| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A recent patch fixed leaks of the dynamically allocated vcdev->vdev.name
field in vfio_ccw_realize(), but we now have three freeing sites for it.
This is unfortunate and seems to indicate something is wrong with its
life cycle.
The root issue is that vcdev->vdev.name is set before vfio_get_device()
is called, which theoretically prevents to call vfio_put_device() to
do the freeing. Well actually, we could call it anyway because
vfio_put_base_device() is a nop if the device isn't attached, but this
would be confusing.
This patch hence moves all the logic of attaching the device, including
the "already attached" check, to a separate vfio_ccw_get_device() function,
counterpart of vfio_put_device(). While here, vfio_put_device() is renamed
to vfio_ccw_put_device() for consistency.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <152326891065.266543.9487977590811413472.stgit@bahia.lan>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
During guest OS reboot, guest framebuffer is invalid. It will cause
bugs, if the invalid guest framebuffer is still used by host.
This patch is to introduce vfio_display_reset which is invoked
during vfio display reset. This vfio_display_reset function is used
to release the invalid display resource, disable scanout mode and
replace the invalid surface with QemuConsole's DisplaySurafce.
This patch can fix the GPU hang issue caused by gd_egl_draw during
guest OS reboot.
Changes v3->v4:
- Move dma-buf based display check into the vfio_display_reset().
(Gerd)
Changes v2->v3:
- Limit vfio_display_reset to dma-buf based vfio display. (Gerd)
Changes v1->v2:
- Use dpy_gfx_update_full() update screen after reset. (Gerd)
- Remove dpy_gfx_switch_surface(). (Gerd)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Message-id: 1524820266-27079-3-git-send-email-tina.zhang@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
If the subchannel is already attached or if vfio_get_device() fails, the
code jumps to the 'out_device_err' label and doesn't free the string it
has just allocated.
The code should be reworked so that vcdev->vdev.name only gets set when
the device has been attached, and freed when it is about to be detached.
This could be achieved with the addition of a vfio_ccw_get_device()
function that would be the counterpart of vfio_put_device(). But this is
a more elaborate cleanup that should be done in a follow-up. For now,
let's just add calls to g_free() on the buggy error paths.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <152311222681.203086.8874800175539040298.stgit@bahia>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Commit 567b5b309abe ("vfio/pci: Relax DMA map errors for MMIO regions")
added an error message if a passed memory section address or size
is not aligned to the page size and thus cannot be DMA mapped.
This patch fixes the trace by printing the region name and the
memory region section offset within the address space (instead of
offset_within_region).
We also turn the error_report into a trace event. Indeed, In some
cases, the traces can be confusing to non expert end-users and
let think the use case does not work (whereas it works as before).
This is the case where a BAR is successively mapped at different
GPAs and its sections are not compatible with dma map. The listener
is called several times and traces are issued for each intermediate
mapping. The end-user cannot easily match those GPAs against the
final GPA output by lscpi. So let's keep those information to
informed users. In mid term, the plan is to advise the user about
BAR relocation relevance.
Fixes: 567b5b309abe ("vfio/pci: Relax DMA map errors for MMIO regions")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This adds a possibility for the platform to tell VFIO not to emulate MSIX
so MMIO memory regions do not get split into chunks in flatview and
the entire page can be registered as a KVM memory slot and make direct
MMIO access possible for the guest.
This enables the entire MSIX BAR mapping to the guest for the pseries
platform in order to achieve the maximum MMIO preformance for certain
devices.
Tested on:
LSI Logic / Symbios Logic SAS3008 PCI-Express Fusion-MPT SAS-3 (rev 02)
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
At the moment we unconditionally avoid mapping MSIX data of a BAR and
emulate MSIX table in QEMU. However it is 1) not always necessary as
a platform may provide a paravirt interface for MSIX configuration;
2) can affect the speed of MMIO access by emulating them in QEMU when
frequently accessed registers share same system page with MSIX data,
this is particularly a problem for systems with the page size bigger
than 4KB.
