summaryrefslogtreecommitdiff
path: root/target-arm/translate-a64.c
AgeCommit message (Collapse)AuthorFilesLines
2014-03-13cpu: Move breakpoints field from CPU_COMMON to CPUStateAndreas Färber1-2/+2
Most targets were using offsetof(CPUFooState, breakpoints) to determine how much of CPUFooState to clear on reset. Use the next field after CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise. Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-10target-arm: Fix intptr_t vs tcg_target_longRichard Henderson1-1/+1
Fixes a build error when these are different, e.g. x32. Signed-off-by: Richard Henderson <rth@twiddle.net> Message-id: 1394043257-4800-1-git-send-email-rth@twiddle.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26target-arm: A64: Implement MSR (immediate) instructionsPeter Maydell1-1/+24
Implement the MSR (immediate) instructions, which can update the PSTATE SP and DAIF fields. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-02-26target-arm: A64: Implement WFIPeter Maydell1-1/+4
Implement the WFI instruction for A64; this just involves wiring up the instruction, and adding a gen_a64_set_pc_im() which was accidentally omitted from the A64 decoder top loop. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-02-26target-arm: Get MMU index information correct for A64 codePeter Maydell1-1/+1
Emit the correct MMU index information for loads and stores from A64 code, rather than hardwiring it to "always kernel mode", by storing the exception level in the TB flags, and make cpu_mmu_index() return the right answer when the CPU is in AArch64 mode. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-02-26target-arm: Implement AArch64 CurrentEL sysregPeter Maydell1-0/+7
Implement the CurrentEL sysreg. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-02-20target-arm: A64: Implement unprivileged load/storePeter Maydell1-32/+37
Implement the unprivileged load and store instructions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-20target-arm: A64: Implement narrowing three-reg-diff operationsPeter Maydell1-1/+59
Implement the narrowing three-reg-diff operations: ADDHN, RADDHN, SUBHN and RSUBHN. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-20target-arm: A64: Implement the wide 3-reg-different operationsPeter Maydell1-1/+40
Implement the wide three-reg-different operations: SADDW, UADDW, SSUBW and USUBW. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-20target-arm: A64: Add most remaining three-reg-diff widening opsPeter Maydell1-21/+88
Add the remainder of the 64x64->128 operations in the three-reg-diff category except for PMULL, PMULL2. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-20target-arm: A64: Add opcode comments to disas_simd_three_reg_diffPeter Maydell1-11/+11
The opcode switch in disas_simd_three_reg_diff() is missing the customary comments indicating which cases correspond to which instructions. Add them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-20target-arm: A64: Implement store-exclusive for system modePeter Maydell1-6/+62
System mode store-exclusive use a different code path to usermode ones; implement this missing code, in a similar way to the 32 bit version. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-20target-arm: Remove unnecessary code now read/write fns can't failPeter Maydell1-2/+0
Now that cpreg read and write functions can't fail and throw an exception, we can remove the code from the translator that synchronises the guest PC in case an exception is thrown. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-20target-arm: Split cpreg access checks out from read/write functionsPeter Maydell1-0/+11
Several of the system registers handled via the ARMCPRegInfo mechanism have access trap control bits controlling whether the registers are accessible to lower privilege levels. Replace the existing mechanism (allowing the read and write functions to return EXCP_UDEF if access is denied) with a dedicated "check access rights" function pointer in the ARMCPRegInfo. This will allow us to simplify some of the register definitions, which no longer need read/write functions purely to handle the access checks. We take the opportunity to define the return value from the access checking function in a way that allows us to set the correct exception syndrome information for exceptions taken to AArch64 (which may need to distinguish access failures due to a configurable trap or enable from other kinds of access failure). This commit defines the new mechanism but does not move any of the registers across to use it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-02-20target-arm: Log bad system register accesses with LOG_UNIMPPeter Maydell1-1/+6
Log guest attempts to access unimplemented system registers via the LOG_UNIMP reporting mechanism (for both the 32 bit and 64 bit instruction sets). This is particularly useful for debugging problems where the guest is trying to use a system register that QEMU doesn't implement. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-02-20target-arm: A64: Implement remaining 3-same instructionsPeter Maydell1-4/+48
Implement the remaining instructions in the SIMD 3-reg-same and scalar-3-reg-same groups: FMULX, FRECPS, FRSQRTS, FACGE, FACGT, FMLA and FMLS. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-20target-arm: A64: Implement floating point pairwise insnsAlex Bennée1-38/+86
