summaryrefslogtreecommitdiff
path: root/slirp
AgeCommit message (Collapse)AuthorFilesLines
2009-07-29slirp: Use monotonic clock if available (v2)Ed Swierk3-32/+2
Calling gettimeofday() to compute a time interval can cause problems if the system clock jumps forwards or backwards; replace updtime() with qemu_get_clock(rt_clock), which calls clock_gettime(CLOCK_MONOTONIC) if it is available. Also remove some useless macros. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-22slirp: Fix guestfwd for incoming dataJan Kiszka2-8/+8
Unless a virtual server address was explicitly defined (which is impossible with the legacy -net channel format), guestfwd did not properly forwarded host->guest packets. This patch fixes it. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-01Fix breakage by obsolete _P() for goodBlue Swirl8-99/+92
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-29slirp: tftp: Relax filename format checkJan Kiszka1-3/+5
[ Applies on top of my recently posted slirp series. ] Allow tftp requests with filenames that do not start with a slash. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Save/restore bootp client statesJan Kiszka1-1/+27
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Enable multiple instancesJan Kiszka2-9/+18
Once again this was a long journey to reach the destination: Allow to instantiate slirp multiple times. But as in the past, the journey was worthwhile, cleaning up, fixing and enhancing various parts of the user space network stack along the way. What is this particular change good for? Multiple slirps instances allow separated user space networks for guests with multiple NICs. This is already possible, but without any slirp support for the second network, ie. without a chance to talk to that network from the host via IP. We have a legacy guest system here that benefits from this slirp enhancement, allowing us to run both of its NICs purely over unprivileged user space IP stacks. Another benefit of this patch is that it simply removes an artificial restriction of the configuration space qemu is providing, avoiding another source of surprises that users may face when playing with possible setups. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Allocate/free stack instance dynamicallyJan Kiszka4-15/+21
Allocate the internal slirp state dynamically and provide and call slirp_cleanup to properly release it after use. This patch finally unbreaks slirp release and re-instantiation via host_net_* monitor commands. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Use internal state in interfaceJan Kiszka5-43/+44
This now also exports the internal state to the slirp users in qemu, returning it from slirp_init and expecting it along with service invocations. Additionally provide an opaque value interface for the callbacks from slirp into the qemu core. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Factor out internal state structureJan Kiszka29-408/+479
The essence of this patch is to stuff (almost) all global variables of the slirp stack into the structure Slirp. In this step, we still keep the structure as global variable, directly accessible by the whole stack. Changes to the external interface of slirp will be applied in the following patches. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Drop link_up checks from if_output and slirp_socket_can_recvJan Kiszka2-7/+1
link_up is true once slirp is initialized, so these check are really not required. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Clean up timeout handling around slirp_select_fill/pollJan Kiszka3-39/+4
Again lot of dead code. Remove it. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Kill slirp_is_initedJan Kiszka2-8/+26
Avoid the need for slirp_is_inited by refactoring the protected slirp_select_* functions. This also avoids the clearing of all fd sets on select errors. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Clean up updtimeJan Kiszka2-9/+5
Drop redundant typecasts in both variants and remove the pointless round-up in the UNIX version. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Make IP packet ID consistentJan Kiszka2-2/+7
Currently, ip_id is always initialized to 0 on slirp startup (despite the broken attempt to derive it from the clock). This is good for reproducibility. But it is not preserved across save/restore. This patch therefore drops the dead initialization code from ip_init and introduces ip_id to the persistent slirp state. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Factor out one-time initializationJan Kiszka3-37/+41
In order to prepare re-initialization and multi-instance slirp, factor out init code that is of global scope and (at least for now) only need to be run once. This also fixes the potentially uninitialized use of our_addr in get_dns_addr. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: tftp: Rework filename handlingJan Kiszka1-22/+16
This changes the filename handling from a static buffer in tftp_session for the client-provided name + prefix to a dynamically allocated buffer that keeps the combined path in one place. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: tftp: Refactor tftp_handle_rrqJan Kiszka1-28/+21
Specifically make the filename extraction more readable, and always report errors back to the client. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: tftp: Clean up tftp_send_errorJan Kiszka1-8/+5
The return code of tftp_send_error is not used, drop it. And also make sure to always terminate the session. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: tftp: Cleanup tftp_prefix checkJan Kiszka1-8/+7
Perform check for set prefix early (if it's not given, tftp is disabled) and drop redundant second check. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Drop unused icmp_var.hJan Kiszka2-50/+0
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Cleanup and basic reanimation of debug codeJan Kiszka6-25/+13
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Drop statistic codeJan Kiszka18-476/+6
As agreed on the mailing list, there is no interest in keeping the usually disabled slirp statistics in the tree. So this patch removes them. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Drop dead codeJan Kiszka26-1650/+22
After all its years inside the qemu tree, there is no point in keeping the dead code paths of slirp. This patch is a first round of removing usually commented out code parts. More cleanups need to follow (and maybe finally a proper reindention). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Add info usernet for dumping connection statesJan Kiszka5-55/+90
Break out sockstats from the slirp statistics and present them under the new info category "usernet". This patch also improves the current output /wrt proper reporting connection source and destination. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Mark sockets of incoming TCP connectionsJan Kiszka2-0/+2
Required for pretty-printing. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Do not allow to remove non-hostfwd socketsJan Kiszka1-9/+5
Prevent that the users accidentally shoots down dynamic sockets. This allows to remove looping for removals as there can now only be one match. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Explicitely mark host-forwarding socketsJan Kiszka3-3/+4
Mark sockets that describe host forwardings. This is required for their (and only their) proper deletion and for pretty-printing. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Prepare for persistent socket state flagsJan Kiszka5-13/+26
