summaryrefslogtreecommitdiff
path: root/target-arm/cpu-qom.h
AgeCommit message (Collapse)AuthorFilesLines
2014-02-26target-arm: Implement AArch64 ID and feature registersPeter Maydell1-0/+10
Implement the AArch64-specific ID and feature registers. Although many of these are currently not used by the architecture (and so always zero for all implementations), we define the full set of fields in the ARMCPU struct for symmetry. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2013-12-17ARM: cpu: add "reset_hivecs" propertyAntony Pavlov1-0/+1
Add an ARM CPU property for the reset value of hivecs as it is a board/SoC configurable setting. The existence of the property is conditional on the ARM CPU not being M class. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: b04216c6bda4bd163f44a55bba552d0e8267481f.1387160489.git.peter.crosthwaite@xilinx.com [ PC Changes: * Elaborated commit message * refactored to use qdev_property_add_static ] Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-10target-arm: Don't hardcode KVM target CPU to be A15Peter Maydell1-0/+5
Instead of assuming that a KVM target CPU must always be a Cortex-A15 and hardcoding this in kvm_arch_init_vcpu(), store the KVM_ARM_TARGET_* value in the ARMCPU class, and use that. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1385140638-10444-10-git-send-email-peter.maydell@linaro.org
2013-12-10target-arm: Allow secondary KVM CPUs to be booted via PSCIPeter Maydell1-0/+3
New ARM boards are generally expected to boot their secondary CPUs via the PSCI interface, rather than ad-hoc "loop around in holding pen code" as hw/arm/boot.c implements. In particular this is necessary for mach-virt kernels. For KVM we achieve this by creating the VCPUs with a feature flag marking them as starting in PSCI powered-down state; the guest kernel will then make a PSCI call (implemented in the host kernel) to start the secondaries at an address of its choosing once it has got the primary CPU up. Implement this setting of the feature flag, controlled by a qdev property for ARMCPU, which board code can set if it is a PSCI system. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1385140638-10444-7-git-send-email-peter.maydell@linaro.org
2013-12-10target-arm: Add ARMCPU field for Linux device-tree 'compatible' stringPeter Maydell1-0/+3
Linux requires device tree CPU nodes to include a 'compatible' string describing the CPU. Add a field in the ARMCPU struct for this so that boards which construct a device tree can insert the correct CPU nodes. Note that there is currently no officially specified 'compatible' string for the TI925T, Cortex-M3 or SA1110 CPUs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1385140638-10444-6-git-send-email-peter.maydell@linaro.org
2013-09-10target-arm: Add AArch64 gdbstub supportAlexander Graf1-0/+2
We want to be able to debug AArch64 guests. So let's add the respective gdb stub functions and xml descriptions that allow us to do so. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-12-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-6-git-send-email-john.rigby@linaro.org [PMM: dropped unused fp regs XML for now; moved 64 bit only functions to new gdbstub64.c; these are hooked up in AArch64CPU, not via ifdefs in ARMCPU] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-10target-arm: Add AArch64 translation stubAlexander Graf1-0/+5
We should translate AArch64 mode separately from AArch32 mode. In AArch64 mode, registers look vastly different, instruction encoding is completely different, basically the system turns into a different machine. So let's do a simple if() in translate.c to decide whether we can handle the current code in the legacy AArch32 code or in the new AArch64 code. So far, the translation always complains about unallocated instructions. There is no emulator functionality in this patch! Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-11-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-5-git-send-email-john.rigby@linaro.org [PMM: * provide no-op versions of a64 functions ifndef TARGET_AARCH64; this lets us avoid #ifdefs in translate.c * insert the missing call to disas_a64_insn() * stash the insn in the DisasContext rather than reloading it in real_unallocated_encoding() ] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-10target-arm: Add new AArch64CPUInfo base class and subclassesPeter Maydell1-0/+12
Create a new AArch64CPU class; all 64-bit capable ARM CPUs are subclasses of this. (Currently we only support one, the "any" CPU used by linux-user.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-8-git-send-email-peter.maydell@linaro.org
2013-08-20target-arm: Implement the generic timerPeter Maydell1-0/+9