A new capability - VFIO_REGION_INFO_CAP_MSIX_MAPPABLE - has been added
to the kernel [1] which tells the userspace that mapping of the MSIX data
is possible now. This makes use of it so from now on QEMU tries mapping
the entire BAR as a whole and emulate MSIX on top of that.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a32295c612c57990d17fb0f41e7134394b2f35f6
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
At the moment if vfio_memory_listener is registered in the system memory
address space, it maps/unmaps every RAM memory region for DMA.
It expects system page size aligned memory sections so vfio_dma_map
would not fail and so far this has been the case. A mapping failure
would be fatal. A side effect of such behavior is that some MMIO pages
would not be mapped silently.
However we are going to change MSIX BAR handling so we will end having
non-aligned sections in vfio_memory_listener (more details is in
the next patch) and vfio_dma_map will exit QEMU.
In order to avoid fatal failures on what previously was not a failure and
was just silently ignored, this checks the section alignment to
the smallest supported IOMMU page size and prints an error if not aligned;
it also prints an error if vfio_dma_map failed despite the page size check.
Both errors are not fatal; only MMIO RAM regions are checked
(aka "RAM device" regions).
If the amount of errors printed is overwhelming, the MSIX relocation
could be used to avoid excessive error output.
This is unlikely to cause any behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: Fix Int128 bit ops]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Wire up dmabuf-based display.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Wire up region-based display.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed By: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Infrastructure for display support. Must be enabled
using 'display' property.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed By: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The license text currently specifies "any version" of the GPL. It
is unlikely that GPL v1 was ever intended; change this to the
standard "or any later version" text.
Cc: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Cc: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Cc: Pierre Morel <pmorel@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
basename(3) and dirname(3) modify their argument and may return
pointers to statically allocated memory which may be overwritten by
subsequent calls.
g_path_get_basename and g_path_get_dirname have no such issues, and
therefore more preferable.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <1519888086-4207-1-git-send-email-jusual@mail.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
virtio,vhost,pci,pc: features, fixes and cleanups
- new stats in virtio balloon
- virtio eventfd rework for boot speedup
- vhost memory rework for boot speedup
- fixes and cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 13 Feb 2018 16:29:55 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (22 commits)
virtio-balloon: include statistics of disk/file caches
acpi-test: update FADT
lpc: drop pcie host dependency
tests: acpi: fix FADT not being compared to reference table
hw/pci-bridge: fix pcie root port's IO hints capability
libvhost-user: Support across-memory-boundary access
libvhost-user: Fix resource leak
virtio-balloon: unref the memory region before continuing
pci: removed the is_express field since a uniform interface was inserted
virtio-blk: enable multiple vectors when using multiple I/O queues
pci/bus: let it has higher migration priority
pci-bridge/i82801b11: clear bridge registers on platform reset
vhost: Move log_dirty check
vhost: Merge and delete unused callbacks
vhost: Clean out old vhost_set_memory and friends
vhost: Regenerate region list from changed sections list
vhost: Merge sections added to temporary list
vhost: Simplify ring verification checks
vhost: Build temporary section list and deref after commit
virtio: improve virtio devices initialization time
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
|
|
according to Eduardo Habkost's commit fd3b02c889 all PCIEs now implement
INTERFACE_PCIE_DEVICE so we don't need is_express field anymore.
Devices that implements only INTERFACE_PCIE_DEVICE (is_express == 1)
or
devices that implements only INTERFACE_CONVENTIONAL_PCI_DEVICE (is_express == 0)
where not affected by the change.
The only devices that were affected are those that are hybrid and also
had (is_express == 1) - therefor only:
- hw/vfio/pci.c
- hw/usb/hcd-xhci.c
- hw/xen/xen_pt.c
For those 3 I made sure that QEMU_PCI_CAP_EXPRESS is on in instance_init()
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Yoni Bettan <ybettan@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
* socket option parsing fix (Daniel)
* SCSI fixes (Fam)
* Readline double-free fix (Greg)
* More HVF attribution fixes (Izik)
* WHPX (Windows Hypervisor Platform Extensions) support (Justin)
* POLLHUP handler (Klim)
* ivshmem fixes (Ladi)
* memfd memory backend (Marc-André)
* improved error message (Marcelo)
* Memory fixes (Peter Xu, Zhecheng)
* Remove obsolete code and comments (Peter M.)
