summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2014-02-27sun4m: Set HostID in NVRAMMark Cave-Ayland1-0/+2
On SparcStations, the HostID field in the NVRAM is equal to the last three bytes of the MAC address (which is also stored in the NVRAM). This constant is used as an identification/serial number on Solaris. Signed-off-by: Olivier Danet <odanet@caramail.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2014-02-27s390x/event-facility: code restructureHeinz Graalfs2-24/+19
Code restructure in order to simplify class hierarchy - remove S390SCLPDevice abstract base class and move function pointers into new SCLPEventFacilityClass - implement SCLPEventFacility as SysBusDevice - use define constants for instance creation strings The following ascii-art shows the class structure wrt the SCLP EventFacility before (CURRENT) and after the restructure (NEW): ---- CURRENT: "s390-sclp-events-bus" +-------------------------+ | SCLPEventsBus | |-------------------------| |BusState qbus | +-------------------------+ +-------------------------+ | SCLPEventFacility | - to be replaced by new SCLPEventFacility, |-------------------------| which will be a SysBusDevice |SCLPEventsBus sbus | |DeviceState *qdev | |unsigned int receive_mask| +-------------------------+ +-------------------------+ | S390SCLPDeviceClass | - to be replaced by new SCLPEventFacilityClass |-------------------------| |DeviceClass qdev | |*(init)() | +-------------------------+ "s390-sclp-event-facility" | instance-of | V "s390-sclp-device" - this is an abstract class +-------------------------+ | S390SCLPDevice (A)| - to be replaced by new SCLPEventFacility |-------------------------| |SysBusDevice busdev | |SCLPEventFacility *ef | | | |*(sclp_command_handler)()| - these 2 go to new SCLPEventFacilityClass |*(event_pending)() | +-------------------------+ ---- NEW: "s390-sclp-events-bus" +-------------------------+ | SCLPEventsBus | |-------------------------| |BusState qbus | +-------------------------+ +-------------------------+ | SCLPEventFacilityClass | |-------------------------| |DeviceClass parent_class | | | |*(init)() | |*(command_handler)() | |*(event_pending)() | +-------------------------+ "s390-sclp-event-facility" +-------------------------+ | SCLPEventFacility | |-------------------------| |SysBusDevice parent_class| |SCLPEventsBus sbus | |unsigned int receive_mask| +-------------------------+ Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-27s390x/kvm: implement floating-interrupt controller deviceJens Freimann1-0/+33
This patch implements a floating-interrupt controller device (flic) which interacts with the s390 flic kvm_device. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-26Merge remote-tracking branch ↵Peter Maydell3-2/+37
'remotes/pmaydell/tags/pull-target-arm-20140226' into staging target-arm queue: * fixes for various Coverity-spotted bugs * support new KVM device control API for VGIC * support KVM VGIC save/restore/migration * more AArch64 system mode foundations * support ARMv8 CRC instructions for A32/T32 * PL330 minor fixes and cleanup # gpg: Signature made Wed 26 Feb 2014 17:51:32 GMT using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-target-arm-20140226: (45 commits) dma/pl330: implement dmaadnh instruction dma/pl330: Fix buffer depth dma/pl330: Add event debugging printfs dma/pl330: Rename parent_obj dma/pl330: printf format type sweep. dma/pl330: Fix misleading type dma/pl330: Delete overly verbose debug printf target-arm: Add support for AArch32 ARMv8 CRC32 instructions include/qemu/crc32c.h: Rename include guards to match filename target-arm: Add utility function for checking AA32/64 state of an EL target-arm: Implement AArch64 view of CPACR target-arm: A64: Implement MSR (immediate) instructions target-arm: Store AIF bits in env->pstate for AArch32 target-arm: A64: Implement WFI target-arm: Get MMU index information correct for A64 code target-arm: Implement AArch64 OSLAR_EL1 sysreg as WI target-arm: Implement AArch64 dummy breakpoint and watchpoint registers target-arm: Implement AArch64 ID and feature registers target-arm: Implement AArch64 generic timers target-arm: Implement AArch64 MPIDR ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20140225' ↵Peter Maydell1-1/+1
into staging migration/next for 20140225 # gpg: Signature made Tue 25 Feb 2014 14:04:31 GMT using RSA key ID 5872D723 # gpg: Can't check signature: public key not found * remotes/juanquintela/tags/migration/20140225: rdma: rename 'x-rdma' => 'rdma' Fix two XBZRLE corruption issues Fix vmstate_info_int32_le comparison/assign qemu_file: use fwrite() correctly Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into ↵Peter Maydell2-6/+19
