summaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2011-10-16i8259: Drop obsolete prototypesJan Kiszka1-2/+0
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16i8259: Remove premature inline function attributesJan Kiszka1-3/+3
The compiler is smarter in choosing the right optimization. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16pc: Fix and clean up PIC-to-APIC IRQ pathJan Kiszka4-12/+12
The master PIC is connected to the LINTIN0 of the APICs. As the APIC currently does not track the state of that line, we have to ask the PIC to reinject its IRQ after the CPU picked up an event from the APIC. This introduces pic_get_output to read the master PIC IRQ line state without changing it. The APIC uses this function to decide if a PIC IRQ should be reinjected on apic_update_irq. This reflects better how the real hardware works. The patch fixes some failures of the kvm unit tests apic and eventinj by allowing to enable the proper CPU IRQ deassertion when the guest masks some pending IRQs at PIC level. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16pc: Convert GSIState::i8259_irq into arrayJan Kiszka2-2/+4
Will be required when we no longer let i8259_init allocate the PIC IRQs but convert that chips to qdev. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16pc: Generalize ISA IRQs to GSIsJan Kiszka5-31/+42
The ISA bus IRQ range is 0..15. What isa_irq_handler and IsaIrqState are actually dealing with are the Global System Interrupts. Refactor the code to clarify this. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16pc: Drop useless test from isa_irq_handlerJan Kiszka1-3/+2
IsaIrqState::ioapic is always non-NULL. Probably, the concrete qemu_irq was supposed to be tested, but that's already done by qemu_set_irq. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16target-xtensa: add Avnet LX60/LX110/LX200 boardsMax Filippov1-0/+233
These boards carry similar hardware: SDRAM (48M for LX110, 64M for LX60, 96M for LX200), 16 Mbyte FLASH, FPGA, 10/100 Mbps Ethernet PHY and 16550 UART. FPGA may be loaded with almost any Tensilica processor. It is also used to implement Ethernet MAC, e.g. OpenCores 10/100 Mbps Ethernet MAC and LED/DIP switches access. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16hw: add OpenCores 10/100 Mbps Ethernet controllerMax Filippov1-0/+728
This is OpenCores Ethernet MAC + subset of National Semiconductors DP83838C PHY. OpenCores Ethernet MAC project: http://opencores.org/project,ethmac Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16target-xtensa: rename dc232b board to simMax Filippov1-13/+13
This is to get aligned with the linux name for this machine. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16target-xtensa: implement external interrupt mappingMax Filippov1-0/+12
Xtensa cores may have different mapping of external interrupt pins to internal IRQ numers. Implement API to acquire core IRQ by its external interrupt number. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16target-xtensa: remove hand-written xtensa cores implementationsMax Filippov1-107/+0
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-15target-xtensa: fix guest hang on masked CCOMPARE interruptMax Filippov1-1/+26
QEMU timer is used to post CCOMPARE interrupt when the core is halted. If that CCOMPARE interrupt is masked off then the timer must be rearmed in the callback, otherwise it will be rearmed next time the core goes to halt by the waiti instruction. Add test case into timer testsuite. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-15Move graphic-related coalesced MMIO flushes to affected device modelsJan Kiszka2-0/+8
This is conceptually cleaner and will allow us to drop the nographic timer. Moreover, it will be mandatory to fully exploit future per-device coalesced MMIO rings. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-14Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori3-0/+6
2011-10-14Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori1-1/+1
2011-10-14Merge remote-tracking branch 'kraxel/usb.28' into stagingAnthony Liguori8-20/+68
2011-10-14Merge remote-tracking branch 'qemu-kvm-tmp/memory/batch' into stagingAnthony Liguori32-388/+390
2011-10-14arm_pic: Fix typoAndreas Färber1-1/+1
interrput -> interrupt Cc: Paul Brook <paul@codesourcery.com> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-13usb-hub: don't trigger assert on packet completion.Gerd Hoffmann1-2/+6
Calling usb_packet_complete() recursively when passing up the completion event up the chain for devices connected via usb hub will trigger an assert. So don't do that, make the usb hub emulation call the upstream completion callback directly instead. Based on a patch from Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-13usb-hid: activate usb tablet / mouse after migration.Gerd Hoffmann1-0/+11
qemu uses the ps/2 mouse by default. The usb tablet (or mouse) is activated as soon as qemu sees some guest activity on the device, i.e. polling for HID events. That used to work fine for both fresh boot and migration. Remote wakeup support changed the picture though: There will be no polling after migration in case the guest suspended the usb bus, waiting for wakeup events. Result is that the ps/2 mouse stays active. Fix this by activating the usb tablet / mouse in post_load() in case the guest enabled remote wakeup. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-13hw/usb-ohci: Honour endpoint maximum packet sizePeter Maydell1-10/+27
