summaryrefslogtreecommitdiff
path: root/include/hw/arm
AgeCommit message (Collapse)AuthorFilesLines
2016-07-12Clean up decorations and whitespace around header guardsMarkus Armbruster2-4/+4
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12Clean up ill-advised or unusual header guardsMarkus Armbruster1-4/+3
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12Clean up header guards that don't match their file nameMarkus Armbruster2-5/+5
Header guard symbols should match their file name to make guard collisions less likely. Offenders found with scripts/clean-header-guards.pl -vn. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-04ast2400: add SMC controllers (FMC and SPI)Cédric Le Goater1-0/+3
The Aspeed AST2400 soc includes a static memory controller for the BMC which supports NOR, NAND and SPI flash memory modules. This controller has two modes : the SMC for the legacy interface which supports only one module and the FMC for the new interface which supports up to five modules. The AST2400 also includes a SPI only controller used for the host firmware, commonly called BIOS on Intel. It can be used in three mode : a SPI master, SPI slave and SPI pass-through Below is the initial framework for the SMC controller (FMC mode only) and the SPI controller: the sysbus object, MMIO for registers configuration and controls. Each controller has a SPI bus and a configurable number of CS lines for SPI flash slaves. The differences between the controllers are small, so they are abstracted using indirections on the register numbers. Only SPI flash modules are supported. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1467138270-32481-7-git-send-email-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added one missing error_propagate] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-27ast2400: Integrate the SCU model and set silicon revisionAndrew Jeffery1-0/+2
By specifying the silicon revision we select the appropriate reset values for the SoC. Additionally, expose hardware strapping properties aliasing those provided by the SCU for board-specific configuration. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1466744305-23163-3-git-send-email-andrew@aj.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14arm: xlnx-zynqmp: Add xlnx-dp and xlnx-dpdmaKONRAD Frederic1-0/+4
This adds the DP and the DPDMA to the Zynq MP platform. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Message-id: 1465833014-21982-10-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/arm/virt: Add PMU node for virt machineShannon Zhao1-0/+4
Add a virtual PMU device for virt machine while use PPI 7 for PMU overflow interrupt number. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1465267577-1808-3-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06xlnx-zynqmp: Make the RPU subsystem optionalEdgar E. Iglesias1-0/+2
The way we currently model the RPU subsystem is of quite limited use. In addition to that, it causes problems for KVM and for GDB debugging. Make the RPU optional by adding a has_rpu property and default to having it disabled. This changes the default setup from having the RPU to not longer having it. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1464173555-12800-3-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06xlnx-zynqmp: Add a secure prop to en/disable ARM Security ExtensionsEdgar E. Iglesias1-0/+3
Add a secure prop to en/disable ARM Security Extensions. This is particularly useful for KVM runs. Default to disabled to match the behavior of KVM. This changes the default setup from having the ARM Security Extensions to not longer having them. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1464173555-12800-2-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06i2c: add aspeed i2c controllerCédric Le Goater1-0/+2
The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-02Add ENET device to i.MX6 SOC.Jean-Christophe Dubois1-2/+4
This adds the ENET device to the i.MX6 SOC. This was tested by booting Linux on an Qemu i.MX6 instance and accessing the internet from the linux guest. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-05-19qemu-common: push cpu.h inclusion out of qemu-common.hPaolo Bonzini4-0/+4
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19arm: remove useless cpu.h inclusionPaolo Bonzini1-2/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19arm: include cpu-qom.h in files that require ARMCPUPaolo Bonzini4-1/+4
This will keep things working when cpu.h will not be included indirectly almost everywhere (either directly or through qemu-common.h). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-12i.MX: Add i.MX6 SOC implementation.Jean-Christophe DUBOIS1-0/+450
For now we only support the following devices: * up to 4 Cortex A9 cores * A9 MPCORE (SCU, GIC, TWD) * 5 i.MX UARTs * 2 EPIT timers * 1 GPT timer * 3 I2C controllers * 7 GPIO controllers * 6 SDHC controllers * 5 SPI controllers * 1 CCM device * 1 SRC device * various ROM/RAM areas. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16bcm2835_dma: add emulation of Raspberry Pi DMA controllerGrégory ESTRADE1-0/+2
