summaryrefslogtreecommitdiff
path: root/migration
AgeCommit message (Collapse)AuthorFilesLines
2016-01-29migration: Clean up includesPeter Maydell16-12/+16
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-2-git-send-email-peter.maydell@linaro.org
2016-01-22fpu: Replace uint8 typedef with uint8_tPeter Maydell1-1/+1
Replace the uint8 softfloat-specific typedef with uint8_t. This change was made with find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint8\b/uint8_t/g' together with manual removal of the typedef definition and manual fixing of more erroneous uses found via test compilation. It turns out that the only code using this type is an accidental use where uint8_t was intended anyway... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: Leon Alrae <leon.alrae@imgtec.com> Acked-by: James Hogan <james.hogan@imgtec.com> Message-id: 1452603315-27030-7-git-send-email-peter.maydell@linaro.org
2016-01-20block: Inactivate BDS when migration completesKevin Wolf1-0/+7
So far, live migration with shared storage meant that the image is in a not-really-ready don't-touch-me state on the destination while the source is still actively using it, but after completing the migration, the image was fully opened on both sides. This is bad. This patch adds a block driver callback to inactivate images on the source before completing the migration. Inactivation means that it goes to a state as if it was just live migrated to the qemu instance on the source (i.e. BDRV_O_INACTIVE is set). You're then supposed to continue either on the source or on the destination, which takes ownership of the image. A typical migration looks like this now with respect to disk images: 1. Destination qemu is started, the image is opened with BDRV_O_INACTIVE. The image is fully opened on the source. 2. Migration is about to complete. The source flushes the image and inactivates it. Now both sides have the image opened with BDRV_O_INACTIVE and are expecting the other side to still modify it. 3. One side (the destination on success) continues and calls bdrv_invalidate_all() in order to take ownership of the image again. This removes BDRV_O_INACTIVE on the resuming side; the flag remains set on the other side. This ensures that the same image isn't written to by both instances (unless both are resumed, but then you get what you deserve). This is important because .bdrv_close for non-BDRV_O_INACTIVE images could write to the image file, which is definitely forbidden while another host is using the image. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2016-01-16vmstate: Introduce VMSTATE_VARRAY_MULTPLYJuan Quintela1-0/+4
This allows to send a partial array where the size is another structure field multiplied by a constant. Signed-off-by: Juan Quintela <quintela@redhat.com> [PMM: updated to current master] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-01-16vmstate: introduce CPU_DoubleU arraysJuan Quintela1-0/+23
Add vmstate support for migrating arrays of CPU_DoubleU via VMSTATE_CPUDOUBLE_ARRAY. Signed-off-by: Juan Quintela <quintela@redhat.com> [PMM: rebased, since files have all moved since 2012; added VMSTATE_CPUDOUBLE_ARRAY_V for consistency with FLOAT64] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-01-14Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2016-01-13' ↵Peter Maydell2-13/+10
into staging Error reporting patches for 2016-01-13 # gpg: Signature made Wed 13 Jan 2016 14:21:48 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-error-2016-01-13: (41 commits) checkpatch: Detect newlines in error_report and other error functions error: Consistently name Error * objects err, and not errp s390/sclp: Simplify control flow in sclp_realize() hw/s390x: Rename local variables Error *l_err to just err error: Clean up errors with embedded newlines (again) vhdx: Fix "log that needs to be replayed" error message pci-assign: Clean up "Failed to assign" error messages vmdk: Clean up "Invalid extent lines" error message vmdk: Clean up control flow in vmdk_parse_extents() a bit error: Strip trailing '\n' from error string arguments (again) qemu-io qemu-nbd: Use error_report() etc. instead of fprintf() migration: Use error_reportf_err() instead of monitor_printf() spapr: Use error_reportf_err() error: Use error_prepend() where it makes obvious sense error: Use error_reportf_err() where it makes obvious sense error: Don't decorate original error message when adding to it error: New error_prepend(), error_reportf_err() test-throttle: Simplify qemu_init_main_loop() error handling qemu-nbd: Clean up "Failed to load snapshot" error message block: Clean up "Could not create temporary overlay" error message ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-13error: Strip trailing '\n' from error string arguments (again)Markus Armbruster2-3/+3
