summaryrefslogtreecommitdiff
path: root/net/net.c
AgeCommit message (Collapse)AuthorFilesLines
2016-04-06net: fix OptsVisitor memory leakPaolo Bonzini1-0/+1
Fixes 96a1616("qapi-dealloc: Reduce use outside of generated code") Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-04-06net: Allocating Large sized arrays to heapPooja Dhannawat1-4/+9
nc_sendv_compat has a huge stack usage of 69680 bytes approx. Moving large arrays to heap to reduce stack usage. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Pooja Dhannawat <dhannawatpooja1@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-04-06util: Improved qemu_hexmap() to include an ascii dump of the bufferIsaac Lozano1-29/+1
qemu_hexdump() in util/hexdump.c has been changed to give also include a ascii dump of the buffer. Also, calls to hex_dump() in net/net.c have been replaced with calls to qemu_hexdump(). This takes care of two misc BiteSized Tasks. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Isaac Lozano <109lozanoi@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-31Fix ipv6 options according to documentationSamuel Thibault1-7/+7
The options names were fixed in the qapi layer, but not in the command-line options. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa1-0/+2
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-18qapi: Don't special-case simple union wrappersEric Blake1-2/+2
Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-15qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addressesYann Bordenave1-0/+31
This patch adds parameters to manage some new options in the qemu -net command. Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in argument to the qemu command. Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3. Signed-off-by: Yann Bordenave <meow@meowstars.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-04qapi-dealloc: Reduce use outside of generated codeEric Blake1-21/+10
No need to roll our own use of the dealloc visitors when we can just directly use the qapi_free_FOO() functions that do what we want in one line. In net.c, inline net_visit() into its remaining lone caller. After this patch, test-visitor-serialization.c is the only non-generated file that needs to use a dealloc visitor, because it is testing low level aspects of the visitor interface. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1456262075-3311-2-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake1-2/+2
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-04net: Clean up includesPeter Maydell1-1/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-11-git-send-email-peter.maydell@linaro.org
2016-02-04net/filter: Fix the output information for command 'info network'zhanghailiang1-3/+29
The properties of netfilter object could be changed by 'qom-set' command, but the output of 'info network' command is not updated, because it got the old information through nf->info_str, it will not be updated while we change the value of netfilter's property. Here we split a helper function that could collect the output information for filter, and also remove the useless member 'info_str' from struct NetFilterState. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Yang Hongyang <hongyang.yang@easystack.cn> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04net: always walk through filters in reverse if traffic is egressLi Zhijian1-5/+15
Previously, if we attach more than one filters for a single netdev, both ingress and egress traffic will go through net filters in same order like: ingress: netdev ->filter1 ->filter2 ->...filter[n] ->emulated device egress: emulated device ->filter1 ->filter2 ->...filter[n] ->netdev. This is against the natural feeling and will complicate filters configuration since in some scenes, we hope filters handle the egress traffic in a reverse order. For example, in colo-proxy (will be implemented later), we have a redirector filter and a colo-rewriter filter, we need the filter behave like: ingress(->)/egress(<-): chardev<->redirector<->colo-rewriter<->emulated device Since both buffer filter and dump do not require strict order of filters, this patch switches to always let egress traffic walk through net filters in reverse to simplify the possible filters configuration in the future. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-12-17qapi: Don't let implicit enum MAX member collideEric Blake1-2/+2
Now that we guarantee the user doesn't have any enum values beginning with a single underscore, we can use that for our own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious that the sentinel is generated. This patch was mostly generated by applying a temporary patch: |diff --git a/scripts/qapi.py b/scripts/qapi.py |index e6d014b..b862ec9 100644 |--- a/scripts/qapi.py |+++ b/scripts/qapi.py |@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = { | max_index = c_enum_const(name, 'MAX', prefix) | ret += mcgen(''' | [%(max_index)s] = NULL, |+// %(max_index)s | }; | ''', | max_index=max_index) then running: $ cat qapi-{types,event}.c tests/test-qapi-types.c | sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list $ git grep -l _MAX | xargs sed -i -f list The only things not generated are the changes in scripts/qapi.py. Rejecting enum members named 'MAX' is now useless, and will be dropped in the next patch. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> [Rebased to current master, commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-02net: Convert to new qapi union layoutEric Blake1-12/+12
