET_STATUS handling is moved to common code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb: move USB_REQ_{GET,SET}_CONFIGURATION handling to common codeGerd Hoffmann1-8/+1
This patch adds fields to the USBDevice struct for the current speed (hard-wired to full speed for now) and current device configuration. Also a init function is added which inializes these fields. This allows USB_REQ_{GET,SET}_CONFIGURATION handling to be moved to common code. For most drivers the conversion is trivial ad they support a single configuration only anyway. One exception is bluetooth where some device-specific setup code runs after get/set configuration. The other is usb-net which actually has two configurations so the the code to check for the active configuration has been adapted. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb: move USB_REQ_SET_ADDRESS handling to common codeGerd Hoffmann1-4/+0
USB_REQ_SET_ADDRESS handling is identical in *all* emulated devices. Move it to common code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb storage: serial number supportGerd Hoffmann1-0/+6
If a serial number is present for the drive fill it into the usb serialnumber string descriptor. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb storage: use new descriptor infrastructure.Gerd Hoffmann1-104/+63
Switch the usb storage driver over to the new descriptor infrastructure. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-08-24Rearrange block headersBlue Swirl1-0/+1
Changing block.h or blockdev.h resulted in recompiling most objects. Move DriveInfo typedef and BlockInterfaceType enum definitions to qemu-common.h and rearrange blockdev.h use to decrease churn. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-22QemuOpts: make most qemu_*_opts staticGerd Hoffmann1-1/+1
Switch tree to lookup-by-name using qemu_find_opts(). Also hook up virtfs options so qemu_find_opts works for them too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-02block: Catch attempt to attach multiple devices to a blockdevMarkus Armbruster1-4/+8
For instance, -device scsi-disk,drive=foo -device scsi-disk,drive=foo happily creates two SCSI disks connected to the same block device. It's all downhill from there. Device usb-storage deliberately attaches twice to the same blockdev, which fails with the fix in place. Detach before the second attach there. Also catch attempt to delete while a guest device model is attached. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02qdev: Decouple qdev_prop_drive from DriveInfoMarkus Armbruster1-8/+7
Make the property point to BlockDriverState, cutting out the DriveInfo middleman. This prepares the ground for block devices that don't have a DriveInfo. Currently all user-defined ones have a DriveInfo, because the only way to define one is -drive & friends (they go through drive_init()). DriveInfo is closely tied to -drive, and like -drive, it mixes information about host and guest part of the block device. I'm working towards a new way to define block devices, with clean host/guest separation, and I need to get DriveInfo out of the way for that. Fortunately, the device models are perfectly happy with BlockDriverState, except for two places: ide_drive_initfn() and scsi_disk_initfn() need to check the DriveInfo for a serial number set with legacy -drive serial=... Use drive_get_by_blockdev() there. Device model code should now use DriveInfo only when explicitly dealing with drives defined the old way, i.e. without -device. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02blockdev: Clean up automatic drive deletionMarkus Armbruster1-4/+16
We automatically delete blockdev host parts on unplug of the guest device. Too much magic, but we can't change that now. The delete happens early in the guest device teardown, before the connection to the host part is severed. Thus, the guest part's pointer to the host part dangles for a brief time. No actual harm comes from this, but we'll catch such dangling pointers a few commits down the road. Clean up the dangling pointers by delaying the automatic deletion until the guest part's pointer is gone. Device usb-storage deliberately makes two qdev properties refer to the same drive, because it automatically creates a second device. Again, too much magic we can't change now. Multiple references worked okay before, but now free_drive() dies for the second one. Zap the extra reference. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02scsi: scsi_bus_legacy_handle_cmdline() can fail, fix callersMarkus Armbruster1-0/+3
None of its callers checks for failure. scsi_hot_add() can crash because of that: (qemu) drive_add 4 if=scsi,format=host_device,file=/dev/sg1 scsi-generic: scsi generic interface too old Segmentation fault (core dumped) Fix all callers, not just scsi_hot_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04blockdev: Collect block device code in new blockdev.cMarkus Armbruster1-1/+1
Anything that moves hundreds of lines out of vl.c can't be all bad. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04blockdev: Hide QEMUMachine from drive_init()Markus Armbruster1-1/+1
To pave the way for moving it out of vl.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-03-31usb: class specific interface requestsMax Reitz1-4/+2
Mass Storage Reset and Get Max LUN are class specific requests, but they were not marked as such in hw/usb-msd.c, moved therefore ClassInterfaceRequest and ClassInterfaceOutRequest from hw/usb-net.c to hw/usb.h. Furthermore there was a problem in hw/usb-ohci.c when using DEBUG concerning systems where size_t is a 32 bit integer (printf resulted in a segmentation fault). Signed-off-by: Max Reitz <max@tyndur.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17hw/usb-msd: fix some usb requestsArnaud Patard (Rtp)1-3/+5
The usb-msd device emulation needs some small tweaks in the requests emulations. For instance, the reset/maxlun requests are class/interface specific so requests for them with the type class and recipient interface bits sets have to be handled. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-16error: Replace qemu_error() by error_report()Markus Armbruster1-1/+1
error_report() terminates the message with a newline. Strip it it from its arguments. This fixes a few error messages lacking a newline: net_handle_fd_param()'s "No file descriptor named %s found", and tap_open()'s "vnet_hdr=1 requested, but no kernel support for IFF_VNET_HDR available" (all three versions). There's one place that passes arguments without newlines intentionally: load_vmstate(). Fix it up.
