summaryrefslogtreecommitdiff
path: root/qapi-schema.json
AgeCommit message (Collapse)AuthorFilesLines
2012-09-28block: introduce block job errorPaolo Bonzini1-1/+6
The following behaviors are possible: 'report': The behavior is the same as in 1.1. An I/O error, respectively during a read or a write, will complete the job immediately with an error code. 'ignore': An I/O error, respectively during a read or a write, will be ignored. For streaming, the job will complete with an error and the backing file will be left in place. For mirroring, the sector will be marked again as dirty and re-examined later. 'stop': The job will be paused and the job iostatus will be set to failed or nospace, while the VM will keep running. This can only be specified if the block device has rerror=stop and werror=stop or enospc. 'enospc': Behaves as 'stop' for ENOSPC errors, 'report' for others. In all cases, even for 'report', the I/O error is reported as a QMP event BLOCK_JOB_ERROR, with the same arguments as BLOCK_IO_ERROR. It is possible that while stopping the VM a BLOCK_IO_ERROR event will be reported and will clobber the event from BLOCK_JOB_ERROR, or vice versa. This is not really avoidable since stopping the VM completes all pending I/O requests. In fact, it is already possible now that a series of BLOCK_IO_ERROR events are reported with rerror=stop, because vm_stop calls bdrv_drain_all and this can generate further errors. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28iostatus: move BlockdevOnError declaration to QAPIPaolo Bonzini1-0/+23
This will let block-stream reuse the enum. Places that used the enums are renamed accordingly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28qmp: add block-job-pause and block-job-resumePaolo Bonzini1-1/+45
Add QMP commands matching the functionality. Paused jobs cannot be canceled without first resuming them. This ensures that I/O errors are never missed by management. However, an optional force argument can be specified to allow that. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28block: add support for job pause/resumePaolo Bonzini1-1/+4
Job pausing reuses the existing support for cancellable sleeps. A pause happens at the next sleeping point and lasts until the coroutine is re-entered explicitly. Cancellation was already doing a forced resume, so implement it explicitly in terms of resume. Paused jobs cannot be canceled without first resuming them. This ensures that I/O errors are never missed by management. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28qmp: add 'busy' member to BlockJobInfoPaolo Bonzini1-1/+4
Because pausing a job is asynchronous, we need to know whether it has completed. This is described by the "busy" field of BlockJob; copy it to BlockJobInfo. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28QAPI: add command for live block commit, 'block-commit'Jeff Cody1-0/+34
The command for live block commit is added, which has the following arguments: device: the block device to perform the commit on (mandatory) base: the base image to commit into; optional (if not specified, it is the underlying original image) top: the top image of the commit - all data from inside top down to base will be committed into base (mandatory for now; see note, below) speed: maximum speed, in bytes/sec Note: Eventually this command will support merging down the active layer, but that code is not yet complete. If the active layer is passed in as top, then an error will be returned. Once merging down the active layer is supported, the 'top' argument may become optional, and default to the active layer. The is done as a block job, so upon completion a BLOCK_JOB_COMPLETED will be emitted. Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-17Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori1-0/+64
* kwolf/for-anthony: block: Don't forget to delete temporary file Don't require encryption password for 'qemu-img info' command qemu-img: Add json output option to the info command. qapi: Add SnapshotInfo and ImageInfo. ahci: properly reset PxCMD on HBA reset block: fix block tray status vdi: Fix warning from clang block/curl: Fix wrong free statement ide: Fix error messages from static code analysis (no real error) ATAPI: STARTSTOPUNIT only eject/load media if powercondition is 0 sheepdog: fix savevm and loadvm
2012-09-14qapi: Fix enumeration typo errorLei Li1-2/+2
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-09-12qapi: Add SnapshotInfo and ImageInfo.Benoît Canet1-0/+64
Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-10Merge branch 'spice.v59' of git://anongit.freedesktop.org/spice/qemuAurelien Jarno1-1/+4