At present, all DMA transfers complete inline (so a looping descriptor queue will lock up the device). We also do not model pause/abort, arbitrarion/priority, or debug features. Signed-off-by: Grégory ESTRADE <gregory.estrade@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1457467526-8840-6-git-send-email-Andrew.Baumann@microsoft.com [AB: implement 2D mode, cleanup/refactoring for upstream submission] Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16bcm2835_fb: add framebuffer device for Raspberry PiGrégory ESTRADE1-0/+2
The framebuffer occupies the upper portion of memory (64MiB by default), but it can only be controlled/configured via a system mailbox or property channel (to be added by a subsequent patch). Signed-off-by: Grégory ESTRADE <gregory.estrade@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1457467526-8840-4-git-send-email-Andrew.Baumann@microsoft.com [AB: added Windows (BGR) support and cleanup/refactoring for upstream submission] Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16bcm2835_aux: add emulation of BCM2835 AUX (aka UART1) blockAndrew Baumann1-0/+2
At present only the core UART functions (data path for tx/rx) are implemented, which is enough for UEFI to boot. The following features/registers are unimplemented: * Line/modem control * Scratch register * Extra control * Baudrate * SPI interfaces Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1457467526-8840-3-git-send-email-Andrew.Baumann@microsoft.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16hw/arm: Add ASPEED AST2400 SoC modelAndrew Jeffery1-0/+35
While the ASPEED AST2400 SoC[1] has a broad range of capabilities this implementation is minimal, comprising an ARM926 processor, ASPEED VIC and timer devices, and a 8250 UART. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-4-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04arm: boot: Support big-endian elfsPeter Crosthwaite1-0/+9
Support ARM big-endian ELF files in system-mode emulation. When loading an elf, determine the endianness mode expected by the elf, and set the relevant CPU state accordingly. With this, big-endian modes are now fully supported via system-mode LE, so there is no need to restrict the elf loading to the TARGET endianness so the ifdeffery on TARGET_WORDS_BIGENDIAN goes away. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: fix typo in comments] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04hw/arm/virt: Provide a secure-only RAM if booting in Secure modePeter Maydell1-0/+1
If we're booting in Secure mode, provide a secure-only RAM (just 16MB) so that secure firmware has somewhere to run from that won't be accessible to the Non-secure guest. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1455288361-30117-2-git-send-email-peter.maydell@linaro.org
2016-02-03arm/boot: move highbank secure board setup code to common routineAndrew Baumann1-0/+5
The new version is slightly different, to support Rasbperry Pi (in particular, Pi1's arm11 core which doesn't support v7 instructions such as MOVW). Tested-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03bcm2836: add bcm2836 SoC deviceAndrew Baumann1-0/+35
This is the SoC for Raspberry Pi 2. Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03bcm2835_peripherals: add rollup device for bcm2835 peripheralsAndrew Baumann2-0/+170
This device maintains all the non-CPU peripherals on bcm2835 (Pi1) which are also present on bcm2836 (Pi2). It also implements the private address spaces used for DMA and mailboxes. Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03arm: virt-acpi: each MADT.GICC entry as enabled unconditionallyIgor Mammedov1-1/+0
in current impl. condition build_madt() { ... if (test_bit(i, cpuinfo->found_cpus)) is always true since loop handles only present CPUs in range [0..smp_cpus). But to fill usless cpuinfo->found_cpus we do unnecessary scan over QOM tree to find the same CPUs. So mark GICC as present always and drop not needed code that fills cpuinfo->found_cpus. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 1454323689-248759-1-git-send-email-imammedo@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-21hw/arm/virt: add secure memory region and UARTPeter Maydell1-0/+1
Add a secure memory region to the virt board, which is the same as the nonsecure memory region except that it also has a secure-only UART in it. This is only created if the board is started with the '-machine secure=on' property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21xlnx-zynqmp: Connect the SPI devicesAlistair Francis1-0/+3
Connect the Xilinx SPI devices to the ZynqMP model. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> [ PC changes * Use QOM alias for bus connectivity on SoC level ] Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> [PMM: free the g_strdup_printf() string when finished with it] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15xlnx-zynqmp: Add support for high DDR memory regionsAlistair Francis1-0/+12
