summaryrefslogtreecommitdiff
path: root/linux-user
AgeCommit message (Collapse)AuthorFilesLines
2014-06-18target-mips: implement UserLocal RegisterPetar Jovanovic2-2/+2
From MIPS documentation (Volume III): UserLocal Register (CP0 Register 4, Select 2) Compliance Level: Recommended. The UserLocal register is a read-write register that is not interpreted by the hardware and conditionally readable via the RDHWR instruction. This register only exists if the Config3-ULRI register field is set. Privileged software may write this register with arbitrary information and make it accessible to unprivileged software via register 29 (ULR) of the RDHWR instruction. To do so, bit 29 of the HWREna register must be set to a 1 to enable unprivileged access to the register. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2014-06-17User mode support for Linux ELF files with no section headerCraig Heffner1-1/+0
In user mode Linux, Qemu currently refuses to load ELF files that do not contain section headers (ehdr->e_shentsize == 0). Since section headers are not required in order to load an ELF file, simply removing the e_shentsize check in elf_check_ehdr() allows ELF binaries with no section headers to be run properly in user mode: Signed-off-by: Craig Heffner <cheffner@tacnetsol.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-17linux-user: Return correct errno for unsupported netlink socketEd Swierk1-1/+1
This fixes "Cannot open audit interface - aborting." when the EAFNOSUPPORT errno differs between the target and host architectures (e.g. mips target and x86_64 host). Signed-off-by: Ed Swierk <eswierk@skyportsystems.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-17linux-user: Don't overrun guest buffer in sched_getaffinityPeter Maydell1-0/+16
If the guest's "long" type is smaller than the host's, then our sched_getaffinity wrapper needs to round the buffer size up to a multiple of the host sizeof(long). This means that when we copy the data back from the host buffer to the guest's buffer there might be more than we can fit. Rather than overflowing the guest's buffer, handle this case by returning EINVAL or ignoring the unused extra space, as appropriate. Note that only guests using the syscall interface directly might run into this bug -- the glibc wrappers around it will always use a buffer whose size is a multiple of 8 regardless of guest architecture. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-17linux-user/uname: Return correct uname string for x86_64Peter Maydell1-3/+1
We were returning the incorrect uname string (with a hyphen, not an underscore) for x86_64. Fix this by removing the x86_64 special case, since the default "just use UNAME_MACHINE" behaviour suffices. This leaves cpu_to_uname_machine() special cases for only those architectures which need to vary the string based on runtime CPU features. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-17linux-user: fix gcc-4.9 compiler error on __{get,put]}_userRiku Voipio1-6/+6
gcc-4.9 finds unused operand: linux-user/syscall.c: In function ‘host_to_target_stat64’: linux-user/qemu.h:301:19: error: right-hand operand of comma expression has no effect [-Werror=unused-value] ((hptr), (x)), 0) Just removing the rh operand is no good, it will error in later: linux-user/main.c: In function ‘arm_kernel_cmpxchg64_helper’: linux-user/qemu.h:330:15: error: void value not ignored as it ought to be __ret = __put_user((x), __hptr); \ Thus, remove setting __ret from __get_user and __put_user, as and set the right hand operand to (void)0 to make it clear that these return never nothing. This commit depends on the signal.c cleanup, to ensure bisectable version history. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Cc: Richard Henderson <rth@twiddle.net>
2014-06-17signal/ppc/do_setcontext remove __get_user return checkRiku Voipio1-2/+1
The last remaining check for return value of __get_user. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Cc: Alexander Graf <agraf@suse.de>
2014-06-17signal/sparc64_set_context: remove __get_user checksRiku Voipio1-9/+3
Remove checks of __get_user and the err variable used to control flow with it. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-17signal/ppc/{save,restore}_user_regs remove __put/get error checksRiku Voipio1-85/+41
As __get_user and __put_user do not return errors, remove the if checks from around them. This allows making the save/restore functions void. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Cc: Alexander Graf <agraf@suse.de>
2014-06-17signal/all/setup_frame remove __put_user checksRiku Voipio1-72/+25
Remove "if(__put_user" checks and their related error paths for all architecture's setup_frame, setup_rt_frame and similar. Remove the unlock_user_struct when the only way to end up there is from failed lock_user_struct. Remove err variable if there are no users for it in the function anymore. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-17signal/all/do_sigreturn - remove __get_user checksRiku Voipio1-41/+18
Remove "if(__get_user" checks and their related error paths for all architecture's do_sigreturn. Remove the unlock_user_struct when the only way to end up there is from failed lock_user_struct. v3: remove unneccesary sigsegv label as suggested by Peter Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-17signal/all/do_sigaltstack remove __get_user value checkRiku Voipio1-4/+5
Access is already checked in the lock_user_struct call before. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-17signal/sparc/restore_fpu_state: removeRiku Voipio1-37/+0
