summaryrefslogtreecommitdiff
path: root/monitor.c
AgeCommit message (Collapse)AuthorFilesLines
2017-03-05qmp: Clean up how we enforce capability negotiationMarkus Armbruster1-34/+42
To enforce capability negotiation before normal operation, handle_qmp_command() inspects every command before it's handed off to qmp_dispatch(). This is a bit of a layering violation, and results in duplicated code. Before capability negotiation (!cur_mon->in_command_mode), we fail commands other than "qmp_capabilities". This is what enforces capability negotiation. Afterwards, we fail command "qmp_capabilities". Clean this up as follows. The obvious place to fail a command is the command itself, so move the "afterwards" check to qmp_qmp_capabilities(). We do the "before" check in every other command, but that would be bothersome. Instead, start with an alternate list of commands that contains only "qmp_capabilities". Switch to the full list in qmp_qmp_capabilities(). Additionally, replace the generic human-readable error message for CommandNotFound by one that reminds the user to run qmp_capabilities. Without that, we'd regress commit 2d5a834. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1488544368-30622-8-git-send-email-armbru@redhat.com> [Mirco-optimization squashed in, commit message typo fixed] Reviewed-by: Eric Blake <eblake@redhat.com>
2017-03-05qapi: Support multiple command registries per programMarkus Armbruster1-14/+17
The command registry encapsulates a single command list. Give the functions using it a parameter instead. Define suitable command lists in monitor, guest agent and test-qmp-commands. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1488544368-30622-6-git-send-email-armbru@redhat.com> [Debugging turds buried] Reviewed-by: Eric Blake <eblake@redhat.com>
2017-03-05qmp: Dumb down how we run QMP command registrationMarkus Armbruster1-5/+4
The way we get QMP commands registered is high tech: * qapi-commands.py generates qmp_init_marshal() that does the actual work * it also generates the magic to register it as a MODULE_INIT_QAPI function, so it runs when someone calls module_call_init(MODULE_INIT_QAPI) * main() calls module_call_init() QEMU needs to register a few non-qapified commands. Same high tech works: monitor.c has its own qmp_init_marshal() along with the magic to make it run in module_call_init(MODULE_INIT_QAPI). QEMU also needs to unregister commands that are not wanted in this build's configuration (commit 5032a16). Simple enough: qmp_unregister_commands_hack(). The difficulty is to make it run after the generated qmp_init_marshal(). We can't simply run it in monitor.c's qmp_init_marshal(), because the order in which the registered functions run is indeterminate. So qmp_init_marshal() registers qmp_unregister_commands_hack() separately. Since registering *appends* to the list of registered functions, this will make it run after all the functions that have been registered already. I suspect it takes a long and expensive computer science education to not find this silly. Dumb it down as follows: * Drop MODULE_INIT_QAPI entirely * Give the generated qmp_init_marshal() external linkage. * Call it instead of module_call_init(MODULE_INIT_QAPI) * Except in QEMU proper, call new monitor_init_qmp_commands() that in turn calls the generated qmp_init_marshal(), registers the additional commands and unregisters the unwanted ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-5-git-send-email-armbru@redhat.com>
2017-02-27i386: Implement query-cpu-model-expansion QMP commandEduardo Habkost1-1/+3
Implement query-cpu-model-expansion for target-i386. This should meet all the requirements while being simple. In the case of static expansion, it will use the new "base" CPU model, and in the case of full expansion, it will keep the original CPU model name+props, and append extra properties. A future follow-up should improve the implementation of type=full, so that it returns more detailed data, including every writable QOM property in the CPU object. Cc: libvir-list@redhat.com Cc: Jiri Denemark <jdenemar@redhat.com> Message-Id: <20170222190029.17243-3-ehabkost@redhat.com> Tested-by: Jiri Denemark <jdenemar@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-02-24Merge remote-tracking branch 'remotes/armbru/tags/pull-util-2017-02-23' into ↵Peter Maydell1-3/+4
