summaryrefslogtreecommitdiff
path: root/qmp-commands.hx
AgeCommit message (Collapse)AuthorFilesLines
2015-06-12qmp/hmp: add rocker device supportScott Feldman1-0/+103
Add QMP/HMP support for rocker devices. This is mostly for debugging purposes to see inside the device's tables and port configurations. Some examples: (qemu) info rocker sw1 name: sw1 id: 0x0000013512005452 ports: 4 (qemu) info rocker-ports sw1 ena/ speed/ auto port link duplex neg? sw1.1 up 10G FD No sw1.2 up 10G FD No sw1.3 !ena 10G FD No sw1.4 !ena 10G FD No (qemu) info rocker-of-dpa-flows sw1 prio tbl hits key(mask) --> actions 2 60 pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e 2 60 pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58 3 50 vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58 3 50 1 vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60 2 60 pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 3 50 2 vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60 2 60 1 pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1 3 50 2 vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60 2 60 1 pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58 3 50 vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60 2 60 pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58 3 50 1 vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60 1 60 173 pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000 1 60 6 pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000 1 60 174 pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000 1 60 174 pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000 1 60 6 pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000 1 60 181 pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000 1 10 715 pport 2 --> apply new vlan 2 goto tbl 20 1 60 177 pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000 1 60 174 pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000 1 10 717 pport 1 --> apply new vlan 1 goto tbl 20 1 0 1432 pport 0(0xffff) --> goto tbl 10 (qemu) info rocker-of-dpa-groups sw1 id (decode) --> buckets 0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000] 0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1 0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2 0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0 0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0 0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000] [Added "query-" prefixes to rocker.json commands as suggested by Eric Blake <eblake@redhat.com>. --Stefan] Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-02monitor: Convert client_migrate_info to QAPIMarkus Armbruster1-1/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02monitor: Improve and document client_migrate_info protocol errorMarkus Armbruster1-7/+7
Protocol must be spice, vnc isn't implemented. Fix up documentation. Attempts to use vnc or any other unknown protocol yield the misleading error message "Invalid parameter 'protocol'". Improve it to "Parameter 'protocol' expects spice". Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by. Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-05-14qmp: Add qom_path field to query-cpus commandEduardo Habkost1-2/+5
This will allow clients to query additional information directly using qom-get on the CPU objects. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-05-07migration: Add qmp commands to set and query parametersLiang Li1-0/+57
Add the qmp commands to tune and query the parameters used in live migration. Signed-off-by: Liang Li <liang.z.li@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@intel.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-04-30qmp-commands: Fix typoJohn Snow1-2/+2
Just a trivial patch to correct a QMP example in qmp-commands.hx. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-28qmp: add block-dirty-bitmap-clearJohn Snow1-0/+29
Add bdrv_clear_dirty_bitmap and a matching QMP command, qmp_block_dirty_bitmap_clear that enables a user to reset the bitmap attached to a drive. This allows us to reset a bitmap in the event of a full drive backup. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1429314609-29776-12-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28qmp: Add support of "dirty-bitmap" sync mode for drive-backupJohn Snow1-3/+5
For "dirty-bitmap" sync mode, the block job will iterate through the given dirty bitmap to decide if a sector needs backup (backup all the dirty clusters and skip clean ones), just as allocation conditions of "top" sync mode. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1429314609-29776-11-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28qmp: Add block-dirty-bitmap-add and block-dirty-bitmap-removeJohn Snow1-0/+56
