summaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2014-08-15ivshmem: check the value returned by fstat()zhanghailiang1-1/+5
The function fstat() may fail, so check its return value. Acked-by: Levente Kurusa <lkurusa@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-15l2cap: fix access to freed memoryzhanghailiang1-1/+1
Pointer 'ch' will be used in function 'l2cap_channel_open_req_msg' after it was previously freed in 'l2cap_channel_open'. Assigned it to NULL after it is freed. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-15intc: i8259: Convert Array allocation to g_new0Peter Crosthwaite1-1/+1
To be more array friendly and to indicate the IRQs are initially disconnected. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-15ppc: convert g_new(qemu_irq usages to g_new0Peter Crosthwaite3-3/+3
To indicate the IRQs are initially disconnected. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-15ssi: xilinx_spi: Initialise CS GPIOs as NULLPeter Crosthwaite1-1/+1
To properly indicate they are unconnected. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-15vmxnet3: don't use 'Yoda conditions'Gonglei1-8/+8
imitate nearby code about using '!value' or 'value == NULL' Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-15isa-bus: don't use 'Yoda conditions'Gonglei1-1/+1
imitate nearby code about using '!value' or 'value == NULL' Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-15audio: don't use 'Yoda conditions'Gonglei3-5/+6
imitate nearby code about using '!value' or 'value == NULL' Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-15usb: don't use 'Yoda conditions'Gonglei3-4/+4
imitate nearby code about using '!value' or 'value == NULL' Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-15pci-host: update uncorresponding descriptionGonglei1-1/+1
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-15pci-host: update obsolete reference about piix_pci.cGonglei3-3/+3
piix_pci.c has been renamed into piix.c at commit c0907c9e6417cb959dfd9ef6873221536ec91351 update the obsolete reference. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-15apic: Fix reported DFR contentJan Kiszka1-1/+1
IA-32 SDM, Figure 10-14: Bits 27:0 are reserved as 1. Fixes Jailhouse hypervisor start with in-kernel irqchips off. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-09hw/timer: Move extern declaration from .c to .h fileStefan Weil1-3/+0
This fixes a warning from smatch (static code analyser). Fix also the comment with the renamed source file name. Signed-off-by: Stefan Weil <sw@weilnetz.de> hw/timer/tusb6010.c | 3 --- include/hw/usb.h | 7 ++++++- 2 files changed, 6 insertions(+), 4 deletions(-) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-09virtio: Move extern declaration to header fileStefan Weil1-2/+0
This fixes a warning from smatch (static code analyser). Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-09hw/timer/imx_*: fix TIMER_MAX clash with system symbolMichael Tokarev2-24/+24
The symbol TIMER_MAX used in imx_epit.c and imx_gpt.c clashes with system symbol with the same name. Because all qemu source files includes qemu-common.h which, in turn, includes limits.h, which is not unusual to define it. Rename local symbol to have a reasonable prefix. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-05vfio: Don't cache MSIMessageAlex Williamson1-6/+2
Commit 40509f7f added a test to avoid updating KVM MSI routes when the MSIMessage is unchanged and f4d45d47 switched to relying on this rather than doing our own comparison. Our cached msg is effectively unused now. Remove it. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-08-05vfio: Fix MSI-X vector expansionAlex Williamson1-9/+29
When new MSI-X vectors are enabled we need to disable MSI-X and re-enable it with the correct number of vectors. That means we need to reprogram the eventfd triggers for each vector. Prior to f4d45d47 vector->use tracked whether a vector was masked or unmasked and we could always pick the KVM path when available for unmasked vectors. Now vfio doesn't track mask state itself and vector->use and virq remains configured even for masked vectors. Therefore we need to ask the MSI-X code whether a vector is masked in order to select the correct signaling path. As noted in the comment, MSI relies on hardware to handle masking. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: qemu-stable@nongnu.org # QEMU 2.1