* 'spice.v59' of git://anongit.freedesktop.org/spice/qemu: Remove #ifdef QXL_COMMAND_FLAG_COMPAT_16BPP qxl: Add set_client_capabilities() interface to QXLInterface spice: make number of surfaces runtime-configurable. configure: print spice-protocol and spice-server versions qxl: add QXL_IO_MONITORS_CONFIG_ASYNC qxl: disallow unknown revisions qxl/update_area_io: guest_bug on invalid parameters spice: increase the verbosity of spice section in "qemu --help" spice: adding seamless-migration option to the command line spice: add 'migrated' flag to spice info spice migration: add QEVENT_SPICE_MIGRATE_COMPLETED spice: notify on vm state change only via spice_server_vm_start/stop spice: notify spice server on vm start/stop spice: abort on invalid streaming cmdline params
2012-09-05qapi: convert screendumpLuiz Capitulino1-0/+13
Next commits will update devices to propagate errors. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05qapi: convert sendkeyAmos Kong1-0/+20
Convert 'sendkey' to use QAPI. QAPI passes key's index of mapping table to qmp_send_key(), not keycode. So we use help functions to convert key/code to index of key_defs, and 'index' will be converted to 'keycode' inside qmp_send_key(). For qmp, QAPI would check invalid key and raise error. For hmp, invalid key is checked in hmp_send_key(). 'send-key' of QMP doesn't support key in hexadecimal format. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05qapi: add the QKeyCode enumAmos Kong1-0/+26
key_defs[] in monitor.c is a mapping table of keys and keycodes, this patch added a QKeyCode enum. Key's index in the enmu is same as keycode's index in key_defs[]. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05spice: add 'migrated' flag to spice infoYonit Halperin1-1/+4
The flag is 'true' when spice migration has completed on the src side. It is needed for a case where libvirt dies before migration completes and it misses the event QEVENT_SPICE_MIGRATE_COMPLETED. When libvirt is restored and queries the migration status, it also needs to query spice and check if its migration has completed. Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-08-22Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori1-7/+7
* qmp/queue/qmp: migration: move total_time from ram stats to migration info monitor: avoid declaring unused variables qapi: Fix memory leak
2012-08-22qapi: add 'query-target' command to return target archDaniel P. Berrange1-0/+39
Add a 'query-target' QAPI command to allow management applications to determine what target architecture a QEMU binary is emulating without having to parse the binary name or -help output $ qmp-shell -p /tmp/qemu (QEMU) query-target { u'return': { u'arch': u'x86_64' }} Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-21migration: move total_time from ram stats to migration infoJuan Quintela1-7/+7
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-08-15qapi: Introduce add-fd, remove-fd, query-fdsetsCorey Bryant1-0/+98
This patch adds support that enables passing of file descriptors to the QEMU monitor where they will be stored in specified file descriptor sets. A file descriptor set can be used by a client like libvirt to store file descriptors for the same file. This allows the client to open a file with different access modes (O_RDWR, O_WRONLY, O_RDONLY) and add/remove the passed fds to/from an fd set as needed. This will allow QEMU to (in a later patch in this series) "open" and "reopen" the same file by dup()ing the fd in the fd set that corresponds to the file, where the fd has the matching access mode flag that QEMU requests. The new QMP commands are: add-fd: Add a file descriptor to an fd set remove-fd: Remove a file descriptor from an fd set query-fdsets: Return information describing all fd sets Note: These commands are not compatible with the existing getfd and closefd QMP commands. Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-13Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori1-73/+119
* qmp/queue/qmp: (48 commits) target-ppc: add implementation of query-cpu-definitions (v2) target-i386: add implementation of query-cpu-definitions (v2) qapi: add query-cpu-definitions command (v2) compiler: add macro for GCC weak symbols qapi: add query-machines command qapi: mark QOM commands stable qmp: introduce device-list-properties command qmp: add SUSPEND_DISK event qmp: qmp-events.txt: add missing doc for the SUSPEND event qmp: qmp-events.txt: put events in alphabetical order qmp: emit the WAKEUP event when the guest is put to run qmp: don't emit the RESET event on wakeup from S3 scripts: qapi-commands.py: qmp-commands.h: include qdict.h docs: writing-qmp-commands.txt: update error section error, qerror: drop QDict member qerror: drop qerror_table and qerror_format() error, qerror: pass desc string to error calls error: drop error_get_qobject()/error_set_qobject() qemu-ga: switch to the new error format on the wire qmp: switch to the new error format on the wire ...