This prepares for adding flags to socket.so_state that must not be removed during the lifetime of a socket. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Bind support for host forwarding rulesJan Kiszka7-25/+27
Extend the hostfwd rule format so that the user can specify on which host interface qemu should listen for incoming connections. If omitted, binding will takes place against all interfaces. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Fix port comparision in slirp_remove_hostfwdJan Kiszka1-2/+6
For UDP host forwardings, fport is not stable, every outgoing packet of the redirection can modify it. Use getsockname instead to look up the port that is actually used on the host side. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Rework external configuration interfaceJan Kiszka3-39/+38
With the internal IP configuration made more flexible, we can now enhance the user interface. This patch adds a number of new options to "-net user": net (address and mask), host, dhcpstart, dns and smbserver. It also renames "redir" to "hostfwd" and "channel" to "guestfwd" in order to (hopefully) clarify their meanings. The format of guestfwd is extended so that the user can define not only the port but also the virtual server's IP address the forwarding starts from. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Rework internal configurationJan Kiszka13-142/+149
The user mode IP stack is currently only minimally configurable /wrt to its virtual IP addresses. This is unfortunate if some guest has a fixed idea of which IP addresses to use. Therefore this patch prepares the stack for fully configurable IP addresses and masks. The user interface and default addresses remain untouched in this step, they will be enhanced in the following patch. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Move smb, redir, tftp and bootp parameters and -net channelJan Kiszka5-6/+19
So far a couple of slirp-related parameters were expressed via stand-alone command line options. This it inconsistent and unintuitive. Moreover, it prevents both dynamically reconfigured (host_net_add/ delete) and multi-instance slirp. This patch refactors the configuration by turning -smb, -redir, -tftp and -bootp as well as -net channel into options of "-net user". The old stand-alone command line options are still processed, but no longer advertised. This allows smooth migration of management applications to to the new syntax and also the extension of that syntax later in this series. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29Revert "User networking: Show active connections"Jan Kiszka2-28/+0
This reverts commit 1c6ed9f3379faac83da0ed3e95cbd49003ac0dd1. It's redundant to slirp statistics, which are going to be split up / reworked later on. Conflicts: monitor.c net.c Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Refactor tcp_ctlJan Kiszka1-79/+30
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Drop redundant lines from udp_inputJan Kiszka1-2/+0
The socket faddr/fport is already updated a few lines below, so these are completely redundant. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-13Fix mingw32 build warningsBlue Swirl2-2/+11
Work around buffer and ioctlsocket argument type signedness problems Suppress a prototype which is unused on mingw32 Expand a macro to avoid warnings from some GCC versions Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-09slirp: Reorder initializationJan Kiszka2-2/+2
This patch reorders the initialization of slirp itself as well as its associated features smb and redirection. So far the first reference to slirp triggered the initialization, independent of the actual -net user option which may carry additional parameters. Now we save any request to add a smb export or some redirections until the actual initialization of the stack. This also allows to move a few parameters that were passed via global variable into the argument list of net_slirp_init. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-05-28User networking: Show active connectionsAlexander Graf2-0/+28
In case you're wondering what connections exactly you have open or maybe redir'ed in the past, you can't really find out from qemu right now. This patch enables you to see all current connections the host only networking holds open, so you can kill them using the previous patch. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27User Networking: Enable removal of redirectionsAlexander Graf2-0/+24
Using the new host_net_redir command you can easily create redirections on the fly while your VM is running. While that's great, it's missing the removal of redirections, in case you want to have a port closed again at a later point in time. This patch adds support for removal of redirections. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22slirp: Reassign same address to same DHCP clientJan Kiszka1-3/+5
In case a client restarts a DHCP recovery without releasing its old address, reassign the same address to prevent consuming free addresses and moving away from the standard client address. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2009-05-21Cast pointer arguments of get/setsockopt, send to void * to keep GCCmalc1-1/+1
from producing a warning about pointer type mismatches with Winsock Signed-off-by: malc <av1474@comtv.ru>
2009-05-13Replace gcc variadic macro extension with C99 versionBlue Swirl1-3/+3
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-04-21slirp: Handle DHCP requests for specific IP (Jan Kiszka)aliguori2-34/+95
This adds proper handling of the ciaddr field as well as the "Requested IP Address" option to slirp's DHCP server. If the client requests an invalid or used IP, a NAK reply is sent, if it requests a specific but valid IP, this is now respected. NAK'ing invalid IPs is specifically useful when changing the slirp IP range via '-net user,ip=...' while the client saved its previously used address and tries to reacquire it. Now this will be NAK'ed and the client will start a new discovery round. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7198 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18Use ANSI prototypes to please sparseblueswir12-17/+8
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7176 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18Move bootp_filename to avoid a sparse warningblueswir11-0/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7174 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05Fix some win32 compile warningsblueswir12-1/+6
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6984 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-16Delete some unused macros detected with -Wp,-Wunused-macros useblueswir13-3/+0
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6856 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-08Fix windows build and clean up use of <windows.h>aliguori1-1/+0
We want to globally define WIN_LEAN_AND_MEAN and WINVER to particular values so let's do it in OS_CFLAGS. Then, we can pepper in windows.h includes where using #includes that require it. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6783 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07Sparse fixes: NULL use, header order, ANSI prototypes, staticblueswir113-176/+94
Fix Sparse warnings: * use NULL instead of plain 0 * rearrange header include order to avoid redefining types accidentally * ANSIfy SLIRP * avoid "restrict" keyword * add static git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6736 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-30 12:04:20 +0000