The new command pair is added to manage a user created dirty bitmap. The dirty bitmap's name is mandatory and must be unique for the same device, but different devices can have bitmaps with the same names. The granularity is an optional field. If it is not specified, we will choose a default granularity based on the cluster size if available, clamped to between 4K and 64K to mirror how the 'mirror' code was already choosing granularity. If we do not have cluster size info available, we choose 64K. This code has been factored out into a helper shared with block/mirror. This patch also introduces the 'block_dirty_bitmap_lookup' helper, which takes a device name and a dirty bitmap name and validates the lookup, returning NULL and setting errp if there is a problem with either field. This helper will be re-used in future patches in this series. The types added to block-core.json will be re-used in future patches in this series, see: 'qapi: Add transaction support to block-dirty-bitmap-{add, enable, disable}' Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1429314609-29776-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28block: document block-stream in qmp-commands.hxStefan Hajnoczi1-0/+37
The 'block-stream' QMP command is documented in block-core.json but not qmp-commands.hx. Add a summary of the command to qmp-commands.hx (similar to the documentation for 'block-commit'). Reported-by: Kashyap Chamarthy <kchamart@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-id: 1429094622-26218-1-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-27Merge remote-tracking branch 'remotes/spice/tags/pull-spice-20150427-1' into ↵Peter Maydell1-2/+1
staging spice: misc fixes. # gpg: Signature made Mon Apr 27 12:03:16 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/spice/tags/pull-spice-20150427-1: spice: learn to hide cursor spice: set pointer position on hotspot spice: fix mouse cursor position spice: fix simple display on bigendian hosts monitor: Make client_migrate_info synchronous Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-27monitor: Make client_migrate_info synchronousMarkus Armbruster1-2/+1
Live migration with spice works like this today: (1) client_migrate_info monitor cmd (2) spice server notifies client, client connects to target host. (3) qemu waits until spice client connect is finished. (4) send over vmstate (i.e. main part of live migration). (5) spice handover to target host. (3) is implemented by making client_migrate_info a async monitor command. This is the only async monitor command we have. The original reason to implement this dance was that qemu did not accept new tcp connections while the incoming migration was running, so (2) and (4) could not be done in parallel. That issue was fixed long ago though. Qemu version 1.3.0 (released Dec 2012) and newer happily accept tcp connects while the incoming migration runs. Time to drop step (3). This patch does exactly that, by making the monitor command synchronous and removing the code needed to handle the async monitor command in ui/spice-core.c Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-04-24qmp-commands: fix incorrect uses of ":O" specifierPaolo Bonzini1-2/+2
As far as the QMP parser is concerned, neither the 'O' nor the 'q' format specifiers put any constraint on the command. However, there are two differences: 1) from a documentation point of view 'O' says that this command takes a dictionary. The dictionary will be converted to QemuOpts in the handler to match the corresponding HMP command. 2) 'O' sets QMP_ACCEPT_UNKNOWNS, resulting in the command accepting invalid extra arguments. For example the following is accepted: { "execute": "send-key", "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" }, { "type": "qcode", "data": "alt" }, { "type": "qcode", "data": "delete" } ], "foo": "bar" } } Neither send-key nor migrate-set-capabilities take a QemuOpts-like dictionary; they take an array of dictionaries. And neither command really wants to have extra unknown arguments. Thus, the right specifier to use in this case is 'q'; with this patch the above command fails with {"error": {"class": "GenericError", "desc": "Invalid parameter 'foo'"}} as intended. Reported-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-27block: Document blockdev-add's immaturityMarkus Armbruster1-0/+4
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1426858337-21423-1-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-19Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell1-1/+1
Block patches for 2.3.0-rc1 # gpg: Signature made Thu Mar 19 15:03:26 2015 GMT using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: block: Fix blockdev-backup not to use funky error class raw-posix: Deprecate aio=threads fallback without O_DIRECT raw-posix: Deprecate host floppy passthrough Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-19raw-posix: Deprecate host floppy passthroughMarkus Armbruster1-1/+1