The ARMv7 architecture specifies a 'generic timer' which is implemented via cp15 registers. Newer kernels will prefer to use this rather than a devboard-level timer. Implement the generic timer for TCG; for KVM we will already use the hardware's virtualized timer for this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Message-id: 1376065080-26661-4-git-send-email-peter.maydell@linaro.org
2013-07-27cpu: Introduce CPUClass::gdb_{read,write}_register()Andreas Färber1-0/+3
Completes migration of target-specific code to new target-*/gdbstub.c. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23cpu: Turn cpu_get_phys_page_debug() into a CPUClass hookAndreas Färber1-0/+2
Change breakpoint_invalidate() argument to CPUState alongside. Since all targets now assign a softmmu-only field, we can drop helpers cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd(). Prepares for changing cpu_memory_rw_debug() argument to CPUState. Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09cpu: Drop unnecessary dynamic casts in *_env_get_cpu()Andreas Färber1-1/+1
A transition from CPUFooState to FooCPU can be considered safe, just like FooCPU::env access in the opposite direction. The only benefit of the FOO_CPU() casts would be protection against bogus CPUFooState pointers, but then surrounding code would likely break, too. This should slightly improve interrupt etc. performance when going from CPUFooState to FooCPU. For any additional CPU() casts see 3556c233d931ad5ffa46a35cb25cfc057732ebb8 (qom: allow turning cast debugging off). Reported-by: Anthony Liguori <aliguori@us.ibm.com> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28cpu: Turn cpu_dump_{state,statistics}() into CPUState hooksAndreas Färber1-0/+3
Make cpustats monitor command available unconditionally. Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec() arguments to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-25target-arm: Reinitialize all KVM VCPU registers on resetPeter Maydell1-1/+5
Since the ARM KVM API doesn't include a "reset this VCPU" ioctl, we have to capture the initial values of every register it knows about so that we can reset the VCPU by feeding those values back again. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-25target-arm: Convert TCG to using (index,value) list for cp migrationPeter Maydell1-0/+20
Convert the TCG ARM target to using an (index,value) list for migrating coprocessors. The primary benefit of the (index,value) list is for passing state between KVM and QEMU, but it works for TCG-to-TCG migration as well and is a useful self-contained first step. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-04-19target-arm: port ARM CPU save/load to use VMStateJuan Quintela1-0/+4
Port the ARM CPU save/load code to use VMState. Some state is saved in a slightly different order to simplify things -- for example arrays are saved one after the other rather than 'striped', and we always save all 32 VFP registers even if the CPU happens to only have 16. Use one subsection for each feature. This means that we don't need to bump the version field each time that a new feature gets introduced. Signed-off-by: Juan Quintela <quintela@redhat.com> [PMM: fixed conflicts, updated to use cpu_class_set_vmsd(), updated with new/removed fields since original patch, changed to use custom VMStateInfo for cpsr rather than presave/postload hooks, corrected subsection names so vmload doesn't fail] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-12target-arm: Override do_interrupt for ARMv7-M profileAndreas Färber1-0/+1
Enable ARMCPUInfo to specify a custom class_init functions. Introduce arm_v7m_class_init() and use it for "cortex-m3" model. Instead of forwarding from arm_cpu_do_interrupt() to do_interrupt_v7m(), override CPUClass::do_interrupt with arm_v7m_cpu_do_interrupt() in arm_v7m_class_init(). Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12cpu: Replace do_interrupt() by CPUClass::do_interrupt methodAndreas Färber1-0/+2
This removes a global per-target function and thus takes us one step closer to compiling multiple targets into one executable. It will also allow to override the interrupt handling for certain CPU families. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-03cpu: Introduce ENV_OFFSET macrosAndreas Färber1-0/+2
Introduce ENV_OFFSET macros which can be used in non-target-specific code that needs to generate TCG instructions which reference CPUState fields given the cpu_env register that TCG targets set up with a pointer to the CPUArchState struct. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16target-arm: Update ARMCPU to QOM realizefnAndreas Färber1-1/+2