A function never called from anywhere, obviously half-complete. Remove function and if someone wants to complete this, please check the old version out of git history. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-17signal/all: remove return value from restore_sigcontextRiku Voipio1-31/+12
make most implementations of restore_sigcontext void and remove checking it's return value from functions calling restore_sigcontext. The exception is the X86 version of the function that is too different from others to deal in this way, and arm version, to keep possibility of erroring out from failed valid_user_regs. v3: keep arm valid_user_regs for filling in near future. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-17signal/all: remove return value from setup_sigcontextRiku Voipio1-44/+21
Make all implementations of setup_sigcontext void and remove checking it's return value from functions calling setup_sigcontext. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-17signal/all: remove return value from copy_siginfo_to_userRiku Voipio1-19/+9
Since copy_siginfo_to_user always returns 0, make it void and remove any checks for return value from calling functions. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-17signal/x86/setup_frame: __put_user cleanupRiku Voipio1-12/+4
Remove the remaining check for __put_user return value, and all the checks for err variable which isn't set anywhere anymore. No we can only end up in give_sigsegv due to failed lock_user_struct - thus we remove the unlock_user_struct to avoid unlocking a region never locked. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-17signal/all: remove __get/__put_user return value readingRiku Voipio1-370/+364
Remove all the simple cases of reading the return value of __get_user and __put_user. We set err = 0 in sparc versions of do_sigreturn and sparc64_set_context to avoid compile error, but else this patch is just general removal of err |= __get_user ... idiom. v2: remove err variable from target_rt_restore_ucontext Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-16linux-user: Tell guest about big host page sizesAlexander Graf1-1/+1
We tell the guest its page size via AUX vectors. The guest process then uses this page size as information on which boundaries it can mmap() things. However, if the host has a bigger page size granularity than the guest, it can not fulfill these mmap() requests - which falls apart when MAP_FIXED is passed to mmap. So in that case, let the guest know that we're running on a bigger page size granularity than the target would require. This fixes running qemu-ppc (TARGET_PAGE_SIZE=4k) on a 64k page size ppc64 host for me. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-06-16target-ppc: Store Quadword Conditional Drops Size BitTom Musta1-1/+1
The size and register information are encoded into the reserve_info field of CPU state in the store conditional translation code. Specifically, the size is shifted left by 5 bits (see target-ppc/translate.c gen_conditional_store). The user-mode store conditional code erroneously extracts the size by ANDing with a 4 bit mask; this breaks if size >= 16. Eliminate the mask to make the extraction of size mirror its encoding. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Confirm That .bss Pages Are ValidTom Musta1-3/+4
The existing code does a check to ensure that a .bss region is properly mmap'd. When additional mmap is required, the (guest) pages are also validated. However, this code has a bug: when host page size is larger than target page size, it is possible for the .bss pages to already be (host) mapped but the guest .bss pages may not be valid. The check to mmap additional space is separated from the flagging of the target (guest) pages, thus ensuring that both aspects are done properly. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Allow little-endian user mode.Doug Kwan1-1/+7
This allows running PPC64 little-endian in user mode if target is configured that way. In PPC64 LE user mode we set MSR.LE during initialization. Signed-off-by: Doug Kwan <dougkwan@google.com> Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Support little-endian PPC64 in user mode.Doug Kwan2-2/+19
Look at ELF header to determine ABI version on PPC64. This is required for executing the first instruction correctly. Also print correct machine name in uname() system call. Signed-off-by: Doug Kwan <dougkwan@google.com> Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-09target-arm: A64: Implement two-register SHA instructionsPeter Maydell1-0/+2
Implement the two-register SHA instruction group from the optional Crypto Extensions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-10-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: A64: Implement AES instructionsPeter Maydell1-0/+1
Implement the AES instructions from the optional Crypto Extensions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-8-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: A64: Implement CRC instructionsPeter Maydell1-0/+1
Implement the optional A64 CRC instructions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-6-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: A64: Use PMULL feature bit for PMULLPeter Maydell1-1/+1
Now that we have a separate ARM_FEATURE_V8_PMULL bit, use it for the A64 PMULL, not the AES feature bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-09target-arm: add support for v8 VMULL.P64 instructionPeter Maydell1-0/+1
