summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2016-10-26tcg: Add atomic128 helpersRichard Henderson1-0/+6
Force the use of cmpxchg16b on x86_64. Wikipedia suggests that only very old AMD64 (circa 2004) did not have this instruction. Further, it's required by Windows 8 so no new cpus will ever omit it. If we truely care about these, then we could check this at startup time and then avoid executing paths that use it. Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-10-26tcg: Add EXCP_ATOMICRichard Henderson3-0/+3
When we cannot emulate an atomic operation within a parallel context, this exception allows us to stop the world and try again in a serial context. Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-10-26int128: Add int128_make128Richard Henderson1-5/+15
Allows Int128 to be used more generally, rather than having to begin with 64-bit inputs and accumulate. Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-10-26int128: Use __int128 if availableRichard Henderson1-1/+134
Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-10-26exec: Avoid direct references to Int128 partsRichard Henderson1-0/+10
Reviewed-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-10-26atomics: Add __nocheck atomic operationsRichard Henderson1-9/+27
While the check against sizeof(void *) is appropriate for normal usage within qemu, there are places in which we want wider operaions and have checked for their existance. Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-10-26atomics: add atomic_op_fetch variantsEmilio G. Cota1-0/+17
This paves the way for upcoming work. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1467054136-10430-9-git-send-email-cota@braap.org>
2016-10-26atomics: add atomic_xorEmilio G. Cota1-0/+4
This paves the way for upcoming work. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1467054136-10430-8-git-send-email-cota@braap.org>
2016-10-26atomics: Add parameters to macrosRichard Henderson1-5/+5
Making these functional rather than object macros will prevent later problems with complex macro expansion. Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-10-25qdict: implement a qdict_crumple method for un-flattening a dictDaniel P. Berrange1-0/+1
The qdict_flatten() method will take a dict whose elements are further nested dicts/lists and flatten them by concatenating keys. The qdict_crumple() method aims to do the reverse, taking a flat qdict, and turning it into a set of nested dicts/lists. It will apply nesting based on the key name, with a '.' indicating a new level in the hierarchy. If the keys in the nested structure are all numeric, it will create a list, otherwise it will create a dict. If the keys are a mixture of numeric and non-numeric, or the numeric keys are not in strictly ascending order, an error will be reported. As an example, a flat dict containing { 'foo.0.bar': 'one', 'foo.0.wizz': '1', 'foo.1.bar': 'two', 'foo.1.wizz': '2' } will get turned into a dict with one element 'foo' whose value is a list. The list elements will each in turn be dicts. { 'foo': [ { 'bar': 'one', 'wizz': '1' }, { 'bar': 'two', 'wizz': '2' } ], } If the key is intended to contain a literal '.', then it must be escaped as '..'. ie a flat dict { 'foo..bar': 'wizz', 'bar.foo..bar': 'eek', 'bar.hello': 'world' } Will end up as { 'foo.bar': 'wizz', 'bar': { 'foo.bar': 'eek', 'hello': 'world' } } The intent of this function is that it allows a set of QemuOpts to be turned into a nested data structure that mirrors the nesting used when the same object is defined over QMP. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1475246744-29302-3-git-send-email-berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Parameter recursive dropped along with its tests; whitespace style touched up] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-25qapi: rename QmpOutputVisitor to QObjectOutputVisitorDaniel P. Berrange1-2/+2
The QmpOutputVisitor has no direct dependency on QMP. It is valid to use it anywhere that one wants a QObject. Rename it to better reflect its functionality as a generic QAPI to QObject converter. The commit before previous renamed the files, this one renames C identifiers. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1475246744-29302-6-git-send-email-berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Split into file rename and identifier rename] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-25qapi: rename QmpInputVisitor to QObjectInputVisitorDaniel P. Berrange1-2/+2
The QmpInputVisitor has no direct dependency on QMP. It is valid to use it anywhere that one has a QObject. Rename it to better reflect its functionality as a generic QObject to QAPI converter. The previous commit renamed the files, this one renames C identifiers. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1475246744-29302-5-git-send-email-berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Straightforwardly rebased, split into file and identifier rename] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-25qapi: rename *qmp-*-visitor* to *qobject-*-visitor*Daniel P. Berrange3-9/+9
