summaryrefslogtreecommitdiff
path: root/qmp-commands.hx
AgeCommit message (Collapse)AuthorFilesLines
2014-02-28dump: add 'query-dump-guest-memory-capability' commandqiaonuohan1-0/+20
'query-dump-guest-memory-capability' is used to query the available formats for 'dump-guest-memory'. The output of the command will be like: -> { "execute": "query-dump-guest-memory-capability" } <- { "return": { "formats": ["elf", "kdump-zlib", "kdump-lzo", "kdump-snappy"] } Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-28dump: make kdump-compressed format available for 'dump-guest-memory'qiaonuohan1-2/+5
Make monitor command 'dump-guest-memory' be able to dump in kdump-compressed format. The command's usage: dump [-p] protocol [begin] [length] [format] 'format' is used to specified the format of vmcore and can be: 1. 'elf': ELF format, without compression 2. 'kdump-zlib': kdump-compressed format, with zlib-compressed 3. 'kdump-lzo': kdump-compressed format, with lzo-compressed 4. 'kdump-snappy': kdump-compressed format, with snappy-compressed Without 'format' being set, it is same as 'elf'. And if non-elf format is specified, paging and filter is not allowed. Note: 1. The kdump-compressed format is readable only with the crash utility and makedumpfile, and it can be smaller than the ELF format because of the compression support. 2. The kdump-compressed format is the 6th edition. Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-17qmp: expose list of supported character device backendsMartin Kletzander1-0/+41
Introduce 'query-chardev-backends' QMP command which lists all supported character device backends. Signed-off-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-24block: update block commit documentation regarding image truncationJeff Cody1-0/+39
This updates the documentation for commiting snapshot images. Specifically, this highlights what happens when the base image is either smaller or larger than the snapshot image being committed. In the case of the base image being smaller, it is resized to the larger size of the snapshot image. In the case of the base image being larger, it is not resized automatically, but once the commit has completed it is safe for the user to truncate the base image. Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24qmp: Allow to take external snapshots on bs graphs node.Benoît Canet1-1/+10
Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24qmp: Allow block_resize to manipulate bs graph nodes.Benoît Canet1-1/+2
Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24qmp: Allow to change password on named block driver states.Benoît Canet1-1/+2
Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Fam Zheng <famz@redhat.com> There was two candidate ways to implement named node manipulation: 1) { 'command': 'block_passwd', 'data': {'*device': 'str', '*node-name': 'str', 'password': 'str'} } 2) { 'command': 'block_passwd', 'data': {'device': 'str', '*device-is-node': 'bool', 'password': 'str'} } Luiz proposed 1 and says 2 was an abuse of the QMP interface and proposed to rewrite the QMP block interface for 2.0. Luiz does not like in 1 the fact that 2 fields are optional but one of them must be specified leading to an abuse of the QMP semantic. Kevin argumented that 2 what a clear abuse of the device field and would not be practical when reading fast some log file because the user would read "device" and think that a device is manipulated when it's in fact a node name. Documentation of 1 make it pretty clear what to do for the user. Kevin argued that all bs are node including devices ones so 2 does not make sense. Kevin also argued that rewriting the QMP block interface would not make disapear the current one. Kevin pushed the argument that making the QAPI generator compatible with the semantic of the operation would need a rewrite that no one has done yet. A vote has been done on the list to elect the version to use and 1 won. For reference the complete thread is: "[Qemu-devel] [PATCH V4 4/7] qmp: Allow to change password on names block driver states." Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24qmp: Add QMP query-named-block-nodes to list the named BlockDriverState nodes.Benoît Canet1-0/+61
Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-06monitor: add object-add (QMP) and object_add (HMP) commandPaolo Bonzini1-0/+26
Add two commands that are the monitor counterparts of -object. The commands have the same Visitor-based implementation, but use different kinds of visitors so that the HMP command has a DWIM string-based syntax, while the QMP variant accepts a stricter JSON-based properties dictionary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06monitor: add object-del (QMP) and object_del (HMP) commandPaolo Bonzini1-0/+25
These two commands invoke the "unparent" method of Object. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-10-11blockdev: 'blockdev-add' QMP commandKevin Wolf1-0/+55
For examples see the changes to qmp-commands.hx. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12qmp: add interface blockdev-snapshot-delete-internal-syncWenchao Xia1-0/+41
This interface use id and name as optional parameters, to handle the case that one image contain multiple snapshots with same name which may be '', but with different id. Adding parameter id is for historical compatiability reason, and that case is not possible in qemu's new interface for internal snapshot at block device level, but still possible in qemu-img. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12qmp: add interface blockdev-snapshot-internal-syncWenchao Xia1-0/+29