Raise your hand if you have a physical floppy drive in a computer you've powered on in 2015. Okay, I see we got a few weirdos in the audience. That's okay, weirdos are welcome here. Kidding aside, media change detection doesn't fully work, isn't going to be fixed, and floppy passthrough just isn't earning its keep anymore. Deprecate block driver host_floppy now, so we can drop it after a grace period. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-19qmp: Drop unused .user_print from command definitionsMarkus Armbruster1-4/+0
.user_print isn't used with QMP commands, only with HMP commands. Copied over when QMP got its own command table in commit 82a56f0. Most of them have been dropped since, but a few stragglers remain. Drop them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-16Add migrate_incomingDr. David Alan Gilbert1-1/+30
Add migrate_incoming/migrate-incoming to start an incoming migration. Once a qemu has been started with -incoming defer the migration can be started by issuing: migrate_incoming uri Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-10qmp-commands.hx: Fix several typosAlberto Garcia1-3/+3
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-06block: add event when disk usage exceeds thresholdFrancesco Romani1-0/+32
Managing applications, like oVirt (http://www.ovirt.org), make extensive use of thin-provisioned disk images. To let the guest run smoothly and be not unnecessarily paused, oVirt sets a disk usage threshold (so called 'high water mark') based on the occupation of the device, and automatically extends the image once the threshold is reached or exceeded. In order to detect the crossing of the threshold, oVirt has no choice but aggressively polling the QEMU monitor using the query-blockstats command. This lead to unnecessary system load, and is made even worse under scale: deployments with hundreds of VMs are no longer rare. To fix this, this patch adds: * A new monitor command `block-set-write-threshold', to set a mark for a given block device. * A new event `BLOCK_WRITE_THRESHOLD', to report if a block device usage exceeds the threshold. * A new `write_threshold' field into the `BlockDeviceInfo' structure, to report the configured threshold. This will allow the managing application to use smarter and more efficient monitoring, greatly reducing the need of polling. [Updated qemu-iotests 067 output to add the new 'write_threshold' property. --Stefan] [Changed g_assert_false() to !g_assert() to fix the build on older glib versions. --Kevin] Signed-off-by: Francesco Romani <fromani@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1421068273-692-1-git-send-email-fromani@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06block: add accounting for merged requestsPeter Lieven1-4/+18
Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-01-22monitor: add query-vnc-servers commandGerd Hoffmann1-0/+5
Add new query vnc qmp command, for the lack of better ideas just name it "query-vnc-servers". Changes over query-vnc: * It returns a list of vnc servers, so multiple vnc server instances are covered. * Each vnc server returns a list of server sockets. Followup patch will use that to also report websockets. In case we add support for multiple server sockets server sockets (to better support ipv4+ipv6 dualstack) we can add them to the list too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-01-13qmp: Add command 'blockdev-backup'Fam Zheng1-0/+42
Similar to drive-backup, but this command uses a device id as target instead of creating/opening an image file. Also add blocker on target bs, since the target is also a named device now. Add check and report error for bs == target which became possible but is an illegal case with introduction of blockdev-backup. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1418899027-8445-3-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2014-12-16qmp-command.hx: add missing docs for migration capabiliteszhanghailiang1-0/+6
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2014-12-11Merge remote-tracking branch ↵Peter Maydell1-2/+2
'remotes/mjt/tags/pull-trivial-patches-2014-12-11' into staging trivial patches for 2014-12-11 # gpg: Signature made Thu 11 Dec 2014 18:13:58 GMT using RSA key ID A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" * remotes/mjt/tags/pull-trivial-patches-2014-12-11: Sort include/qemu/typedefs.h hpet: increase spelling precision pflash_cfi02.c: associate "cfi.pflash02" to "Storage devices" category vt82c686: fix coverity warning about out-of-bounds write virtio: remove useless declaration of virtio_net_init() qapi-schema: fix typo about change-vnc-password fw_cfg: remove superfluous blank line get_maintainer.pl: Remove the --git-chief-penguins option configure: Replace which(1) with "has" util: Use g_new() & friends where that makes obvious sense util: Fuse g_malloc(); memset() into g_new0() util: Drop superfluous conditionals around g_free() Drop superfluous conditionals around g_strdup() Drop superfluous conditionals around qemu_opts_del() usb: delete redundant brackets in usb_host_handle_control() virtio-bus: avoid breaking build when open DEBUG switch acpi-build: Make DPRINTF working for acpi-build acpi-build: adjust indention 8 -> 4 spaces target-s390x: fix possible out of bounds read qmp: fix typo in input-send-event examples Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-10qmp: Add optional switch "query-nodes" in query-blockstatsFam Zheng1-1/+1
