summaryrefslogtreecommitdiff
path: root/savevm.c
AgeCommit message (Collapse)AuthorFilesLines
2013-01-02savevm.c: cleanup system includesMichael Tokarev1-39/+1
savevm.c suffers from the same problem as some other files. Some years ago savevm.c was created from vl.c, moving some code from there into a separate file. At that time, all includes were just copied from vl.c to savevm.c, without checking which ones are needed and which are not. But actually most of that stuff is _not_ needed. More, some stuff is wrong, for example, *BSD #ifdef'ery around <util.h> vs <libutil.h> - for one, it fails to build on Debian/kFreebsd. Just remove all this. Maybe there's a possibility to clean it up further - like removing <windows.h> (and maybe including winsock.h for htons etc), and maybe it's possible to remove some internal #includes too, but I didn't check this. While at it, remove duplicate #include of qemu/timer.h. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-20savevm: New save live migration method: pendingJuan Quintela1-0/+19
Code just now does (simplified for clarity) if (qemu_savevm_state_iterate(s->file) == 1) { vm_stop_force_state(RUN_STATE_FINISH_MIGRATE); qemu_savevm_state_complete(s->file); } Problem here is that qemu_savevm_state_iterate() returns 1 when it knows that remaining memory to sent takes less than max downtime. But this means that we could end spending 2x max_downtime, one downtime in qemu_savevm_iterate, and the other in qemu_savevm_state_complete. Changed code to: pending_size = qemu_savevm_state_pending(s->file, max_size); DPRINTF("pending size %lu max %lu\n", pending_size, max_size); if (pending_size >= max_size) { ret = qemu_savevm_state_iterate(s->file); } else { vm_stop_force_state(RUN_STATE_FINISH_MIGRATE); qemu_savevm_state_complete(s->file); } So what we do is: at current network speed, we calculate the maximum number of bytes we can sent: max_size. Then we ask every save_live section how much they have pending. If they are less than max_size, we move to complete phase, otherwise we do an iterate one. This makes things much simpler, because now individual sections don't have to caluclate the bandwidth (it was implossible to do right from there). Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-20migration: make writes blockingJuan Quintela1-5/+0
Move all the writes to the migration_thread, and make writings blocking. Notice that are still using the iothread for everything that we do. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-5/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19migration: move include files to include/migration/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19monitor: move include files to include/monitor/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19exec: move include files to include/exec/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19net: reorganize headersPaolo Bonzini1-1/+1
Move public headers to include/net, and leave private headers in net/. Put the virtio headers in include/net/tap.h, removing the multiple copies that existed. Leave include/net/tap.h as the interface for NICs, and net/tap_int.h as the interface for OS-specific parts of the tap backend. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19janitor: do not include qemu-char everywherePaolo Bonzini1-1/+0
Touching char/char.h basically causes the whole of QEMU to be rebuilt. Avoid this, it is usually unnecessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02migration: handle EAGAIN while reading QEMUFilePaolo Bonzini1-6/+24
This will never happen right now (the assertion would fail). The next patch will set the socket or pipe in non-blocking mode, thus enabling this part of the code. Coroutines can just stop whenever they want with qemu_coroutine_yield. As soon as select tells the main loop that the migration stream is readable, the coroutine is re-entered directly in qemu_get_buffer, where it will read more data and pass it to the loading routines. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02migration: close socket QEMUFile from socket_closePaolo Bonzini1-0/+1
The common suffix now is process_incoming_migration+qemu_fclose. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02migration: replace qemu_stdio_fd with qemu_get_fdPaolo Bonzini1-11/+0
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02migration: add qemu_get_fdPaolo Bonzini1-0/+27
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02migration: consolidate QEMUFile methods in a single QEMUFileOps structPaolo Bonzini1-48/+60
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02migration: unify stdio-based QEMUFile operationsPaolo Bonzini1-17/+2
Now that qemu_fseek does not exist anymore, there is no reason to do an fseek before fread/fwrite when operating on an stdio file. Thus, unify the get/put_buffer callbacks used by qemu_fopen with those used for pipes. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-30vmstate: Add support for saving/loading bitmapsPeter Maydell1-0/+41
Add support for saving/loading bitmap.h bitmaps in vmstate. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Juan Quintela <quintela@redhat.com>
2012-10-17savevm: make qemu_file_put_notify() return errorsJuan Quintela1-2/+2
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17savevm: un-export qemu_file_set_error()Juan Quintela1-1/+1
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17savevm: Only qemu_fflush() can generate errorsJuan Quintela1-17/+18
Move the error check to the beggining of the callers. Once this is fixed qemu_file_set_if_error() is not used anymore, so remove it. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17savevm: make qemu_fill_buffer() be consistentJuan Quintela1-1/+1
It was setting last_error directly once, and with the helper the other time. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17savevm: unexport qemu_ftell()Juan Quintela1-1/+1
It was unused out of savevm.c. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-10-17savevm: unfold qemu_fclose_internal()Juan Quintela1-20/+6
It was used only one, and was only one if. It makes error handling saner. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17savevm: make qemu_fflush() return an error codeJuan Quintela1-16/+23