The QMP visitors have no direct dependency on QMP. It is valid to use them anywhere that one has a QObject. Rename them to better reflect their functionality as a generic QObject to QAPI converter. This is the first of three parts: rename the files. The next two parts will rename C identifiers. The split is necessary to make git rename detection work. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Split into file and identifier rename, two comments touched up] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-25Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into ↵Peter Maydell6-4/+37
staging x86 and CPU queue, 2016-10-24 x2APIC support to APIC code, cpu_exec_init() refactor on all architectures, and other x86 changes. # gpg: Signature made Mon 24 Oct 2016 20:51:14 BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-pull-request: exec: call cpu_exec_exit() from a CPU unrealize common function exec: move cpu_exec_init() calls to realize functions exec: split cpu_exec_init() pc: q35: Bump max_cpus to 288 pc: Require IRQ remapping and EIM if there could be x2APIC CPUs pc: Add 'etc/boot-cpus' fw_cfg file for machine with more than 255 CPUs Increase MAX_CPUMASK_BITS from 255 to 288 pc: Clarify FW_CFG_MAX_CPUS usage comment pc: kvm_apic: Pass APIC ID depending on xAPIC/x2APIC mode pc: apic_common: Reset APIC ID to initial ID when switching into x2APIC mode pc: apic_common: Restore APIC ID to initial ID on reset pc: apic_common: Extend APIC ID property to 32bit pc: Leave max apic_id_limit only in legacy cpu hotplug code acpi: cphp: Force switch to modern cpu hotplug if APIC ID > 254 pc: acpi: x2APIC support for SRAT table pc: acpi: x2APIC support for MADT table and _MAT method Conflicts: target-arm/cpu.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24exec: call cpu_exec_exit() from a CPU unrealize common functionLaurent Vivier1-1/+1
As cpu_exec_exit() mirrors the cpu_exec_realizefn(), rename it as cpu_exec_unrealizefn(). Create and register a cpu_common_unrealizefn() function for the CPU device class and call cpu_exec_unrealizefn() from this function. Remove cpu_exec_exit() from cpu_common_finalize() (which mirrors init, not realize), and as x86_cpu_unrealizefn() and ppc_cpu_unrealizefn() overwrite the device class unrealize function, add a call to a parent_unrealize pointer. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24exec: move cpu_exec_init() calls to realize functionsLaurent Vivier2-1/+1
Modify all CPUs to call it from XXX_cpu_realizefn() function. Remove all the cannot_destroy_with_object_finalize_yet as unsafe references have been moved to cpu_exec_realizefn(). (tested with QOM command provided by commit 4c315c27) for arm: Setting of cpu->mp_affinity is moved from arm_cpu_initfn() to arm_cpu_realizefn() as setting of cpu_index is now done in cpu_exec_realizefn(). To avoid to overwrite an user defined value, we set it to an invalid value by default, and update it in realize function only if the value is still invalid. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24exec: split cpu_exec_init()Laurent Vivier1-0/+1
Put in cpu_exec_initfn() what initializes the CPU, and leave in cpu_exec_init() what adds it to the environment. As cpu_exec_initfn() is called by all XX_cpu_initfn(), call it directly in cpu_common_initfn(). cpu_exec_init() is now a realize function, it will be renamed to cpu_exec_realizefn() and moved to the XX_cpu_realizefn() function in a following patch. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24pc: Add 'etc/boot-cpus' fw_cfg file for machine with more than 255 CPUsIgor Mammedov1-0/+2
Currently firmware uses 1 byte at 0x5F offset in RTC CMOS to get number of CPUs present at boot. However 1 byte is not enough to handle more than 255 CPUs. So add a new fw_cfg file that would allow QEMU to tell it. For compat reasons add file only for machine types that support more than 255 CPUs. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24Increase MAX_CPUMASK_BITS from 255 to 288Igor Mammedov1-1/+1
so that it would be possible to increase maxcpus limit for x86 target. Keep spapr/virt_arm at limit they used to have 255. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24pc: apic_common: Extend APIC ID property to 32bitIgor Mammedov1-1/+2
ACPI ID is 32 bit wide on CPUs with x2APIC support. Extend 'id' property to support it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24pc: acpi: x2APIC support for SRAT tableIgor Mammedov1-0/+11
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24pc: acpi: x2APIC support for MADT table and _MAT methodIgor Mammedov1-0/+18
