| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A LDRD or STRD where rd is not an even number is UNPREDICTABLE.
We were letting this fall through, which is OK unless rd is 15,
in which case we would attempt to do a load_reg or store_reg
to a nonexistent r16 for the second half of the double-word.
Catch the odd-numbered-rd cases and UNDEF them instead.
To do this we rearrange the structure of the code a little
so we can put the UNDEF catches at the top before we've
allocated TCG temporaries.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1431348973-21315-1-git-send-email-peter.maydell@linaro.org
|
|
Add support for trapping WFI and WFE instructions to the proper EL when
SCTLR/SCR/HCR settings apply.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
[PMM: removed unnecessary tweaking of syn_wfx() prototype;
use raise_exception();
don't trap on WFE (and add comment explaining why not);
remove unnecessary ARM_FEATURE checks;
trap to EL3, not EL1, if in S-EL0 and SCTLR check fires]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Just NOP the WFI instruction if we have work to do.
This doesn't make much difference currently (though it does avoid
jumping out to the top level loop and immediately restarting),
but the distinction between "halt" and "don't halt" will become
more important when the decision to halt requires us to trap
to a higher exception level instead.
Suggested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Deleting the now-unused ARM_TBFLAG_CPACR_FPEN left a gap in the
bit usage; move the following ARM_TBFLAG_XSCALE_CPAR and
ARM_TBFLAG_NS_SHIFT down 3 bits to fill the gap.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Extend the ARM disassemble context to take a target exception EL instead of a
boolean enable. This change reverses the polarity of the check making a value
of 0 indicate floating point enabled (no exception).
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
[PMM: Use a common TB flag field for AArch32 and AArch64;
CPTR_EL2 exists in v7; CPTR_EL2 should trap for EL2 accesses;
CPTR_EL2 should not trap for secure accesses; CPTR_EL3
should trap for EL3 accesses; CPACR traps for secure
accesses should trap to EL3 if EL3 is AArch32]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Currently we keep the TB flags PSTATE_SS and SS_ACTIVE in different
bit positions for AArch64 and AArch32. Replace these separate
definitions with a single common flag in the upper part of the
flags word.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Adds CPTR_EL2/3 system registers definitions and access function.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
[PMM: merge CPTR_EL2 and HCPTR definitions into a single
def using STATE_BOTH;
don't use readfn/writefn to implement RAZ/WI registers;
don't use accessfn for the no-EL2 CPTR_EL2;
fix cpacr_access logic to catch EL2 accesses to CPACR being
trapped to EL3;
use new CP_ACCESS_TRAP_EL[23] rather than setting
exception.target_el directly]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Some coprocessor access functions will need to indicate that the
instruction should trap to EL2 or EL3 rather than the default
target exception level; add corresponding CPAccessResult enum
entries and handling code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Updated the interrupt handling to utilize and report through the target EL
exception field. This includes consolidating and cleaning up code where
needed. Target EL is now calculated once in arm_cpu_exec_interrupt() and
do_interrupt was updated to use the target_el exception field. The
necessary code from arm_excp_target_el() was merged in where needed and the
function removed.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1429722561-12651-4-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Rather than making every caller of raise_exception set the
syndrome and target EL by hand, make these arguments to
raise_exception() and have that do the job.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Set the exception target EL for MMU faults in tlb_fill.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Move the code which sets exception information out of
arm_cpu_handle_mmu_fault and into tlb_fill. tlb_fill
is the only caller which wants to raise_exception()
so it makes more sense for it to handle the whole of
the exception setup.
As part of this cleanup, move the user-mode-only
implementation function for the handle_mmu_fault CPU
method into cpu.c so we don't need to make it globally
visible, and rename the softmmu-only utility function
arm_cpu_handle_mmu_fault to arm_tlb_fill so it's clear
that it's not the same thing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
If the SCTLR.UMA trap bit is set then attempts by EL0 to update
the PSTATE DAIF bits via "MSR DAIFSet, imm" and "MSR DAIFClr, imm"
instructions will raise an exception. We were failing to set
the syndrome information for this exception, which meant that
it would be reported as a repeat of whatever the previous
exception was. Set the correct syndrome information.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Updated the various helper routines to set the target EL as needed using a
dedicated function.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1429722561-12651-3-git-send-email-greg.bellows@linaro.org
[PMM: Also set target_el in fault cases in access_check_cp_reg()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add a CPU state exception target EL field that will be used for communicating
the EL to which an exception should be routed.