Add support for the VMULL.P64 polynomial 64x64 to 128 bit multiplication instruction in the A32/T32 instruction sets; this is part of the v8 Crypto Extensions. To do this we have to move the neon_pmull_64_{lo,hi} helpers from helper-a64.c into neon_helper.c so they can be used by the AArch32 translator. Inspired-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401386724-26529-4-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: add support for v8 SHA1 and SHA256 instructionsArd Biesheuvel1-0/+2
This adds support for the SHA1 and SHA256 instructions that are available on some v8 implementations of Aarch32. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401386724-26529-2-git-send-email-peter.maydell@linaro.org [PMM: * rebase * fix bad indent * add a missing UNDEF check for Q!=1 in the 3-reg SHA1/SHA256 case * use g_assert_not_reached() * don't re-extract bit 6 for the 2-reg-misc encodings * set the ELF HWCAP2 bits for the new features ] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-05Merge remote-tracking branch 'remotes/bonzini/softmmu-smap' into stagingPeter Maydell1-0/+1
* remotes/bonzini/softmmu-smap: (33 commits) target-i386: cleanup x86_cpu_get_phys_page_debug target-i386: fix protection bits in the TLB for SMEP target-i386: support long addresses for 4MB pages (PSE-36) target-i386: raise page fault for reserved bits in large pages target-i386: unify reserved bits and NX bit check target-i386: simplify pte/vaddr calculation target-i386: raise page fault for reserved physical address bits target-i386: test reserved PS bit on PML4Es target-i386: set correct error code for reserved bit access target-i386: introduce support for 1 GB pages target-i386: introduce do_check_protect label target-i386: tweak handling of PG_NX_MASK target-i386: commonize checks for PAE and non-PAE target-i386: commonize checks for 4MB and 4KB pages target-i386: commonize checks for 2MB and 4KB pages target-i386: fix coding standards in x86_cpu_handle_mmu_fault target-i386: simplify SMAP handling in MMU_KSMAP_IDX target-i386: fix kernel accesses with SMAP and CPL = 3 target-i386: move check_io helpers to seg_helper.c target-i386: rename KSMAP to KNOSMAP ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-05softmmu: introduce cpu_ldst.hPaolo Bonzini1-0/+1
This will collect all load and store helpers soon. For now it is just a replacement for softmmu_exec.h, which this patch stops including directly, but we also include it where this will be necessary in order to simplify the next patch. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-21target-i386: fix segment flags for SMM and VM86 modePaolo Bonzini1-1/+1
With the next patch, these need to be correct or VM86 tasks have the wrong CPL. The flags are basically what the Intel VMX documentation say is mandatory for entry into a VM86 guest. For consistency, SMM ought to have the same flags except with CPL=0. Tested-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-13target-i386: the x86 CPL is stored in CS.selector - auto update hflags ↵Kevin O'Connor1-2/+0
accordingly. Instead of manually calling cpu_x86_set_cpl() when the CPL changes, check for CPL changes on calls to cpu_x86_load_seg_cache(R_CS). Every location that called cpu_x86_set_cpl() also called cpu_x86_load_seg_cache(R_CS), so cpu_x86_set_cpl() is no longer required. This fixes the SMM handler code as it was not setting/restoring the CPL level manually. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-05linux-user: fix getrusage and wait4 failures with invalid rusage structPetar Jovanovic1-3/+8
Implementations of system calls getrusage and wait4 have not previously handled correctly cases when incorrect address of struct rusage is passed. This change makes sure return values are correctly set for these cases. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02linux-user/elfload.c: Support ARM HWCAP2 flagsPeter Maydell1-1/+29
The ARM kernel has chosen to spill into the HWCAP2 ELF feature bit flags early, even though it hasn't yet exhausted all 32 bits of the HWCAP word. Add support for setting this in the same way we do for HWCAP. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02linux-user/elfload.c: Fix A64 code which was incorrectly acting like A32Peter Maydell1-13/+73
The ARM target-specific code in elfload.c was incorrectly allowing the 64-bit ARM target to use most of the existing 32-bit definitions: most noticably this meant that our HWCAP bits passed to the guest were wrong, and register handling when dumping core was totally broken. Fix this by properly separating the 64 and 32 bit code, since they have more differences than similarities. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-stable@nongnu.org Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02linux-user/elfload.c: Update ARM HWCAP bitsPeter Maydell1-2/+20
The kernel has added support for a number of new ARM HWCAP bits; add them to QEMU, including support for setting them where we have a corresponding CPU feature bit. We were also incorrectly setting the VFPv3D16 HWCAP -- this means "only 16 D registers", not "supports 16-bit floating point format"; since QEMU always has 32 D registers for VFPv3, we can just remove the line that incorrectly set this bit. The kernel does not set the HWCAP_FPA even if it is providing FPA emulation via nwfpe, so don't set this bit in QEMU either. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-stable@nongnu.org Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02linux-user/elfload.c: Fix incorrect ARM HWCAP bitsPeter Maydell1-4/+5