Snapshot ID can't be specified in this interface. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12qmp: add internal snapshot support in qmp_transactionWenchao Xia1-8/+26
Unlike savevm, the qmp_transaction interface will not generate snapshot name automatically, saving trouble to return information of the new created snapshot. Although qcow2 support storing multiple snapshots with same name but different ID, here it will fail when an snapshot with that name already exist before the operation. Format such as rbd do not support ID at all, and in most case, it means trouble to user when he faces multiple snapshots with same name, so ban that case. Request with empty name will be rejected. Snapshot ID can't be specified in this interface. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-06block: Add iops_size to do the iops accounting for a given io size.Benoît Canet1-2/+6
This feature can be used in case where users are avoiding the iops limit by doing jumbo I/Os hammering the storage backend. Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06block: Add support for throttling burst max in QMP and the command line.Benoît Canet1-2/+26
The max parameter of the leaky bucket throttling algorithm can be used to allow the guest to do bursts. The max value is a pool of I/O that the guest can use without being throttled at all. Throttling is triggered once this pool is empty. Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-01qmp: fix integer usage in examplesEric Blake1-13/+13
Per the qapi schema, block_set_io_throttle takes most arguments as ints, not strings. * qmp-commands.hx (block_set_io_throttle): Use correct type. Fix whitespace and a copy-paste bug in the process. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-08-30s390: wire up nmi command to raise a RESTART interrupt on S390Eugene (jno) Dvurechenski1-1/+1
There is the 'nmi' command that is used to trigger a guest dump via kdump feature on x86. s390 uses RESTART interrupt to trigger kdump. So, this patch provides a mean to use 'nmi' command on s390 to raise RESTART interrupt. The CPU to receive the RESTART interrupt is the "default" one. There is an infrastructure to select the "default" CPU using 'cpu' command. The 'info cpus' command can be used to see which one is the "default". In order to wire up the RESTART to 'nmi' command we had to: 1. implement the kvm_s390_cpu_restart function by exporting the existing code 2. implement s390_cpu_restart function as kvm-aware wrapper 3. modify the qmp_inject_nmi function to enable (for s390) the scan for "default" CPU and call s390_cpu_restart for it; 3. fix some messages. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Alexander Graf <agraf@suse.de>
2013-08-12rdma: remaining documentation fixesMichael R. Hines1-0/+10
Was missing 'setup-time' in some of the QMP documentation... Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1376078746-24948-7-git-send-email-mrhines@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-26Implement sync modes for drive-backup.Ian Main1-0/+1
This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: Ian Main <imain@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-18Merge remote-tracking branch 'luiz/queue/qmp' into stagingAnthony Liguori1-2/+5
# By Amos Kong (1) and Luiz Capitulino (1) # Via Luiz Capitulino * luiz/queue/qmp: qmp: update send-key document qapi: qapi-commands: fix possible leaks on visitor dealloc Message-id: 1374093679-29213-1-git-send-email-lcapitulino@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-18Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori1-0/+63
pci,net,pc enhancements This includes some fixes and enhancements that accumulated in my tree: pci fixes by dkoch, virtio-net enhancements by akong and mst, and a fix for xen pc by mst. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 17 Jul 2013 04:44:45 AM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Don Koch (2) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: pc: don't access fw cfg if NULL virtio-net: add feature bit for any header s/g net: add support of mac-programming over macvtap in QEMU side pci: fix BRDIGE typo pci-bridge: update mappings for migration/restore Message-id: 1374054430-21966-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-17qmp: update send-key documentAmos Kong1-2/+5
commit 9f328977 changes qmp_send_key() to accept key codes in hex, but the document wasn't updated. The items of keys list is union now, not enum. Signed-off-by: Amos Kong <akong@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-07-15net: add support of mac-programming over macvtap in QEMU sideAmos Kong1-0/+63