staging option cutils: Fix and clean up number conversions # gpg: Signature made Thu 23 Feb 2017 19:41:17 GMT # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-util-2017-02-23: (24 commits) option: Fix checking of sizes for overflow and trailing crap util/cutils: Change qemu_strtosz*() from int64_t to uint64_t util/cutils: Return qemu_strtosz*() error and value separately util/cutils: Let qemu_strtosz*() optionally reject trailing crap qemu-img: Wrap cvtnum() around qemu_strtosz() test-cutils: Drop suffix from test_qemu_strtosz_simple() test-cutils: Use qemu_strtosz() more often util/cutils: Drop QEMU_STRTOSZ_DEFSUFFIX_* macros util/cutils: New qemu_strtosz() util/cutils: Rename qemu_strtosz() to qemu_strtosz_MiB() util/cutils: New qemu_strtosz_metric() test-cutils: Cover qemu_strtosz() around range limits test-cutils: Cover qemu_strtosz() with trailing crap test-cutils: Cover qemu_strtosz() invalid input test-cutils: Add missing qemu_strtosz()... endptr checks option: Fix to reject invalid and overflowing numbers util/cutils: Clean up control flow around qemu_strtol() a bit util/cutils: Clean up variable names around qemu_strtol() util/cutils: Rename qemu_strtoll(), qemu_strtoull() util/cutils: Rewrite documentation of qemu_strtol() & friends ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-02-22' into ↵Peter Maydell1-6/+7
staging QAPI patches for 2017-02-22 # gpg: Signature made Wed 22 Feb 2017 19:12:27 GMT # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2017-02-22: block: Don't bother asserting type of output visitor's output monitor: Clean up handle_hmp_command() a bit tests: Don't check qobject_type() before qobject_to_qbool() tests: Don't check qobject_type() before qobject_to_qfloat() tests: Don't check qobject_type() before qobject_to_qint() tests: Don't check qobject_type() before qobject_to_qstring() tests: Don't check qobject_type() before qobject_to_qlist() Don't check qobject_type() before qobject_to_qdict() test-qmp-event: Simplify and tighten event_test_emit() libqtest: Clean up qmp_response() a bit check-qjson: Simplify around compare_litqobj_to_qobj() check-qdict: Tighten qdict_crumple_test_recursive() some check-qdict: Simplify qdict_crumple_test_recursive() qdict: Make qdict_get_qlist() safe like qdict_get_qdict() net: Flatten simple union NetLegacyOptions numa: Flatten simple union NumaOptions Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-24Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170222' ↵Peter Maydell1-2/+2
into staging ppc patch queue for 2017-02-22 This pull request has: * Yet more POWER9 instruction implementations * Some extensions to the softfloat code which are necesssary for some of those instructions * Some preliminary patches in preparation for POWER9 softmmu implementation * Igor Mammedov's cleanups to unify hotplug cpu handling across architectures * Assorted bugfixes The softfloat and cpu hotplug changes aren't entirely ppc specific (in fact the hotplug stuff contains some pc specific patches). However they're included here because ppc is one of the main beneficiaries, and the series depend on some ppc specific patches. # gpg: Signature made Wed 22 Feb 2017 06:29:47 GMT # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.9-20170222: (43 commits) hw/ppc/ppc405_uc.c: Avoid integer overflows hw/ppc/spapr: Check for valid page size when hot plugging memory target-ppc: fix Book-E TLB matching hw/net/spapr_llan: 6 byte mac address device tree entry machine: replace query_hotpluggable_cpus() callback with has_hotpluggable_cpus flag machine: unify [pc_|spapr_]query_hotpluggable_cpus() callbacks spapr: reuse machine->possible_cpus instead of cores[] change CPUArchId.cpu type to Object* pc: pass apic_id to pc_find_cpu_slot() directly so lookup could be done without CPU object pc: calculate topology only once when possible_cpus is initialised pc: move pcms->possible_cpus init out of pc_cpus_init() machine: move possible_cpus to MachineState hw/pci-host/prep: Do not use hw_error() in realize function target/ppc/POWER9: Direct all instr and data storage interrupts to the hypv target/ppc/POWER9: Adapt LPCR handling for POWER9 target/ppc/POWER9: Add ISAv3.00 MMU definition target/ppc: Fix LPCR DPFD mask define target-ppc: Add xscvqpudz and xscvqpuwz instructions target-ppc: Implement round to odd variants of quad FP instructions softfloat: Add float128_to_uint32_round_to_zero() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-23util/cutils: Change qemu_strtosz*() from int64_t to uint64_tMarkus Armbruster1-2/+2
This will permit its use in parse_option_size(). Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86) Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core) Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core) Cc: qemu-block@nongnu.org (open list:Block layer core) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1487708048-2131-24-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: Return qemu_strtosz*() error and value separatelyMarkus Armbruster1-2/+3
