summaryrefslogtreecommitdiff
path: root/migration.c
AgeCommit message (Collapse)AuthorFilesLines
2013-08-01migration: don't use uninitialized variablesPawit Pornkitprasan1-2/+2
The qmp_migrate method uses the 'blk' and 'inc' parameter without checking if they're valid or not (they may be uninitialized if command is received via QMP) Signed-off-by: Pawit Pornkitprasan <p.pawit@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-08-01migration: send total time in QMP at "completed" stagePawit Pornkitprasan1-0/+1
The "completed" stage sets total_time but not has_total_time and thus it is not sent via QMP reply (but sent via HMP nevertheless) Signed-off-by: Pawit Pornkitprasan <p.pawit@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-07-29migration: fix spice migrationStefan Hajnoczi1-2/+2
Commit 29ae8a4133082e16970c9d4be09f4b6a15034617 ("rdma: introduce MIG_STATE_NONE and change MIG_STATE_SETUP state transition") changed the state transitions during migration setup. Spice used to be notified with MIG_STATE_ACTIVE and it detected this using migration_is_active(). Spice is now notified with MIG_STATE_SETUP and migration_is_active() no longer works. Replace migration_is_active() with migration_in_setup() to fix spice migration. Cc: Michael R. Hines <mrhines@us.ibm.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-29migration: notify migration state before starting threadStefan Hajnoczi1-1/+3
The migration thread runs outside the QEMU global mutex when possible. Therefore we must notify migration state change *before* starting the migration thread. This allows registered listeners to act before live migration iterations begin. Therefore they can get into a state that allows for live migration. When the migration thread starts everything will be ready. Without this patch there is a race condition during migration setup, depending on whether the migration thread has already transitioned from SETUP to ACTIVE state. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-23rdma: account for the time spent in MIG_STATE_SETUP through QMPMichael R. Hines1-0/+9
Using the previous patches, we're now able to timestamp the SETUP state. Once we have this time, let the user know about it in the schema. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-23rdma: introduce MIG_STATE_NONE and change MIG_STATE_SETUP state transitionMichael R. Hines1-7/+14
As described in the previous patch, until now, the MIG_STATE_SETUP state was not really a 'formal' state. It has been used as a 'zero' state (what we're calling 'NONE' here) and QEMU has been unconditionally transitioning into this state when the QMP migration command was called. Instead we want to introduce MIG_STATE_NONE, which is our starting state in the state machine, and then immediately transition into the MIG_STATE_SETUP state when the QMP migrate command is issued. In order to do this, we must delay the transition into MIG_STATE_ACTIVE until later in the migration_thread(). This is done to be able to timestamp the amount of time spent in the SETUP state for proper accounting to the user during an RDMA migration. Furthermore, the management software, until now, has never been aware of the existence of the SETUP state whatsoever. This must change, because, timing of this state implies that the state actually exists. These two patches cannot be separated because the 'query_migrate' QMP switch statement needs to know how to handle this new state transition. Reviewed-by: Juan Quintela <quintela@redhat.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-23rdma: allow state transitions between other states besides ACTIVEMichael R. Hines1-6/+6
This patch is in preparation for the next ones: Until now the MIG_STATE_SETUP state was not really a 'formal' state. It has been used as a 'zero' state and QEMU has been unconditionally transitioning into this state when the QMP migrate command was called. In preparation for timing this state, we have to make this state a a 'real' state which actually gets transitioned from later in the migration_thread() from SETUP => ACTIVE, rather than just automatically dropping into this state at the beginninig of the migration. This means that the state transition function (migration_finish_set_state()) needs to be capable of transitioning from valid states _other_ than just MIG_STATE_ACTIVE. The function is in fact already capable of doing that, but was not allowing the old state to be a parameter specified as an input. This patch fixes that and only makes the transition if the current state matches the old state that the caller intended to transition from. Reviewed-by: Juan Quintela <quintela@redhat.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-23rdma: core logicMichael R. Hines1-0/+8