2010-03-16block: Simplify usb_msd_initfn() test for "can read bdrv key"Markus Armbruster1-1/+1
The old test assumes that "hotplugged" implies "we have a current monitor for reading the key". This is in fact true, but it's not obviously true. Aside: if it were false, we could pass a null pointer to monitor_read_bdrv_key_start(), which would then crash. The previous commit permits us to check for "we have a current monitor" directly, so do that.
2010-02-25Fix -usbdevice crashPaul Brook1-0/+3
If -usbdevice is used on a machine with no USB busses, usb_create will fail and return NULL. Patch below handles this failure gracefully rather than crashing when we try to init the device. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-02-10block: add topology qdev propertiesChristoph Hellwig1-6/+6
Add three new qdev properties to export block topology information to the guest. This is needed to get optimal I/O alignment for RAID arrays or SSDs. The options are: - physical_block_size to specify the physical block size of the device, this is going to increase from 512 bytes to 4096 kilobytes for many modern storage devices - min_io_size to specify the minimal I/O size without performance impact, this is typically set to the RAID chunk size for arrays. - opt_io_size to specify the optimal sustained I/O size, this is typically the RAID stripe width for arrays. I decided to not auto-probe these values from blkid which might easily be possible as I don't know how to deal with these issues on migration. Note that we specificly only set the physical_block_size, and not the logial one which is the unit all I/O is described in. The reason for that is that IDE does not support increasing the logical block size and at last for now I want to stick to one meachnisms in queue and allow for easy switching of transports for a given backing image which would not be possible if scsi and virtio use real 4k sectors, while ide only uses the physical block exponent. To make this more common for the different block drivers introduce a new BlockConf structure holding all common block properties and a DEFINE_BLOCK_PROPERTIES macro to add them all together, mirroring what is done for network drivers. Also switch over all block drivers to use it, except for the floppy driver which has weird driveA/driveB properties and probably won't require any advanced block options ever. Example usage for a virtio device with 4k physical block size and 8k optimal I/O size: -drive file=scratch.img,media=disk,cache=none,id=scratch \ -device virtio-blk-pci,drive=scratch,physical_block_size=4096,opt_io_size=8192 aliguori: updated patch to take into account BLOCK events Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12qdev: Replace device names containing whitespaceMarkus Armbruster1-3/+2
Device names with whitespace require quoting in the shell and in the monitor. Some of the offenders are also overly long. Some have a more convenient alias, some don't. The place for verbose device names is DeviceInfo member desc. The name should be short & sweet. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12qdev: Separate USB product description from qdev nameMarkus Armbruster1-0/+1
Using the qdev name for the product description makes for inconvenient qdev names. Put the product description in new USBDeviceInfo member product_desc. Make usb_qdev_init() use it. No user or guest visible change, since the value is still the same. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09scsi: move scsi-disk.h -> scsi.hGerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30usb-storage: use qdev for -usbdeviceGerd Hoffmann1-8/+25
Hook up usb_msd_init. Also rework handling of encrypted block devices, move the code out vl.c. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07Check return value of qdev_init()Markus Armbruster1-1/+2
But do so only where it may actually fail. Leave the rest for the next commit. Patchworks-ID: 35167 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05drive cleanup fixes.Gerd Hoffmann1-8/+0
Changes: * drive_uninit() wants a DriveInfo now. * drive_uninit() also calls bdrv_delete(), so callers don't need to do that. * drive_uninit() calls are moved over to the ->exit() callbacks, destroy_bdrvs() is zapped. * setting bdrv->private is not needed any more as the only user (destroy_bdrvs) is gone. * usb-storage needs no drive_uninit, scsi-disk will handle that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05scsi: hotplug windupGerd Hoffmann1-0/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05usb: hook unplug into qdev, cleanups + fixes.Gerd Hoffmann1-2/+0