2014-08-04sd: sdhci: Fix ADMA dma_memory_read accessPeter Crosthwaite1-1/+2
This dma_memory_read was giving too big a size when begin was non-zero. This could cause segfaults in some circumstances. Fix. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04hw/arm/virt: formatting: memory mapAndrew Jones1-8/+8
Add some spacing and zeros to make it easier to read and modify the map. This patch has no functional changes. The review looks ugly, but it's actually pretty easy to confirm all the addresses are as they should be - thanks to the new formatting ;-) Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04hw/arm/boot: Set PC correctly when loading AArch64 ELF filesPeter Maydell1-2/+6
The code in do_cpu_reset() correctly handled AArch64 CPUs when running Linux kernels, but was missing code in the branch of the if() that deals with loading ELF files. Correctly jump to the ELF entry point on reset rather than leaving the reset PC at zero. Reported-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Christopher Covington <cov@codeaurora.org> Cc: qemu-stable@nongnu.org
2014-08-04Merge remote-tracking branch 'remotes/amit-virtio-rng/for-2.2' into stagingPeter Maydell1-13/+12
* remotes/amit-virtio-rng/for-2.2: virtio-rng: replace error_set calls with error_setg virtio-rng: Move error-checking forward to prevent memory leak Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04virtio-rng: replace error_set calls with error_setgJohn Snow1-5/+4
Under recommendation from Luiz Capitulino, we are changing the error_set calls to error_setg while we are fixing up the error handling pathways of virtio-rng. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2014-08-04virtio-rng: Move error-checking forward to prevent memory leakJohn Snow1-10/+10
This patch pushes the error-checking forward and the virtio initialization backward in the device realization function in order to prevent memory leaks for hot plug scenarios. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2014-08-01qemu: support xen hvm direct kernel bootChunyan Liu3-0/+33
qemu side patch to support xen HVM direct kernel boot: if -kernel exists, calls xen_load_linux(), which will read kernel/initrd and add a linuxboot.bin or multiboot.bin option rom. The linuxboot.bin/multiboot.bin will load kernel/initrd and jump to execute kernel directly. It's working when xen uses seabios. During this work, found the 'kvmvapic' is in option_rom list, it should not be there in xen case. Set s->vapic_control = 0 in xen_apic_realize() to handle that. Signed-off-by: Chunyan Liu <cyliu@suse.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-29hw/arm/virt: fix pl031 addr typoAndrew Jones1-1/+1
pl031's base address should be 0x9010000, not 0x90010000, otherwise it sits in ram when configuring a guest with greater than 1G. Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-29piix: set legacy table size for 1.7Michael S. Tsirkin1-0/+1
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-29acpi-build: tweak acpi migration limitsMichael S. Tsirkin1-7/+9
- Tweak error message for legacy machine type: Basically if table size exceeds the limits we set all bets are off for migration: e.g. it can start failing even within given qemu minor version simply because of a bugfix. - Increase table size to 128k. - Make sure we notice it long before we start getting close to the 128k limit: warn at 64k. - Don't fail if we exceed the limit: most people don't care about migration, even less people care about cross version miration. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-29pc: future-proof migration-compatibility of ACPI tablesPaolo Bonzini1-1/+9
This patch avoids that similar changes break QEMU again in the future. QEMU will now hard-code 64k as the maximum ACPI table size, which (despite being an order of magnitude smaller than 640k) should be enough for everyone. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-29acpi-build: minor code cleanupMichael S. Tsirkin1-6/+12
Fix up and add comments to clarify code, plus a trivial code change for clarity. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-29pc: acpi: generate AML only for PCI0 devices if PCI bridge hotplug is disabledIgor Mammedov1-5/+21