Add support for the floating-point pairwise operations FADDP, FMAXP, FMAXNMP, FMINP and FMINNMP. To do this we use the code which was previously handling only integer pairwise operations, and push the integer-specific decode and handling of unallocated cases up one level in the call tree, so we can also call it from the floating-point section of the decoder. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-20target-arm: A64: Implement SIMD FP compare and set insnsAlex Bennée1-12/+185
This adds all forms of the SIMD floating point and set instructions: FCM(GT|GE|EQ|LE|LT) Most of the heavy lifting is done by either the existing neon helpers or some new helpers for the 64bit double cases. Most of the code paths are common although the 2misc versions are a little special as they compare against zero. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> [PMM: fixed some minor bugs, added the 2-misc-scalar encoding] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-20target-arm: A64: Implement scalar three different instructionsPeter Maydell1-1/+94
Implement the scalar three different instruction group: it only has three instructions in it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-20target-arm: A64: Implement SIMD scalar indexed instructionsPeter Maydell1-33/+82
Implement the SIMD scalar indexed instructions. The encoding here is nearly identical to the vector indexed grouping, so we combine the two. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-20target-arm: A64: Implement long vector x indexed insnsPeter Maydell1-5/+139
Implement the 'long' operations in the vector x indexed element category. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-20target-arm: A64: Implement plain vector SIMD indexed element insnsPeter Maydell1-1/+247
Implement all the SIMD vector x indexed element instructions in the subcategory which are not 'long' ops. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-08disas: Implement disassembly output for A64Claudio Fontana1-1/+1
Use libvixl to implement disassembly output in debug logs for A64, for use with both AArch64 hosts and targets. Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org> [PMM: * added support for target disassembly * switched to custom QEMUDisassembler so the output format matches what QEMU expects * make sure we correctly fall back to "just print hex" if we didn't build the AArch64 disassembler because of lack of a C++ compiler * rename from 'aarch64' to 'arm-a64' because this is a disassembler for the A64 instruction set * merge aarch64.c and aarch64-cxx.cc into one C++ file * simplify the aarch64.c<->aarch64-cxx.cc interface] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-08target-arm: A64: Add FNEG and FABS to the SIMD 2-reg-misc groupPeter Maydell1-3/+20
Add the SIMD FNEG and FABS instructions in the SIMD 2-reg-misc group. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-08target-arm: A64: Add 2-reg-misc REV* instructionsAlex Bennée1-1/+70
Add the byte-reverse operations REV64, REV32 and REV16 from the two-reg-misc group. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-08target-arm: A64: Add narrowing 2-reg-misc instructionsPeter Maydell1-2/+83
Add the narrowing integer instructions in the 2-reg-misc class. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-08target-arm: A64: Implement 2-reg-misc CNT, NOT and RBITPeter Maydell1-6/+28
Implement the 2-reg-misc CNT, NOT and RBIT instructions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-08target-arm: A64: Implement 2-register misc compares, ABS, NEGPeter Maydell1-2/+134
Implement the simple 2-register-misc operations we can share with the scalar-two-register-misc code. (SUQADD, USQADD, SQABS, SQNEG also fall into this category, but aren't implemented in the scalar-2-register case yet either.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-08target-arm: A64: Add skeleton decode for SIMD 2-reg misc groupPeter Maydell1-1/+109
Add a skeleton decode for the SIMD 2-reg misc group. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-08target-arm: A64: Add SIMD simple 64 bit insns from scalar 2-reg miscPeter Maydell1-1/+86
Implement the simple 64 bit integer operations from the SIMD scalar 2-register misc group (C3.6.12): the comparisons against zero, plus ABS and NEG. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-08target-arm: A64: Implement remaining integer scalar-3-same insnsPeter Maydell1-19/+87
Implement the remaining integer instructions in the scalar-three-reg-same group: SQADD, UQADD, SQSUB, UQSUB, SQSHL, UQSHL, SQRSHL, UQRSHL, SQDMULH, SQRDMULH. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-08target-arm: A64: Implement scalar pairwise opsPeter Maydell1-1/+113
Implement the instructions in the scalar pairwise group (C3.6.8). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-08target-arm: A64: Implement pairwise integer ops from 3-reg-same SIMDPeter Maydell1-1/+123
Implement the pairwise integer operations in the 3-reg-same SIMD group: ADDP, SMAXP, SMINP, UMAXP and UMINP. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-08target-arm: A64: Implement remaining non-pairwise int SIMD 3-reg-same insnsPeter Maydell1-4/+127
Implement the SIMD 3-reg-same instructions where the size == 3 case is reserved: SHADD, UHADD, SRHADD, URHADD, SHSUB, UHSUB, SMAX, UMAX, SMIN, UMIN, SABD, UABD, SABA, UABA, MLA, MLS, MUL, PMUL, SQRDMULH, SQDMULH. (None of these have scalar-3-same versions.) This completes the non-pairwise integer instructions in this category. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-02-08target-arm: A64: Implement SIMD 3-reg-same shift and saturate insnsPeter Maydell1-22/+112
