summaryrefslogtreecommitdiff
path: root/hw/virtio-serial-bus.c
AgeCommit message (Collapse)AuthorFilesLines
2011-02-24virtio-serial: kill VirtIOSerialDeviceGerd Hoffmann1-9/+6
VirtIOSerialDevice is like VirtIOSerialPort with just the first two fields, which makes it pretty pointless. Using VirtIOSerialPort directly works equally well and is less confusing. [Amit: - rebase - rename 'dev' to 'port' in function params in virtio-serial.h ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-04virtio-serial: Make sure virtqueue is ready before discarding dataAmit Shah1-0/+3
This can happen if a port gets unplugged before guest has chance to initialise vqs. Reported-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-01Merge remote branch 'amit/for-anthony' into stagingAnthony Liguori1-22/+101
2011-01-20virtio-serial: save/restore new fields in port structAmit Shah1-2/+40
The new fields that got added as part of not copying over the guest buffer to the host need to be saved/restored across migration. Do that and bump up the version number. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-01-20virtio-serial: Add support for flow controlAmit Shah1-11/+38
This commit lets apps signal an incomplete write. When that happens, stop sending out any more data to the app and wait for it to unthrottle the port. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-01-20virtio-serial: Don't copy over guest buffer to hostAmit Shah1-7/+8
When the guest writes something to a host, we copied over the entire buffer first into the host and then processed it. Do away with that, it could result in a malicious guest causing a DoS on the host. Reported-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-01-20virtio-serial: move out discard logic in a separate functionAmit Shah1-17/+30
Instead of combining flush logic into the discard case and not discard case, have one function doing discard case. This will help later when adding flow control logic to the do_flush_queued_data() function. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-01-12virtio-serial-bus: bump up control vq size to 32Amit Shah1-2/+8
The current default of 16 buffers for the control vq is too small. We can get more entries in there, for example when asking the guest to add max. allowed ports. Note: a more robust solution would involve some kind of event queueing in host to guarantee no event loss. Added a TODO to look into this later. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-08-22virtio-serial: Cleanup on device hot-unplugAmit Shah1-0/+17
Free malloc'ed memory, unregister from savevm and clean up virtio-common bits on device hot-unplug. This was found performing a migration after device hot-unplug. Reported-by: <lihuang@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-30virtio-serial: Check if more max_ports specified than we can handleAmit Shah1-1/+9
Currently virtio-serial supports a maximum of 31 ports. Specifying the 'max_ports' parameter to be > 31 on the cmd line causes badness. Ensure we initialise virtio-serial only if max_ports is within the supported range. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-13virtio-serial: Assert for virtio queue ready before virtqueue operationsAmit Shah1-0/+1
In addition to the previous fix for calling do_flush_queued_data() only when the virtqueue is ready, ensure do_flush_queued_data() gets a vq that's suitably initialised. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-13virtio-serial: Check if virtio queue is ready before consuming dataAmit Shah1-0/+3
If a virtio-serial port is removed before the guest comes up and initialises the virtqueues, qemu exits with the message Guest moved used index from 0 to 61440 This happens because we try to clear any pending buffers from the virtqueue. Ensure the virtqueue is initialised before calling any virtqueue operations. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06savevm: Add DeviceState paramAlex Williamson1-1/+1
When available, we'd like to be able to access the DeviceState when registering a savevm. For buses with a get_dev_path() function, this will allow us to create more unique savevm id strings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-30virtio-serial: Simplify virtio_serial_load()Markus Armbruster1-9/+3
For all i, ports_map[i] is used in and only in the i-th iteration. Replace the dynamic array by a scalar variable. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-01virtio-serial-bus: fix ports_map allocation on initAlon Levy1-1/+2
Fix for too small allocation to ports_map Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-03virtio-serial: Fix check for 'assert'; prevent NULL derefsAmit Shah1-1/+1
In the flush_queued_data() function, we expect port to be valid. Assert only for port and not port || discard. Reported-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-28virtio-serial: Implement flow control for individual portsAmit Shah1-6/+44
Individual ports can now signal to the virtio-serial core to stop sending data if the ports cannot immediately handle new data. When a port later unthrottles, any data queued up in the virtqueue are sent to the port. Disable throttling once a port is closed (and we discard all the unconsumed buffers in the vq). The guest kernel can reclaim the buffers when it receives the port close event or when a port is being removed. Ensure we free up the buffers before we send out any events to the guest. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-28virtio-serial: Discard data that guest sends us when ports aren't connectedAmit Shah1-37/+32