Fixes migration regression from QEMU-1.7 to a newer QEMUs. SSDT table size in QEMU-1.7 doesn't change regardless of a number of PCI bridge devices present at startup. However in QEMU-2.0 since addition of hotplug on PCI bridges, each PCI bridge adds ~1875 bytes to SSDT table, including pc-i440fx-1.7 machine type where PCI bridge hotplug disabled via compat property. It breaks migration from "QEMU-1.7" to "QEMU-2.[01] -M pc-i440fx-1.7" since RAMBlock size of ACPI tables on target becomes larger then on source and migration fails with: "Length mismatch: /rom@etc/acpi/tables: 2000 in != 3000" error. Fix this by generating AML only for PCI0 bus if hotplug on PCI bridges is disabled and preserves PCI brigde description in AML as it was done in QEMU-1.7 for pc-i440fx-1.7. It will help to maintain size of SSDT static regardless of number of PCI bridges on startup for pc-i440fx-1.7 machine type. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-28pc: hack for migration compatibility from QEMU 2.0Paolo Bonzini3-4/+77
Changing the ACPI table size causes migration to break, and the memory hotplug work opened our eyes on how horribly we were breaking things in 2.0 already. The ACPI table size is rounded to the next 4k, which one would think gives some headroom. In practice this is not the case, because the user can control the ACPI table size (each CPU adds 97 bytes to the SSDT and 8 to the MADT) and so some "-smp" values will break the 4k boundary and fail to migrate. Similarly, PCI bridges add ~1870 bytes to the SSDT. This patch concerns itself with fixing migration from QEMU 2.0. It computes the payload size of QEMU 2.0 and always uses that one. The previous patch shrunk the ACPI tables enough that the QEMU 2.0 size should always be enough; non-AML tables can change depending on the configuration (especially MADT, SRAT, HPET) but they remain the same between QEMU 2.0 and 2.1, so we only compute our padding based on the sizes of the SSDT and DSDT. Migration from QEMU 1.7 should work for guests that have a number of CPUs other than 12, 13, 14, 54, 55, 56, 97, 98, 139, 140. It was already broken from QEMU 1.7 to QEMU 2.0 in the same way, though. Even with this patch, QEMU 1.7 and 2.0 have two different ideas of "-M pc-i440fx-2.0" when there are PCI bridges. Igor sent a patch to adopt the QEMU 1.7 definition. I think distributions should apply it if they move directly from QEMU 1.7 to 2.1+ without ever packaging version 2.0. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-28acpi-dsdt: procedurally generate _PRTPaolo Bonzini2-1832/+128
This replaces the _PRT constant with a method that computes it. The problem is that the DSDT+SSDT have grown from 2.0 to 2.1, enough to cross the 8k barrier (we align the ACPI tables to 4k before putting them in fw_cfg). This causes problems with migration and the pc-i440fx-2.0 machine type. The solution to the problem is to hardcode 64k as the limit, but this doesn't solve the bug with pc-i440fx-2.0. The fix will be for QEMU 2.1 to use exactly the same size as QEMU 2.0 for the ACPI tables. First, however, we must make the actual AML equal or smaller; to do this, rewrite _PRT in a way that saves over 1k of bytecode. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-23usb: mtp: tag root property as experimentalGerd Hoffmann1-1/+1
Reason: we don't want commit to that interface yet. Possibly the implementation will be switched over to use fsdev. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-07-22hw/misc/imx_ccm.c: Add missing VMState list terminatorPeter Maydell1-0/+1
The VMStateDescription for the imx_ccm device was missing its terminator. Found by static search of the codebase using a regex based on one suggested by Ian Jackson: pcregrep -rMi '(?s)VMStateField(?:(?!END_OF_LIST).)*?;' $(git grep -l 'VMStateField\[\]') Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-stable@nongnu.org
2014-07-22vmstate_xhci_event: fix unterminated field listLaszlo Ersek1-0/+1