Code that does need to be visible is kept well contained inside this file and this is the only new additional file to the entire patch. This file includes the entire protocol and interfaces required to perform RDMA migration. Also, the configure and Makefile modifications to link this file are included. Full documentation is in docs/rdma.txt Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-19block-migration: efficiently encode zero blocksPeter Lieven1-0/+9
this patch adds a efficient encoding for zero blocks by adding a new flag indicating a block is completely zero. additionally bdrv_write_zeros() is used at the destination to efficiently write these zeroes. depending on the implementation this avoids that the destination target gets fully provisioned. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-15Merge remote-tracking branch 'quintela/migration.next' into stagingAnthony Liguori1-0/+9
# By Chegu Vinod # Via Juan Quintela * quintela/migration.next: Force auto-convegence of live migration Add 'auto-converge' migration capability Introduce async_run_on_cpu() Message-id: 1373664508-5404-1-git-send-email-quintela@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-15migration: Fail migration on bdrv_flush_all() errorKevin Wolf1-3/+14
If bdrv_flush_all() returns an error, there is an inconsistency in the view of an image file between the source and the destination host. Completing the migration would lead to corruption. Better abort migration in this case. To reproduce this case, try the following (ensures that there is something to flush, and then fails that flush): $ qemu-img create -f qcow2 test.qcow2 1G $ cat blkdebug.cfg [inject-error] event = "flush_to_os" errno = "5" $ qemu-system-x86_64 -hda blkdebug:blkdebug.cfg:test.qcow2 -monitor stdio (qemu) qemu-io ide0-hd0 "write 0 4k" (qemu) migrate ... Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-12Add 'auto-converge' migration capabilityChegu Vinod1-0/+9
The auto-converge migration capability allows the user to specify if they choose live migration seqeunce to automatically detect and force convergence. Signed-off-by: Chegu Vinod <chegu_vinod@hp.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-07-04add a header file for atomic operationsPaolo Bonzini1-2/+1
We're already using them in several places, but __sync builtins are just too ugly to type, and do not provide seqcst load/store operations. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-27rdma: introduce capability x-rdma-pin-allMichael R. Hines1-0/+9
This capability allows you to disable dynamic chunk registration for better throughput on high-performance links. For example, using an 8GB RAM virtual machine with all 8GB of memory in active use and the VM itself is completely idle using a 40 gbps infiniband link: 1. x-rdma-pin-all disabled total time: approximately 7.5 seconds @ 9.5 Gbps 2. x-rdma-pin-all enabled total time: approximately 4 seconds @ 26 Gbps These numbers would of course scale up to whatever size virtual machine you have to migrate using RDMA. Enabling this feature does *not* have any measurable affect on migration *downtime*. This is because, without this feature, all of the memory will have already been registered already in advance during the bulk round and does not need to be re-registered during the successive iteration rounds. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-06-27rdma: export throughput w/ MigrationStats QMPMichael R. Hines1-0/+6
This exposes throughput (in megabits/sec) through QMP. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-06-01migration: Remove duplicate bandwidth_limit setLei Li1-1/+0
bandwidth_limit is double set in migrate_init(), remove one. Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-17Revert "migration: don't account sleep time for calculating bandwidth"Michael Roth1-4/+1
This reverts commit 7161082c8d8cf167c508976887a0a63f4db92b51. Reverting this patch fixes a divide-by-zero error in qemu that can be fairly reliably triggered by doing block migration. In this case, the configuration/error was: source: temp/x86_64-softmmu/qemu-system-x86_64 -enable-kvm -L temp-bios -M pc-i440fx-1.4 -m 512M -kernel boot/vmlinuz-x86_64 -initrd boot/test-initramfs-x86_64.img.gz -vga std -append seed=1234 -drive file=disk1.img,if=virtio -drive file=disk2.img,if=virtio -device virtio-net-pci,netdev=net0 -netdev user,id=net0 -monitor unix:/tmp/vm-hmp.sock,server,nowait -qmp unix:/tmp/vm-qmp.sock,server,nowait -vnc :100 16837 Floating point exception(core dumped) target: temp/x86_64-softmmu/qemu-system-x86_64 -enable-kvm -L temp-bios -M pc-i440fx-1.4 -m 512M -kernel boot/vmlinuz-x86_64 -initrd boot/test-initramfs-x86_64.img.gz -vga std -append seed=1234 -drive file=target_disk1.img,if=virtio -drive file=target_disk2.img,if=virtio -device virtio-net-pci,netdev=net0 -netdev user,id=net0 -incoming unix:/tmp/migrate.sock -monitor unix:/tmp/vm-hmp-incoming.sock,server,nowait -qmp unix:/tmp/vm-qmp-incoming.sock,server,nowait -vnc :101 Receiving block device images 20 % 21 % load of migration failed This revert potentially re-introduces a bug that was present in 1.4, but fixes a prevalent issue with block migration so we should revert it for now and take an updated patch later. Conflicts: migration.c * fixed up to remove logic introduced in 7161082c while leaving changes in HEAD intact Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-id: 1368739544-31021-1-git-send-email-mdroth@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17migration: reflect incoming failure to shellEric Blake1-1/+1
