summaryrefslogtreecommitdiff
path: root/numa.c
AgeCommit message (Collapse)AuthorFilesLines
2016-08-07numa: do not leak NumaOptionsMarc-André Lureau1-7/+8
In all cases, call qapi_free_NumaOptions(), by using a common ending block. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-08-02numa: set the memory backend "is_mapped" fieldGreg Kurz1-0/+1
Commit 2aece63 "hostmem: detect host backend memory is being used properly" added a way to know if a memory backend is busy or available for use. It caused a slight regression if we pass the same backend to a NUMA node and to a pc-dimm device: -m 1G,slots=2,maxmem=2G \ -object memory-backend-ram,size=1G,id=mem-mem1 \ -device pc-dimm,id=dimm-mem1,memdev=mem-mem1 \ -numa node,nodeid=0,memdev=mem-mem1 Before commit 2aece63, this would cause QEMU to print an error message and to exit gracefully: qemu-system-ppc64: -device pc-dimm,id=dimm-mem1,memdev=mem-mem1: can't use already busy memdev: mem-mem1 Since commit 2aece63, QEMU hits an assertion in the memory code: qemu-system-ppc64: memory.c:1934: memory_region_add_subregion_common: Assertion `!subregion->container' failed. Aborted This happens because pc-dimm devices don't use memory_region_is_mapped() anymore and cannot guess the backend is already used by a NUMA node. Let's revert to the previous behavior by turning the NUMA code to also call host_memory_backend_set_mapped() when it uses a backend. Fixes: 2aece63c8a9d2c3a8ff41d2febc4cdeff2633331 Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <146891691503.15642.9817215371777203794.stgit@bahia.lan> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-06opts-visitor: Favor new visit_free() functionEric Blake1-3/+3
Now that we have a polymorphic visit_free(), we no longer need opts_visitor_cleanup(); which in turn means we no longer need to return a subtype from opts_visitor_new() nor a public upcast function. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-6-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-18qapi: Don't special-case simple union wrappersEric Blake1-2/+2
Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-04qapi-dealloc: Reduce use outside of generated codeEric Blake1-8/+1
No need to roll our own use of the dealloc visitors when we can just directly use the qapi_free_FOO() functions that do what we want in one line. In net.c, inline net_visit() into its remaining lone caller. After this patch, test-visitor-serialization.c is the only non-generated file that needs to use a dealloc visitor, because it is testing low level aspects of the visitor interface. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1456262075-3311-2-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake1-3/+3
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-04all: Clean up includesPeter Maydell1-0/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
2016-01-26memory: exit when hugepage allocation fails if mem-preallocLuiz Capitulino1-4/+7
When -mem-prealloc is passed on the command-line, the expected behavior is to exit if the hugepage allocation fails. However, this behavior is broken since commit cc57501dee which made hugepage allocation fall back to regular ram in case of faliure. This commit restores the expected behavior for -mem-prealloc. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Message-Id: <20160122091501.75bbd42a@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-13Use error_fatal to simplify obvious fatal errorsMarkus Armbruster1-6/+2
Done with this Coccinelle semantic patch: @@ type T; identifier FUN, RET; expression list ARGS; expression ERR, EC; @@ ( - T RET = FUN(ARGS, &ERR); + T RET = FUN(ARGS, &error_fatal); | - RET = FUN(ARGS, &ERR); + RET = FUN(ARGS, &error_fatal); | - FUN(ARGS, &ERR); + FUN(ARGS, &error_fatal); ) - if (ERR != NULL) { - error_report_err(ERR); - exit(EC); - } This is actually a more elegant version of my initial semantic patch by courtesy of Eduardo. It leaves dead Error * variables behind, cleaned up manually. Cc: qemu-arm@nongnu.org Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2015-12-18numa: Clean up query-memdev error handlingMarkus Armbruster1-49/+10
qmp_query_memdev() has two error paths: * When object_get_objects_root() returns null. It never does, so simply drop the useless error handling. * When query_memdev() fails. It leaks err then. But any failure there is actually a programming error. Switch it to &error_abort, and drop the useless error handling. Messed up in commit 76b5d85 "qmp: add query-memdev". Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-11-02memory: Convert to new qapi union layoutEric Blake1-4/+4
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for memory-related code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-21-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-18Fix bad error handling after memory_region_init_ram()Markus Armbruster1-2/+2