* qdev API improvements (Philippe)
* Add CONFIG_I2C switch (Thomas)
# gpg: Signature made Wed 07 Feb 2018 15:24:08 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (47 commits)
Add the WHPX acceleration enlightenments
Introduce the WHPX impl
Add the WHPX vcpu API
Add the Windows Hypervisor Platform accelerator.
tests/test-filter-redirector: move close()
tests: use memfd in vhost-user-test
vhost-user-test: make read-guest-mem setup its own qemu
tests: keep compiling failing vhost-user tests
Add memfd based hostmem
memfd: add hugetlbsize argument
memfd: add hugetlb support
memfd: add error argument, instead of perror()
cpus: join thread when removing a vCPU
cpus: hvf: unregister thread with RCU
cpus: tcg: unregister thread with RCU, fix exiting of loop on unplug
cpus: dummy: unregister thread with RCU, exit loop on unplug
cpus: kvm: unregister thread with RCU
cpus: hax: register/unregister thread with RCU, exit loop on unplug
ivshmem: Disable irqfd on device reset
ivshmem: Improve MSI irqfd error handling
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# cpus.c
|
|
After next patch, listener unregister will need the container to be
alive. Let's move this unregister phase to be before unset container,
since that operation will free the backend container in kernel,
otherwise we'll get these after next patch:
qemu-system-x86_64: VFIO_UNMAP_DMA: -22
qemu-system-x86_64: vfio_dma_unmap(0x559bf53a4590, 0x0, 0xa0000) = -22 (Invalid argument)
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180122060244.29368-4-peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
These quirks are necessary for GeForce, but not for Quadro/GRID/Tesla
assignment. Leaving them enabled is fully functional and provides the
most compatibility, but due to the unique NVIDIA MSI ACK behavior[1],
it also introduces latency in re-triggering the MSI interrupt. This
overhead is typically negligible, but has been shown to adversely
affect some (very) high interrupt rate applications. This adds the
vfio-pci device option "x-no-geforce-quirks=" which can be set to
"on" to disable this additional overhead.
A follow-on optimization for GeForce might be to make use of an
ioeventfd to allow KVM to trigger an irqfd in the kernel vfio-pci
driver, avoiding the bounce through userspace to handle this device
write.
[1] Background: the NVIDIA driver has been observed to issue a write
to the MMIO mirror of PCI config space in BAR0 in order to allow the
MSI interrupt for the device to retrigger. Older reports indicated a
write of 0xff to the (read-only) MSI capability ID register, while
more recently a write of 0x0 is observed at config space offset 0x704,
non-architected, extended config space of the device (BAR0 offset
0x88704). Virtualization of this range is only required for GeForce.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
There is already @hostwin in vfio_listener_region_add() so there is no
point in having the other one.
Fixes: 2e4109de8e58 ("vfio/spapr: Create DMA window dynamically (SPAPR IOMMU v2)")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Add the initialization of the mutex protecting the interrupt list.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Recently proposed vfio-pci kernel changes (v4.16) remove the
restriction preventing userspace from mmap'ing PCI BARs in areas
overlapping the MSI-X vector table. This change is primarily intended
to benefit host platforms which make use of system page sizes larger
than the PCI spec recommendation for alignment of MSI-X data
structures (ie. not x86_64). In the case of POWER systems, the SPAPR
spec requires the VM to program MSI-X using hypercalls, rendering the
MSI-X vector table unused in the VM view of the device. However,
ARM64 platforms also support 64KB pages and rely on QEMU emulation of
MSI-X. Regardless of the kernel driver allowing mmaps overlapping
the MSI-X vector table, emulation of the MSI-X vector table also
prevents direct mapping of device MMIO spaces overlapping this page.