Before the earlier patch, we relied on incorrect virtio api usage to signal to the guest that a particular buffer wasn't consumed by the host. After fixing that, we now just discard the data the guest sends us while a host port is disconnected or doesn't have a handler registered for consuming data. This commit really doesn't change anything from the current behaviour, just makes the code slightly better by spinning off data handling to ports in another function. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-28virtio-serial: Apps should consume all data that guest sends out / Fix ↵Amit Shah1-3/+3
virtio api abuse We cannot indicate to the guest how much data was consumed by an app for out_bufs. So we just have to assume the apps will consume all the data that are handed over to them. Fix the virtio api abuse in control_out() and handle_output(). Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-28virtio-serial: Handle scatter/gather input from the guestAmit Shah1-4/+8
Current guests don't send more than one iov but it can change later. Ensure we handle that case. Signed-off-by: Amit Shah <amit.shah@redhat.com> CC: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-28virtio-serial: Handle scatter-gather buffers for control messagesAmit Shah1-3/+28
Current control messages are small enough to not be split into multiple buffers but we could run into such a situation in the future or a malicious guest could cause such a situation. So handle the entire iov request for control messages. Also ensure the size of the control request is >= what we expect otherwise we risk accessing memory that we don't own. Signed-off-by: Amit Shah <amit.shah@redhat.com> CC: Avi Kivity <avi@redhat.com> Reported-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-28iov: Introduce a new file for helpers around iovs, add iov_from_buf()Amit Shah1-8/+7
The virtio-net code uses iov_fill() which fills an iov from a linear buffer. The virtio-serial-bus code does something similar in an open-coded function. Create a new iov.c file that has iov_from_buf(). Convert virtio-net and virtio-serial-bus over to use this functionality. virtio-net used ints to hold sizes, the new function is going to use size_t types. Later commits will add the opposite functionality -- going from an iov to a linear buffer. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-28virtio-serial: Send out guest data to ports only if port is openedAmit Shah1-0/+5
Data should be written only when ports are open. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-28virtio-serial: Propagate errors in initialising ports / devices in guestAmit Shah1-0/+10
If adding of ports or devices in the guest fails we can send out a QMP event so that management software can deal with it. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-28virtio-serial: Update copyright year to 2010Amit Shah1-1/+1
Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-28virtio-serial: Remove redundant check for 0-sized write requestAmit Shah1-3/+0
The check for a 0-sized write request to a guest port is not necessary; the while loop below won't be executed in this case and all will be fine. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-28virtio-serial: whitespace: match surrounding codeAmit Shah1-1/+4
The virtio-serial code doesn't mix declarations and definitions, so separate them out on different lines. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-28virtio-serial: Use control messages to notify guest of new portsAmit Shah1-63/+121
Allow the port 'id's to be set by a user on the command line. This is needed by management apps that will want a stable port numbering scheme for hot-plug/unplug and migration. Since the port numbers are shared with the guest (to identify ports in control messages), we just send a control message to the guest indicating addition of new ports (hot-plug) or notifying the guest of the available ports when the guest sends us a DEVICE_READY control message. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-28virtio-serial: save/load: Send target host connection status if differentAmit Shah1-0/+11
If the host connection to a port is closed on the destination machine after migration, whereas the connection was open on the source, the guest has to be informed of that. Similar for a host connection open on the destination. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-28virtio-serial: save/load: Ensure we have hot-plugged ports instantiatedAmit Shah1-0/+7
If some ports that were hot-plugged on the source are not available on the destination, fail migration instead of trying to deref a NULL pointer. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reported-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-28virtio-serial: save/load: Ensure nr_ports on src and dest are same.Amit Shah1-2/+16
The number of ports on the source as well as the destination machines should match. If they don't, it means some ports that got hotplugged on the source aren't instantiated on the destination. Or that ports that were hot-unplugged on the source are created on the destination. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reported-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-28virtio-serial: save/load: Ensure target has enough portsAmit Shah1-2/+11
The target could be started with max_nr_ports for a virtio-serial device lesser than what was available on the source machine. Fail the migration in such a case. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reported-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-16error: Replace qemu_error() by error_report()Markus Armbruster1-1/+1
error_report() terminates the message with a newline. Strip it it from its arguments. This fixes a few error messages lacking a newline: net_handle_fd_param()'s "No file descriptor named %s found", and tap_open()'s "vnet_hdr=1 requested, but no kernel support for IFF_VNET_HDR available" (all three versions). There's one place that passes arguments without newlines intentionally: load_vmstate(). Fix it up.