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they keep coming back. Tracked down with the Coccinelle semantic patch from commit 312fd5f. Cc: Fam Zheng <famz@redhat.com> Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com> Cc: Bharata B Rao <bharata@linux.vnet.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com> Cc: Stefan Berger <stefanb@linux.vnet.ibm.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Changchun Ouyang <changchun.ouyang@intel.com> Cc: zhanghailiang <zhang.zhanghailiang@huawei.com> Cc: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Markus Armbruster <armbru@pond.sub.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Acked-by: Fam Zheng <famz@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
2016-01-13migration: Use error_reportf_err() instead of monitor_printf()Markus Armbruster1-8/+6
Both error_reportf_err() and monitor_printf() print to the same destination when monitor_printf() is used correctly, i.e. within an HMP monitor. Elsewhere, monitor_printf() does nothing, while error_reportf_err() reports to stderr. Both changed functions are HMP command handlers. These should only run within an HMP monitor. Unlike monitor_printf(), error_reportf_err() uses the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I don't think the errors touched in this commit can come with hints. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-15-git-send-email-armbru@redhat.com>
2016-01-13error: Use error_report_err() instead of monitor_printf()Markus Armbruster1-2/+1
Both error_report_err() and monitor_printf() print to the same destination when monitor_printf() is used correctly, i.e. within an HMP monitor. Elsewhere, monitor_printf() does nothing, while error_report_err() reports to stderr. Most changed functions are HMP command handlers. These should only run within an HMP monitor. The one exception is bdrv_password_cb(), which should also only run within an HMP monitor. Four command handlers prefix the error message with the command name: balloon, migrate_set_capability, migrate_set_parameter, migrate. Pointless, drop. Unlike monitor_printf(), error_report_err() uses the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00). Example: (qemu) device_add ivshmem,id=666 Parameter 'id' expects an identifier Identifiers consist of letters, digits, '-', '.', '_', starting with a letter. Try "help device_add" for more information The "Identifiers consist of..." line is new with this patch. Coccinelle semantic patch: @@ expression M, E; @@ - monitor_printf(M, "%s\n", error_get_pretty(E)); - error_free(E); + error_report_err(E); @r1@ expression M, E; format F; position p; @@ - monitor_printf(M, "...%@F@\n", error_get_pretty(E));@p - error_free(E); + error_report_err(E); @script:python@ p << r1.p; @@ print "%s:%s:%s: prefix dropped" % (p[0].file, p[0].line, p[0].column) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-4-git-send-email-armbru@redhat.com>
2016-01-13multithread decompression: Avoid one copyDr. David Alan Gilbert1-8/+3
qemu_get_buffer does a copy, we can avoid the memcpy, and we can then remove the extra buffer. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Liang Li <liang.z.li@intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Message-Id: <1450266458-3178-7-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-01-13Use qemu_get_buffer_in_place for xbzrle dataDr. David Alan Gilbert1-2/+4
Avoid a data copy (if we're lucky) in the xbzrle code. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Message-Id: <1450266458-3178-6-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-01-13Migration: Emit event at start of passDr. David Alan Gilbert1-0/+4
Emit an event each time we sync the dirty bitmap on the source; this helps libvirt use postcopy by giving it a kick when it might be a good idea to start the postcopy. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Message-Id: <1450266458-3178-5-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-01-13Postcopy: Send events/change state on incoming sideDr. David Alan Gilbert1-7/+15
I missed the calls to send migration events on the destination side as we enter postcopy. Take care when adding them not to do it after state has been freed. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Message-Id: <1450266458-3178-4-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-01-13migration: Add state records for migration incomingzhanghailiang1-6/+10
For migration destination, we also need to know its state, we will use it in COLO. Here we add a new member 'state' for MigrationIncomingState, and also use migrate_set_state() to modify its value. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> dgilbert: Fixed early free of MigraitonIncomingState Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Message-Id: <1450266458-3178-3-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-01-13migration: Export migrate_set_state()zhanghailiang1-15/+21
Change the first parameter of migrate_set_state(), and export it. We will use it in a later patch to update incoming state. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Updated comment as per Juan's review Message-Id: <1450266458-3178-2-git-send-email-dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2015-12-17qapi: Don't let implicit enum MAX member collideEric Blake1-2/+2