The Xilinx ZynqMP SoC and EP108 board supports three memory regions: - A 2GB region starting at 0 - A 32GB region starting at 32GB - A 256GB region starting at 768GB This patch adds support for the first two memory regions, which is automatically created based on the size specified by the QEMU memory command line argument. On hardware the physical memory region is one continuous region, it is then mapped into the three different regions by the DDRC. As we don't model the DDRC this is done at startup by QEMU. The board creates the memory region and then passes that memory region to the SoC. The SoC then maps the memory regions. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: a1e47db941d65733724a300fcd98b74fbeeaaf22.1452637205.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17i.MX: Add an i.MX25 specific CCM class/instanceJean-Christophe Dubois1-2/+2
With this CCM, i.MX25 timer is accurate with "real world time". Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 2c0cf90be767bfc8520661eca891ab22c61f18fe.1449528242.git.jcd@tribudubois.net Reviewed-by Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17i.MX: Split the CCM class into an abstract base class and a concrete classJean-Christophe Dubois2-4/+4
The IMX_CCM class is now the base abstract class that is used by EPIT and GPT timer implementation. IMX31_CCM class is the concrete class implementing CCM for i.MX31 SOC. For now the i.MX25 continues to use the i.MX31 CCM implementation. An i.MX25 specific CCM will be introduced in a later patch. We also rework initialization to stop using deprecated sysbus device init. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: fd3c7f87b50f5ebc99ec91f01413db35017f116d.1449528242.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17ARM: Virt: Add a GPIO controllerShannon Zhao1-0/+1
ACPI 5.0 supports GPIO-signaled ACPI Events. This can be used for powerdown, hotplug evnets. Add a GPIO controller in machine virt, to support powerdown, maybe can be used for cpu hotplug. And here we use pl061. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Wei Huang <wei@redhat.com> Tested-by: Wei Huang <wei@redhat.com> Message-id: 1449804086-3464-4-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-10arm: boot: Add secure_board_setup flagPeter Crosthwaite1-0/+6
Add a flag that when set, will cause the primary CPU to start in secure mode, even if the overall boot is non-secure. This is useful for when there is a board-setup blob that needs to run from secure mode, but device and secondary CPU init should still be done as-normal for a non- secure boot. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: d1170774d5446d715fced7739edfc61a5be931f9.1447007690.git.crosthwaite.peter@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-06arm: allwinner-a10: Add SATAPeter Crosthwaite1-0/+4
Add the Allwinner A10 AHCI controller module to the SoC. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 69d6962f2d14a218bd07e9ac4ccd1947737cc30f.1445917756.git.crosthwaite.peter@gmail.com Signed-off-by: John Snow <jsnow@redhat.com>
2015-11-03armv7-m: Return DeviceState* from armv7m_init()Michael Davidsaver1-1/+1
Change armv7m_init to return the DeviceState* for the NVIC. This allows access to all GPIO blocks, not just the IRQ inputs. Move qdev_get_gpio_in() calls out of armv7m_init() into board code for stellaris and stm32f205 boards. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03arm: boot: Add board specific setup code APIPeter Crosthwaite1-0/+10
Add an API for boards to inject their own preboot software (or firmware) sequence. The software then returns to the bootloader via the link register. This allows boards to do their own little bits of firmware setup without needed to replace the bootloader completely (which is the requirement for existing firmware support). The blob is loaded by a callback if and only if doing a linux boot (similar to the existing write_secondary support). Rewrite the comment for the primary boot blob. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 070295644c6ac84696d743913296e8cfefb48c15.1446182614.git.crosthwaite.peter@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-29target-arm: xlnx-zynqmp: Add sdhci support.Sai Pavan Boddu1-0/+3
Add two SYSBUS_SDHCI devices for xlnx-zynqmp Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-09-24hw/arm/virt: Add gic-version option to virt machinePavel Fedin2-1/+4
Add gic_version to VirtMachineState, set it to value of the option and pass it around where necessary. Instantiate devices and fdt nodes according to the choice. max_cpus for virt machine increased to 123 (calculated from redistributor space available in the memory map). GICv2 compatibility check happens inside arm_gic_common_realize(). ITS region is added to the memory map too, however currently it not used, just reserved. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Tested-by: Ashok kumar <ashoks@broadcom.com> [PMM: Added missing cpu_to_le* calls, thanks to Shannon Zhao] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14i.MX: Add GPIO devices to i.MX25 SOCJean-Christophe Dubois1-0/+15
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 2eb129ba8713aedfe877eaa3d8de80061d880fbb.1441828793.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14i.MX: Add GPIO devices to i.MX31 SOCJean-Christophe Dubois1-0/+12