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24Merge remote-tracking branch ↵Peter Maydell6-4/+117
'remotes/pmaydell/tags/pull-target-arm-20161024' into staging target-arm queue: * support variable (runtime-determined) page sizes, for a nearly-20% speedup of TCG for ARMv7 and v8 CPUs with 4K pages * ptimer: add tests, support more flexible behaviour around what happens on the "zero" tick, use ptimer for a9gtimer * virt: ACPI: Add IORT Structure definition * i2c: Fix SMBus read transactions to avoid double events * timer: stm32f2xx_timer: add check for prescaler value * QOMify musicpal, pxa2xx_gpio, strongarm, pl110 * target-arm: Implement new HLT trap for semihosting * i2c: Add asserts for second smbus i2c_start_transfer() # gpg: Signature made Mon 24 Oct 2016 18:24:17 BST # gpg: using RSA key 0x3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20161024: (32 commits) i2c: Add asserts for second smbus i2c_start_transfer() target-arm: Implement new HLT trap for semihosting hw/display: QOM'ify pl110.c hw/arm: QOM'ify strongarm.c hw/arm: QOM'ify pxa2xx_gpio.c hw/arm: QOM'ify musicpal.c timer: stm32f2xx_timer: add check for prescaler value i2c: Fix SMBus read transactions to avoid double events timer: a9gtimer: remove loop to auto-increment comparator ARM: Virt: ACPI: Build an IORT table with RC and ITS nodes ACPI: Add IORT Structure definition tests: Add tests for the ARM MPTimer arm_mptimer: Convert to use ptimer tests: ptimer: Replace 10000 with 1 tests: ptimer: Change the copyright comment tests: ptimer: Add tests for "no counter round down" policy hw/ptimer: Add "no counter round down" policy tests: ptimer: Add tests for "no immediate reload" policy hw/ptimer: Add "no immediate reload" policy tests: ptimer: Add tests for "no immediate trigger" policy ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24block: More operations for meta dirty bitmapFam Zheng1-0/+3
Callers can create an iterator of meta bitmap with bdrv_dirty_meta_iter_new(), then use the bdrv_dirty_iter_* operations on it. Meta iterators are also counted by bitmap->active_iterators. Also add a couple of functions to retrieve granularity and count. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1476395910-8697-11-git-send-email-jsnow@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-10-24block: BdrvDirtyBitmap serialization interfaceVladimir Sementsov-Ogievskiy1-0/+14
Several functions to provide necessary access to BdrvDirtyBitmap for block-migration.c Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [Add the "finish" parameters. - Fam] Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1476395910-8697-9-git-send-email-jsnow@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-10-24hbitmap: serializationVladimir Sementsov-Ogievskiy1-0/+79
Functions to serialize / deserialize(restore) HBitmap. HBitmap should be saved to linear sequence of bits independently of endianness and bitmap array element (unsigned long) size. Therefore Little Endian is chosen. These functions are appropriate for dirty bitmap migration, restoring the bitmap in several steps is available. To save performance, every step writes only the last level of the bitmap. All other levels are restored by hbitmap_deserialize_finish() as a last step of restoring. So, HBitmap is inconsistent while restoring. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> [Fix left shift operand to 1UL; add "finish" parameter. - Fam] Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1476395910-8697-8-git-send-email-jsnow@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-10-24block: Add two dirty bitmap gettersFam Zheng1-0/+2
For dirty bitmap users to get the size and the name of a BdrvDirtyBitmap. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1476395910-8697-6-git-send-email-jsnow@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-10-24block: Support meta dirty bitmapFam Zheng1-0/+9
The added group of operations enables tracking of the changed bits in the dirty bitmap. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1476395910-8697-5-git-send-email-jsnow@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-10-24HBitmap: Introduce "meta" bitmap to track bit changesFam Zheng1-0/+21
Upon each bit toggle, the corresponding bit in the meta bitmap will be set. Signed-off-by: Fam Zheng <famz@redhat.com> [Amended text inline. --js] Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1476395910-8697-3-git-send-email-jsnow@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-10-24block: Hide HBitmap in block dirty bitmap interfaceFam Zheng2-2/+6
HBitmap is an implementation detail of block dirty bitmap that should be hidden from users. Introduce a BdrvDirtyBitmapIter to encapsulate the underlying HBitmapIter. A small difference in the interface is, before, an HBitmapIter is initialized in place, now the new BdrvDirtyBitmapIter must be dynamically allocated because the structure definition is in block/dirty-bitmap.c. Two current users are converted too. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1476395910-8697-2-git-send-email-jsnow@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-10-24ACPI: Add IORT Structure definitionPrem Mallappa1-0/+68