This makes qemu_strtosz(), qemu_strtosz_mebi() and qemu_strtosz_metric() similar to qemu_strtoi64(), except negative values are rejected. Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86) Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core) Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core) Cc: qemu-block@nongnu.org (open list:Block layer core) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1487708048-2131-23-git-send-email-armbru@redhat.com>
2017-02-23util/cutils: Rename qemu_strtosz() to qemu_strtosz_MiB()Markus Armbruster1-1/+1
With qemu_strtosz(), no suffix means mebibytes. It's used rarely. I'm going to add a similar function where no suffix means bytes. Rename qemu_strtosz() to qemu_strtosz_MiB() to make the name qemu_strtosz() available for the new function. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1487708048-2131-16-git-send-email-armbru@redhat.com>
2017-02-22monitor: Clean up handle_hmp_command() a bitMarkus Armbruster1-4/+5
Leave checking qobject_type(req) to qmp_check_input_obj(). Rework handling of json_parser_parse_err() failing without setting an error. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1487363905-9480-14-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-02-22Don't check qobject_type() before qobject_to_qdict()Markus Armbruster1-2/+2
qobject_to_qdict(obj) returns NULL when obj isn't a QDict. Check that instead of qobject_type(obj) == QTYPE_QDICT. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1487363905-9480-8-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-02-22machine: replace query_hotpluggable_cpus() callback with ↵Igor Mammedov1-2/+2
has_hotpluggable_cpus flag Generic helper machine_query_hotpluggable_cpus() replaced target specific query_hotpluggable_cpus() callbacks so there is no need in it anymore. However inon NULL callback value is used to detect/report hotpluggable cpus support, therefore it can be removed completely. Replace it with MachineClass.has_hotpluggable_cpus boolean which is sufficient for the task. Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-21monitor: Fix crashes when using HMP commands without CPUThomas Huth1-8/+34
When running certain HMP commands ("info registers", "info cpustats", "info tlb", "nmi", "memsave" or dumping virtual memory) with the "none" machine, QEMU crashes with a segmentation fault. This happens because the "none" machine does not have any CPUs by default, but these HMP commands did not check for a valid CPU pointer yet. Add such checks now, so we get an error message about the missing CPU instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1484309555-1935-1-git-send-email-thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-02Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell1-1/+1
into staging # gpg: Signature made Wed 01 Feb 2017 13:44:32 GMT # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: trace: clean up trace-events files qapi: add missing trace_visit_type_enum() call trace: improve error reporting when parsing simpletrace header trace: update docs to reflect new code generation approach trace: switch to modular code generation for sub-directories trace: move setting of group name into Makefiles trace: move hw/i386/xen events to correct subdir trace: move hw/xen events to correct subdir trace: move hw/block/dataplane events to correct subdir make: move top level dir to end of include search path # Conflicts: # Makefile Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-31char: headers clean-upMarc-André Lureau1-0/+1
Those could probably be squashed with earlier patches, however I couldn't easily identify them, test them or check if there are still necessary on various platforms. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2017-01-31trace: switch to modular code generation for sub-directoriesDaniel P. Berrange1-1/+1
Introduce rules in the top level Makefile that are able to generate trace.[ch] files in every subdirectory which has a trace-events file. The top level directory is handled specially, so instead of creating trace.h, it creates trace-root.h. This allows sub-directories to include the top level trace-root.h file, without ambiguity wrt to the trace.g file in the current sub-dir. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170125161417.31949-7-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-27chardev: qom-ifyMarc-André Lureau1-1/+1