Adjust all the callers. We moved the set of last_error from inside qemu_fflush() to all the callers. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17savevm: Remove qemu_fseek()Juan Quintela1-21/+0
It has no users, and is only half implemented. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17savevm: unexport qemu_fflushJuan Quintela1-1/+1
It is not used outside of savevm.c Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-05cleanup useless return sentenceAmos Kong1-1/+0
This patch cleans up return sentences in the end of void functions. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-08-15Merge remote-tracking branch 'agraf/ppc-for-upstream' into stagingAnthony Liguori1-1/+1
* agraf/ppc-for-upstream: (24 commits) openpic: Added BRR1 register pseries: Update SLOF firmware image pseries dma: DMA window params added to PHB and DT population changed pseries: Add PCI MSI/MSI-X support pseries: Add trace event for PCI irqs pseries: Export find_phb() utility function for PCI code pseries: added allocator for a block of IRQs pseries: Separate PCI RTAS setup from common from emulation specific PCI setup pseries: Rework irq assignment to avoid carrying qemu_irqs around pseries: Remove extraneous prints pseries: Update SLOF PPC: spapr: Remove global variable PPC: spapr: Rework VGA select logic xbzrle: fix compilation on ppc32 spapr: Add support for -vga option Add one new file vga-pci.h and cleanup on all platforms Revert "PPC: e500: Use new MPIC dt format" ppc: Fix bug in handling of PAPR hypercall exits PPC: e500: add generic e500 platform PPC: e500: split mpc8544ds machine from generic e500 code ...
2012-08-15xbzrle: fix compilation on ppc32Alexander Graf1-1/+1
When compiling the xbzrle code on my ppc32 user space, I hit the following gcc compiler warning (treated as an error): cc1: warnings being treated as errors savevm.c: In function ‘xbzrle_encode_buffer’: savevm.c:2476: error: overflow in implicit constant conversion Fix this by making the cast explicit, rather than implicit. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-08-15block: Convert close calls to qemu_closeCorey Bryant1-2/+2
This patch converts all block layer close calls, that correspond to qemu_open calls, to qemu_close. Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-08Add xbzrle_encode_buffer and xbzrle_decode_buffer functionsOrit Wasserman1-0/+159
For performance we are encoding long word at a time. For nzrun we use long-word-at-a-time NULL-detection tricks from strcmp(): using ((lword - 0x0101010101010101) & (~lword) & 0x8080808080808080) test to find out if any byte in the long word is zero. Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com> Signed-off-by: Petter Svard <petters@cs.umu.se> Signed-off-by: Aidan Shribman <aidan.shribman@sap.com> Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-07-20savevm: split save_live into stage2 and stage3Juan Quintela1-5/+5
We split it into 2 functions, foo_live_iterate, and foo_live_complete. At this point, we only remove the bits that are for the other stage, functionally this is equivalent to previous code. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-20savevm: split save_live_setup from save_live_stateJuan Quintela1-2/+2
This patch splits stage 1 to its own function for both save_live users, ram and block. It is just a copy of the function, removing the parts of the other stages. Optimizations would came later. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-20savevm: introduce is_active methodJuan Quintela1-0/+15
Enable the creation of a method to tell migration if that section is active and should be migrate. We use it for blk-migration, that is normally not active. We don't create the method for RAM, as setups without RAM are very strange O:-) Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-20savevm: Refactor cancel operation in its own operationJuan Quintela1-2/+2
Intead of abusing stage with value -1. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-20savevm: Live migration handlers register the struct directlyJuan Quintela1-11/+7
Notice that the live migration users never unregister, so no problem about freeing the ops structure. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-20savevm: Use a struct to pass all handlersJuan Quintela1-29/+25
This would make easier to add more operations in the next patches. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-06-29No need to iterate if we already are over the limitJuan Quintela1-0/+3
If buffers are full, don't iterate, just exit. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-06-29Add tracepoints for savevm section start/endJuan Quintela1-0/+8
This allows to know how long each section takes to save. An awk script like this tells us sections that takes more that 10ms $1 ~ /savevm_state_iterate_end/ { /* Print savevm_section_end line when > 10ms duration */ if ($2 > 10000) { printf("%s times_missing=%u\n", $0, times_missing++); } } Signed-off-by: Juan Quintela <quintela@redhat.com> fix ws tracepoints Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-06-29Add MigrationParams structureIsaku Yamahata1-4/+9
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2012-06-18Merge remote-tracking branch 'afaerber-or/qom-next-2' into stagingAnthony Liguori1-6/+6
* afaerber-or/qom-next-2: (22 commits) qom: Push error reporting to object_property_find() qdev: Remove qdev_prop_exists() qbus: Initialize in standard way qbus: Make child devices links qdev: Connect busses with their parent devices qdev: Convert busses to QEMU Object Model qdev: Move SysBus initialization to sysbus.c qdev: Use wrapper for qdev_get_path qdev: Remove qdev_prop_set_defaults qdev: Clean up global properties qdev: Move bus properties to abstract superclasses qdev: Move bus properties to a separate global qdev: Push "type" property up to Object arm_l2x0: Rename "type" property to "cache-type" m48t59: Rename "type" property to "model" qom: Assert that public types have a non-NULL parent field qom: Drop type_register_static_alias() macro qom: Make Object a type qom: Add class_base_init qom: Add object_child_foreach() ...