Management apps like libvirt don't know to pay attention to stderr unless there is a non-zero exit status. * migration.c (process_incoming_migration_co): Exit with non-zero status on failure. Signed-off-by: Eric Blake <eblake@redhat.com> Message-id: 1366149041-626-1-git-send-email-eblake@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-02oslib-posix: rename socket_set_nonblock() to qemu_set_nonblock()Stefan Hajnoczi1-1/+1
The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets. Rename to qemu_set_nonblock() just like qemu_set_cloexec(). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-26migration: do not sent zero pages in bulk stagePeter Lieven1-1/+2
during bulk stage of ram migration if a page is a zero page do not send it at all. the memory at the destination reads as zero anyway. even if there is an madvise with QEMU_MADV_DONTNEED at the target upon receipt of a zero page I have observed that the target starts swapping if the memory is overcommitted. it seems that the pages are dropped asynchronously. this patch also updates QMP to return the number of skipped pages in MigrationStats. Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: inline migrate_fd_closePaolo Bonzini1-12/+2
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: eliminate s->migration_filePaolo Bonzini1-47/+4
The indirection is useless now. Backends can open s->file directly. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: move contents of migration_close to migrate_fd_cleanupPaolo Bonzini1-10/+7
With this patch, the migration_file is not needed anymore. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: move rate limiting to QEMUFilePaolo Bonzini1-50/+1
Rate limiting is now simply a byte counter; client call qemu_file_rate_limit() manually to determine if they have to exit. So it is possible and simple to move the functionality to QEMUFile. This makes the remaining functionality of s->file redundant; in the next patch we can remove it and write directly to s->migration_file. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: small changes around rate-limitingPaolo Bonzini1-8/+11
This patch extracts a few small changes from the next patch, which are unrelated to adding generic rate-limiting functionality to QEMUFile. Make migration_set_rate_limit a simple accessor, and use qemu_file_set_rate_limit consistently. Also fix a typo where INT_MAX should have been SIZE_MAX. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: use qemu_ftell to compute bandwidthPaolo Bonzini1-1/+3
Prepare for when s->bytes_xfer will be removed. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: use QEMUFile for writing outgoing migration dataPaolo Bonzini1-38/+8
Second, drop the file descriptor indirection, and write directly to the QEMUFile. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: use QEMUFile for migration channel lifetimePaolo Bonzini1-3/+5
As a start, use QEMUFile to store the destination and close it. qemu_get_fd gets a file descriptor that will be used by the write callbacks. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: use qemu_file_rate_limit consistentlyPaolo Bonzini1-2/+2
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: remove useless qemu_file_get_error checkPaolo Bonzini1-6/+0
migration_put_buffer is never called if there has been an error. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: detect error before sleepingPaolo Bonzini1-3/+4
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: eliminate last_roundPaolo Bonzini1-6/+5
We will go around the loop exactly once after setting last_round. Eliminate the variable altogether. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11Rename buffered_ to migration_Juan Quintela1-16/+16
This is consistent once that we have moved everything to migration.c Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: yay, buffering is gonePaolo Bonzini1-58/+21
Buffering was needed because blocking writes could take a long time and starve other threads seeking to grab the big QEMU mutex. Now that all writes (except within _complete callbacks) are done outside the big QEMU mutex, we do not need buffering at all. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: run setup callbacks out of big lockPaolo Bonzini1-2/+0
Only the migration_bitmap_sync() call needs the iothread lock. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: run pending/iterate callbacks out of big lockPaolo Bonzini1-2/+2