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 60b67c9a8b948159f4b4163ead86fbf701c011c6.1441828793.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14arm: xlnx-zynqmp: Fix up GIC region sizeNathan Rossi1-1/+1
The GIC in ZynqMP cover a 64K address space, however the actual registers are decoded within a 4K address space and mirrored at the 4K boundaries. This change fixes the defined size for these regions as it was set to 0x4000/16K incorrectly. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1441719672-25296-1-git-send-email-nathan@nathanrossi.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-08xlnx-zynqmp: Connect the sysbus AHCI to ZynqMPAlistair Francis1-0/+3
Connect the Sysbus AHCI device to ZynqMP. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Sai Pavan Boddu <saipava@xilinx.com> [PMM: removed unnecessary brackets in error_propagate call] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-08hw/arm: new interface for devices which need to behave differently for ↵Peter Maydell1-0/+43
kernel boot For ARM we have a little minimalist bootloader in hw/arm/boot.c which takes the place of firmware if we're directly booting a Linux kernel. Unfortunately a few devices need special case handling in this situation to do the initialization which on real hardware would be done by firmware. (In particular if we're booting a kernel in NonSecure state then we need to make a TZ-aware GIC put all its interrupts into Group 1, or the guest will be unable to use them.) Create a new QOM interface which can be implemented by devices which need to do something different from their default reset behaviour. The callback will be called after machine initialization and before first reset. Suggested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1441383782-24378-3-git-send-email-peter.maydell@linaro.org
2015-09-07i.MX: Add i2C devices to i.MX31 SOCJean-Christophe Dubois1-0/+11
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: fb20e6bf5cf946c4530b2cfb55c7e37f5a0fc051.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add qtest support for I2C device emulator.Jean-Christophe Dubois1-0/+1
This is using a ds1338 RTC chip on the I2C bus. This RTC chip is not present on the real 3DS PDK board. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Acked-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 05601683a2a95c881cbc9f22651a044d969bd0ae.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add SOC support for i.MX25Jean-Christophe Dubois1-0/+234
For now we support the following devices: * CPU: ARM926 * Interrupt Controller: AVIC * CCM * UART x 5 * EPIT x 2 * GPT x 4 * FEC * I2C x 3 Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 62218bfa90f9101f79098e768c3d58bd92dcb7f3.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: KZM: use standalone i.MX31 SOC supportJean-Christophe Dubois1-26/+0
Convert the KZM board to use the i.MX31 SoC defintition instead of redefining the entire SoC on the machine level. Major rewrite of the machine init code. While touching the memory map comment de-indent to the correct level of indentation. This obsoletes the legacy i.MX device device creation helpers which are removed. Tested by booting a minimal Linux system on the emulated platform Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 5e783561f092e1c939562fdff001f1ab1194b07f.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add SOC support for i.MX31Jean-Christophe Dubois1-0/+98
For now we support the following devices: * CPU: ARM1136 * Interrupt Controller: AVIC * CCM * UART x 2 * EPIT x 2 * GPT Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: f146d819594e41568daec42a1d0f440cdfe3df76.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07hw/arm/virt: Add high MMIO PCI region, 512G in sizePavel Fedin2-0/+2
This large region is necessary for some devices like ivshmem and video cards 32-bit kernels can be built without LPAE support. In this case such a kernel will not be able to use PCI controller which has windows in high addresses. In order to work around the problem, "highmem" option is introduced. It defaults to on on, but can be manually set to off in order to be able to run those old 32-bit guests. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> [PMM: Added missing ULL suffixes and a comment to the a15memmap[] entry] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-25xlnx-zynqmp: Connect the four OCM banksAlistair Francis1-0/+6
The Xilinx EP108 has four separate OCM banks which are located adjacent to each other. This patch adds the four banks to the ZynqMP SoC. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: afa6ba31163a5d541a0bef4b0dc11f2597e0c495.1436813543.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13i.MX: Split CCM emulator in a header file and a source fileJean-Christophe Dubois1-10/+2
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: b1d6f990229b2608bbaba24f4ff359571c0b07da.1437080501.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-05 12:58:06 +0000