2012-06-18qdev: Use wrapper for qdev_get_pathAnthony Liguori1-6/+6
This makes it easier to remove it from BusInfo. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [AF: Drop now unnecessary NULL initialization in scsibus_get_dev_path()] Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-15savevm: flush after saving vm statePaolo Bonzini1-1/+1
Writing vm state uses bdrv_pwrite, so it will automatically get flushes in writethrough mode. But doing a flush at the end in writeback mode is probably a good idea anyway. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-15w64: Fix time conversion for some versions of MinGW-w64Stefan Weil1-1/+2
tb.time is a time value, but not necessarily of the same size as time_t: while time_t is 64 bit for w64, tb.time still is 32 bit only. Therefore we need en explicit conversion. Signed-off-by: Stefan Weil <sw@weilnetz.de>
2012-03-19Merge remote-tracking branch 'sstabellini/saverestore-8' into stagingAnthony Liguori1-0/+71
* sstabellini/saverestore-8: xen: do not allocate RAM during INMIGRATE runstate xen mapcache: check if memory region has moved. xen: record physmap changes to xenstore Set runstate to INMIGRATE earlier Introduce "xen-save-devices-state" cirrus_vga: do not reset videoram Conflicts: qapi-schema.json Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-19Introduce "xen-save-devices-state"Stefano Stabellini1-0/+71
- add an "is_ram" flag to SaveStateEntry; - register_savevm_live sets is_ram for live_savevm devices; - introduce a "xen-save-devices-state" QAPI command that can be used to save the state of all devices, but not the RAM or the block devices of the VM. Changes in v8: - rename save-devices-state to xen-save-devices-state. Changes in v7: - rename save_devices to save-devices-state. Changes in v6: - remove the is_ram parameter from register_savevm_live and sets is_ram if the device is a live_savevm device; - introduce save_devices as a QAPI command, write a better description for it; - fix CODING_STYLE; - introduce a new doc to explain the save format used by save_devices. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-19Merge remote-tracking branch 'qemu-kvm/memory/urgent' into stagingAnthony Liguori1-0/+2
* qemu-kvm/memory/urgent: (42 commits) memory: check for watchpoints when getting code ram_addr exec: fix write tlb entry misused as iotlb Sparc: avoid AREG0 wrappers for memory access helpers Sparc: avoid AREG0 for memory access helpers TCG: add 5 arg helpers to def-helper.h softmmu templates: optionally pass CPUState to memory access functions i386: Remove REGPARM sparc64: implement PCI and ISA irqs sparc: reset CPU state on reset apb: use normal PCI device header for PBM device w64: Fix data type of next_tb and tcg_qemu_tb_exec softfloat: fix for C99 vmstate: fix varrays with uint32_t indexes Fix large memory chunks allocation with tcg_malloc. hw/pxa2xx.c: Fix handling of pxa2xx_i2c variable offset within region hw/pxa2xx_lcd.c: drop target_phys_addr_t usage in device state hw/pxa2xx_dma.c: drop target_phys_addr_t usage in device state ARM: Remove unnecessary subpage workarounds malta: Fix display for LED array malta: Use symbolic hardware addresses ...
2012-03-17vmstate: fix varrays with uint32_t indexesAmos Kong1-0/+2
VMSTATE_VARRAY_UINT32() is used in hw/ds1225y.c, and we checked VMS_VARRAY_UINT32 bit of field->flags in vmstate_load_state(), but we don't check this bit in vmstate_save_state(). Signed-off-by: Amos Kong <akong@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Acked-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-15qapi: Convert migrateLuiz Capitulino1-7/+6
The migrate command is one of those commands where HMP and QMP completely mix up together. This made the conversion to the QAPI (which separates the command into QMP and HMP parts) a bit difficult. The first important change to be noticed is that this commit completes the removal of the Monitor object from migration code, started by the previous commit. Another important and tricky change is about supporting the non-detached mode. That is, if the user doesn't pass '-d' the migrate command will lock the monitor and will only release it when migration is finished. To support this in the new HMP command (hmp_migrate()), it is necessary to create a timer which runs every second and checks if the migration is still active. If it is, the timer callback will re-schedule itself to run one second in the future. If the migration has already finished, the monitor lock is released and the user can use it normally. All these changes should be transparent to the user. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-15Purge migration of (almost) everything to do with monitorsLuiz Capitulino1-15/+14
The Monitor object is passed back and forth within the migration/savevm code so that it can print errors and progress to the user. However, that approach assumes a HMP monitor, being completely invalid in QMP. This commit drops almost every single usage of the Monitor object, all monitor_printf() calls have been converted into DPRINTF() ones. There are a few remaining Monitor objects, those are going to be dropped by the next commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-03 00:07:39 +0000