Now that we guarantee the user doesn't have any enum values beginning with a single underscore, we can use that for our own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious that the sentinel is generated. This patch was mostly generated by applying a temporary patch: |diff --git a/scripts/qapi.py b/scripts/qapi.py |index e6d014b..b862ec9 100644 |--- a/scripts/qapi.py |+++ b/scripts/qapi.py |@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = { | max_index = c_enum_const(name, 'MAX', prefix) | ret += mcgen(''' | [%(max_index)s] = NULL, |+// %(max_index)s | }; | ''', | max_index=max_index) then running: $ cat qapi-{types,event}.c tests/test-qapi-types.c | sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list $ git grep -l _MAX | xargs sed -i -f list The only things not generated are the changes in scripts/qapi.py. Rejecting enum members named 'MAX' is now useless, and will be dropped in the next patch. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> [Rebased to current master, commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-11Fix xbzrle vs last_sent_block updateDr. David Alan Gilbert1-1/+10
My fix (84e7b80a) replaced the last_sent_block update that I'd removed earlier; however it was too aggressive in the xbzrle case. save_xbzrle_page might return '0' to mean that the page didn't need sending since it was the same as the last sent version; in this case we can't update 'last_sent_block' since we didn't actually send it. Symptom: 'Illegal RAM offset 1018000' as we try and send a page to the wrong RAMBlock; potentially that could be a data corruption if you were really unlucky. Fixes: 84e7b80a05c0c44b90533c6cd2f1db5c932ccf77 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-id: 1449765106-6528-1-git-send-email-dgilbert@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-03migration: do floating-point divisionPaolo Bonzini1-1/+1
Dividing integer expressions transferred_bytes and time_spent, and then converting the integer quotient to type double. Any remainder, or fractional part of the quotient, is ignored. Fix this. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-12-03migration: Clean up use of g_poll() in socket_writev_buffer()Markus Armbruster1-1/+2
socket_writev_buffer() writes in a loop, using g_poll() to block. If g_poll() fails, it tries to write more before the file descriptor is ready. In theory, this could go into a tight loop. In practice, errors other than EINTR are really unlikely, and when they happen, we're probably screwed anyway, so we can just as well loop. Clean it up a bit: retry poll on EINTR, keep ignoring other errors. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-25block-migration: limit the memory usageWen Congyang1-1/+6
If we set migration speed in a very large value, block-migration will try to read all data to the memory. Because (block_mig_state.submitted + block_mig_state.read_done) * BLOCK_SIZE will be overflow, and it will be always less than rate limit. There is no need to read too many data into memory when the rate limit is very large. So limit the memory usage can fix the overflow problem. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-25Assume madvise for (no)hugepage worksDr. David Alan Gilbert1-8/+2
madvise() returns EINVAL in the case of many failures, but also returns it in cases where the host kernel doesn't have THP enabled. Postcopy only really cares that THP is off before it detects faults, and turns it back on afterwards; so we're going to have to assume that if the madvise fails then the host just doesn't do THP and we can carry on with the postcopy. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Tested-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19migration: normalize locking in migration/savevm.cDenis V. Lunev1-1/+18
basically all bdrv_* operations must be called under aio_context_acquire except ones with bdrv_all prefix. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19migration: implement bdrv_all_find_vmstate_bs helperDenis V. Lunev1-15/+4
The patch also ensures proper locking for the operation. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19migration: reorder processing in hmp_savevmDenis V. Lunev1-9/+9
State deletion can be performed on running VM which reduces VM downtime This approach looks a bit more natural. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19snapshot: create bdrv_all_create_snapshot helperDenis V. Lunev1-13/+4
to create snapshot for all loaded block drivers. The patch also ensures proper locking. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19migration: drop find_vmstate_bs check in hmp_delvmDenis V. Lunev1-5/+0
There is no much sense to do the check and write warning. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19snapshot: create bdrv_all_find_snapshot helperDenis V. Lunev1-33/+9
