summaryrefslogtreecommitdiff
path: root/qemu-img-cmds.hx
AgeCommit message (Collapse)AuthorFilesLines
2014-11-03qemu-img: Add progress output for amendMax Reitz1-2/+2
Now that bdrv_amend_options() supports a status callback, use it to display a progress report. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1414404776-4919-3-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-03qemu-img: Specify backing file for commitMax Reitz1-2/+2
Introduce a new parameter for qemu-img commit which may be used to explicitly specify the backing file into which an image should be committed if the backing chain has more than a single layer. [Applied Eric Blake's qemu-img.texi documentation rewording --Stefan] Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1414159063-25977-12-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-03qemu-img: Enable progress output for commitMax Reitz1-2/+2
Implement progress output for the commit command by querying the progress of the block job. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1414159063-25977-11-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-03qemu-img: Empty image after commitMax Reitz1-2/+2
After the top image has been committed, it should be emptied unless specified otherwise. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1414159063-25977-10-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-22qemu-img: Allow cache mode specification for amendMax Reitz1-2/+2
qemu-img amend may extensively modify the target image, depending on the options to be amended (e.g. conversion to qcow2 compat level 0.10 from 1.1 for an image with many unallocated zero clusters). Therefore it makes sense to allow the user to specify the cache mode to be used. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-22qemu-img: Allow source cache mode specificationMax Reitz1-8/+8
Many qemu-img subcommands only read the source file(s) once. For these use cases, a full write-back cache is unnecessary and mainly clutters host cache memory. Though this is generally no concern as cache memory is freely available and can be scaled by the host OS, it may become a concern with thin provisioning. For these cases, it makes sense to allow users to freely specify the source cache mode (e.g. use no cache at all). This commit adds a new switch (-T) for the qemu-img subcommands check, compare, convert and rebase to specify the cache to be used for source images (the backing file in case of rebase). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-12-04qemu-img: add -l for snapshot in convertWenchao Xia1-2/+2
Now qemu-img convert have similar options as qemu-nbd for internal snapshot. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-12block: Image file option amendmentMax Reitz1-0/+6
This patch adds the "amend" option to qemu-img which allows changing image options on existing image files. It also adds the generic bdrv implementation which is basically just a wrapper for the image format specific function. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-06qemu-img: add a "map" subcommandPaolo Bonzini1-0/+6
This command dumps the metadata of an entire chain, in either tabular or JSON format. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06add qemu-img convert -n option (skip target volume creation)Alexandre Derumier1-2/+2
Add a -n option to skip volume creation on qemu-img convert. This is useful for targets such as rbd / ceph, where the target volume may already exist; we cannot always rely on qemu-img convert to create the image, as dependent on the output format, there may be parameters which are not possible to specify through the qemu-img convert command line. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Alexandre Derumier <aderumier@odiso.com> Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qemu-img: Add compare subcommandMiroslav Rezanina1-0/+6
This patch adds new qemu-img subcommand that compares content of two disk images. Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qemu-img: Add "Quiet mode" optionMiroslav Rezanina1-14/+14
There can be a need to turn output to stdout off. This patch adds a -q option that enable "Quiet mode". In Quiet mode, only errors are printed out. Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-22qemu-img: add json output option to the check commandFederico Simoncelli1-2/+2
This option --output=[human|json] makes qemu-img check output a human or JSON representation at the choice of the user. Signed-off-by: Federico Simoncelli <fsimonce@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24qemu-img: document 'info --backing-chain'Kashyap Chamarthy1-2/+2
Signed-off-by: Kashyap Chamarthy <kashyap.cv@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-12qemu-img: Add json output option to the info command.Benoît Canet1-2/+2
This option --output=[human|json] make qemu-img info output on human or JSON representation at the choice of the user. example: { "snapshots": [ { "vm-clock-nsec": 637102488, "name": "vm-20120821145509", "date-sec": 1345553709, "date-nsec": 220289000, "vm-clock-sec": 20, "id": "1", "vm-state-size": 96522745 }, { "vm-clock-nsec": 28210866, "name": "vm-20120821154059", "date-sec": 1345556459, "date-nsec": 171392000, "vm-clock-sec": 46, "id": "2", "vm-state-size": 101208714 } ], "virtual-size": 1073741824, "filename": "snap.qcow2", "cluster-size": 65536, "format": "qcow2", "actual-size": 985587712, "dirty-flag": false } Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-15qemu-img check -r for repairing imagesKevin Wolf1-2/+2