Currently macvtap based macvlan device is working in promiscuous mode, we want to implement mac-programming over macvtap through Libvirt for better performance. Design: QEMU notifies Libvirt when rx-filter config is changed in guest, then Libvirt query the rx-filter information by a monitor command, and sync the change to macvtap device. Related rx-filter config of the nic contains main mac, rx-mode items and vlan table. This patch adds a QMP event to notify management of rx-filter change, and adds a monitor command for management to query rx-filter information. Test: If we repeatedly add/remove vlan, and change macaddr of vlan interfaces in guest by a loop script. Result: The events will flood the QMP client(management), management takes too much resource to process the events. Event_throttle API (set rate to 1 ms) can avoid the events to flood QMP client, but it could cause an unexpected delay (~1ms), guests guests normally expect rx-filter updates immediately. So we use a flag for each nic to avoid events flooding, the event is emitted once until the query command is executed. The flag implementation could not introduce unexpected delay. There maybe exist an uncontrollable delay if we let Libvirt do the real change, guests normally expect rx-filter updates immediately. But it's another separate issue, we can investigate it when the work in Libvirt side is done. Michael S. Tsirkin: tweaked to enable events on start Michael S. Tsirkin: fixed not to crash when no id Michael S. Tsirkin: fold in patch: "additional fixes for mac-programming feature" Amos Kong: always notify QMP client if mactable is changed Amos Kong: return NULL list if no net client supports rx-filter query Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-15blockdev: add sync mode to drive-backup QMP commandStefan Hajnoczi1-1/+5
The drive-backup command is similar to the drive-mirror command, except no guest data written after the command executes gets copied. Add a sync mode argument which determines whether the entire disk is copied, just allocated clusters, or only clusters being written to by the guest. Currently only sync mode 'full' is supported - it copies the entire disk. For read-only point-in-time snapshots we may only need sync mode 'none' since the target can be a qcow2 file using the guest's disk as its backing file (no need to copy the entire disk). Finally, sync mode 'top' is useful if we wish to preserve the backing chain. Note that this patch just adds the sync mode argument to drive-backup. It does not implement sync modes 'top' or 'none'. This patch is necessary so we can add a drive-backup HMP command that behaves like the existing drive-mirror HMP command and takes a sync mode. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-28block: add drive-backup QMP commandStefan Hajnoczi1-0/+46
@drive-backup Start a point-in-time copy of a block device to a new destination. The status of ongoing drive-backup operations can be checked with query-block-jobs where the BlockJobInfo.type field has the value 'backup'. The operation can be stopped before it has completed using the block-job-cancel command. @device: the name of the device which should be copied. @target: the target of the new image. If the file exists, or if it is a device, the existing file/device will be used as the new destination. If it does not exist, a new file will be created. @format: #optional the format of the new destination, default is to probe if @mode is 'existing', else the format of the source @mode: #optional whether and how QEMU should create a new image, default is 'absolute-paths'. @speed: #optional the maximum speed, in bytes per second @on-source-error: #optional the action to take on an error on the source, default 'report'. 'stop' and 'enospc' can only be used if the block device supports io-status (see BlockInfo). @on-target-error: #optional the action to take on an error on the target, default 'report' (no limitations, since this applies to a different block device than @device). Note that @on-source-error and @on-target-error only affect background I/O. If an error occurs during a guest write request, the device's rerror/werror actions will be used. Returns: nothing on success If @device is not a valid block device, DeviceNotFound Since 1.6 Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-07qmp: add ImageInfo in BlockDeviceInfo used by query-blockWenchao Xia1-2/+67
Now image info will be retrieved as an embbed json object inside BlockDeviceInfo, backing chain info and all related internal snapshot info can be got in the enhanced recursive structure of ImageInfo. New recursive member *backing-image is added to reflect the backing chain status. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-05-02Merge remote-tracking branch 'afaerber/qom-cpu' into stagingAnthony Liguori1-0/+23
# By Igor Mammedov (21) and others # Via Andreas Färber * afaerber/qom-cpu: (29 commits) Drop redundant resume_all_vcpus() from main() cpus: Fix pausing TCG CPUs while in vCPU thread target-i386: Replace cpuid_*features fields with a feature word array target-i386: Break CPUID feature definition lines target-i386/kvm.c: Code formatting changes target-i386: Group together level, xlevel, xlevel2 fields pc: Implement QEMUMachine::hot_add_cpu hook QMP: Add cpu-add command Add hot_add_cpu hook to QEMUMachine target-i386: Move APIC to ICC bus target-i386: Attach ICC bus to CPU on its creation target-i386: Introduce ICC bus/device/bridge cpu: Move cpu_write_elfXX_note() functions to CPUState kvmvapic: Make dependency on sysbus.h explicit target-i386: Replace MSI_SPACE_SIZE with APIC_SPACE_SIZE target-i386: Do not allow to set apic-id once CPU is realized target-i386: Introduce apic-id CPU property target-i386: Introduce feat2prop() for CPU properties acpi_piix4: Add infrastructure to send CPU hot-plug GPE to guest cpu: Add helper cpu_exists(), to check if CPU with specified id exists ...