Symptom: $ qemu-system-x86_64 -m 10000000 Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456: upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory Aborted (core dumped) Root cause: commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place, ram_block_add(). The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The three places are: * memory_region_init_ram() Commit 4994653 (right after commit ef701d7) lifted the error handling further, through memory_region_init_ram(), multiplying the incorrect use of &error_abort. Later on, imitation of existing (bad) code may have created more. * memory_region_init_ram_ptr() The &error_abort is still there. * memory_region_init_rom_device() Doesn't need fixing, because commit 33e0eb5 (soon after commit ef701d7) lifted the error handling further, and in the process changed it from &error_abort to passing it up the call chain. Correct, because the callers are realize() methods. Fix the error handling after memory_region_init_ram() with a Coccinelle semantic patch: @r@ expression mr, owner, name, size, err; position p; @@ memory_region_init_ram(mr, owner, name, size, ( - &error_abort + &error_fatal | err@p ) ); @script:python@ p << r.p; @@ print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column) When the last argument is &error_abort, it gets replaced by &error_fatal. This is the fix. If the last argument is anything else, its position is reported. This lets us check the fix is complete. Four positions get reported: * ram_backend_memory_alloc() Error is passed up the call chain, ultimately through user_creatable_complete(). As far as I can tell, it's callers all handle the error sanely. * fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize() DeviceClass.realize() methods, errors handled sanely further up the call chain. We're good. Test case again behaves: $ qemu-system-x86_64 -m 10000000 qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory [Exit 1 ] The next commits will repair the rest of commit ef701d7's damage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-11maint: remove double semicolons in many filesDaniel P. Berrange1-1/+1
A number of source files have statements accidentally terminated by a double semicolon - eg 'foo = bar;;'. This is harmless but a mistake none the less. The tcg/ia64/tcg-target.c file is whitelisted because it has valid use of ';;' in a comment containing assembly code. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-07-15numa: Fix memory leak in numa_set_mem_node_id()Bharata B Rao1-1/+2
Fix a memory leak in numa_set_mem_node_id(). Signed-off-by: Bharata B Rao <bharata@linux.vnet.com> Reported-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-07-03numa: API to lookup NUMA node by addressBharata B Rao1-0/+41
Introduce an API numa_get_node(ram_addr_t addr, Error **errp) that returns the NUMA node to which the given address belongs to. This API works uniformly for both boot time as well as hotplugged memory. This API is needed by sPAPR PowerPC to support ibm,dynamic-reconfiguration-memory device tree node which is needed for memory hotplug. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-07-03numa: Store boot memory address range in node_infoBharata B Rao1-0/+27
Store memory address range information of boot memory in address range list of numa_info. This helps to have a common NUMA node lookup by address function that works for both boot-time memory and hotplugged memory. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-07-03numa,pc-dimm: Store pc-dimm memory information in numa_infoBharata B Rao1-0/+26
Start storing the (start_addr, end_addr) of the pc-dimm memory in corresponding numa_info[node] so that this information can be used to lookup node by address. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster1-1/+0
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-19qom: Don't pass string table to object_get_enum() functionDaniel P. Berrange1-1/+1
Now that properties can be explicitly registered as an enum type, there is no need to pass the string table to the object_get_enum() function. The object property registration already has a pointer to the string table. In changing this method signature, the hostmem backend object has to be converted to use the new enum property registration code, which simplifies it somewhat. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-19qom: Add helper function for getting user objects rootDaniel P. Berrange1-1/+1
Add object_get_objects_root() function which is a convenience for obtaining the Object * located at /objects in the object composition tree. Convert existing code over to use the new API where appropriate. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-09QemuOpts: Convert qemu_opts_foreach() to ErrorMarkus Armbruster1-2/+2
Retain the function value for now, to permit selective conversion of its callers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
2015-06-08QemuOpts: Drop qemu_opts_foreach() parameter abort_on_failureMarkus Armbruster1-2/+1