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for net-related code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-18-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-10-27net: free the string returned by object_get_canonical_path_componentYang Hongyang1-2/+3
The value returned from object_get_canonical_path_component must be freed. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-27net: make iov_to_buf take right size argument in nc_sendv_compat()Yang Hongyang1-1/+1
We want "buf, sizeof(buf)" here. sizeof(buffer) is the size of a pointer, which is wrong. Thanks to Paolo for pointing it out. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-27net: Remove duplicate data from query-rx-filter on multiqueue net devicesVladislav Yasevich1-0/+6
When responding to a query-rx-filter command on a multiqueue netdev, qemu reports the data for each queue. The data, however, is not per-queue, but per device and the same data is reported multiple times. This causes confusion and may also cause extra unnecessary processing when looking at the data. Commit 638fb14169 (net: Make qmp_query_rx_filter() with name argument more obvious) partially addresses this issue, by limiting the output when the name is specified. However, when the name is not specified, the issue still persists. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-21net: don't set native endiannessMichael S. Tsirkin1-0/+8
commit 5be7d9f1b1452613b95c6ba70b8d7ad3d0797991 vhost-net: tell tap backend about the vnet endianness makes vhost net always try to set LE - even if that matches the native endian-ness. This makes it fail on older kernels on x86 without TUNSETVNETLE support. To fix, make qemu_set_vnet_le/qemu_set_vnet_be skip the ioctl if it matches the host endian-ness. Reported-by: Marcel Apfelbaum <marcel@redhat.com> Cc: Greg Kurz <gkurz@linux.vnet.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-10-12netfilter: print filter info associate with the netdevYang Hongyang1-0/+11
When execute "info network", print filter info also. add a info_str member to NetFilterState, store specific filters info. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12net/queue: introduce NetQueueDeliverFuncYang Hongyang1-1/+1
net/queue.c has logic to send/queue/flush packets but a qemu_deliver_packet_iov() call is hardcoded. Abstract this func so that we can use our own deliver function in netfilter. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12net: merge qemu_deliver_packet and qemu_deliver_packet_iovYang Hongyang1-35/+16
qemu_deliver_packet_iov already have the compat delivery, we can drop qemu_deliver_packet. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12netfilter: hook packets before net queue sendYang Hongyang1-0/+66
Capture packets that will be sent. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12init/cleanup of netfilter objectYang Hongyang1-0/+7
Add a netfilter object based on QOM. A netfilter is attached to a netdev, captures all network packets that pass through the netdev. When we delete the netdev, we also delete the netfilter object attached to it, because if the netdev is removed, the filter which attached to it is useless. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-07-20net: Flush queued packets when guest resumesFam Zheng1-7/+12
Since commit 6e99c63 "net/socket: Drop net_socket_can_send" and friends, net queues need to be explicitly flushed after qemu_can_send_packet() returns false, because the netdev side will disable the polling of fd. This fixes the case of "cont" after "stop" (or migration). Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1436232067-29144-1-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-24net: simplify net_client_init1()Stefan Hajnoczi1-22/+16
Drop the union and move the hubport creation into the !is_netdev case. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1432743412-15943-6-git-send-email-stefanha@redhat.com
2015-06-24net: drop if expression that is always trueStefan Hajnoczi1-17/+14
Both is_netdev and !is_netdev paths already check that net_client_init_func[opts->kind] is non-NULL so there is no need for the if statement. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1432743412-15943-5-git-send-email-stefanha@redhat.com
2015-06-24net: raise an error if -net type is invalidStefan Hajnoczi1-0/+11
When a -net type is used that was not compiled into the binary there should be an error message. Note the special case for -net none, which is a no-op. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1432743412-15943-4-git-send-email-stefanha@redhat.com
2015-06-24net: replace net_client_init1() netdev whitelist with blacklistStefan Hajnoczi1-25/+3
It's cumbersome to keep the whitelist up-to-date. New netdev backends should most likely be allowed so a blacklist makes more sense than a whitelist. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1432743412-15943-3-git-send-email-stefanha@redhat.com
2015-06-24net: add missing "netmap" to host_net_devices[]Stefan Hajnoczi1-0/+3
Although hmp-commands.hx lists "netmap" as a valid host_net_add type, the command rejects it because it's missing from the list. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1432743412-15943-2-git-send-email-stefanha@redhat.com
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster1-0/+1
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Move #include out of qerror.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qmp: Wean off qerror_report()Markus Armbruster1-10/+6
The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster1-6/+6