This bool option will allow query all the node names. It iterates all the BDSes that are assigned a name, also in this case don't query up the backing chain. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10qmp: fix typo in input-send-event examplesAmos Kong1-2/+2
Lack of two closed bracket in json commands. Signed-off-by: Amos Kong <akong@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-11-25input: move input-send-event into experimental namespaceGerd Hoffmann1-7/+9
Ongoing discussions on how we are going to specify the console, so tag the command as experiental so we can refine things in the 2.3 development cycle. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1416923657-10614-1-git-send-email-armbru@redhat.com [Spell out "not a stable API", and x- the QAPI schema, too] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Amos Kong <akong@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-13QMP/input-send-event: make console parameter optionalAmos Kong1-2/+2
The 'QemuConsole' is the input source for handler, we share some input handlers to process the input events from different QemuConsole. Normally we only have one set of keyboard, mouse, usbtablet, etc. The devices have different mask, it's fine to just checking mask to insure that the handler has the ability to process the event. I saw we try to bind console to handler in usb/dev-hid.c, but display always isn't available at that time. If we have multiseat setup (as Gerd said), we only have 'problem' in this case. Actually event from different devices have the same effect for system, it's fine to always use the first available handler without caring about the console. For send-key command, we just pass a NULL for console parameter in calling qemu_input_event_send_key(NULL, ..), but 'input-send-event' needs to care more devices. Conclusion: Generally assigning the special console is meanless, and we can't directly remove the QMP parameter for compatibility. So we can make the parameter optional. The parameter might be useful for some special condition: we have multiple devices without binding console and they all have the ability(mask) to process events, and we don't want to use the first one. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-02add input-send-event commandMarcelo Tosatti1-0/+63
Which allows specification of absolute/relative, up/down and console parameters. Suggested by Gerd Hoffman. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-26trace: [qmp] Add commands to query and control event tracing stateLluís Vilanova1-0/+35
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 20140825111957.31112.31733.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22block: delete cow block driverStefan Hajnoczi1-1/+1
This patch removes support for the cow file format. Normally we do not break backwards compatibility but in this case there is no impact and it is the most logical option. Extraordinary claims require extraordinary evidence so I will show why removing the cow block driver is the right thing to do. The cow file format is the disk image format for Usermode Linux, a way of running a Linux system in userspace. The performance of UML was never great and it was hacky, but it enjoyed some popularity before hardware virtualization support became mainstream. QEMU's block/cow.c is supposed to read this image file format. Unfortunately the file format was underspecified: 1. Earlier Linux versions used the MAXPATHLEN constant for the backing filename field. The value of MAXPATHLEN can change, so Linux switched to a 4096 literal but QEMU has a 1024 literal. 2. Padding was not used on the header struct (both in the Linux kernel and in QEMU) so the struct layout varied across architectures. In particular, i386 and x86_64 were different due to int64_t alignment differences. Linux now uses __attribute__((packed)), QEMU does not. Therefore: 1. QEMU cow images do not conform to the Linux cow image file format. 2. cow images cannot be shared between different host architectures. This means QEMU cow images are useless and QEMU has not had bug reports from users actually hitting these issues. Let's get rid of this thing, it serves no purpose and no one will be affected. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1410877464-20481-1-git-send-email-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-25cpus: Define callback for QEMU "nmi" commandAlexey Kardashevskiy1-2/+1