2013-05-01Trivial grammar and spelling fixesStefan Weil1-1/+1
similiar -> similar recieve -> receive transfered -> transferred preperation -> preparation Most changes are in comments, one modifies a parameter name in a function prototype. The spelling fixes were made using codespell. Signed-off-by: Stefan Weil <sw@weilnetz.de> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-01QMP: Add cpu-add commandIgor Mammedov1-0/+23
Adds "cpu-add id=xxx" QMP command. cpu-add's "id" argument is a CPU number in a range [0..max-cpus) Example QMP command: -> { "execute": "cpu-add", "arguments": { "id": 2 } } <- { "return": {} } Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-04-25monitor: introduce query-command-line-optionsAmos Kong1-0/+47
Libvirt has no way to probe if an option or property is supported, This patch introduces a new qmp command to query command line option information. hmp command isn't added because it's not needed. Signed-off-by: Amos Kong <akong@redhat.com> CC: Luiz Capitulino <lcapitulino@redhat.com> CC: Osier Yang <jyang@redhat.com> CC: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-04-12Revert "New QMP command query-cpu-max and HMP command cpu_max"Michal Novotny1-22/+0
This reverts commit 4d700430a20b3d53b7b15bc5f6666f7e570e3f2c as asked by Luiz. The patch has been obsoleted by extending MachineInfo structure by cpu-max field. Signed-off-by: Michal Novotny <minovotn@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-26Merge remote-tracking branch 'quintela/migration.next' into stagingAnthony Liguori1-22/+33
# By Peter Lieven (9) and others # Via Juan Quintela * quintela/migration.next: (22 commits) Use qemu_put_buffer_async for guest memory pages Add qemu_put_buffer_async Use writev ops if available Store the data to send also in iovec Update bytes_xfer in qemu_put_byte Add socket_writev_buffer function Add QemuFileWritevBuffer QemuFileOps migration: use XBZRLE only after bulk stage migration: do not search dirty pages in bulk stage migration: do not sent zero pages in bulk stage migration: add an indicator for bulk state of ram migration migration: search for zero instead of dup pages bitops: unroll while loop in find_next_bit() buffer_is_zero: use vector optimizations if possible cutils: add a function to find non-zero content in a buffer move vector definitions to qemu-common.h savevm: Fix bugs in the VMSTATE_VBUFFER_MULTIPLY definition savevm: Add VMSTATE_STRUCT_VARRAY_POINTER_UINT32 savevm: Add VMSTATE_FLOAT64 helpers savevm: Add VMSTATE_UINTTL_EQUAL helper ...
2013-03-26migration: do not sent zero pages in bulk stagePeter Lieven1-0/+1
during bulk stage of ram migration if a page is a zero page do not send it at all. the memory at the destination reads as zero anyway. even if there is an madvise with QEMU_MADV_DONTNEED at the target upon receipt of a zero page I have observed that the target starts swapping if the memory is overcommitted. it seems that the pages are dropped asynchronously. this patch also updates QMP to return the number of skipped pages in MigrationStats. Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-26migration: Improve QMP documentationJuan Quintela1-22/+32
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-03-25New QMP command query-cpu-max and HMP command cpu_maxMichal Novotny1-0/+22
These commands return the maximum number of CPUs supported by the currently running emulator instance, as defined in its QEMUMachine struct. Signed-off-by: Michal Novotny <minovotn@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-25QMP: TPM QMP and man page documentation updatesCorey Bryant1-0/+58
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-12Support for TPM command line optionsStefan Berger1-0/+18
This patch adds support for TPM command line options. The command line options supported here are ./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id> -device tpm-tis,tpmdev=<id>,id=<other id> and ./qemu-... -tpmdev help where the latter works similar to -soundhw help and shows a list of available TPM backends (for example 'passthrough'). Using the type parameter, the backend is chosen, i.e., 'passthrough' for the passthrough driver. The interpretation of the other parameters along with determining whether enough parameters were provided is pushed into the backend driver, which needs to implement the interface function 'create' and return a TPMDriverOpts structure if the VM can be started or 'NULL' if not enough or bad parameters were provided. Monitor support for 'info tpm' has been added. It for example prints the following: (qemu) info tpm TPM devices: tpm0: model=tpm-tis \ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com> Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-27qmp: netdev_add is like -netdev, not -net, fix documentationMarkus Armbruster1-1/+1
Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-06qemu-char: Saner naming of memchar stuff & doc fixesMarkus Armbruster1-26/+29