The ELF HWCAP bits for ARM features THUMBEE, NEON, VFPv3 and VFPv3D16 are all off by one compared to the kernel definitions. Fix this discrepancy and add in the missing CRUNCH bit which was the cause of the off-by-one error. (We don't emulate any of the CPUs which have that weird hardware, so it's otherwise uninteresting to us.) Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02linux-user: remove configure option for setting uname releaseRiku Voipio2-3/+1
--enable-uname-release was a rather heavyweight hammer, as it allows providing values less that UNAME_MINIMUM_RELEASE. Also, it affects all built linux-user targets, which in most cases is not what user wants. Now that we have UNAME_MINIMUM_RELEASE for all linux-user platforms, we can drop --enable-uname-release and the related CONFIG_UNAME_RELEASE define. Users can still override the variable with QEMU_UNAME=2.6.32 or -r command line option. If distributors need to update a minimum version for a specific target, it can be done by updating UNAME_MINIMUM_RELEASE. Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02linux-user: move uname functions to uname.cRiku Voipio3-102/+110
Make syscall.c slightly smaller by moving uname-related functions to uname.c. Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02linux-user: rename cpu-uname -> unameRiku Voipio4-3/+3
To move more uname related functions out of syscall.c, rename cpu-uname.{c,h} to uname.{c.h} Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02linux-user/signal.c: Set fault address in AArch64 signal infoPeter Maydell1-2/+1
Set the fault address correctly in the signal information passed to a signal handler for AArch64 guests. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02linux-user: avoid using glibc internals in _syscall5 and in definition of ↵Natanael Copa2-2/+16
target_sigevent struct Use the public sigset_t instead of the glibc specific internal __sigset_t in _syscall. Calculate the sigevent pad size is calculated in similar way as kernel does it instead of using glibc internal field _pad. This is needed for building with musl libc. Signed-off-by: Natanael Copa <ncopa@alpinelinux.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-02linux-user: Handle arches with llseek instead of _llseekJames Hogan1-0/+5
Recently merged kernel ports (such as OpenRISC and Meta) have an llseek system call instead of _llseek. This is handled for the host architecture by defining __NR__llseek as __NR_llseek, but not for the target architecture. Handle it in the same way for these architectures, defining TARGET_NR__llseek as TARGET_NR_llseek. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Jia Liu <proljc@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02linux-user: Add support for SCM_CREDENTIALS.Huw Davies1-0/+11
Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02linux-user: Move if-elses to a switch statement.Huw Davies1-18/+33
This makes adding more message types cleaner. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02linux-user: Assert stack used for auxvec, envp, argvJames Hogan1-0/+2
Assert that the amount of stack space used for auxvec, envp & argv exactly matches the amount allocated. This catches if DLINFO_ITEMS isn't updated when another NEW_AUX_ENT is added. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-05-02linux-user: Add /proc/self/exe open forwardingMaxim Ostapenko1-0/+5
QEMU already supports /proc/self/{maps,stat,auxv} so addition of /proc/self/exe is rather trivial. Fixes https://bugs.launchpad.net/qemu/+bug/1299190 Signed-off-by: Maxim Ostapenko <m.ostapenko@partner.samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-04-17target-arm: Define exception record for AArch64 exceptionsPeter Maydell1-32/+24
For AArch32 exceptions, the only information provided about the cause of an exception is the individual exception type (data abort, undef, etc), which we store in cs->exception_index. For AArch64, the CPU provides much more detail about the cause of the exception, which can be found in the syndrome register. Create a set of fields in CPUARMState which must be filled in whenever an exception is raised, so that exception entry can correctly fill in the syndrome register for the guest. This includes the information which in AArch32 appears in the DFAR and IFAR (fault address registers) and the DFSR and IFSR (fault status registers) for data aborts and prefetch aborts, since if we end up taking the MMU fault to AArch64 rather than AArch32 this will need to end up in different system registers. This patch does a refactoring which moves the setting of the AArch32 DFAR/DFSR/IFAR/IFSR from the point where the exception is raised to the point where it is taken. (This is no change for cores with an MMU, retains the existing clearly incorrect behaviour for ARM946 of trashing the MP access permissions registers which share the c5_data and c5_insn state fields, and has no effect for v7M because we don't implement its MPU fault status or address registers.) As a side effect of the cleanup we fix a bug in the AArch64 linux-user mode code where we were passing a 64 bit fault address through the 32 bit c6_data/c6_insn fields: it now goes via the always-64-bit exception.vaddress. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-04-01linux-user: pass correct host flags to accept4()Petar Jovanovic1-2/+5
Flags NONBLOCK and CLOEXEC can have different values on the host and the guest, so set correct host values before calling accept4(). This fixes several issues with accept4 system call and user-mode of QEMU. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-07 05:27:11 +0000