2012-08-13qapi: add query-cpu-definitions command (v2)Anthony Liguori1-0/+23
This command attempts to map to the behavior of -cpu ?. Unfortunately, the output of this command differs wildly across targets. To accommodate this, we use a weak symbol to implement a default version of the command that fails with a QERR_NOT_SUPPORTED error code. Targets can then override and implement this command if it makes sense for them. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-08-13qapi: add query-machines commandAnthony Liguori1-0/+28
This provides the same output as -M ? but in a structured way. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-08-13qapi: mark QOM commands stableAnthony Liguori1-15/+4
We've had a cycle to tweak. It is time to commit to supporting them. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-08-13qmp: introduce device-list-properties commandAnthony Liguori1-0/+28
This can be used in conjunction with qom-list-types to determine the supported set of devices and their parameters. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-08-13qmp: switch to the new error format on the wireLuiz Capitulino1-55/+0
IMPORTANT: this BREAKS QMP's compatibility for the error response. This commit changes QMP's wire protocol to make use of the simpler error format introduced by previous commits. There are two important (and mostly incompatible) changes: 1. Almost all error classes have been replaced by GenericError. The only classes that are still supported for compatibility with libvirt are: CommandNotFound, DeviceNotActive, KVMMissingCap, DeviceNotFound and MigrationExpected 2. The 'data' field of the error dictionary is gone As an example, an error response like: { "error": { "class": "DeviceNotRemovable", "data": { "device": "virtio0" }, "desc": "Device 'virtio0' is not removable" } } Will now be emitted as: { "error": { "class": "GenericError", "desc": "Device 'virtio0' is not removable" } } Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-08-13qapi-schema: add ErrorClass enumLuiz Capitulino1-0/+30
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-08-13qmp: query-block: add 'encryption_key_missing' fieldLuiz Capitulino1-3/+6
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-08-08Add XBZRLE statisticsOrit Wasserman1-1/+27
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com> Signed-off-by: Petter Svard <petters@cs.umu.se> Signed-off-by: Aidan Shribman <aidan.shribman@sap.com> Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08Add migration accounting for normal and duplicate pagesOrit Wasserman1-2/+9
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com> Signed-off-by: Petter Svard <petters@cs.umu.se> Signed-off-by: Aidan Shribman <aidan.shribman@sap.com> Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08Change total_time to total-time in MigrationStatsOrit Wasserman1-2/+2
migration total_time was introduced in commit d5f8a5701d3690b5ec0c34b6a5c0b5a24d274540 for QEMU 1.2 Signed-off-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08Add migrate_set_cache_size commandOrit Wasserman1-0/+27
Change XBZRLE cache size in bytes (the size should be a power of 2, it will be rounded down to the nearest power of 2). If XBZRLE cache size is too small there will be many cache miss. New query-migrate-cache-size QMP command and 'info migrate_cache_size' HMP command to query cache value. Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com> Signed-off-by: Petter Svard <petters@cs.umu.se> Signed-off-by: Aidan Shribman <aidan.shribman@sap.com> Signed-off-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08Add migrate-set-capabilitiesOrit Wasserman1-0/+12
The management can enable/disable a capability for the next migration by using migrate-set-capabilities QMP command. The user can use migrate_set_capability HMP command. Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08Add migration capabilitiesOrit Wasserman1-0/+39
The management can query the current migration capabilities using query-migrate-capabilities QMP command. The user can use 'info migrate_capabilities' HMP command. Currently only XBZRLE capability is available. Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-06qapi: generalize documentation of streaming commandsPaolo Bonzini1-9/+8
Talk about background operations in general, rather than specifically about streaming. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-03Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori1-3/+6
* qmp/queue/qmp: hmp: show the backing file depth block: Use bdrv_get_backing_file_depth() block: create bdrv_get_backing_file_depth() qapi: qapi.py: allow the "'" character to be escaped
2012-08-03block: Use bdrv_get_backing_file_depth()Benoît Canet1-3/+6
Use the dedicated counting function in qmp_query_block in order to propagate the backing file depth to HMP and add backing_file_depth to qmp-commands.hx Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-08-01net: Add a hub net clientStefan Hajnoczi1-8/+22
The vlan feature can be implemented in terms of hubs. By introducing a hub net client it becomes possible to remove the special case vlan code from net.c and push the vlan feature out of generic networking code. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-07-23qapi schema: add Netdev typesLaszlo Ersek1-0/+278