Thanks to the fact that PCI devices have a standard self discovery
mechanism, we can try to resolve this by relocating the MSI-X data
structures, either by creating a new PCI BAR or extending an existing
BAR and updating the MSI-X capability for the new location. There's
even a very slim chance that this could benefit devices which do not
adhere to the PCI spec alignment guidelines on x86_64 systems.
This new x-msix-relocation option accepts the following choices:
off: Disable MSI-X relocation, use native device config (default)
auto: Use a known good combination for the platform/device (none yet)
bar0..bar5: Specify the target BAR for MSI-X data structures
If compatible, the target BAR will either be created or extended and
the new portion will be used for MSI-X emulation.
The first obvious user question with this option is how to determine
whether a given platform and device might benefit from this option.
In most cases, the answer is that it won't, especially on x86_64.
Devices often dedicate an entire BAR to MSI-X and therefore no
performance sensitive registers overlap the MSI-X area. Take for
example:
# lspci -vvvs 0a:00.0
0a:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection
...
Region 0: Memory at db680000 (32-bit, non-prefetchable) [size=512K]
Region 3: Memory at db7f8000 (32-bit, non-prefetchable) [size=16K]
...
Capabilities: [70] MSI-X: Enable+ Count=10 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
This device uses the 16K bar3 for MSI-X with the vector table at
offset zero and the pending bits arrary at offset 8K, fully honoring
the PCI spec alignment guidance. The data sheet specifically refers
to this as an MSI-X BAR. This device would not see a benefit from
MSI-X relocation regardless of the platform, regardless of the page
size.
However, here's another example:
# lspci -vvvs 02:00.0
02:00.0 Serial Attached SCSI controller: xxxxxxxx
...
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at ef640000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at ef600000 (64-bit, non-prefetchable) [size=256K]
...
Capabilities: [c0] MSI-X: Enable+ Count=16 Masked-
Vector table: BAR=1 offset=0000e000
PBA: BAR=1 offset=0000f000
Here the MSI-X data structures are placed on separate 4K pages at the
end of a 64KB BAR. If our host page size is 4K, we're likely fine,
but at 64KB page size, MSI-X emulation at that location prevents the
entire BAR from being directly mapped into the VM address space.
Overlapping performance sensitive registers then starts to be a very
likely scenario on such a platform. At this point, the user could
enable tracing on vfio_region_read and vfio_region_write to determine
more conclusively if device accesses are being trapped through QEMU.
Upon finding a device and platform in need of MSI-X relocation, the
next problem is how to choose target PCI BAR to host the MSI-X data
structures. A few key rules to keep in mind for this selection
include:
* There are only 6 BAR slots, bar0..bar5
* 64-bit BARs occupy two BAR slots, 'lspci -vvv' lists the first slot
* PCI BARs are always a power of 2 in size, extending == doubling
* The maximum size of a 32-bit BAR is 2GB
* MSI-X data structures must reside in an MMIO BAR
Using these rules, we can evaluate each BAR of the second example
device above as follows:
bar0: I/O port BAR, incompatible with MSI-X tables
bar1: BAR could be extended, incurring another 64KB of MMIO
bar2: Unavailable, bar1 is 64-bit, this register is used by bar1
bar3: BAR could be extended, incurring another 256KB of MMIO
bar4: Unavailable, bar3 is 64bit, this register is used by bar3
bar5: Available, empty BAR, minimum additional MMIO
A secondary optimization we might wish to make in relocating MSI-X
is to minimize the additional MMIO required for the device, therefore
we might test the available choices in order of preference as bar5,
bar1, and finally bar3. The original proposal for this feature
included an 'auto' option which would choose bar5 in this case, but
various drivers have been found that make assumptions about the
properties of the "first" BAR or the size of BARs such that there
appears to be no foolproof automatic selection available, requiring
known good combinations to be sourced from users. This patch is
pre-enabled for an 'auto' selection making use of a validated lookup
table, but no entries are yet identified.
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The kernel provides similar emulation of PCI BAR register access to
QEMU, so up until now we've used that for things like BAR sizing and
storing the BAR address. However, if we intend to resize BARs or add
BARs that don't exist on the physical device, we need to switch to the
pure QEMU emulation of the BAR.