"vmstate_xhci_event" was introduced in commit 37352df3 ("xhci: add live migration support"), and first released in v1.6.0. The field list in this VMSD is not terminated with the VMSTATE_END_OF_LIST() macro. During normal use (ie. migration), the issue is practically invisible, because the "vmstate_xhci_event" object (with the unterminated field list) is only ever referenced -- via "vmstate_xhci_intr" -- if xhci_er_full() returns true, for the "ev_buffer" test. Since that field_exists() check (apparently) almost always returns false, we almost never traverse "vmstate_xhci_event" during migration, which hides the bug. However, Amit's vmstate checker forces recursion into this VMSD as well, and the lack of VMSTATE_END_OF_LIST() breaks the field list terminator check (field->name != NULL) in dump_vmstate_vmsd(). The result is undefined behavior, which in my case translates to infinite recursion (because the loop happens to overflow into "vmstate_xhci_intr", which then links back to "vmstate_xhci_event"). Add the missing terminator. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-22Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' ↵Peter Maydell5-28/+52
into staging Patch queue for ppc - 2014-07-22 Only a single bug fix to make -mem-path only affect RAM regions. # gpg: Signature made Tue 22 Jul 2014 16:38:04 BST using RSA key ID 03FEDC60 # gpg: Can't check signature: public key not found * remotes/agraf/tags/signed-ppc-for-upstream: ppc: fix -mem-path failure Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-22ppc: fix -mem-path failureHu Tao5-28/+52
commit e938ba0c tried to enable -mem-path for ppc but breaked some ppc boards. The problems are: 1. it fails when allocating memory for rom, sram whose sizes are less than huge page size: ./ppc-softmmu/qemu-system-ppc -m 512 -mem-path /hugepages/ \ -kernel /home/hutao/Downloads/vmlinux-ppc -initrd \ /home/hutao/Downloads/initrd-ppc.gz qemu-system-ppc: /mnt/data/projects/qemu/exec.c:1184: qemu_ram_set_idstr: Assertion `new_block' failed. 2. if there is a numa node backed by memory backend object, qemu fails with message: ./ppc-softmmu/qemu-system-ppc -m 512 \ -object memory-backend-file,size=512M,mem-path=/hugepages,id=f0 \ -numa node,nodeid=0,memdev=f0 \ -kernel /home/hutao/Downloads/vmlinux-ppc \ -initrd /home/hutao/Downloads/initrd-ppc.gz qemu-system-ppc: memory backend f0 is used multiple times. Each -numa option must use a different memdev value. This patch does following: 1. replaces memory_region_allocate_system_memory() with memory_region_init_ram() for rom, sram. Then only system memory is backed by hugepages when specifying mem-path. 2. for memory banks, allocates all ram with one memory_region_allocate_system_memory(), and use memory_region_init_alias() to initialize memory banks. Tested machines: default(g3beige), mac99, taihu, bamboo, ref405ep. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-22virtio-rng: Add human-readable error message for negative max-bytes parameterJohn Snow1-1/+7
If a negative integer is used for the max_bytes parameter, QEMU currently calls abort() and leaves behind a core dump. This patch replaces the abort with a simple error message to make the reason for the termination clearer. This also ensures device-hotplug with invalid input doesn't cause qemu to quit. There is an underlying insufficiency in the parameter parsing code of QEMU that renders it unable to reject negative values for unsigned properties, thus the error message "a non-negative integer below 2^63" is the most user-friendly and correct message we can give until the underlying insufficiency is corrected. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2014-07-21machine: Replace underscores in machine's property namesMarcel Apfelbaum1-4/+4
Replaced '_' with '-' to comply with QOM guidelines. Made the conversion from command line to QMP in vl.c. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-07-18Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-07-18' ↵Peter Maydell3-3/+3
into staging trivial patches for 2014-07-18 # gpg: Signature made Fri 18 Jul 2014 15:04:43 BST using RSA key ID A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514 66A7 BEE5 9D74 A4C3 D7DB * remotes/mjt/tags/trivial-patches-2014-07-18: tests: Add missing 'static' attributes (fix warnings from smatch) migration: Add missing 'static' attribute qga: Add missing 'static' attribute hw/usb: Add missing 'static' attribute doc: slirp supports ICMP echo if enabled in Linux qemu-img: Remove redundancy "ret = -1" Fix new typos in comments (found by codespell) slirp: Give error message if hostfwd_add/remove for unrecognized vlan/stack Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-18Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-52/+0
