| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Originally, timers were ticks based, and it made sense to
add ticks to current time to know when to trigger an alarm.
But since commit:
7447545 change all other clock references to use nanosecond resolution accessors
All timers use nanoseconds and we need to convert ticks to nanoseconds, by
doing something like:
y = muldiv64(x, get_ticks_per_sec(), PCI_FREQUENCY)
where x is the number of device ticks and y the number of system ticks.
y is used as nanoseconds in timer functions,
it works because 1 tick is 1 nanosecond.
(get_ticks_per_sec() is 10^9)
But as PCI frequency is 33 MHz, we can also do:
y = x * 30; /* 33 MHz PCI period is 30 ns */
Which is much more simple.
This implies a 33.333333 MHz PCI frequency,
but this is correct.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
|
|
We use muldiv64() to compute the time to wait:
timeout = muldiv64(get_ticks_per_sec(), timeout, 33000000);
but get_ticks_per_sec() is 10^9 (30 bit value) and timeout
is a 35 bit value.
Whereas muldiv64 is:
uint64_t muldiv64(uint64_t a, uint32_t b, uint32_t c)
So we loose 3 bits of timeout.
Swapping get_ticks_per_sec() and timeout fixes it.
We can also replace it by a multiplication by 30 ns,
but this changes PCI clock frequency from 33MHz to 33.333333MHz
and we need to do this on all the QEMU PCI devices (later...)
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
The diag288 watchdog is no sysbus device, therefore it doesn't get
triggered on resets automatically using dc->reset.
Let's register the reset handler manually, so we get correctly notified
again when a system reset was requested. Also reset the watchdog on
subsystem resets that don't trigger a full system reset.
Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
|
|
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
This patch allows QEMU to inject a NMI into a guest when the
watchdog expires.
Signed-off-by: Mao Chuan Li <maochuan@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Add vmstate structure to keep state and data during migration.
Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This patch introduces a new diag288 watchdog device that will, just like
other watchdogs, monitor a guest and take corresponding actions when it
detects that the guest is not responding.
diag288 is s390x specific. The wiring to s390x KVM will be done in
separate patches.
Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split out qemu-option.hx base changes]
|
|
If the guest programs a sufficiently large timeout value an integer
overflow can occur in i6300esb_restart_timer(). e.g. if the maximum
possible timer preload value of 0xfffff is programmed then we end up with
the calculation:
timeout = get_ticks_per_sec() * (0xfffff << 15) / 33000000;
get_ticks_per_sec() returns 1000000000 (10^9) giving:
10^9 * (0xfffff * 2^15) == 0x1dcd632329b000000 (65 bits)
Obviously the division by 33MHz brings it back under 64-bits, but the
overflow has already occurred.
Since signed integer overflow has undefined behaviour in C, in theory this
could be arbitrarily bad. In practice, the overflowed value wraps around
to something negative, causing the watchdog to immediately expire, killing
the guest, which is still fairly bad.
The bug can be triggered by running a Linux guest, loading the i6300esb
driver with parameter "heartbeat=2046" and opening /dev/watchdog. The
watchdog will trigger as soon as the device is opened.
This patch corrects the problem by using muldiv64(), which effectively
allows a 128-bit intermediate value between the multiplication and
division.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1427075508-12099-3-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The IO operations for the i6300esb watchdog timer are marked as
DEVICE_NATIVE_ENDIAN. This is not correct, and - as a PCI device - should
be DEVICE_LITTLE_ENDIAN.
This allows i6300esb to work on ppc targets (yes, using an Intel ICH
derived device on ppc is a bit odd, but the driver exists on the guest
and there's no more obviously suitable watchdog device).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1427075508-12099-2-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (130 commits)
acpi: drop unused code
aml-build: comment fix
acpi-build: fix typo in comment
acpi: update generated files
vhost user:support vhost user nic for non msi guests
aml-build: fix build for glib < 2.22
acpi: update generated files
Makefile.target: binary depends on config-devices
acpi-test-data: update after pci rewrite
acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
pci-hotplug-old: Has been dead for five major releases, bury
pci: Give a few helpers internal linkage
acpi: make build_*() routines static to aml-build.c
pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
pc: acpi-build: drop template patching and create PCI bus tree dynamically
tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
pc: acpi-build: simplify PCI bus tree generation
tests: add ACPI blobs for qemu with bridge cases
tests: bios-tables-test: add support for testing bridges
tests: ACPI test blobs update due to PCI0._CRS changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
hw/pci/pci-hotplug-old.c
|
|
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().
Most of its users assume the function can't fail. Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.
Just two users remain, in util/qemu-config.c. Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Convert the device models where initialization obviously can't fail.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
|
|
Old users of VMSTATE_TIMER* are mechanically changed to VMSTATE_TIMER_PTR
variants.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The function is empty after the previous patch, so remove it.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
qemu_clock_enable says:
/* Disabling the clock will wait for related timerlists to stop
* executing qemu_run_timers. Thus, this functions should not
* be used from the callback of a timer that is based on @clock.
* Doing so would cause a deadlock.
*/
and it indeed does: vm_stop uses qemu_clock_enable on QEMU_CLOCK_VIRTUAL
and watchdogs are based on QEMU_CLOCK_VIRTUAL, and we get a deadlock.
Use qemu_system_vmstop_request_prepare()/qemu_system_vmstop_request()
instead; yet another alternative could be a BH.
I checked other occurrences of vm_stop and they should not have this
problem. RUN_STATE_IO_ERROR could in principle (it depends on the
code in the drivers) but it has been fixed by commit 2bd3bce, "block:
asynchronously stop the VM on I/O errors", 2014-06-05.
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch improves docs and address small issues in event
callers.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
|
|
PortioList is an abstraction used for construction of MemoryRegionPortioList
from MemoryRegionPortio. It can be used later to unmap created memory regions.
It also requires proper cleanup because some of the memory inside is allocated
dynamically.
By moving PortioList ot device state we make it possible to cleanup later and
avoid leaking memory.
This change spans several target platforms. The following testcases cover all
changed lines:
qemu-system-ppc -M prep
qemu-system-i386 -vga qxl
qemu-system-i386 -M isapc -soundhw adlib -device ib700,id=watchdog0,bus=isa.0
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.
null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The category will be used to sort the devices displayed in
the command line help.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This was dead code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Convert over to memory regions to obsolete register_ioport*.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When this VMSD was introduced it's version fields were set to
sizeof(I6300State), making them essentially random from build to build,
version to version.
To fix this, we lock in a high version id and low minimum version id to
support old->new migration from all prior versions of this device's
state. This should work since the device state has not changed since
its introduction.
The potentially breaks migration from 1.5+ to 1.5, but since the
versioning was essentially random prior to this patch, new->old
migration was not consistently functional to begin with.
Reported-by: Nicholas Thomas <nick@bytemark.co.uk>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Drop ISADeviceClass::init and the resulting no-op initfn and let
children implement their own realizefn. Adapt error handling.
Split off an instance_init where sensible.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-21-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Prepare the new directory structure.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