Turn arm_cpu_realize() into a QOM realize function, no longer called via cpu.h prototype. To maintain the semantics of cpu_init(), set realized = true explicitly in cpu_arm_init(). Move GDB coprocessor registration, CPU reset and vCPU initialization into the realizefn. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19qom: move include files to include/qom/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-20target-arm: Convert cp15 crn=1 registersPeter Maydell1-0/+1
Convert the cp15 crn=1 registers to the new scheme. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20target-arm: Add register_cp_regs_for_features()Peter Maydell1-0/+1
Add new function register_cp_regs_for_features() as a place to register coprocessor registers dependent on feature flags. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-20target-arm: initial coprocessor register frameworkPeter Maydell1-0/+3
Initial infrastructure for data-driven registration of coprocessor register implementations. We still fall back to the old-style switch statements pending complete conversion of all existing registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-04-27target-arm: Move A9 config_base_address reset value to ARMCPUPeter Maydell1-0/+1
Move the A9 config_base_address cp15 register reset value to ARMCPU. This should become a QOM property so that the Highbank board can set it without having to pull in cpu-qom.h, but at least this avoids the implicit dependency on reset ordering that the previous workaround had. Cc: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-27target-arm: Change cpu_arm_init() return type to ARMCPUAndreas Färber1-1/+0
Make cpu_arm_init() return a QOM ARMCPU, so that we don't need to obtain an ARMCPU through arm_env_get_cpu() in machine init code. This requires to adjust the inclusion site of cpu-qom.h and in turn, forward-looking, to homogenize its include order. cpu_init() must still return a CPUARMState for backwards and cross-target compatibility, so adjust the cpu_init macro. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-04-21target-arm: Move cache ID register setup to cpu specific init fnsPeter Maydell1-0/+5
Move cache ID register reset out of cpu_reset_model_id() by creating a field for the reset value in ARMCPU and setting it up in the cpu specific init functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Move feature register setup to per-CPU init fnsPeter Maydell1-0/+14
Move feature register value setup to per-CPU init functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Move SCTLR reset value setup to per cpu init fnsPeter Maydell1-0/+1
Move the reset value of SCTLR to ARMCPU, initialised in the per-cpu init functions. It can then be reset by a simple copy, and we can drop the code from cpu_reset_model_id(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Move CTR setup to per cpu init fnsPeter Maydell1-0/+1
Move CTR (cache type register) value to an ARMCPU field set up by per-cpu init fns. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Move MVFR* setup to per cpu init fnsPeter Maydell1-0/+2
Move the MVFR* VFP feature register values to ARMCPU, so they are set up by the implementation-specific instance init functions rather than in cpu_reset_model_id(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Move FPSID config to cpu init fnsPeter Maydell1-0/+1
Move the reset FPSID to the ARMCPU struct, and set it in the per-implementation instance init function. At reset we then just copy the reset value into the CPUARMState field. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Move feature bit settings to CPU init fnsPeter Maydell1-0/+1
Move the setting of the feature bits from cpu_reset_model_id() to each CPU's instance init function. This requires us to move the features field in CPUARMState so that it is not cleared on reset. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de>
2012-04-21target-arm: Add QOM subclasses for each ARM cpu implementationPeter Maydell1-0/+12
Register subclasses for each ARM CPU implementation. Let arm_cpu_list() enumerate CPU subclasses in alphabetical order, except for special value "any". Replace cpu_arm_find_by_name()'s string -> CPUID lookup by storing the CPUID (aka MIDR, Main ID Register) value in the class. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-29target-arm: Minimalistic CPU QOM'ificationAndreas Färber1-0/+71
Introduce only one non-abstract type TYPE_ARM_CPU and do not touch cp15 registers to not interfere with Peter's ongoing remodelling. Embed CPUARMState as first (additional) field of ARMCPU. Let CPUClass::reset() call cpu_state_reset() for now. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.1 (git 2.18.0) at 2024-05-14 23:51:50 +0000