Turn Chardev into Object. qemu_chr_alloc() is replaced by the qemu_chardev_new() constructor. It will call qemu_char_open() to open/intialize the chardev with the ChardevCommon *backend settings. The CharDriver::create() callback is turned into a ChardevClass::open() which is called from the newly introduced qemu_chardev_open(). "chardev-gdb" and "chardev-hci" are internal chardev and aren't creatable directly with -chardev. Use a new internal flag to disable them. We may want to use TYPE_USER_CREATABLE interface instead, or perhaps allow -chardev usage. Although in general we keep typename and macros private, unless the type is being used by some other file, in this patch, all types and common helper macros for qemu-char.c are in char.h. This is to help transition now (some types must be declared early, while some aren't shared) and when splitting in several units. This is to be improved later. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27char: rename CharDriverState ChardevMarc-André Lureau1-2/+2
Pick a uniform chardev type name. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27char: introduce generic qemu_chr_get_kind()Marc-André Lureau1-1/+1
This allows to remove the "is_mux" field from CharDriverState. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27memory: hmp: add "-f" for "info mtree"Peter Xu1-1/+3
Adding one more option "-f" for "info mtree" to dump the flat views of all the address spaces. This will be useful to debug the memory rendering logic, also it'll be much easier with it to know what memory region is handling what address range. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1484556005-29701-3-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-20Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+1
* QOM interface fix (Eduardo) * RTC fixes (Gaohuai, Igor) * Memory leak fixes (Li Qiang, me) * Ctrl-a b regression (Marc-André) * Stubs cleanups and fixes (Leif, me) * hxtool tweak (me) * HAX support (Vincent) * QemuThread, exec.c and SCSI fixes (Roman, Xinhua, me) * PC_COMPAT_2_8 fix (Marcelo) * stronger bitmap assertions (Peter) # gpg: Signature made Fri 20 Jan 2017 12:49:01 GMT # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (35 commits) pc.h: move x-mach-use-reliable-get-clock compat entry to PC_COMPAT_2_8 bitmap: assert that start and nr are non negative Revert "win32: don't run subprocess tests on Mingw32 platform" hax: add Darwin support Plumb the HAXM-based hardware acceleration support target/i386: Add Intel HAX files kvm: move cpu synchronization code KVM: PPC: eliminate unnecessary duplicate constants ramblock-notifier: new char: fix ctrl-a b not working exec: Add missing rcu_read_unlock x86: ioapic: fix fail migration when irqchip=split x86: ioapic: dump version for "info ioapic" x86: ioapic: add traces for ioapic hxtool: emit Texinfo headings as @subsection qemu-thread: fix qemu_thread_set_name() race in qemu_thread_create() serial: fix memory leak in serial exit scsi-block: fix direction of BYTCHK test for VERIFY commands pc: fix crash in rtc_set_memory() if initial cpu is marked as hotplugged acpi: filter based on CONFIG_ACPI_X86 rather than TARGET ... # Conflicts: # include/hw/i386/pc.h
2017-01-19kvm: move cpu synchronization codeVincent Palatin1-1/+1
Move the generic cpu_synchronize_ functions to the common hw_accel.h header, in order to prepare for the addition of a second hardware accelerator. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Message-Id: <f5c3cffe8d520011df1c2e5437bb814989b48332.1484045952.git.vpalatin@chromium.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-19error: Report certain hints on stderr when no monitorMarc-André Lureau1-0/+2
Hints printed with error_printf_unless_qmp() are suppressed outside monitor context. Reproducer: $ qemu-system-x86_64 -m 1Z qemu-system-x86_64: -m 1Z: Parameter 'size' expects a size Print to stderr instead. The reproducer now additionally prints: You may use k, M, G or T suffixes for kilobytes, megabytes, gigabytes and terabytes. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170105135957.12003-1-marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-11-01qemu-error: remove dependency of stubs on monitorPaolo Bonzini1-0/+21
Leave the implementation of error_vprintf and error_vprintf_unless_qmp (the latter now trivially wrapped by error_printf_unless_qmp) to libqemustub.a and monitor.c. This has two advantages: it lets us remove the monitor_printf and monitor_vprintf stubs, and it lets tests provide a different implementation of the functions that uses g_test_message. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1477326663-67817-2-git-send-email-pbonzini@redhat.com>