This makes it possible to do blocking writes directly to the socket, with no buffer in the middle. For RAM, only the migration_bitmap_sync() call needs the iothread lock. For block migration, it is needed by the block layer (including bdrv_drain_all and dirty bitmap access), but because some code is shared between iterate and complete, all of mig_save_device_dirty is run with the lock taken. In the savevm case, the iterate callback runs within the big lock. This is annoying because it complicates the rules. Luckily we do not need to do anything about it: the RAM iterate callback does not need the iothread lock, and block migration never runs during savevm. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: cleanup migration (including thread) in the iothreadPaolo Bonzini1-18/+20
Perform final cleanup in a bottom half, and add joining the thread to the series of cleanup actions. migrate_fd_error remains for connection error, but it doesn't need to cleanup anything anymore. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: prepare to access s->state outside critical sectionsPaolo Bonzini1-12/+21
Accessing s->state outside the big QEMU lock will simplify a bit the locking/unlocking of the iothread lock. We need to keep the lock in migrate_fd_error and migrate_fd_completed, however, because they call migrate_fd_cleanup. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: add migrate_set_state tracepointKazuya Saito1-1/+8
Signed-off-by: Kazuya Saito <saito.kazuya@jp.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: do not nest flushing of device dataPaolo Bonzini1-31/+24
Completion of migration is currently done with a "nested" loop that invokes buffered_flush: migrate_fd_completed is called by buffered_file_thread, which calls migrate_fd_cleanup, which calls buffered_close (via qemu_fclose), which flushes the buffer. Simplify this, by reusing the buffered_flush call of buffered_file_thread. Then if qemu_savevm_state_complete was called, and the buffer is empty (including the QEMUFile buffer, for which we need the previous patch), we are done. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: simplify error handlingPaolo Bonzini1-32/+14
Always use qemu_file_get_error to detect errors, since that is how QEMUFile itself drops I/O after an error occurs. There is no need to propagate and check return values all the time. Also remove the "complete" member, since we know that it is set (via migrate_fd_cleanup) only when the state changes. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: use qemu_file_set_errorPaolo Bonzini1-16/+6
Remove the return value of buffered_flush, pass it via the error code of s->file. Once this is done, the error can be retrieved simply via migrate_fd_close's call to qemu_fclose. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: flush all data to fd when buffered_flush is calledPaolo Bonzini1-0/+2
Including data that resided in the QEMUFile's own buffer. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: move more error handling to migrate_fd_cleanupPaolo Bonzini1-6/+10
The next patch will add more cases where qemu_savevm_state_cancel needs to be called; prepare for that already, the function can be called twice with no ill effect. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: always use vm_stop_force_statePaolo Bonzini1-5/+1
vm_stop_force_state does: if (runstate_is_running()) { vm_stop(state); } else { runstate_set(state); } migration.c does: if (runstate_is_running()) { vm_stop(state); } else { vm_stop_force_state(state); } The code run is the same even if we always use vm_stop_force_state in migration.c. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: simplify while loopPaolo Bonzini1-10/+1
Unify the goto around the loop, with the exit condition at the end of it. Both can be expressed as "while (ret >= 0)". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-02-22migration: calculate expected_downtimeJuan Quintela1-0/+5
We removed the calculation in commit e4ed1541ac9413eac494a03532e34beaf8a7d1c5 Now we add it back. We need to create dirty_bytes_rate because we can't include cpu-all.h from migration.c, and there is no other way to include TARGET_PAGE_SIZE. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2013-02-22migration: don't account sleep time for calculating bandwidthJuan Quintela1-1/+4
While we are sleeping we are not sending, so we should not use that time to estimate our bandwidth. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2013-02-22migration: calculate end time after we have sent the dataJuan Quintela1-1/+2
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>
2013-02-22migration: change initial value of expected_downtimeJuan Quintela1-0/+2
0 is a very bad initial value, what we are trying to get is max_downtime, so that is a much better estimation. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com>