staging Net patches # gpg: Signature made Tue 25 Feb 2014 13:32:33 GMT using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/net-pull-request: virtio-net: use qemu_get_queue() where possible vhost_net: use offload API instead of bypassing it net: remove implicit peer from offload API net: Disable netmap backend when not supported net: add offloading support to netmap backend net: make tap offloading callbacks static net: virtio-net and vmxnet3 use offloading API net: TAP uses NetClientInfo offloading callbacks net: extend NetClientInfo for offloading net: change vnet-hdr TAP prototypes opencores_eth: flush queue whenever can_receive can go from false to true Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26include/qemu/crc32c.h: Rename include guards to match filenameWill Newton1-2/+2
Signed-off-by: Will Newton <will.newton@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393411566-24104-2-git-send-email-will.newton@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26arm: vgic device control api supportChristoffer Dall1-0/+1
Support creating the ARM vgic device through the device control API and setting the base address for the distributor and cpu interfaces in KVM VMs using this API. Because the older KVM_CREATE_IRQCHIP interface needs the irq chip to be created prior to creating the VCPUs, we first test if we can use the device control API in kvm_arch_irqchip_create (using the test flag from the device control API). If we cannot, it means we have to fall back to KVM_CREATE_IRQCHIP and use the older ioctl at this point in time. If however, we can use the device control API, we don't do anything and wait until the arm_gic_kvm driver initializes and let that use the device control API. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1392687720-26806-5-git-send-email-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26kvm: Common device control API functionsChristoffer Dall1-0/+22
Introduces two simple functions: int kvm_device_ioctl(int fd, int type, ...); int kvm_create_device(KVMState *s, uint64_t type, bool test); These functions wrap the basic ioctl-based interactions with KVM in a way similar to other KVM ioctl wrappers. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1392687720-26806-4-git-send-email-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26kvm: Introduce kvm_arch_irqchip_createChristoffer Dall1-0/+12
Introduce kvm_arch_irqchip_create an arch-specific hook in preparation for architecture-specific use of the device control API to create IRQ chips. Following patches will implement the ARM irqchip create method to prefer the device control API over the older KVM_CREATE_IRQCHIP API. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1392687720-26806-3-git-send-email-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26xilinx: Delete hw/include/xilinx.hPeter Crosthwaite1-10/+0
This is now obsolete - remove the header and all its inclusions. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-26xilinx: Inline usages of xilinx_axi*_init()Peter Crosthwaite1-33/+0
Inline the only usage of each of xilinx_axiethernet_init and xilinx_axidma_init. Converts this init to at least a semi-recent QOM styling. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-26xilinx: Inline usage of xilinx_ethlite_create()Peter Crosthwaite1-19/+0
Inline the only usage. Converts this init to at least a semi-recent QOM styling. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-26xilinx: Inline usages of xilinx_timer_create()Peter Crosthwaite1-15/+0
Inline these usages. Converts these init to at least a semi-recent QOM styling. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-26xilinx: Inline usages of xilinx_intc_create()Peter Crosthwaite1-13/+0
Inline these usages. Converts these init to at least a semi-recent QOM styling. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-25net: remove implicit peer from offload APIStefan Hajnoczi1-7/+7
The virtio_net offload APIs are used on the NIC's peer (i.e. the tap device). The API was defined to implicitly use nc->peer, saving the caller the trouble. This wasn't ideal because: 1. There are callers who have the peer but not the NIC. Currently they are forced to bypass the API and access peer->info->... directly. 2. The rest of the net.h API uses nc, not nc->peer, so it is inconsistent. This patch pushes nc->peer back up to callers. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25Fix two XBZRLE corruption issuesDr. David Alan Gilbert1-1/+1
Push zero'd pages into the XBZRLE cache A page that was cached by XBZRLE, zero'd and then XBZRLE'd again was being compared against a stale cache value Don't use 'qemu_put_buffer_async' to put pages from the XBZRLE cache Since the cache might change before the data hits the wire Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-02-25net: make tap offloading callbacks staticVincenzo Maffione1-6/+0
Since TAP offloadings are manipulated through a new API, it's not necessary to export them in include/net/tap.h anymore. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25net: extend NetClientInfo for offloadingVincenzo Maffione1-0/+19