When the argument is non-zero, qemu_opts_foreach() stops on callback returning non-zero, and returns that value. When the argument is zero, it doesn't stop, and returns the bit-wise inclusive or of all the return values. Funky :) The callers that pass zero could just as well pass one, because their callbacks can't return anything but zero: * qemu_add_globals()'s callback qdev_add_one_global() * qemu_config_write()'s callback config_write_opts() * main()'s callbacks default_driver_check(), drive_enable_snapshot(), vnc_init_func() Drop the parameter, and always stop. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
2015-03-19numa: Print warning if no node is assigned to a CPUEduardo Habkost1-0/+10
We need all possible CPUs (including hotplug ones) to be present in the SRAT when QEMU starts. QEMU already does that correctly today, the only problem is that when a CPU is omitted from the NUMA configuration, it is silently assigned to node 0. Check if all CPUs up to max_cpus are present in the NUMA configuration and warn about missing CPUs. Make it just a warning, to allow management software to be updated if necessary. In the future we may make it a fatal error instead. Command-line examples: * Correct, no warning: $ qemu-system-x86_64 -smp 2,maxcpus=4 $ qemu-system-x86_64 -smp 2,maxcpus=4 -numa node,cpus=0-3 * Incomplete, with warnings: $ qemu-system-x86_64 -smp 2,maxcpus=4 -numa node,cpus=0 qemu-system-x86_64: warning: CPU(s) not present in any NUMA nodes: 1 2 3 qemu-system-x86_64: warning: All CPU(s) up to maxcpus should be described in NUMA config $ qemu-system-x86_64 -smp 2,maxcpus=4 -numa node,cpus=0-2 qemu-system-x86_64: warning: CPU(s) not present in any NUMA nodes: 3 qemu-system-x86_64: warning: All CPU(s) up to maxcpus should be described in NUMA config Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> --- v1 -> v2: (no changes) v2 -> v3: * Use enumerate_cpus() and error_report() for error message * Simplify logic using bitmap_full() v3 -> v4: * Clarify error message, mention that all CPUs up to maxcpus need to be described in NUMA config v4 -> v5: * Commit log update, to make problem description clearer
2015-03-19numa: introduce machine callback for VCPU to node mappingIgor Mammedov1-5/+13
Current default round-robin way of distributing VCPUs among NUMA nodes might be wrong in case on multi-core/threads CPUs. Making guests confused wrt topology where cores from the same socket are on different nodes. Allow a machine to override default mapping by providing MachineClass::cpu_index_to_socket_id() callback which would allow it group VCPUs from a socket on the same NUMA node. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-03-19numa: Reject configuration if CPU appears on multiple nodesEduardo Habkost1-0/+37
Each CPU can appear in only one NUMA node on the NUMA config. Reject configuration if a CPU appears in multiple nodes. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-03-19numa: Reject CPU indexes > max_cpusEduardo Habkost1-3/+5
CPU index is always less than max_cpus, as documented at sysemu.h: > The following shall be true for all CPUs: > cpu->cpu_index < max_cpus <= MAX_CPUMASK_BITS Reject configuration which uses invalid CPU indexes. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-03-19numa: Fix off-by-one error at MAX_CPUMASK_BITS checkEduardo Habkost1-2/+2
Fix the CPU index check to ensure we don't go beyond the size of the node_cpu bitmap. CPU index is always less than MAX_CPUMASK_BITS, as documented at sysemu.h: > The following shall be true for all CPUs: > cpu->cpu_index < max_cpus <= MAX_CPUMASK_BITS Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-03-10numa: remove superfluous '\n' around error_setgGonglei1-3/+3
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-02Merge remote-tracking branch 'remotes/ehabkost/tags/numa-pull-request' into ↵Peter Maydell1-4/+16
staging NUMA fixes queue # gpg: Signature made Mon Feb 23 19:28:42 2015 GMT using RSA key ID 984DC5A6 # gpg: Can't check signature: public key not found * remotes/ehabkost/tags/numa-pull-request: numa: Rename set_numa_modes() to numa_post_machine_init() numa: Rename option parsing functions numa: Move QemuOpts parsing to set_numa_nodes() numa: Make max_numa_nodeid static numa: Move NUMA globals to numa.c vl.c: Remove unnecessary zero-initialization of NUMA globals numa: Move NUMA declarations from sysemu.h to numa.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-23numa: Rename set_numa_modes() to numa_post_machine_init()Eduardo Habkost1-1/+1
This function does some initialization that needs to be done after machine init. The function may be eventually removed if we move the CPUState.numa_node initialization to the CPU init code, but while the function exists, lets give it a name that makes sense. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-23numa: Rename option parsing functionsEduardo Habkost1-3/+3
Renaming set_numa_nodes() and numa_init_func() to parse_numa_opts() and parse_numa() makes the purpose of those functions clearer. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-23numa: Move QemuOpts parsing to set_numa_nodes()Eduardo Habkost1-1/+8