to check that snapshot is available for all loaded block drivers. The check bs != bs1 in hmp_info_snapshots is an optimization. The check for availability of this snapshot will return always true as the list of snapshots was collected from that image. The patch also ensures proper locking. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19migration: factor our snapshottability check in load_vmstateDenis V. Lunev1-8/+7
We should check that all inserted and not read-only images support snapshotting. This could be made using already invented helper bdrv_all_can_snapshot(). Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19snapshot: create bdrv_all_goto_snapshot helperDenis V. Lunev1-10/+5
to switch to snapshot on all loaded block drivers. The patch also ensures proper locking. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19snapshot: create bdrv_all_delete_snapshot helperDenis V. Lunev1-44/+10
to delete snapshots from all loaded block drivers. The patch also ensures proper locking. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19snapshot: create helper to test that block drivers supports snapshotsDenis V. Lunev1-13/+4
The patch enforces proper locking for this operation. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19Unneeded NULL checkDr. David Alan Gilbert1-1/+1
The check is unneccesary, we read the value at the start of the thread, use it, and never change it. The value is checked to be non-NULL before thread creation. Spotted by coverity, CID 1339211 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19migration: Dead assignment of current_timeDr. David Alan Gilbert1-1/+0
I set current_time before the postcopy test but never use it; (I think this was from the original version where it was time based). Spotted by coverity, CID 1339208 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-19Set last_sent_blockDr. David Alan Gilbert1-0/+1
In a82d593b61054b3dea43 I accidentally removed the setting of last_sent_block, put it back. Symptoms: Multithreaded compression only uses one thread. Migration is a bit less efficient since it won't use 'cont' flags. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixes: a82d593b61054b3dea43 Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-12migration_init: Fix lock initialisation/make it explicitDr. David Alan Gilbert1-30/+23
Peter reported a lock error on MacOS after my a82d593b patch. migrate_get_current does one-time initialisation of a bunch of variables. migrate_init does reinitialisation even on a 2nd migrate after a cancel. The problem here was that I'd initialised the mutex in migrate_get_current, and the memset in migrate_init corrupted it. Remove the memset and replace it by explicit initialisation of fields that need initialising; this also turns out to be simpler than the old code that had to preserve some fields. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixes: a82d593b Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-12migrate-start-postcopy: Improve textDr. David Alan Gilbert1-1/+1
Improve the text in both the qapi-schema and hmp help to point out you need to set the postcopy-ram capability prior to issuing migrate-start-postcopy. Also fix the text of the migrate_start_postcopy error that deals with capabilities. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Acked-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-12Postcopy: Fix TP!=HP zero caseDr. David Alan Gilbert1-1/+1
Where the target page size is different from the host page we special case it, but I messed up on the zero case check. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-12Finish non-postcopiable iterative devices before packageDr. David Alan Gilbert2-4/+16
Where we have iterable, but non-postcopiable devices (e.g. htab or block migration), complete them before forming the 'package' but with the CPUs stopped. This stops them filling up the package. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-12migration: Make 32bit linux compile with RDMAJuan Quintela1-1/+1
Rest of the file already use that trick. 64bit offsets make no sense in 32bit archs, but that is ram_addr_t for you. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-11-12migration: print ram_addr_t as RAM_ADDR_FMT not %zxJuan Quintela1-2/+3
Not all the wold is 64bits (yet). Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-11-10migration: qemu_savevm_state_cleanup becomes mandatory operationDenis V. Lunev1-1/+1
since commit commit 94f5a43704129ca4995aa3385303c5ae225bde42 Author: Liang Li <liang.z.li@intel.com> Date: Mon Nov 2 15:37:00 2015 +0800 migration: defer migration_end & blk_mig_cleanup when actual .cleanup callbacks calling was removed from complete operations. The patch fixes regression introduced by the commit above results in 100% reliable assert for virtio-scsi VM with iothreads enabled during 'virsh create-snapshot' operation: assert(i != mr->ioeventfd_nb); memory_region_del_eventfd virtio_pci_set_host_notifier_internal virtio_pci_set_host_notifier virtio_scsi_dataplane_start virtio_scsi_handle_cmd virtio_queue_notify_vq virtio_queue_host_notifier_read aio_dispatch Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Liang Li <liang.z.li@intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Inhibit ballooning during postcopyDr. David Alan Gilbert1-0/+9