This introduces an NMI (Non Maskable Interrupt) interface with a single nmi_monitor_handler() method. A machine or a device can implement it. This searches for an QOM object with this interface and if it is implemented, calls it. The callback implements an action required to cause debug crash dump on in-kernel debugger invocation. The callback returns Error**. This adds a nmi_monitor_handle() helper which walks through all objects to find the interface. The interface method is called for all found instances. This adds support for it in qmp_inject_nmi(). Since no architecture supports it at the moment, there is no change in behaviour. This changes inject-nmi command description for HMP and QMP. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-01block: add backing-file option to block-streamJeff Cody1-1/+1
On some image chains, QEMU may not always be able to resolve the filenames properly, when updating the backing file of an image after a block job. For instance, certain relative pathnames may fail, or drives may have been specified originally by file descriptor (e.g. /dev/fd/???), or a relative protocol pathname may have been used. In these instances, QEMU may lack the information to be able to make the correct choice, but the user or management layer most likely does have that knowledge. With this extension to the block-stream api, the user is able to change the backing file of the active layer as part of the block-stream operation. This allows the change to be 'safe', in the sense that if the attempt to write the active image metadata fails, then the block-stream operation returns failure, without disrupting the guest. If a backing file string is not specified in the command, the backing file string to use is determined in the same manner as it was previously. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01block: extend block-commit to accept a string for the backing fileJeff Cody1-1/+18
On some image chains, QEMU may not always be able to resolve the filenames properly, when updating the backing file of an image after a block commit. For instance, certain relative pathnames may fail, or drives may have been specified originally by file descriptor (e.g. /dev/fd/???), or a relative protocol pathname may have been used. In these instances, QEMU may lack the information to be able to make the correct choice, but the user or management layer most likely does have that knowledge. With this extension to the block-commit api, the user is able to change the backing file of the overlay image as part of the block-commit operation. This allows the change to be 'safe', in the sense that if the attempt to write the overlay image metadata fails, then the block-commit operation returns failure, without disrupting the guest. If the commit top is the active layer, then specifying the backing file string will be treated as an error (there is no overlay image to modify in that case). If a backing file string is not specified in the command, the backing file string to use is determined in the same manner as it was previously. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01block: add QAPI command to allow live backing file changeJeff Cody1-0/+39
This allows a user to make a live change to the backing file recorded in an open image. The image file to modify can be specified 2 ways: 1) image filename 2) image node-name Note: this does not cause the backing file itself to be reopened; it merely changes the backing filename in the image file structure, and in internal BDS structures. It is the responsibility of the user to pass a filename string that can be resolved when the image chain is reopened, and the filename string is not validated. A good analogy for this command is that it is a live version of 'qemu-img rebase -u', with respect to changing the backing file string. [Jeff is offline so I respun this patch in his absence. Dropped image filename since using node-name is preferred and this is a new command. No need to introduce the limitations of finding images by filename. --Stefan] Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01block: make 'top' argument to block-commit optionalJeff Cody1-2/+3
Now that active layer block-commit is supported, the 'top' argument no longer needs to be mandatory. Change it to optional, with the default being the active layer in the device chain. [kwolf: Rebased and resolved conflict in tests/qemu-iotests/040] Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-29mc146818rtc: add rtc-reset-reinjection QMP commandMarcelo Tosatti1-0/+23
It is necessary to reset RTC interrupt reinjection backlog if guest time is synchronized via a different mechanism, such as QGA's guest-set-time command. Failing to do so causes both corrections to be applied (summed), resulting in an incorrect guest time. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-29Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell1-0/+5