ACPI Spec 6.0 introduces IO Remapping Table Structure. This patch introduces the definitions required to describe the IO relationship between the PCIe root complex and the ITS. This conforms to: "IO Remapping Table System Software on ARM Platforms", Document number: ARM DEN 0049B, October 2015. Signed-off-by: Prem Mallappa <prem.mallappa@broadcom.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1476707466-14300-2-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24arm_mptimer: Convert to use ptimerDmitry Osipenko1-4/+1
Current ARM MPTimer implementation uses QEMUTimer for the actual timer, this implementation isn't complete and mostly tries to duplicate of what generic ptimer is already doing fine. Conversion to ptimer brings the following benefits and fixes: - Simple timer pausing implementation - Fixes counter value preservation after stopping the timer - Properly handles prescaler != 0 / counter = 0 / load = 0 cases - Code simplification and reduction Bump VMSD to version 3, since VMState is changed and is not compatible with the previous implementation. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 37f378c33bb5a28d5cd71167a6bd5bff5e59cbc3.1475421224.git.digetx@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24hw/ptimer: Add "no counter round down" policyDmitry Osipenko1-0/+4
For most of the timers counter starts to decrement after first period expires. Due to rounding down performed by the ptimer_get_count, it returns counter - 1 for the running timer, so that for the ptimer user it looks like counter gets decremented immediately after running the timer. Add "no counter round down" policy that provides correct behaviour for those timers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Message-id: ef39622d0ebfdc32a0877e59ffdf6910dc3db688.1475421224.git.digetx@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24hw/ptimer: Add "no immediate reload" policyDmitry Osipenko1-0/+4
Immediate counter re-load on setting (or on starting to run with) counter = 0 is a wrong behaviour for some of the timers. Add "no immediate reload" policy that provides correct behaviour for such timers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Message-id: bf9385cd2550ca451d564fa46007688cee3f3d9d.1475421224.git.digetx@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24hw/ptimer: Add "no immediate trigger" policyDmitry Osipenko1-0/+4
Performing trigger on setting (or starting to run with) counter = 0 could be a wrong behaviour for some of the timers, provide "no immediate trigger" policy to maintain correct behaviour for such timers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Message-id: 72c0319cf2ec599f22397b7da280c06c34dc40dd.1475421224.git.digetx@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24hw/ptimer: Add "continuous trigger" policyDmitry Osipenko1-0/+4
Currently, periodic timer that has load = delta = 0 performs trigger on timer reload and stops, printing a "period zero" error message. Introduce new policy that makes periodic timer to continuously trigger with a period interval in case of load = 0. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Message-id: 632b23dd11055d9bd5e338d66b38fac0bd51462e.1475421224.git.digetx@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24hw/ptimer: Add "wraparound after one period" policyDmitry Osipenko1-0/+4
Currently, periodic counter wraps around immediately once counter reaches "0", this is wrong behaviour for some of the timers, resulting in one period being lost. Add new ptimer policy that provides correct behaviour for such timers, so that counter stays with "0" for a one period before wrapping around. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Message-id: f22a670cf1f4be298b31640cb5f4be1df0f20ab6.1475421224.git.digetx@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24cpu: Support a target CPU having a variable page sizePeter Maydell3-0/+28
Support target CPUs having a page size which isn't knownn at compile time. To use this, the CPU implementation should: * define TARGET_PAGE_BITS_VARY * not define TARGET_PAGE_BITS * define TARGET_PAGE_BITS_MIN to the smallest value it might possibly want for TARGET_PAGE_BITS * call set_preferred_target_page_bits() in its realize function to indicate the actual preferred target page size for the CPU (and report any error from it) In CONFIG_USER_ONLY, the CPU implementation should continue to define TARGET_PAGE_BITS appropriately for the guest OS page size. Machines which want to take advantage of having the page size something larger than TARGET_PAGE_BITS_MIN must set the MachineClass minimum_page_bits field to a value which they guarantee will be no greater than the preferred page size for any CPU they create. Note that changing the target page size by setting minimum_page_bits is a migration compatibility break for that machine. For debugging purposes, attempts to use TARGET_PAGE_SIZE before it has been finally confirmed will assert. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-10-24char: remove explicit_be_open from CharDriverStateMarc-André Lureau1-4/+8