Postcopy detects accesses to pages that haven't been transferred yet using userfaultfd, and it causes exceptions on pages that are 'not present'. Ballooning also causes pages to be marked as 'not present' when the guest inflates the balloon. Potentially a balloon could be inflated to discard pages that are currently inflight during postcopy and that may be arriving at about the same time. To avoid this confusion, disable ballooning during postcopy. When disabled we drop balloon requests from the guest. Since ballooning is generally initiated by the host, the management system should avoid initiating any balloon instructions to the guest during migration, although it's not possible to know how long it would take a guest to process a request made prior to the start of migration. Guest initiated ballooning will not know if it's really freed a page of host memory or not. Queueing the requests until after migration would be nice, but is non-trivial, since the set of inflate/deflate requests have to be compared with the state of the page to know what the final outcome is allowed to be. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Disable mlock around incoming postcopyDr. David Alan Gilbert1-0/+24
Userfault doesn't work with mlock; mlock is designed to nail down pages so they don't move, userfault is designed to tell you when they're not there. munlock the pages we userfault protect before postcopy. mlock everything again at the end if mlock is enabled. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10End of migration for postcopyDr. David Alan Gilbert1-1/+25
Tweak the end of migration cleanup; we don't want to close stuff down at the end of the main stream, since the postcopy is still sending pages on the other thread. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Postcopy: Mark nohugepage before discardDr. David Alan Gilbert2-4/+52
Prior to servicing userfault requests we must ensure we've not got huge pages in the area that might include non-transferred memory, since a hugepage could incorrectly mark the whole huge page as present. We mark the area as non-huge page (nhp) just before we perform discards; the discard code now tells us to discard any areas that haven't been sent (as well as any that are redirtied); any already formed transparent-huge-pages get fragmented by this discard process if they cotnain any discards. Transparent huge pages that have been entirely transferred and don't contain any discards are not broken by this mechanism; they stay as huge pages. By starting postcopy after a full precopy pass, many of the pages then stay as huge pages; this is important for maintaining performance after the end of the migration. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10postcopy: Wire up loadvm_postcopy_handle_ commandsDr. David Alan Gilbert1-1/+27
Wire up more of the handlers for the commands on the destination side, in particular loadvm_postcopy_handle_run now has enough to start the guest running. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Start up a postcopy/listener thread ready for incoming page dataDr. David Alan Gilbert2-1/+84
The loading of a device state (during postcopy) may access guest memory that's still on the source machine and thus might need a page fill; split off a separate thread that handles the incoming page data so that the original incoming migration code can finish off the device data. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Postcopy; Handle userfault requestsDr. David Alan Gilbert1-9/+146
userfaultfd is a Linux syscall that gives an fd that receives a stream of notifications of accesses to pages registered with it and allows the program to acknowledge those stalls and tell the accessing thread to carry on. We convert the requests from the kernel into messages back to the source asking for the pages. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Host page!=target page: Cleanup bitmapsDr. David Alan Gilbert1-0/+172
Prior to the start of postcopy, ensure that everything that will be transferred later is a whole host-page in size. This is accomplished by discarding partially transferred host pages and marking any that are partially dirty as fully dirty. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10Don't iterate on precopy-only devices during postcopyDr. David Alan Gilbert2-3/+12
During the postcopy phase we must not call the iterate method on precopy-only devices, since they may have done some cleanup during the _complete call at the end of the precopy phase. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-28 00:29:10 +0000