Some new callbacks have been added to generalize the operations done by virtio-net and vmxnet3 frontends to manipulate TAP offloadings. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25net: change vnet-hdr TAP prototypesVincenzo Maffione1-2/+2
The tap_has_vnet_hdr() and tap_has_vnet_hdr_len() functions used to return int, even though they only return true/false values. This patch changes the prototypes to return bool. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-25Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell5-12/+13
Block patches # gpg: Signature made Fri 21 Feb 2014 21:42:24 GMT using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: (54 commits) iotests: Mixed quorum child device specifications quorum: Simplify quorum_open() quorum: Add unit test. quorum: Add quorum_open() and quorum_close(). quorum: Implement recursive .bdrv_recurse_is_first_non_filter in quorum. quorum: Add quorum_co_flush(). quorum: Add quorum_invalidate_cache(). quorum: Add quorum_getlength(). quorum: Add quorum mechanism. quorum: Add quorum_aio_readv. blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify. quorum: Add quorum_aio_writev and its dependencies. quorum: Create BDRVQuorumState and BlkDriver and do init. quorum: Create quorum.c, add QuorumChildRequest and QuorumAIOCB. check-qdict: Test termination of qdict_array_split() check-qdict: Adjust test for qdict_array_split() qdict: Extract non-QDicts in qdict_array_split() qemu-config: Sections must consist of keys qemu-iotests: Check qemu-img command line parsing qemu-img: Allow -o help with incomplete argument list ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-24Merge remote-tracking branch 'remotes/sstabellini/xen-140220' into stagingPeter Maydell1-0/+1
* remotes/sstabellini/xen-140220: xen_disk: fix io accounting Call pci_piix3_xen_ide_unplug from unplug_disks Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-24Merge remote-tracking branch 'remotes/bonzini/configure' into stagingPeter Maydell3-2/+32
* remotes/bonzini/configure: build: softmmu targets do not have a "main.o" file configure: Disable libtool if -fPIE does not work with it (bug #1257099) block: convert block drivers linked with libs to modules Makefile: introduce common-obj-m and block-obj-m for DSO Makefile: install modules with "make install" module: implement module loading rules.mak: introduce DSO rules darwin: do not use -mdynamic-no-pic block: use per-object cflags and libs rules.mak: allow per object cflags and libs rules.mak: fix $(obj) to a real relative path util: Split out exec_dir from os_find_datadir Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-22scsi: report thin provisioning errors with werror=reportPaolo Bonzini1-0/+2
SCSI defines a status code for when a thin-provisioned LUNs would exceed the allocated space, map ENOSPC to it. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-22scsi: Change scsi sense buf size to 252Fam Zheng1-1/+1
Current buffer size fails the assersion check in like hw/scsi/scsi-bus.c:1655: assert(req->sense_len <= sizeof(req->sense)); when backend (block/iscsi.c) returns more data then 96. Exercise the core dump path by booting an Gentoo ISO with scsi-generic device backed with iscsi (built with libiscsi 1.7.0): x86_64-softmmu/qemu-system-x86_64 \ -drive file=iscsi://localhost:3260/iqn.foobar/0,if=none,id=drive-disk \ -device virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x6 \ -device scsi-generic,drive=drive-disk,bus=scsi1.0,id=iscsi-disk \ -boot d \ -cdrom gentoo.iso qemu-system-x86_64: hw/scsi/scsi-bus.c:1655: scsi_req_complete: Assertion `req->sense_len <= sizeof(req->sense)' failed. According to SPC-4, section 4.5.2.1, 252 is the limit of sense data. So increase the value to fix it. Also remove duplicated define for the macro. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-21quorum: Add quorum mechanism.Benoît Canet1-0/+2
This patchset enables the core of the quorum mechanism. The num_children reads are compared to get the majority version and if this version exists more than threshold times the guest won't see the error at all. If a block is corrupted or if an error occurs during an IO or if the quorum cannot be established QMP events are used to report to the management. Use gnutls's SHA-256 to compare versions. --enable-quorum must be used to enable the feature. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify.Benoît Canet1-0/+2
qemu_iovec_compare() will be used to compare IOs vectors in quorum blkverify mode. The patch extracts these functions in order to factorize the code. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21qemu-option: has_help_option() and is_valid_option_list()Kevin Wolf1-0/+2
has_help_option() checks if any help option ('help' or '?') occurs anywhere in an option string, so that things like 'cluster_size=4k,help' are recognised. is_valid_option_list() ensures that the option list doesn't have options with leading commas or trailing unescaped commas. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21nbd: move socket wrappers to qemu-nbdPaolo Bonzini1-4/+0