Andreas's fixes to --enable-modules, two 2.1 regression fixes, and a new qtest. Michael sent a pull request of his own, so I dropped the vhost changes. # gpg: Signature made Fri 18 Jul 2014 14:30:34 BST using RSA key ID 9B4D86F2 # gpg: Can't check signature: public key not found * remotes/bonzini/tags/for-upstream: Revert "kvmclock: Ensure time in migration never goes backward" Revert "kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation" module: Don't complain when a module is absent module: Simplify module_load() qtest: new test for wdt_ib700 target-i386: Allow execute from user mode when SMEP is enabled. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-18hw/usb: Add missing 'static' attributeStefan Weil1-1/+1
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-18Fix new typos in comments (found by codespell)Stefan Weil2-2/+2
arbitary -> arbitrary basicly -> basically Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-07-18Revert "kvmclock: Ensure time in migration never goes backward"Paolo Bonzini1-48/+0
This reverts commit a096b3a6732f846ec57dc28b47ee9435aa0609bf. This patch caused a hang that was fixed by commit 9b17868 (kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation, 2014-06-03), and we just had to revert that commit. Drop this one too. Cc: agraf@suse.de Cc: mtosatti@redhat.com Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-18Revert "kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec ↵Paolo Bonzini1-4/+0
calculation" This reverts commit 9b1786829aefb83f37a8f3135e3ea91c56001b56. This patch fixed a hang introduced by commit a096b3a (kvmclock: Ensure time in migration never goes backward, 2014-05-16), but it causes a regression in migration whose cause is not quite clear. Because of this, I'm choosing to revert both patches. This trades a 2.1 regression for a bug that's been there forever. Cc: agraf@suse.de Cc: mtosatti@redhat.com Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-18Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell3-14/+9
pc,vhost,test fixes Minor bugfixes all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 18 Jul 2014 00:43:04 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: vhost-user: minor cleanups qtest: Adapt vhost-user-test to latest vhost-user changes vhost-user: Fix VHOST_SET_MEM_TABLE processing qtest: fix vhost-user-test compilation with old GLib fix typo: apci -> acpi pc_piix: Reuse pc_compat_1_2() for pc-0.1[0123] pc: fix qemu exiting with error when -m X < 128 with old machines types Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-18vhost-user: minor cleanupsMichael S. Tsirkin1-1/+3
assert to verify cast does not discard information minor style fixup. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-18vhost-user: Fix VHOST_SET_MEM_TABLE processingNikolay Nikolaev1-1/+3
qemu_get_ram_fd doesn't accept a guest physical address. ram_addr_t are opaque values that are assigned in qemu_ram_alloc. Find the ram_addr_t corresponding to the userspace_addr using qemu_ram_addr_from_host, and then call qemu_get_ram_fd on it. Thanks to Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-17cadence_uart: check for serial backend before using it.KONRAD Frederic1-4/+11
This checks that s->chr is not NULL before using it. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-16virtio-serial-bus: keep port 0 reserved for virtconsole even on unplugAmit Shah1-3/+11
We keep port 0 reserved for compat with older guests, where only virtio-console was expected. Even if a system is started without a virtio-console port, port #0 is kept aside. However, after a virtconsole port is unplugged, port id 0 became available, and the next hotplug of a virtserialport caused failure due to it not being a console port. Steps to reproduce: $ ./x86_64-softmmu/qemu-system-x86_64 -m 512 -cpu host -enable-kvm -device virtio-serial-pci -monitor stdio -vnc :1 QEMU 2.0.91 monitor - type 'help' for more information (qemu) device_add virtconsole,id=p1 (qemu) device_del p1 (qemu) device_add virtserialport,id=p1 Port number 0 on virtio-serial devices reserved for virtconsole devices for backward compatibility. Device 'virtserialport' could not be initialized (qemu) quit Reported-by: dengmin <mdeng@redhat.com> Reviewed-by: Amos Kong <akong@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-02 04:16:53 +0000