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Add one more layer to our stack of MemoryRegions, this base region
allows us to register BARs independently of the vfio region or to
extend the size of BARs which do map to a region. This will be
useful when we want hypervisor defined BARs or sections of BARs,
for purposes such as relocating MSI-X emulation. We therefore call
msix_init() based on this new base MemoryRegion, while the quirks,
which only modify regions still operate on those sub-MemoryRegions.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The fields were removed in the referenced commit, but the comment
still mentions them.
Fixes: 2fb9636ebf24 ("vfio-pci: Remove unused fields from VFIOMSIXInfo")
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
In order to enable TCE operations support in KVM, we have to inform
the KVM about VFIO groups being attached to specific LIOBNs. The KVM
already knows about VFIO groups, the only bit missing is which
in-kernel TCE table (the one with user visible TCEs) should update
the attached broups. There is an KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE
attribute of the VFIO KVM device which receives a groupfd/tablefd couple.
This uses a new memory_region_iommu_get_attr() helper to get the IOMMU fd
and calls KVM to establish the link.
As get_attr() is not implemented yet, this should cause no behavioural
change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
changes generated using the following Coccinelle patch:
@@
type DeviceParentClass;
DeviceParentClass *pc;
DeviceClass *dc;
identifier parent_fn;
identifier child_fn;
@@
(
+device_class_set_parent_realize(dc, child_fn, &pc->parent_fn);
-pc->parent_fn = dc->realize;
...
-dc->realize = child_fn;
|
+device_class_set_parent_unrealize(dc, child_fn, &pc->parent_fn);
-pc->parent_fn = dc->unrealize;
...
-dc->unrealize = child_fn;
|
+device_class_set_parent_reset(dc, child_fn, &pc->parent_fn);
-pc->parent_fn = dc->reset;
...
-dc->reset = child_fn;
)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180114020412.26160-4-f4bug@amsat.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Resolve conflicts around apb.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
When support for multiple mappings per a region were added, this was
left behind, let's finish and remove unused bits.
Fixes: db0da029a185 ("vfio: Generalize region support")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The vfio_iommu_spapr_tce driver advertises kernel's support for
v1 and v2 IOMMU support, however it is not always possible to use
the requested IOMMU type. For example, a pseries host platform does not
support dynamic DMA windows so v2 cannot initialize and QEMU fails to
start.
This adds a fallback to the v1 IOMMU if v2 cannot be used.
Fixes: 318f67ce1371 ("vfio: spapr: Add DMA memory preregistering (SPAPR IOMMU v2)")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The init of giommu_list and hostwin_list is missed during container
initialization.
Signed-off-by: Liu, Yi L <yi.l.liu@linux.intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Commit 8c37faa475f3 ("vfio-pci, ppc64/spapr: Reorder group-to-container
attaching") moved registration of groups with the vfio-kvm device from
vfio_get_group() to vfio_connect_container(), but it missed the case
where a group is attached to an existing container and takes an early
exit. Perhaps this is a less common case on ppc64/spapr, but on x86
(without viommu) all groups are connected to the same container and
thus only the first group gets registered with the vfio-kvm device.
This becomes a problem if we then hot-unplug the devices associated
with that first group and we end up with KVM being misinformed about
any vfio connections that might remain. Fix by including the call to
vfio_kvm_device_add_group() in this early exit path.
Fixes: 8c37faa475f3 ("vfio-pci, ppc64/spapr: Reorder group-to-container attaching")
Cc: qemu-stable@nongnu.org # qemu-2.10+
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The bus pointer in PCIDevice is basically redundant with QOM information.
It's always initialized to the qdev_get_parent_bus(), the only difference
is the type.
Therefore this patch eliminates the field, instead creating a pci_get_bus()
helper to do the type mangling to derive it conveniently from the QOM
Device object underneath.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
|
|
Simplify the error handling of the SSCH and RSCH handler avoiding
arbitrary and cryptic error codes being used to tell how the instruction
is supposed to end. Let the code detecting the condition tell how it's
to be handled in a less ambiguous way. It's best to handle SSCH and RSCH
in one go as the emulation of the two shares a lot of code.