New device, has never been released, so we can still improve things without worrying about compatibility. Naming is a mess. The code calls the device driver CirMemCharDriver, the public API calls it "memory", "memchardev", or "memchar", and the special commands are named like "memchar-FOO". "memory" is a particularly unfortunate choice, because there's another character device driver called MemoryDriver. Moreover, the device's distinctive property is that it's a ring buffer, not that's in memory. Therefore: * Rename CirMemCharDriver to RingBufCharDriver, and call the thing a "ringbuf" in the API. * Rename QMP and HMP commands from memchar-FOO to ringbuf-FOO. * Rename device parameter from maxcapacity to size (simple words are good for you). * Clearly mark the parameter as optional in documentation. * Fix error reporting so that chardev-add reports to current monitor, not stderr. * Replace cirmem in C identifiers by ringbuf. * Rework documentation. Document the impact of our crappy UTF-8 handling on reading. * QMP examples that even work. I could split this up into multiple commits, but they'd change the same documentation lines multiple times. Not worth it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06qmp: Clean up design of memchar-readMarkus Armbruster1-1/+1
The data returned has a well-defined size, which makes the size returned along with it redundant at best. Drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06qmp: Fix design bug and read beyond buffer in memchar-writeMarkus Armbruster1-3/+1
Command memchar-write takes data and size parameter. Begs the question what happens when data doesn't match size. With format base64, qmp_memchar_write() copies the full data argument, regardless of size argument. With format utf8, qmp_memchar_write() copies size bytes from data, happily reading beyond data. Copies crap from the heap or even crashes. Drop the size parameter, and always copy the full data argument. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01Fix example for query-migrate-capabilitiesOrit Wasserman1-4/+2
Signed-off-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-01-30qmp-commands.hx: s/tray-open/tray_open/ to match qapi schemaMichal Privoznik1-1/+1
Currently, we are using 'tray_open' in QMP and 'tray-open' in HMP. However, the QMP documentation was mistakenly using the HMP version. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-28Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori1-1/+9
# By Paolo Bonzini (14) and others # Via Kevin Wolf * kwolf/for-anthony: (24 commits) ide: Add fall through annotations block: Create proper size file for disk mirror ahci: Add migration support ahci: Change data types in preparation for migration ahci: Remove unused AHCIDevice fields hbitmap: add assertion on hbitmap_iter_init mirror: do nothing on zero-sized disk block/vdi: Check for bad signature block/vdi: Improved return values from vdi_open block/vdi: Improve debug output for signature block: Use error code EMEDIUMTYPE for wrong format in some block drivers block: Add special error code for wrong format mirror: support arbitrarily-sized iterations mirror: support more than one in-flight AIO operation mirror: add buf-size argument to drive-mirror mirror: switch mirror_iteration to AIO mirror: allow customizing the granularity block: allow customizing the granularity of the dirty bitmap block: return count of dirty sectors, not chunks mirror: perform COW if the cluster size is bigger than the granularity ...
2013-01-25mirror: add buf-size argument to drive-mirrorPaolo Bonzini1-1/+3
This makes sense when the next commit starts using the extra buffer space to perform many I/O operations asynchronously. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25mirror: allow customizing the granularityPaolo Bonzini1-1/+7
The desired granularity may be very different depending on the kind of operation (e.g. continuous replication vs. collapse-to-raw) and whether the VM is expected to perform lots of I/O while mirroring is in progress. Allow the user to customize it, while providing a sane default so that in general there will be no extra allocated space in the target compared to the source. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25QAPI: Introduce memchar-read QMP commandLei Li1-0/+33
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-25QAPI: Introduce memchar-write QMP commandLei Li1-0/+33
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-25balloon: drop old stats code & APILuiz Capitulino1-13/+0
Next commit will re-enable balloon stats with a different interface, but this old code conflicts with it. Let's drop it. It's important to note that the QMP and HMP interfaces are also dropped by this commit. That shouldn't be a problem though, because: 1. All QMP fields are optional 2. This feature has always been disabled Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>