Implement the SIMD 3-reg-same instructions SQADD, UQADD, SQSUB, UQSUB, SSHL, USHL, SQSHl, UQSHL, SRSHL, URSHL, SQRSHL, UQRSHL; these are all simple calls to existing Neon helpers. We also enable SSHL, USHL, SRSHL and URSHL for the 3-reg-same-scalar category (but not the others because they can have non-size-64 operands and the scalar_3reg_same function doesn't support that yet.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-01-31target-arm: A64: Add SIMD shift by immediateAlex Bennée1-2/+373
This implements a subset of the AdvSIMD shift operations (namely all the none saturating or narrowing ones). The actual shift generation code itself is common for both the scalar and vector cases but wrapped with either vector element iteration or the fp reg access. The rounding operations need to take special care to correctly reflect the result of adding rounding bits on high bits as the intermediates do not truncate. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-31target-arm: A64: Add simple SIMD 3-same floating point opsPeter Maydell1-2/+188
Implement a simple subset of the SIMD 3-same floating point operations. This includes a common helper function used for both scalar and vector ops; FABD is the only currently implemented shared op. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-01-31target-arm: A64: Add integer ops from SIMD 3-same groupPeter Maydell1-1/+164
Add some of the integer operations in the SIMD 3-same group: specifically, the comparisons, addition and subtraction. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-01-31target-arm: A64: Add logic ops from SIMD 3 same groupPeter Maydell1-1/+72
Add support for the logical operations (ORR, AND, BIC, ORN, EOR, BSL, BIT and BIF) from the SIMD 3 register same group (C3.6.16). Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-01-31target-arm: A64: Add top level decode for SIMD 3-same groupPeter Maydell1-1/+44
Add top level decode for the A64 SIMD three regs same group (C3.6.16), splitting it into the pairwise, logical, float and integer subgroups. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-01-31target-arm: A64: Add SIMD scalar 3 same add, sub and compare opsPeter Maydell1-1/+130
Implement the add, sub and compare ops from the SIMD "scalar three same" group. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-01-31target-arm: A64: Add SIMD three-different ABDL instructionsPeter Maydell1-2/+33
Implement the absolute-difference instructions in the SIMD three-different group: SABAL, SABAL2, UABAL, UABAL2, SABDL, SABDL2, UABDL, UABDL2. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-01-31target-arm: A64: Add SIMD three-different multiply accumulate insnsPeter Maydell1-1/+232
Add support for the multiply-accumulate instructions from the SIMD three-different instructions group (C3.6.15): * skeleton decode of unallocated encodings and split of the group into its three sub-parts * framework for handling the 64x64->128 widening subpart * implementation of the multiply-accumulate instructions SMLAL, SMLAL2, UMLAL, UMLAL2, SMLSL, SMLSL2, UMLSL, UMLSL2, UMULL, UMULL2, SMULL, SMULL2 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-01-31target-arm: Move arm_rmode_to_sf to a shared location.Will Newton1-28/+0
This function will be needed for AArch32 ARMv8 support, so move it to helper.c where it can be used by both targets. Also moves the code out of line, but as it is quite a large function I don't believe this should be a significant performance impact. Signed-off-by: Will Newton <will.newton@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-31target-arm: A64: Add SIMD scalar copy instructionsPeter Maydell1-1/+42
Add support for the SIMD scalar copy instruction group (C3.6.7), which consists of the single instruction DUP (element, scalar). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-01-31target-arm: A64: Add SIMD modified immediate groupAlex Bennée1-1/+119
This patch adds support for the AdvSIMD modified immediate group (C3.6.6) with all its suboperations (movi, orr, fmov, mvni, bic). Signed-off-by: Alexander Graf <agraf@suse.de> [AJB: new decode struct, minor bug fixes, optimisation] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-01-31target-arm: A64: Add SIMD copy operationsAlex Bennée1-1/+209
This adds support for the all the AdvSIMD vector copy operations (ARM ARM 3.6.5). Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-01-31target-arm: A64: Add SIMD across-lanes instructionsMichael Matz1-1/+176
Add support for the SIMD "across lanes" instruction group (C3.6.4). Signed-off-by: Michael Matz <matz@suse.de> [PMM: Updated to current codebase, added fp min/max ops, added unallocated encoding checks] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-01-31target-arm: A64: Add SIMD ZIP/UZP/TRNMichael Matz1-1/+75
Add support for the SIMD ZIP/UZIP/TRN instruction group (C3.6.3). Signed-off-by: Michael Matz <matz@suse.de> [PMM: use new do_vec_get/set etc functions and generally update to new codebase standards; refactor to pull per-element loop outside switch] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2014-01-31target-arm: A64: Add SIMD TBL/TBLXMichael Matz1-1/+54
Add support for the SIMD TBL/TBLX instructions (group C3.6.2). Signed-off-by: Michael Matz <matz@suse.de> [PMM: rewritten to do more of the decode in translate-a64.c, and to do only one 64 bit pass at a time in the helper] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.1 (git 2.18.0) at 2024-05-15 08:32:00 +0000