qemu-nbd is one of the few valid users of qerror_report_err. Move the error-reporting socket wrappers there. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21nbd: inline tcp_socket_incoming_spec into sole callerPaolo Bonzini1-1/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21nbd: correctly propagate errorsPaolo Bonzini1-1/+0
Before: $ ./qemu-io-old qemu-io-old> open -r -o file.driver=nbd one of path and host must be specified. qemu-io-old: can't open device (null): Could not open image: Invalid argument $ ./qemu-io-old qemu-io-old> open -r -o file.driver=nbd,file.host=foo,file.path=bar path and host may not be used at the same time. qemu-io-old: can't open device (null): Could not open image: Invalid argument After: $ ./qemu-io qemu-io> open -r -o file.driver=nbd qemu-io: can't open device (null): one of path and host must be specified. $ ./qemu-io qemu-io> open -r -o file.driver=nbd,file.host=foo,file.path=bar qemu-io: can't open device (null): path and host may not be used at the same time. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21block: Remove bdrv_open_image()'s force_raw optionMax Reitz1-1/+1
This option is now unnecessary since specifying BDRV_O_PROTOCOL as flag will do exactly the same. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21block: Make bdrv_file_open() staticMax Reitz1-3/+3
Add the bdrv_open() option BDRV_O_PROTOCOL which results in passing the call to bdrv_file_open(). Additionally, make bdrv_file_open() static and therefore bdrv_open() the only way to call it. Consequently, all existing calls to bdrv_file_open() have to be adjusted to use bdrv_open() with the BDRV_O_PROTOCOL flag instead. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21block: Add reference parameter to bdrv_open()Max Reitz1-2/+3
Allow bdrv_open() to handle references to existing block devices just as bdrv_file_open() is already capable of. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21block: Change BDS parameter of bdrv_open() to **Max Reitz1-1/+1
Make bdrv_open() take a pointer to a BDS pointer, similarly to bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open() will create a new BDS with an empty name; if the BDS pointer is not NULL, that existing BDS will be reused (in the same way as bdrv_open() already did). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21Merge remote-tracking branch ↵Peter Maydell1-0/+3
'remotes/pmaydell/tags/pull-target-arm-20140220' into staging target-arm queue: * Fix a bug causing an assertion in the NVIC on ARMv7M models * More A64 Neon instructions * Refactor cpreg API to separate out access check functions, as groundwork for AArch64 system mode * Fix bug in linux-user A64 store-exclusive of XZR # gpg: Signature made Thu 20 Feb 2014 11:12:57 GMT using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-target-arm-20140220: (30 commits) linux-user: AArch64: Fix exclusive store of the zero register target-arm: A64: Implement unprivileged load/store target-arm: A64: Implement narrowing three-reg-diff operations target-arm: A64: Implement the wide 3-reg-different operations target-arm: A64: Add most remaining three-reg-diff widening ops target-arm: A64: Add opcode comments to disas_simd_three_reg_diff target-arm: A64: Implement store-exclusive for system mode target-arm: Fix incorrect type for value argument to write_raw_cp_reg target-arm: Remove failure status return from read/write_raw_cp_reg target-arm: Remove unnecessary code now read/write fns can't fail target-arm: Drop success/fail return from cpreg read and write functions target-arm: Convert miscellaneous reginfo structs to accessfn target-arm: Convert generic timer reginfo to accessfn target-arm: Convert performance monitor reginfo to accessfn target-arm: Split cpreg access checks out from read/write functions target-arm: Stop underdecoding ARM946 PRBS registers target-arm: Log bad system register accesses with LOG_UNIMP target-arm: Remove unused ARMCPUState sr substruct target-arm: Restrict check_ap() use of S and R bits to v6 and earlier target-arm: Define names for SCTLR bits ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-20Call pci_piix3_xen_ide_unplug from unplug_disksStefano Stabellini1-0/+1
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-20Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-3' into stagingPeter Maydell1-0/+5
- xhci improvements and fixes. - uhci bugfix. - cleanups. # gpg: Signature made Tue 18 Feb 2014 15:48:10 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-usb-3: xhci: use DPRINTF() instead of fprintf(stderr, ...) xhci: switch debug printf to tracepoint xhci iso: allow for some latency xhci iso: fix time calculation uhci: invalidate queue on device address changes xhci: fix overflow in usb_xhci_post_load usb: Remove magic constants from device bmAttributes Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-20Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' ↵Peter Maydell19-62/+123