Hook into DeviceInfo->exit(). handle_destroy() must not free the state struct, this is handled by the new usb_qdev_exit() function now. qdev_free(usb_device) works now. Fix usb hub to qdev_free() all connected devices on unplug. Unplugging a usb hub works now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05switch scsi bus to inplace allocation.Gerd Hoffmann1-3/+3
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/scsi+usb: convert usb-storage to qdev.Gerd Hoffmann1-27/+40
Full coverage with properties and everything. You can add virtual usb sticks this way now: -drive if=none,id=pendrive,path=/some/where -device usb-storage,drive=pendrive -usbdevice disk:/path/to/image continues to work. Other side effects: usb storage is listed in 'info block' now. kvm tree should be able to boot from usb via extboot (untested though). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/scsi: add scsi bus support to qdev, convert drivers.Gerd Hoffmann1-11/+15
* Add SCSIBus. * Add SCSIDeviceInfo, move device callbacks here. * add qdev/scsi helper functions. * convert drivers. Adding scsi disks via -device works now, i.e. you can do: -drive id=sda,if=none,... -device lsi -device scsi-disk,drive=sda legacy command lines (-drive if=scsi,...) continue to work. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/usb: add usb bus support to qdev, convert drivers.Gerd Hoffmann1-15/+30
* Add USBBus. * Add USBDeviceInfo, move device callbacks here. * Add usb-qdev helper functions. * Switch drivers to qdev. TODO: * make the rest of qemu aware of usb busses and kill the FIXMEs added by this patch. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-13Replace gcc variadic macro extension with C99 versionBlue Swirl1-3/+3
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-03-05monitor: Rework modal password input (Jan Kiszka)aliguori1-2/+8
Currently, waiting for the user to type in some password blocks the whole VM because monitor_readline starts its own I/O loop. And this loop also screws up reading passwords from virtual console. Patch below fixes the shortcomings by using normal I/O processing also for waiting on a password. To keep to modal property for the monitor terminal, the command handler is temporarily replaced by a password handler and a callback infrastructure is established to process the result before switching back to command mode. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6710 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Rework early disk password inquiry (Jan Kiszka)aliguori1-3/+3
Reading the passwords for encrypted hard disks during early startup is broken (I guess for quiet a while now): - No monitor terminal is ready for input at this point - Forcing all mux'ed terminals into monitor mode can confuse other users of that channels To overcome these issues and to lay the ground for a clean decoupling of monitor terminals, this patch changes the initial password inquiry as follows: - Prevent autostart if there is some encrypted disk - Once the user tries to resume the VM, prompt for all missing passwords - Only resume if all passwords were accepted Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6707 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05hw: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori1-2/+0
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2008-08-21Add image format option for USB mass-storage devicesaurel321-1/+30
(fix CVE-2008-1945) Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5059 c046a42c-6fe2-441c-8c8c-71466251a162
2007-12-10SCSI cleanup, by Laurent Vivier.ths1-8/+8
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3797 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook1-1/+4
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-17find -type f | xargs sed -i 's/[\t ]*$//g' # Yes, again. Note the star in ↵ths1-2/+2
the regex. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3177 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16find -type f | xargs sed -i 's/[\t ]$//g' # on most filesths1-6/+6
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-04-30Remove repeated code and enable encrypted SD cards and USB sticks images.balrog1-0/+2
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2750 c046a42c-6fe2-441c-8c8c-71466251a162
2007-03-31Fix usb hid and mass-storage protocol revision, by Juergen Keil.ths1-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2558 c046a42c-6fe2-441c-8c8c-71466251a162
2006-08-29SCSI TCQ support.pbrook1-57/+156
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2139 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-24 09:08:09 +0000