For passthrough this change isn't pure refactoring, but changes the way
kernel reported EFAULT is handled. After clarifying the kernel interface
we decided that EFAULT shall be mapped to unit exception. Same goes for
unexpected error codes and absence of required ORB flags.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-4-pasic@linux.vnet.ibm.com>
Tested-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
[CH: cosmetic changes]
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of
TYPE_PCI_DEVICE, except:
1) The ones that already have INTERFACE_PCIE_DEVICE set:
* base-xhci
* e1000e
* nvme
* pvscsi
* vfio-pci
* virtio-pci
* vmxnet3
2) base-pci-bridge
Not all PCI bridges are Conventional PCI devices, so
INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes
that are actually Conventional PCI:
* dec-21154-p2p-bridge
* i82801b11-bridge
* pbm-bridge
* pci-bridge
The direct subtypes of base-pci-bridge not touched by this patch
are:
* xilinx-pcie-root: Already marked as PCIe-only.
* pcie-pci-bridge: Already marked as PCIe-only.
* pcie-port: all non-abstract subtypes of pcie-port are already
marked as PCIe-only devices.
3) megasas-base
Not all megasas devices are Conventional PCI devices, so the
interface names are added to the subclasses registered by
megasas_register_types(), according to information in the
megasas_devices[] array.
"megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add
INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas".
Acked-by: Alberto Garcia <berto@igalia.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The following devices support both PCI Express and Conventional
PCI, by including special code to handle the QEMU_PCI_CAP_EXPRESS
flag and/or conditional pcie_endpoint_cap_init() calls:
* vfio-pci (is_express=1, but legacy PCI handled by
vfio_populate_device())
* vmxnet3 (is_express=0, but PCIe handled by vmxnet3_realize())
* pvscsi (is_express=0, but PCIe handled by pvscsi_realize())
* virtio-pci (is_express=0, but PCIe handled by
virtio_pci_dc_realize(), and additional legacy PCI code at
virtio_pci_realize())
* base-xhci (is_express=1, but pcie_endpoint_cap_init() call
is conditional on pci_bus_is_express(dev->bus)
* Note that xhci does not clear QEMU_PCI_CAP_EXPRESS like the
other hybrid devices
Cc: Dmitry Fleytman <dmitry@daynix.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add missing categorizations for some s390x devices:
- zpci device -> misc
- 3270 -> display
- vfio-ccw -> misc
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
NVIDIA has defined a specification for creating GPUDirect "cliques",
where devices with the same clique ID support direct peer-to-peer DMA.
When running on bare-metal, tools like NVIDIA's p2pBandwidthLatencyTest
(part of cuda-samples) determine which GPUs can support peer-to-peer
based on chipset and topology. When running in a VM, these tools have
no visibility to the physical hardware support or topology. This
option allows the user to specify hints via a vendor defined
capability. For instance:
<qemu:commandline>
<qemu:arg value='-set'/>
<qemu:arg value='device.hostdev0.x-nv-gpudirect-clique=0'/>
<qemu:arg value='-set'/>
<qemu:arg value='device.hostdev1.x-nv-gpudirect-clique=1'/>
<qemu:arg value='-set'/>
<qemu:arg value='device.hostdev2.x-nv-gpudirect-clique=1'/>
</qemu:commandline>
This enables two cliques. The first is a singleton clique with ID 0,
for the first hostdev defined in the XML (note that since cliques
define peer-to-peer sets, singleton clique offer no benefit). The
subsequent two hostdevs are both added to clique ID 1, indicating
peer-to-peer is possible between these devices.