2016-10-28clean-up: removed duplicate #includesAnand J1-2/+0
Some files contain multiple #includes of the same header file. Removed most of those unnecessary duplicate entries using scripts/clean-includes. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Anand J <anand.indukala@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-28monitor: deprecate 'default' optionMarc-André Lureau1-1/+1
This option does nothing since commit 06ac27f. Deprecate it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-25qapi: rename *qmp-*-visitor* to *qobject-*-visitor*Daniel P. Berrange1-1/+1
The QMP visitors have no direct dependency on QMP. It is valid to use them anywhere that one has a QObject. Rename them to better reflect their functionality as a generic QObject to QAPI converter. This is the first of three parts: rename the files. The next two parts will rename C identifiers. The split is necessary to make git rename detection work. Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Split into file and identifier rename, two comments touched up] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-24char: remove explicit_fe_open, use a set_handlers argumentMarc-André Lureau1-2/+2
No need to keep explicit_fe_open around if it affects only a qemu_chr_fe_set_handlers(). Use an additional argument instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: replace qemu_chr_claim/release with qemu_chr_fe_init/deinitMarc-André Lureau1-3/+1
Now that all front end use qemu_chr_fe_init(), we can move chardev claiming in init(), and add a function deinit() to release the chardev and cleanup handlers. The qemu_chr_fe_claim_no_fail() for property are gone, since the property will raise an error instead. In other cases, where there is already an error path, an error is raised instead. Finally, other cases are handled by &error_abort in qemu_chr_fe_init(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: use qemu_chr_fe* functions with CharBackend argumentMarc-André Lureau1-10/+10
This also switches from qemu_chr_add_handlers() to qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now takes the focus when fe_open (qemu_chr_add_handlers() did take the focus) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: remaining switch to CharBackend in frontendMarc-André Lureau1-9/+10
Similar to previous change, for the remaining CharDriverState front ends users. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-13-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-12trace: convert code to use event iteratorsDaniel P. Berrange1-12/+14
This converts the HMP/QMP monitor API implementations and some internal trace control methods to use the new trace event iterator APIs. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 1475588159-30598-5-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-10Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-10-07' into ↵Peter Maydell1-0/+9
staging QAPI patches for 2016-10-07 # gpg: Signature made Fri 07 Oct 2016 18:55:40 BST # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2016-10-07: docs: Belatedly update for move of QMP/* to docs/ docs: Belatedly update for move of qmp-commands.txt qmp: Disable query-cpu-* commands when they're unavailable MAINTAINERS: Pass the QObject staff from Luiz to Markus MAINTAINERS: Pass the HMP staff from Luiz to David qapi: return a 'missing parameter' error qapi: assert list entry has a value qapi: add assert about root value tests/test-qmp-input-strict: Cover missing struct members qapi: Fix crash when 'any' or 'null' parameter is missing qmp: fix object-add assert() without props Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-07qmp: Disable query-cpu-* commands when they're unavailableEduardo Habkost1-0/+9
Instead of requiring clients to actually call the query-cpu-* commands to find out if they are implemented, remove them from the output of "query-commands", so clients know they are not available. This is implemented by extending the existing hack at qmp_unregister_commands_hack(). I wish I could avoid adding even more #ifdefs to that code, but that's the solution we have today. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1475696941-8056-1-git-send-email-ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-04intc: make HMP 'info irq' and 'info pic' commands use InterruptStatsProvider ↵Hervé Poussineau1-6/+0