These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Eliminate QERR_DEVICE_NOT_FOUNDMarkus Armbruster1-2/+4
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used in new code. Hiding them in QERR_ macros makes new uses hard to spot. Fortunately, there's just one such macro left. Eliminate it with this coccinelle semantic patch: @@ expression EP, E; @@ -error_set(EP, QERR_DEVICE_NOT_FOUND, E) +error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22QemuOpts: Wean off qerror_report_err()Markus Armbruster1-2/+3
qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. The only remaining user in qemu-option.c is qemu_opts_parse(). Is it used in QMP context? If not, we can simply replace qerror_report_err() by error_report_err(). The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are clearly not in QMP context. The uses in vl.c aren't either, because the only QMP command handlers there are qmp_query_status() and qmp_query_machines(), and they don't call it. Remaining uses: * drive_def(): Command line -drive and such, HMP drive_add and pci_add * hmp_chardev_add(): HMP chardev-add * monitor_parse_command(): HMP core * tmp_config_parse(): Command line -tpmdev * net_host_device_add(): HMP host_net_add * net_client_parse(): Command line -net and -netdev * qemu_global_option(): Command line -global * vnc_parse_func(): Command line -display, -vnc, default display, HMP change, QMP change. Bummer. * qemu_pci_hot_add_nic(): HMP pci_add * usb_net_init(): Command line -usbdevice, HMP usb_add Propagate errors through qemu_opts_parse(). Create a convenience function qemu_opts_parse_noisily() that passes errors to error_report_err(). Switch all non-QMP users outside tests to it. That leaves vnc_parse_func(). Propagate errors through it. Since I'm touching it anyway, rename it to vnc_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-19Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-0/+18
virtio, pci fixes, enhancements Most notably this includes virtio cross-endian patches. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri Jun 19 11:18:05 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: vhost: enable vhost without without MSI-X pci: Don't register a specialized 'config_write' if default behavior is intended hw/core: rebase sysbus_get_fw_dev_path() to g_strdup_printf() vhost_net: re-enable when cross endian vhost-net: tell tap backend about the vnet endianness tap: fix non-linux build tap: add VNET_LE/VNET_BE operations vhost: set vring endianness for legacy virtio virtio: introduce virtio_legacy_is_cross_endian() linux-headers: sync vhost.h vhost-user: part of virtio Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-17tap: add VNET_LE/VNET_BE operationsGreg Kurz1-0/+18
The linux tap and macvtap backends can be told to parse vnet headers according to little or big endian. This is done through the TUNSETVNETLE and TUNSETVNETBE ioctls. This patch brings all the plumbing for QEMU to use these APIs. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-09QemuOpts: Convert qemu_opts_foreach() to ErrorMarkus Armbruster1-4/+5
Retain the function value for now, to permit selective conversion of its callers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
2015-06-08QemuOpts: Drop qemu_opts_foreach() parameter abort_on_failureMarkus Armbruster1-2/+3
When the argument is non-zero, qemu_opts_foreach() stops on callback returning non-zero, and returns that value. When the argument is zero, it doesn't stop, and returns the bit-wise inclusive or of all the return values. Funky :) The callers that pass zero could just as well pass one, because their callbacks can't return anything but zero: * qemu_add_globals()'s callback qdev_add_one_global() * qemu_config_write()'s callback config_write_opts() * main()'s callbacks default_driver_check(), drive_enable_snapshot(), vnc_init_func() Drop the parameter, and always stop. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
2015-05-27net/net: Record usage status of mac addressShannon Zhao1-4/+55
Currently QEMU dynamically generates mac address for the NIC which doesn't specify the mac address. But when we hotplug a NIC without specifying mac address, the mac address will increase for the same NIC along with hotplug and hot-unplug, and at last it will overflow. And if we codeplug one NIC with mac address e.g. "52:54:00:12:34:56", then hotplug one NIC without specifying mac address and the mac address of the hotplugged NIC is duplicate of "52:54:00:12:34:56". This patch add a mac_table to record the usage status and free the mac address when the NIC is unrealized. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27net: Improve -net nic error reportingMarkus Armbruster1-6/+6
When -net nic fails, it first reports a specific error, then a generic one, like this: $ qemu-system-x86_64 -net nic,netdev=nonexistent qemu-system-x86_64: -net nic,netdev=nonexistent: netdev 'nonexistent' not found qemu-system-x86_64: -net nic,netdev=nonexistent: Device 'nic' could not be initialized Convert net_init_nic() to Error to get rid of the unwanted second error message. While there, tidy up an Overcapitalized Error Message. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-4-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27net: Permit incremental conversion of init functions to ErrorMarkus Armbruster1-6/+9