This allows us to make numa_init_func() static. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-23numa: Make max_numa_nodeid staticEduardo Habkost1-1/+3
Now the only code that uses the variable is inside numa.c. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-23numa: Move NUMA globals to numa.cEduardo Habkost1-0/+3
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-23numa: Move NUMA declarations from sysemu.h to numa.hEduardo Habkost1-1/+1
Not all sysemu.h users need the NUMA declarations, and keeping them in a separate file makes it easier to see what are the interfaces provided by numa.c. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-02-18numa: Avoid qerror_report_err() outside QMP command handlersMarkus Armbruster1-5/+3
qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. Replace by error_report_err() in initial startup helper numa_init_func() and board setup helper memory_region_allocate_system_memory(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-11-11numa: make 'info numa' take into account hotplugged memoryzhanghailiang1-0/+38
When do memory hotplug, if there is numa node, we should add the memory size to the corresponding node memory size. It affects the result of hmp command "info numa". Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-09-09memory: add parameter errp to memory_region_init_ramHu Tao1-2/+2
Add parameter errp to memory_region_init_ram and update all call sites to pass in &error_abort. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-02hmp: fix MemdevList memory leakChen Fan1-7/+2
the memdev_list in hmp_info_memdev() is never freed. so we use existent method qapi_free_MemdevList() to free it. and also we can use qapi_free_MemdevList() to replace list loops to clean up the memdev list in error path. Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-09-02query-memdev: fix potential memory leaksChen Fan1-1/+5
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-14numa: show hex number in error message for consistency and prefix them with 0xHu Tao1-2/+2
The error messages before and after patch are: before: qemu-system-x86_64: total memory for NUMA nodes (134217728) should equal RAM size (20000000) after: qemu-system-x86_64: total memory for NUMA nodes (0x8000000) should equal RAM size (0x20000000) Cc: qemu-stable@nongnu.org Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-07-06numa: check for busy memory backendHu Tao1-0/+8
Specifying the same memory backend twice leads to an assert: ./x86_64-softmmu/qemu-system-x86_64 -m 512M -enable-kvm -object memory-backend-ram,size=256M,id=ram0 -numa node,nodeid=0,memdev=ram0 -numa node,nodeid=1,memdev=ram0 qemu-system-x86_64: /scm/qemu/memory.c:1506: memory_region_add_subregion_common: Assertion `!subregion->container' failed. Aborted (core dumped) Detect and exit with an error message instead. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-29numa: Reject configuration if not all node IDs are presentEduardo Habkost1-1/+16
We don't support sparse NUMA node IDs yet, so this changes QEMU to reject configs where not all nodes are present. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-29numa: Reject duplicate node IDsEduardo Habkost1-0/+5
The same nodeid shouldn't appear multiple times in the command-line. In addition to detecting command-line mistakes, this will fix a bug where nb_numa_nodes may become larger than MAX_NODES (and cause out-of-bounds access on the numa_info array). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-29numa: Keep track of NUMA nodes present on the command-lineEduardo Habkost1-0/+2
Based on "enable sparse node numbering" patch from Nishanth Aravamudan, but without the code to actually support sparse node IDs. This just adds the code to keep track of present/non-present nodes on the command-line, without changing any behavior. Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> [Rename max_numa_node to max_numa_nodeid -Eduardo] [Initialize max_numa_nodeid to 0 -Eduardo] [Use MAX() macro when setting max_numa_nodeid -Eduardo] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-29numa: fix commentMichael S. Tsirkin1-1/+1
s/if given for/is given for/; Reported-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-29numa: fix commentMichael S. Tsirkin1-1/+1
Fix up English in comments: s/the each/each/ Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2014-06-19numa: handle mmaped memory allocation failure correctlyIgor Mammedov1-1/+1
when memory_region_init_ram_from_file() fails memory_region_size() will still return size that was provided at region init time. Instead use errp to properly detect error condition. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19qmp: add query-memdevHu Tao1-0/+84
Add qmp command query-memdev to query for information of memory devices Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19hostmem: add property to map memory with MAP_SHAREDPaolo Bonzini1-1/+1
A new "share" property can be used with the "memory-file" backend to map memory with MAP_SHARED instead of MAP_PRIVATE. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>