interface Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <1474921408-24710-6-git-send-email-hpoussin@reactos.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-23monitor: fix crash for platforms without a CPU 0David Gibson1-1/+1
Now that we allow CPU hot unplug on a few platforms, we can end up in a situation where we don't have a CPU with index 0. Or at least we could, if we didn't have code to explicitly prohibit unplug of CPU 0. Longer term we want to allow CPU 0 unplug, this patch is an early step in allowing this, by removing an assumption in the monitor code that CPU 0 always exists. Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: Rewrote commit message to better explain background] Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-19monitor: use qmp_dispatch()Marc-André Lureau1-292/+34
Replace the old manual dispatch and validation code by the generic one provided by qapi common code. Note that it is now possible to call the following commands that used to be disabled by compile-time conditionals: - dump-skeys - query-spice - rtc-reset-reinjection - query-gic-capabilities Their fallback functions return an appropriate "feature disabled" error. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20160912091913.15831-16-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-19monitor: remove mhandler.cmd_newMarc-André Lureau1-8/+5
This is no longer necessary now that we aren't using middle mode anymore. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20160912091913.15831-12-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-19monitor: implement 'qmp_query_commands' without qmp_cmdsMarc-André Lureau1-11/+18
One step towards getting rid of the static qmp_cmds table. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20160912091913.15831-11-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-19monitor: use qmp_find_command() (using generated qapi code)Marc-André Lureau1-7/+7
Stop using the so-called 'middle' mode. Instead, use qmp_find_command() from generated qapi commands registry. Update and fix the documentation too. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20160912091913.15831-10-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-19qmp: Hack to keep commands configuration-specificMarc-André Lureau1-0/+35
We currently define QMP commands in two places: the QAPI schema and qmp-commands.hx. The latter is preprocessed, the former is not. We use the preprocessor to suppress configuration-specific commands. For instance, query-spice is only available #ifdef CONFIG_SPICE. QMP command dispatch and query-commands use the qmp-commands.hx definition, and thus obey the #ifdeffery there. Good, because it lets QMP clients probe for available features more easily. query-qmp-schema uses the QAPI schema, and thus lists the configuration-specific commands even when they're unavailable. Not so good. We're about to flip command dispatch and query-commands to the non-middle-mode command registry, which uses the QAPI schema, so we can ditch qmp-commands.hx. To avoid regressing query-commands, arrange for commands that are suppressed with the preprocessor now to be unregistered with that registry. This will keep them unavailable and out of query-commands when we flip command dispatch and query-commands to that registry, exactly as before. This is a hack. The proper solution is to support configuration-specific commands in the QAPI schema. Mark it FIXME. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20160912091913.15831-8-marcandre.lureau@redhat.com>
2016-09-19monitor: register gen:false commands manuallyMarc-André Lureau1-0/+13
Since a few commands are using 'gen': false, they are not registered automatically by the generator. Register manually instead. This is in preparation for removal of qapi 'middle' mode generation. Note that qmp_init_marshal() function isn't run yet, so the commands aren't actually registered, until module_call_init(MODULE_INIT_QAPI) is added in a later patch. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20160912091913.15831-6-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-19monitor: simplify invalid_qmp_mode()Marc-André Lureau1-5/+5
handle_qmp_command() will switch to use qmp_dispatch(). It won't have a pointer to the marshaller function anymore, but only the name of the command to invoke. Simplify invalid_qmp_mode() so it can just be called with the command name. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20160912091913.15831-5-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-19qapi-schema: use generated marshaller for 'qmp_capabilities'Marc-André Lureau1-2/+2