The QED block driver already provides the functionality to not only detect inconsistencies in images, but also fix them. However, this functionality cannot be manually invoked with qemu-img, but the check happens only automatically during bdrv_open(). This adds a -r switch to qemu-img check that allows manual invocation of an image repair. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-15Documentation: Add qemu-img -t parameter in man pageKevin Wolf1-3/+3
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-08-29qemu-img: Require larger zero areas for sparse handlingKevin Wolf1-2/+2
By default, require 4k of consecutive zero bytes for qemu-img to make the output file sparse by not issuing a write request for the zeroed parts. Add an -S option to allow users to tune this setting. This helps to avoid situations where a lot of zero sectors and data sectors are mixed and qemu-img tended to issue many tiny 512 byte writes. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-20Add missing documentation for qemu-img -pJes Sorensen1-2/+2
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-05qemu-img: Add cache command line optionFederico Simoncelli1-3/+3
qemu-img currently writes disk images using writeback and filling up the cache buffers which are then flushed by the kernel preventing other processes from accessing the storage. This is particularly bad in cluster environments where time-based algorithms might be in place and accessing the storage within certain timeouts is critical. This patch adds the option to choose a cache method when writing disk images. Signed-off-by: Federico Simoncelli <fsimonce@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-07qemu-img: Initial progress printing supportJes Sorensen1-2/+2
This adds the basic infrastructure for supporting progress output on the command line, as well as progress support for qemu-img commands 'rebase' and 'convert'. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-10-22Copy snapshots out of QCOW2 diskedison1-2/+2
In order to backup snapshots, created from QCOW2 iamge, we want to copy snapshots out of QCOW2 disk to a seperate storage. The following patch adds a new option in "qemu-img": qemu-img convert -f qcow2 -O qcow2 -s snapshot_name src_img bck_img. Right now, it only supports to copy the full snapshot, delta snapshot is on the way. Changes from V1: all the comments from Kevin are addressed: Add read-only checking Fix coding style Change the name from bdrv_snapshot_load to bdrv_snapshot_load_tmp Signed-off-by: Disheng Su <edison@cloud.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-13qemu-img: Fix copy+paste bug in documentationStefan Weil1-1/+1
Replace rebase by resize in documentation of resize command. Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-22Fix TEXI section mark imbalance in qemu-img-cmd.hxJan Kiszka1-1/+1
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-03qemu-img: Add 'resize' command to grow/shrink disk imagesStefan Hajnoczi1-0/+6
This patch adds a 'resize' command to grow/shrink disk images. This allows changing the size of disk images without copying to a new image file. Currently only raw files support resize. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-03-14qemu-img rebase: Document -f optionKevin Wolf1-2/+2
The option was implemented in e53dbee0, but I forgot documenting it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-01-13qemu-img rebaseKevin Wolf1-0/+6
This adds a rebase subcommand to qemu-img which allows to change the backing file of an image. In default mode, both the current and the new backing file need to exist, and after the rebase, the COW image is guaranteed to have the same guest visible content as before. To achieve this, old and new backing file are compared and, if necessary, data is copied from the old backing file into the COW image. With -u an unsafe mode is enabled that doesn't require the backing files to exist. It merely changes the backing file reference in the COW image. This is useful for renaming or moving the backing file. The user is responsible to make sure that the new backing file has no changes compared to the old one, or corruption may occur. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09Documentation: Don't mention old qemu-img optionsKevin Wolf1-4/+4
The old options are still supported for compatibility, but they are inconsistent (for example create -b vs. convert -B for backing files) and incomplete (-F only exists for create) which tends to confuse people. Remove all references to the old options from the documentation to guide users to the more consistent -o options. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-07Use hxtool for qemu-img command listStuart Brady1-0/+47
Use hxtool to generate the 'command syntax' section of qemu-img's help message, and the corresponding section of the texinfo documentation. This has the side-effect of adding 'check' to this list of commands in the texinfo documentation. Signed-off-by: Stuart Brady <stuart.brady@gmail.com>