Honour the maximum packet size for endpoints; this applies when sending non-isochronous data and means we transfer only as much as the endpoint allows, leaving the transfer descriptor on the list for another go next time around. This allows usb-net to work when connected to an OHCI controller model. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-13hw/usb-ohci: Fix OHCI_TD_T1 bit position definitionPeter Maydell1-1/+1
The OHCI Transfer Descriptor T (DataToggle) bits are 24 and 25; fix an error which accidentally overlaid them both on the same bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-13usb: fix port resetGerd Hoffmann5-4/+17
commit 891fb2cd4592b6fe76106a69e0ca40efbf82726a removed the implicit detach before (re-)attaching in usb_attach(). Some usb host controllers used that behavior though to do a port reset by a detach+attach sequence. This patch establishes old behavior by adding a new usb_reset() function for port resets and putting it into use, thereby also unifying port reset behavior of all host controllers. The patch also adds asserts to usb_attach() and usb_detach() to make sure the calls are symmetrical. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-13usb-hub: need to check dev->attachedGerd Hoffmann1-2/+2
commit 891fb2cd4592b6fe76106a69e0ca40efbf82726a did that for all host controllers, the usb hub was left out by accident. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-13usb-storage: fix NULL pointer dereference.Gerd Hoffmann1-1/+4
When a usb packet is canceled we need to check whenever we actually have a scsi request in flight before we try to cancel it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-11isa: Remove isa_init_ioport_range and isa_init_ioportRichard Henderson2-16/+5
All users have been converted to either isa_register_ioport or isa_register_old_portio_list. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11ide: Convert to isa_register_portio_listRichard Henderson5-21/+30
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11vmport: Convert to isa_register_ioportRichard Henderson1-3/+13
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11pc: Convert port92 to isa_register_ioportRichard Henderson1-3/+13
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11vga: Convert to isa_register_portio_listRichard Henderson6-49/+59
[jan: fix cut'n'paste errors] [avi: adjust pci variants not to use isa functions] Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11sb16: Convert to isa_register_portio_listRichard Henderson1-19/+13
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11parallel: Convert to isa_register_portio_listRichard Henderson1-19/+28
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11ne2000: Convert to isa_register_ioportRichard Henderson1-4/+1
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11rtc: Convert to isa_register_ioportRichard Henderson1-3/+12
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11m48t59: Convert to isa_register_ioportRichard Henderson1-3/+12
The sysbus interface is as yet unconverted. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11gus: Convert to isa_register_portio_listRichard Henderson1-19/+19
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11fdc: Convert to isa_register_portio_listRichard Henderson1-30/+4
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11isa: Add isa_register_portio_list()Avi Kivity2-1/+47
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11scsi: Support I/O statusLuiz Capitulino1-0/+2
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-11ide: Support I/O statusLuiz Capitulino1-0/+2
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-11virtio: Support I/O statusLuiz Capitulino1-0/+2
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-10isa: Tidy support code for isabus_get_fw_dev_pathRichard Henderson2-24/+6
The only user of ISADevice.ioports is isabus_get_fw_dev_path, and it only looks at the first entry of the array. Which suggests that this entire array+sort operation can be replaced by a simple minimum. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10ppc_newworld: convert to memory APIAvi Kivity1-22/+17
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10hw/versatile_pci: Expose multiple sysbus mmio regionsPeter Maydell3-38/+28
Clean up versatile_pci to expose the various PCI mmio regions properly as separate mmio regions rather than as a single mmio which uses callbacks to map and unmap everything. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10hw/arm11mpcore: Clean up to avoid using sysbus_mmio_init_cb2Peter Maydell1-12/+1
Clean up the initialisation of the realview_mpcore device to avoid using sysbus_init_mmio_cb2(): we can pass through the MemoryRegion of the private arm11mpcore_priv device directly now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10ppc405_boards: convert to memory APIAvi Kivity1-48/+37
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10petalogix_s2adsp1800: convert to memory APIAvi Kivity1-8/+10
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10petalogix_ml605: convert to memory APIAvi Kivity1-8/+7
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10palm: convert to memory APIAvi Kivity1-28/+25
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10hw/lan9118.c: Convert to MemoryRegionPeter Maydell1-18/+11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-07 09:51:24 +0000