It's only used in qmp_chardev_add(), so use a create() argument instead. Also switched to typedef functions for CharDriverParse/CharDriverCreate. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022100951.19562-7-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: replace avail_connectionsMarc-André Lureau1-1/+0
No need to count the users of a CharDriverState, it can rely on the fact of whether there is a CharBackend associated or if there is enough space in the muxer. Simplify and fold chr_mux_new_fe() in qemu_chr_fe_init() since there is a single user now. Also switch from fprintf to raising error instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022100951.19562-5-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: remove unused qemu_chr_fe_eventMarc-André Lureau1-11/+0
I introduced this function in d61b0c9a2f7f, but it isn't used. Furthermore, it was incomplete, as it would need to translate QEMU chr events to Spice port events. (presumably it was used in the follow-up NBD-spice series that was not completed: http://lists.gnu.org/archive/html/qemu-devel/2013-11/msg02024.html) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022100951.19562-4-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: use an enum for CHR_EVENTMarc-André Lureau1-5/+7
This may help to catch unhandled cases, and avoid having to maintain numbering. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022100951.19562-3-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: remove unused CHR_EVENT_FOCUSMarc-André Lureau1-1/+0
Usage has long been removed, since commit f220174de8d9. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022100951.19562-2-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: move fe_open in CharBackendMarc-André Lureau1-1/+1
The fe_open state belongs to front end. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022100951.19562-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: remove explicit_fe_open, use a set_handlers argumentMarc-André Lureau1-2/+4
No need to keep explicit_fe_open around if it affects only a qemu_chr_fe_set_handlers(). Use an additional argument instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: rename chr_close/chr_freeMarc-André Lureau1-1/+1
The function is used to free the backend opaque pointer, let's name it accordingly. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-23-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: move front end handlers in CharBackendMarc-André Lureau1-5/+6
Since the hanlders are associated with a CharBackend, rather than the CharDriverState, it is more appropriate to store in CharBackend. This avoids the handler copy dance in qemu_chr_fe_set_handlers() then mux_chr_update_read_handler(), by storing the CharBackend pointer directly. Also a mux CharDriver should go through mux->backends[focused], since chr->be will stay NULL. Before that, it was possible to call chr->handler by mistake with surprising results, for ex through qemu_chr_be_can_write(), which would result in calling the last set handler front end, not the one with focus. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-22-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: make some qemu_chr_fe skip if no driverMarc-André Lureau1-13/+27
In most cases, front ends do not care about the side effect of CharBackend, so we can simply skip the checks and call the qemu_chr_fe functions even without associated CharDriver. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: replace qemu_chr_claim/release with qemu_chr_fe_init/deinitMarc-André Lureau1-30/+9
Now that all front end use qemu_chr_fe_init(), we can move chardev claiming in init(), and add a function deinit() to release the chardev and cleanup handlers. The qemu_chr_fe_claim_no_fail() for property are gone, since the property will raise an error instead. In other cases, where there is already an error path, an error is raised instead. Finally, other cases are handled by &error_abort in qemu_chr_fe_init(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: fold qemu_chr_set_handlers in qemu_chr_fe_set_handlersMarc-André Lureau1-1/+2
qemu_chr_add_handlers*() have been removed in previous change, so the common qemu_chr_set_handlers() is no longer needed. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-17-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-13 17:39:00 +0000