QEMU only provides validation that the clique ID is valid and applied
to an NVIDIA graphics device, any validation that the resulting
cliques are functional and valid is the user's responsibility. The
NVIDIA specification allows a 4-bit clique ID, thus valid values are
0-15.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
If the hypervisor needs to add purely virtual capabilties, give us a
hook through quirks to do that. Note that we determine the maximum
size for a capability based on the physical device, if we insert a
virtual capability, that can change. Therefore if maximum size is
smaller after added virt capabilities, use that.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
If vfio_add_std_cap() errors then going to out prepends irrelevant
errors for capabilities we haven't attempted to add as we unwind our
recursive stack. Just return error.
Fixes: 7ef165b9a8d9 ("vfio/pci: Pass an error object to vfio_add_capabilities")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The existing tries to round up the number of pages but @pages is always
calculated as the rounded up value minus one which makes ctz64() always
return 0 and have create.levels always set 1.
This removes wrong "-1" and allows having more than 1 levels. This becomes
handy for >128GB guests with standard 64K pages as this requires blocks
with zone order 9 and the popular limit of CONFIG_FORCE_MAX_ZONEORDER=9
means that only blocks up to order 8 are allowed.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
hw/vfio/pci.c:308:29: warning: Use of memory after it is freed
qemu_set_fd_handler(*pfd, NULL, NULL, vdev);
^~~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
free the data _after_ using it.
hw/vfio/platform.c:126:29: warning: Use of memory after it is freed
qemu_set_fd_handler(*pfd, NULL, NULL, NULL);
^~~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
base-device
Commit 7da624e2 ("vfio: Test realized when using VFIOGroup.device_list
iterator") introduced a pointer to the Object DeviceState in the VFIO
common base-device and skipped non-realized devices as we iterate
VFIOGroup.device_list. While it missed to initialize the pointer for
the vfio-ccw case. Let's fix it.
Fixes: 7da624e2 ("vfio: Test realized when using VFIOGroup.device_list
iterator")
Cc: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <20170718014926.44781-3-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
When allocating memory for the vfio_irq_info parameter of the
VFIO_DEVICE_GET_IRQ_INFO ioctl, we used the wrong size. Let's
fix it by using the right size.
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Jing Zhang <bjzhjing@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170718014926.44781-2-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
At the moment VFIO PCI device initialization works as follows:
vfio_realize
vfio_get_group
vfio_connect_container
register memory listeners (1)
update QEMU groups lists
vfio_kvm_device_add_group
Then (example for pseries) the machine reset hook triggers region_add()
for all regions where listeners from (1) are listening:
ppc_spapr_reset
spapr_phb_reset
spapr_tce_table_enable
memory_region_add_subregion
vfio_listener_region_add
vfio_spapr_create_window
This scheme works fine until we need to handle VFIO PCI device hotplug
and we want to enable PPC64/sPAPR in-kernel TCE acceleration on,
i.e. after PCI hotplug we need a place to call
ioctl(vfio_kvm_device_fd, KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE).
Since the ioctl needs a LIOBN fd (from sPAPRTCETable) and a IOMMU group fd
(from VFIOGroup), vfio_listener_region_add() seems to be the only place
for this ioctl().
However this only works during boot time because the machine reset
happens strictly after all devices are finalized. When hotplug happens,
vfio_listener_region_add() is called when a memory listener is registered
but when this happens:
1. new group is not added to the container->group_list yet;
2. VFIO KVM device is unaware of the new IOMMU group.
This moves bits around to have all necessary VFIO infrastructure
in place for both initial startup and hotplug cases.
[aw: ie, register vfio groups with kvm prior to memory listener
registration such that kvm-vfio pseudo device ioctls are available
during the region_add callback]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This defines new QOM object - IOMMUMemoryRegion - with MemoryRegion
as a parent.
This moves IOMMU-related fields from MR to IOMMU MR. However to avoid
dymanic QOM casting in fast path (address_space_translate, etc),
this adds an @is_iommu boolean flag to MR and provides new helper to
do simple cast to IOMMU MR - memory_region_get_iommu. The flag
is set in the instance init callback. This defines
memory_region_is_iommu as memory_region_get_iommu()!=NULL.
This switches MemoryRegion to IOMMUMemoryRegion in most places except
the ones where MemoryRegion may be an alias.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20170711035620.4232-2-aik@ozlabs.ru>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