NetdevTapOptions::sndbuf and NetdevDumpOptions::len use the new "size" type. v1->v2: - NetLegacy::name is optional - NetLegacyNicOptions::vectors is of type uint32 - NetdevVdeOptions::port and ::mode are of type uint16 - NetLegacy::vlan has type int32 v2->v3: - NetLegacy::id is allowed and takes precedence over NetLegacy::name - replace "@traits" with "@opts" in NetLegacy & Netdev descriptions Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-23qapi schema: remove trailing whitespaceLaszlo Ersek1-5/+5
Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-13qapi: Convert getfd and closefdCorey Bryant1-0/+35
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-07-13qmp: dump-guest-memory: improve schema docLuiz Capitulino1-15/+17
Clarify a few points and makes it looks more like the other commands' documentation. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-29Add spent time for migrationJuan Quintela1-3/+9
We add time spent for migration to the output of "info migrate" command. 'total_time' means time since the start fo migration if migration is 'active', and total time of migration if migration is completed. As we are also interested in transferred ram when migration completes, adding all ram statistics Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-06-04Add 'query-events' command to QMP to query async eventsDaniel P. Berrange1-0/+22
Sometimes it is neccessary for an application to determine whether a particular QMP event is available, so they can decide whether to use compatibility code instead. This introduces a new 'query-events' command to QMP to do just that { "execute": "query-events" } {"return": [{"name": "WAKEUP"}, {"name": "SUSPEND"}, {"name": "DEVICE_TRAY_MOVED"}, {"name": "BLOCK_JOB_CANCELLED"}, {"name": "BLOCK_JOB_COMPLETED"}, ...snip... {"name": "SHUTDOWN"}]} * monitor.c: Turn MonitorEvent -> string conversion into a lookup from a static table of constant strings. Add impl of qmp_query_events monitor command handler * qapi-schema.json, qmp-commands.hx: Define contract of query-events command Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-04qapi: convert netdev_delLuiz Capitulino1-0/+14
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-06-04qapi: convert netdev_addLuiz Capitulino1-0/+28
This is not a full QAPI conversion, but an intermediate step. In essence, do_netdev_add() is split into three functions: 1. netdev_add(): performs the actual work. This function is fully converted to Error (thus, it's "qapi-friendly") 2. qmp_netdev_add(): the QMP front-end for netdev_add(). This is coded by hand and not auto-generated (gen=no in the schema). The reason for this it's a lot easier and simpler to with QemuOpts this way 3. hmp_netdev_add(): HMP front-end. This design was suggested by Paolo Bonzini. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-06-04introduce a new monitor command 'dump-guest-memory' to dump guest's memoryWen Congyang1-0/+43
The command's usage: dump-guest-memory [-p] protocol [begin] [length] The supported protocol can be file or fd: 1. file: the protocol starts with "file:", and the following string is the file's path. 2. fd: the protocol starts with "fd:", and the following string is the fd's name. Note: 1. If you want to use gdb to process the core, please specify -p option. The reason why the -p option is not default is: a. guest machine in a catastrophic state can have corrupted memory, which we cannot trust. b. The guest machine can be in read-mode even if paging is enabled. For example: the guest machine uses ACPI to sleep, and ACPI sleep state goes in real-mode. 2. If you don't want to dump all guest's memory, please specify the start physical address and the length. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-05-08runstate: introduce suspended stateLuiz Capitulino1-1/+3
QEMU enters in this state when the guest suspends to ram (S3). This is important so that HMP users and QMP clients can know that the guest is suspended. QMP also has an event for this, but events are not reliable and are limited (ie. a client can connect to QEMU after the event has been emitted). Having a different state for S3 brings a new issue, though. Every device that doesn't run when the VM is stopped but wants to run when the VM is suspended has to check for RUN_STATE_SUSPENDED explicitly. This is the case for the keyboard and mouse devices, for example. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2012-05-08qapi-schema.json: fix RunState enums alphabetical orderLuiz Capitulino1-2/+2
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-05-03spice_info: add mouse_modeAlon Levy1-1/+26
Add mouse_mode, either server or mouse, to qmp and hmp commands, based on spice_server_is_server_mouse added in spice-server 0.10.3. Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-04-27block: add 'speed' optional parameter to block-streamStefan Hajnoczi1-2/+7
Allow streaming operations to be started with an initial speed limit. This eliminates the window of time between starting streaming and issuing block-job-set-speed. Users should use the new optional 'speed' parameter instead so that speed limits are in effect immediately when the job starts. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-04-27block: change block-job-set-speed argument from 'value' to 'speed'Stefan Hajnoczi1-2/+2
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-22 08:11:28 +0000