into staging QOM infrastructure fixes and device conversions * QTest cleanups and test cases for PCI NICs * NAND fix for "info qtree" * Cleanup and extension of QOM machine tests * IndustryPack test cases and conversion to QOM realize * I2C cleanups * Cleanups of legacy qdev properties # gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/qom-devices-for-peter: (49 commits) qtest: Include system headers before user headers qapi: Refine human printing of sizes qdev: Use QAPI type names for properties qdev: Add enum property types to QAPI schema block: Handle "rechs" and "large" translation options qdev: Remove hex8/32/64 property types qdev: Remove most legacy printers qdev: Use human mode in "info qtree" qapi: Add human mode to StringOutputVisitor qdev: Inline qdev_prop_parse() qdev: Legacy properties are just strings qdev: Legacy properties are now read-only qdev: Remove legacy parsers for hex8/32/64 qdev: Sizes are now parsed by StringInputVisitor qapi: Add size parser to StringInputVisitor qtest: Don't segfault with invalid -qtest option ipack: Move IndustryPack out of hw/char/ ipoctal232: QOM parent field cleanup ipack: QOM parent field cleanup for IPackDevice ipack: QOM parent field cleanup for IPackBus ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-20module: implement module loadingFam Zheng1-1/+22
This patch adds loading, stamp checking and initialization of modules. The init function of dynamic module is no longer directly called as __attribute__((constructor)) in static linked version, it is called only after passed the checking of presense of stamp symbol: qemu_stamp_$RELEASEHASH where $RELEASEHASH is generated by hashing version strings and content of configure script. With this, modules built from a different tree/version/configure will not be loaded. The module loading code requires gmodule-2.0. Modules are searched under - CONFIG_MODDIR - executable folder (to allow running qemu-{img,io} in the build directory) - ../ of executable folder (to allow running system emulator in the build directory) Modules are linked under their subdir respectively, then copied to top level of build directory for above convinience, e.g.: $(BUILD_DIR)/block/curl.so -> $(BUILD_DIR)/block-curl.so Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-20util: Split out exec_dir from os_find_datadirFam Zheng2-1/+10
With this change, main() calls qemu_init_exec_dir and uses argv[0] to init exec_dir. The saved value can be retrieved with qemu_get_exec_dir later. It will be reused by module loading. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-20softfloat: Support halving the result of muladd operationPeter Maydell1-0/+3
The ARMv8 instruction set includes a fused floating point reciprocal square root step instruction which demands an "(x * y + z) / 2" fused operation. Support this by adding a flag to the softfloat muladd operations which requests that the result is halved before rounding. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-18usb: Remove magic constants from device bmAttributesPantelis Koukousoulas1-0/+5
Replace magic constants in device bmAttributes with symbolic ones from Linux kernel ch9.h Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-02-15net: declare struct iovec in checksum.h to fix compiler warningMichael Tokarev1-0/+1
The checksum calculation header exports a function that refers to struct iov defined in iov.h. Without including the former, build fails like this: In file included from hw/net/fsl_etsec/rings.c:24:0: include/net/checksum.h:51:31: error: ‘struct iovec’ declared inside parameter list [-Werror] include/net/checksum.h:51:31: error: its scope is only this definition or declaration, which is probably not what you want [-Werror] Mention struct iovec there. Reported-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-14qdev: Add enum property types to QAPI schemaPaolo Bonzini2-14/+0
Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14qdev: Remove hex8/32/64 property typesPaolo Bonzini2-10/+1
Replace them with uint8/32/64. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14qapi: Add human mode to StringOutputVisitorPaolo Bonzini2-2/+3
This will be used by "info qtree". For numbers it prints both the decimal and hex values. For sizes it rounds to the nearest power of 2^10. For strings, it puts quotes around the string and separates NULL and empty string. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14qdev: Inline qdev_prop_parse()Paolo Bonzini1-2/+0
Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14qdev: Legacy properties are now read-onlyPaolo Bonzini1-1/+0
Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14qtest: Don't segfault with invalid -qtest optionFam Zheng1-1/+2
This prints an error message, instead of core dump, when "-qtest" option value is invalid, e.g.: $ ./x86_64-softmmu/qemu-system-x86_64 -qtest unknown qemu-system-x86_64: Failed to initialize device for qtest: "unknown" Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-02 00:03:25 +0000