Block patches for 2.1.0-rc0 # gpg: Signature made Fri 27 Jun 2014 19:50:32 BST using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: (47 commits) iotests: Fix 083 for out-of-tree builds iotests: Drop Python version from 065's Shebang iotests: Use $PYTHON for Python scripts iotests: Source common.env configure: Enable out-of-tree iotests iotests: Allow out-of-tree run block.c: Don't return success for bdrv_append_temp_snapshot() failure qemu-iotests: Add TestRepairQuorum to 041 to test drive-mirror node-name mode. block: Add replaces argument to drive-mirror blockjob: Fix recent BLOCK_JOB_ERROR regression blockjob: Fix recent BLOCK_JOB_READY regression virtio-blk: Rename complete_request_early to complete_request_vring virtio-blk: Unify {non-,}dataplane's request handlings virtio-blk: Schedule BH in the right context virtio-blk: Export request handling functions to dataplane virtio-blk: Make request completion function virtual block: acquire AioContext in qmp_query_blockstats() block: make bdrv_query_stats() static virtio-blk: Fix and clean up the in_sg and out_sg check virtio-blk: Fill in VirtIOBlockReq.out in dataplane code ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-27block: Add replaces argument to drive-mirrorBenoît Canet1-1/+3
drive-mirror will bdrv_swap the new BDS named node-name with the one pointed by replaces when the mirroring is finished. Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27char: report frontend open/closed state in 'query-chardev'Laszlo Ersek1-5/+14
In addition to the on-line reporting added in the previous patch, allow libvirt to query frontend state independently of events. Libvirt's path to identify the guest agent channel it cares about differs between the event added in the previous patch and the QMP response field added here. The event identifies the frontend device, by "id". The 'query-chardev' QMP command identifies the backend device (again by "id"). The association is under libvirt's control. RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1080376 Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-27block: Add node-name argument to drive-mirrorBenoît Canet1-0/+3
This new argument can be used to specify the node-name of the new mirrored BDS. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-19qmp: add query-acpi-ospm-status commandIgor Mammedov1-0/+22
... to get ACPI OSPM status reported by ACPI devices via _OST method. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19qmp: add query-memory-devices commandIgor Mammedov1-0/+27
... allowing to get state of present memory devices. Currently implemented only for PCDIMMDevice. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19qmp: clean out whitespaceMichael S. Tsirkin1-1/+1
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19qmp: add query-memdevHu Tao1-0/+38
Add qmp command query-memdev to query for information of memory devices Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-16qapi: output def_value_str when query command line optionsChunyan Liu1-0/+2
Change qapi interfaces to output the newly added def_value_str when querying command line options. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Leandro Dorileo <l@dorileo.org> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Chunyan Liu <cyliu@suse.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-22Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into stagingPeter Maydell1-1/+1
* remotes/qmp-unstable/queue/qmp: qapi: zero-initialize all QMP command parameters scripts/qapi.py: Avoid syntax not supported by Python 2.4 doc: add "setup" to list of migration states Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-20doc: add "setup" to list of migration statesPeter Feiner1-1/+1
On a slow VM (e.g., nested), you see the "setup" state when you query the migration status. Signed-off-by: Peter Feiner <peter@gridcentric.ca> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-19block: optimize zero writes with bdrv_write_zeroesPeter Lieven1-0/+3
this patch tries to optimize zero write requests by automatically using bdrv_write_zeroes if it is supported by the format. This significantly speeds up file system initialization and should speed zero write test used to test backend storage performance. I ran the following 2 tests on my internal SSD with a 50G QCOW2 container and on an attached iSCSI storage. a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX QCOW2 [off] [on] [unmap] ----- runtime: 14secs 1.1secs 1.1secs filesize: 937M 18M 18M iSCSI [off] [on] [unmap] ---- runtime: 9.3s 0.9s 0.9s b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct QCOW2 [off] [on] [unmap] ----- runtime: 246secs 18secs 18secs filesize: 51G 192K 192K throughput: 203M/s 2.3G/s 2.3G/s iSCSI* [off] [on] [unmap] ---- runtime: 8mins 45secs 33secs throughput: 106M/s 1.2G/s 1.6G/s allocated: 100% 100% 0% * The storage was connected via an 1Gbit interface. It seems to internally handle writing zeroes via WRITESAME16 very fast. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>