qapi'fy the 'qmp_capabilities' command, makes the command visible in query-qmp-schema. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20160912091913.15831-3-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-08-08monitor: fix crash when leaving qemu with spice audioMarc-André Lureau1-0/+20
Since aa5cb7f5e, the chardevs are being cleaned up when leaving qemu. However, the monitor has still references to them, which may lead to crashes when running atexit() and trying to send monitor events: #0 0x00007fffdb18f6f5 in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:54 #1 0x00007fffdb1912fa in __GI_abort () at abort.c:89 #2 0x0000555555c263e7 in error_exit (err=22, msg=0x555555d47980 <__func__.13537> "qemu_mutex_lock") at util/qemu-thread-posix.c:39 #3 0x0000555555c26488 in qemu_mutex_lock (mutex=0x5555567a2420) at util/qemu-thread-posix.c:66 #4 0x00005555558c52db in qemu_chr_fe_write (s=0x5555567a2420, buf=0x55555740dc40 "{\"timestamp\": {\"seconds\": 1470041716, \"microseconds\": 989699}, \"event\": \"SPICE_DISCONNECTED\", \"data\": {\"server\": {\"port\": \"5900\", \"family\": \"ipv4\", \"host\": \"127.0.0.1\"}, \"client\": {\"port\": \"40272\", \"f"..., len=240) at qemu-char.c:280 #5 0x0000555555787cad in monitor_flush_locked (mon=0x5555567bd9e0) at /home/elmarco/src/qemu/monitor.c:311 #6 0x0000555555787e46 in monitor_puts (mon=0x5555567bd9e0, str=0x5555567a44ef "") at /home/elmarco/src/qemu/monitor.c:353 #7 0x00005555557880fe in monitor_json_emitter (mon=0x5555567bd9e0, data=0x5555567c73a0) at /home/elmarco/src/qemu/monitor.c:401 #8 0x00005555557882d2 in monitor_qapi_event_emit (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x5555567c73a0) at /home/elmarco/src/qemu/monitor.c:472 #9 0x000055555578838f in monitor_qapi_event_queue (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x5555567c73a0, errp=0x7fffffffca88) at /home/elmarco/src/qemu/monitor.c:497 #10 0x0000555555c15541 in qapi_event_send_spice_disconnected (server=0x5555571139d0, client=0x5555570d0db0, errp=0x5555566c0428 <error_abort>) at qapi-event.c:1038 #11 0x0000555555b11bc6 in channel_event (event=3, info=0x5555570d6c00) at ui/spice-core.c:248 #12 0x00007fffdcc9983a in adapter_channel_event (event=3, info=0x5555570d6c00) at reds.c:120 #13 0x00007fffdcc99a25 in reds_handle_channel_event (reds=0x5555567a9d60, event=3, info=0x5555570d6c00) at reds.c:324 #14 0x00007fffdcc7d4c4 in main_dispatcher_self_handle_channel_event (self=0x5555567b28b0, event=3, info=0x5555570d6c00) at main-dispatcher.c:175 #15 0x00007fffdcc7d5b1 in main_dispatcher_channel_event (self=0x5555567b28b0, event=3, info=0x5555570d6c00) at main-dispatcher.c:194 #16 0x00007fffdcca7674 in reds_stream_push_channel_event (s=0x5555570d9910, event=3) at reds-stream.c:354 #17 0x00007fffdcca749b in reds_stream_free (s=0x5555570d9910) at reds-stream.c:323 #18 0x00007fffdccb5dad in snd_disconnect_channel (channel=0x5555576a89a0) at sound.c:229 #19 0x00007fffdccb9e57 in snd_detach_common (worker=0x555557739720) at sound.c:1589 #20 0x00007fffdccb9f0e in snd_detach_playback (sin=0x5555569fe3f8) at sound.c:1602 #21 0x00007fffdcca3373 in spice_server_remove_interface (sin=0x5555569fe3f8) at reds.c:3387 #22 0x00005555558ff6e2 in line_out_fini (hw=0x5555569fe370) at audio/spiceaudio.c:152 #23 0x00005555558f909e in audio_atexit () at audio/audio.c:1754 #24 0x00007fffdb1941e8 in __run_exit_handlers (status=0, listp=0x7fffdb5175d8 <__exit_funcs>, run_list_atexit=run_list_atexit@entry=true) at exit.c:82 #25 0x00007fffdb194235 in __GI_exit (status=<optimized out>) at exit.c:104 #26 0x00007fffdb17b738 in __libc_start_main (main=0x5555558d7874 <main>, argc=67, argv=0x7fffffffcf48, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffcf38) at ../csu/libc-start.c:323 Add a monitor_cleanup() functions to remove all the monitors before cleaning up the chardev. Note that we are "losing" some events that used to be sent during atexit(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20160801112343.29082-2-marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19qapi: Change Netdev into a flat unionEric Blake1-7/+7
This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-18trace: Add QAPI/QMP interfaces to query and control per-vCPU tracing stateLluís Vilanova1-2/+15
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-18trace: Allow event name pattern in "info trace-events"Lluís Vilanova1-1/+30
Homogenizes the command capabilities with QMP. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-12Drop Emacs local variables lists redundant with .dir-locals.elMarkus Armbruster1-9/+0
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-29 06:25:38 +0000