2010-02-19virtio-serial: don't set MULTIPORT for 1 port devMichael S. Tsirkin1-2/+4
Since commit 98b19252cf1bd97c54bc4613f3537c5ec0aae263, all serial devices declare MULTIPORT feature. To allow 0.12 compatibility, we should clear this when max_nr_ports is 1. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-29virtio-serial-bus: Fix bus initialisation and allow for bus identificationAmit Shah1-2/+1
This commit enables one to use multiple virtio-serial devices and to assign ports to arbitrary devices like this: -device virtio-serial,id=foo -device virtio-serial,id=bar \ -device virtserialport,bus=foo.0,name=foo \ -device virtserialport,bus=bar.0,name=bar Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20virtio-serial-bus: Add ability to hot-unplug portsAmit Shah1-0/+2
Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20virtio-serial-bus: Add a port 'name' property for port discovery in guestsAmit Shah1-0/+17
The port 'id' or number is internal state between the guest kernel and our bus implementation. This is invocation-dependent and isn't part of the guest-host ABI. To correcly enumerate and map ports between the host and the guest, the 'name' property is used. Example: -device virtserialport,name=org.qemu.port.0 This invocation will get us a char device in the guest at: /dev/virtio-ports/org.qemu.port.0 which can be a symlink to /dev/vport0p3 This 'name' property is exposed by the guest kernel in a sysfs attribute: /sys/kernel/virtio-ports/vport0p3/name A simple udev script can pick up this name and create the symlink mentioned above. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20virtio-serial-bus: Maintain guest and host port open/close stateAmit Shah1-0/+94
Via control channel messages, the guest can tell us whether a port got opened or closed. Similarly, we can also indicate to the guest of host port open/close events. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20virtio-console: qdev conversion, new virtio-serial-busAmit Shah1-0/+507
This commit converts the virtio-console device to create a new virtio-serial bus that can host console and generic serial ports. The file hosting this code is now called virtio-serial-bus.c. The virtio console is now a very simple qdev device that sits on the virtio-serial-bus and communicates between the bus and qemu's chardevs. This commit also includes a few changes to the virtio backing code for pci and s390 to spawn the virtio-serial bus. As a result of the qdev conversion, we get rid of a lot of legacy code. The old-style way of instantiating a virtio console using -virtioconsole ... is maintained, but the new, preferred way is to use -device virtio-serial -device virtconsole,chardev=... With this commit, multiple devices as well as multiple ports with a single device can be supported. For multiple ports support, each port gets an IO vq pair. Since the guest needs to know in advance how many vqs a particular device will need, we have to set this number as a property of the virtio-serial device and also as a config option. In addition, we also spawn a pair of control IO vqs. This is an internal channel meant for guest-host communication for things like port open/close, sending port properties over to the guest, etc. This commit is a part of a series of other commits to get the full implementation of multiport support. Future commits will add other support as well as ride on the savevm version that we bump up here. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-13 10:07:02 +0000