Error reporting for netdev_add is broken: the net_client_init_fun[] report the actual errors with (at best) error_report(), and their caller net_client_init1() makes up a generic error on top. For command line and HMP, this produces an mildly ugly error cascade. In QMP, the actual errors go to stderr, and the generic error becomes the command's error reply. To fix this, we need to convert the net_client_init_fun[] to Error. To permit fixing them one by one, add an Error ** parameter to the net_client_init_fun[]. If the call fails without returning an Error, make up the same generic Error as before. But if it returns one, use that instead. Since none of them does so far, no functional change. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-3-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27net: Improve error message for -net hubport a bitMarkus Armbruster1-0/+5
Type "hubport" is valid only with -netdev. Unfortunately, that's detected late and the error message doesn't explain why: $ qemu-system-i386 -net hubport,id=foo,hubid=0 qemu-system-i386: -net hubport,id=foo,hubid=0: Device 'hubport' could not be initialized Improve the error message to "Parameter 'type' expects a net type". Not fixed: -net hubport without the parameters required by -netdev hubport still asks for those parameters: $ qemu-system-i386 -net hubport qemu-system-i386: -net hubport: Parameter 'hubid' is missing Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-2-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-11net: add MAC address string printerScott Feldman1-0/+7
We can use this in virtio-net code as well as new Rocker driver code, so up-level this. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1426306173-24884-2-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-12net: synchronize net_host_device_remove with host_net_remove_completionPaolo Bonzini1-3/+3
Using net_host_check_device is unnecessary. qemu_del_net_client asserts for the non-peer case that it can only process NIC type NetClientStates, and that assertion is valid for the peered case as well, so move it and use the same check in net_host_device_remove. host_net_remove_completion is already checking the type. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Message-id: 1419353600-30519-2-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-26QemuOpts: Drop qemu_opt_set(), rename qemu_opt_set_err(), fix useMarkus Armbruster1-1/+1
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the error with qerror_report_err(). Most of its users assume the function can't fail. Make them use qemu_opt_set_err() with &error_abort, so that should the assumption ever break, it'll break noisily. Just two users remain, in util/qemu-config.c. Switch them to qemu_opt_set_err() as well, then rename qemu_opt_set_err() to qemu_opt_set(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26QemuOpts: Convert qemu_opts_set() to Error, fix its useMarkus Armbruster1-2/+2
Return the Error object instead of reporting it with qerror_report_err(). Change callers that assume the function can't fail to pass &error_abort, so that should the assumption ever break, it'll break noisily. Turns out all callers outside its unit test assume that. We could drop the Error ** argument, but that would make the interface less regular, so don't. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-02-18' ↵Peter Maydell1-6/+3
into staging Clean up around error_get_pretty(), qerror_report_err() # gpg: Signature made Wed Feb 18 10:10:07 2015 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-error-2015-02-18: qemu-char: Avoid qerror_report_err() outside QMP command handlers qemu-img: Avoid qerror_report_err() outside QMP command handlers vl: Avoid qerror_report_err() outside QMP command handlers tpm: Avoid qerror_report_err() outside QMP command handlers numa: Avoid qerror_report_err() outside QMP command handlers net: Avoid qerror_report_err() outside QMP command handlers monitor: Avoid qerror_report_err() outside QMP command handlers monitor: Clean up around monitor_handle_fd_param() error: Use error_report_err() where appropriate error: New convenience function error_report_err() vhost-scsi: Improve error reporting for invalid vhostfd Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-18hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()Markus Armbruster1-1/+1
Some are called do_info_SUBCOMMAND() (old ones, usually), some hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND pointlessly differs in spelling. Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the subcommand name with '-' replaced by '_'. Exceptions: * sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(), sun4m_hmp_info_pic(). * lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(), lm32_hmp_info_pic(). Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18hmp: Name HMP command handler functions hmp_COMMAND()Markus Armbruster1-2/+2
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(), and sometimes COMMAND pointlessly differs in spelling. Normalize to hmp_COMMAND(), where COMMAND is exactly the command name with '-' replaced by '_'. Exceptions: * do_device_add() and client_migrate_info() *not* renamed to hmp_device_add(), hmp_client_migrate_info(), because they're also QMP handlers. They still need to be converted to QAPI. * do_memory_dump(), do_physical_memory_dump(), do_ioport_read(), do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(), hmp_i(), hmp_o(), because those names are too cryptic for my taste. * do_info_help() renamed to hmp_info_help() instead of hmp_info(), because it only covers help. Signed-off-by: Markus Armbruster <armbru@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-27 13:57:03 +0000