Add a disassembly context field for tracking the EL3 architecture needed for
determining the target exception EL.
Add a target EL argument to the generic exception helper for callers to specify
the EL to which the exception should be routed. Extended the helper to set
the newly added CPU state exception target el.
Added a function for setting the target exception EL and updated calls to helpers
to call it.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1429722561-12651-2-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1431499963-1019-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1431499963-1019-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1431499963-1019-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Adds a utility function for creating a WFx exception syndrome
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1429722561-12651-9-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Updated get_phys_addr_lpae to check the appropriate TTBCR/TCR depending on the
current EL. Support includes using the different TCR format as well as checks to
insure TTBR1 is not used when in EL2 or EL3.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1429722561-12651-8-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add a utility function for choosing the correct TTBR system register based on
the specified MMU index. Add use of function on physical address lookup.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1429722561-12651-7-git-send-email-greg.bellows@linaro.org
[PMM: fixed regime_ttbr() return type to be uint64_t]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add the ARM Cortex-A53 processor definition. Similar to A57, but with
different L1 I cache policy, phys addr size and different cache
geometries. The cache sizes is implementation configurable, but use
these values (from Xilinx Zynq MPSoC) as a default until cache size
configurability is added.
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: db439ff834cf0431bc192b05272a3b28fe2045d0.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Rename some A57 CP register variables in preparation for support for
Cortex A53. Use "a57_a53" to describe the shareable features. Some of
the CP15 registers (such as ACTLR) are specific to implementation, but
we currently just RAZ them so continue with that as the policy for both
A57 and A53 processors under a shared definition.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5a5f957994677d91435190b3be1cefa6f657e274.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The extra information is not yet used but it is now available.
This requires minor changes through all of the tcg backends.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
- build bugfix from Fam and new configure check from Emilio
- two improvements to "info mtere" from Gerd
- KVM support for memory transaction attributes
- one more small step towards unlocked MMIO dispatch
- one piece of the qemu-nbd errno fixes
- trivial-ish patches from Denis and Thomas
# gpg: Signature made Fri May 8 13:47:29 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
qemu-nbd: only send a limited number of errno codes on the wire
rules.mak: Force CFLAGS for all objects in DSO
configure: require __thread support
exec: move rcu_read_lock/unlock to address_space_translate callers
kvm: add support for memory transaction attributes
mtree: also print disabled regions
mtree: tag & indent a bit better
apic_common: improve readability of apic_reset_common
kvm: Silence warning from valgrind
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Let kvm_arch_post_run convert fields in the kvm_run struct to MemTxAttrs.
These are then passed to address_space_rw.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
No code uses the cpu_pc_from_tb() function. Delete from tricore and
arm which each provide an unused implementation. Update the comment
in tcg.h to reflect that this is obsoleted by synchronize_from_tb.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
These CP accessor function prototypes are unused. Remove them.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Updated scr_write to always allow updates to the SCR.SMD bit on ARMv8
regardless of whether virtualization (EL2) is enabled or not.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Message-id: 1429888797-4378-1-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1429669112-29835-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Rename the field holding CPACR_EL1 system register state in AArch64
naming style.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
[PMM: also fixed a couple of missed occurrences in cpu.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Fix a TODO in bp_wp_matches() now that we have a function for
testing whether the CPU is currently in Secure mode or not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Now that we have memory access attribute information in the watchpoint
checking code, we can correctly implement handling of watchpoints
which should match only on userspace accesses, where LDRT/STRT/LDT/STT
from EL1 are treated as userspace accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Add a transaction attribute indicating that a memory access is being
done from user-mode (unprivileged). This corresponds to an equivalent
signal in ARM AMBA buses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Factor out the page table walk memory accesses into their own function,
so that we can specify the correct S/NS memory attributes for them.
This will also provide a place to use the correct endianness and
handle the need for a stage-2 translation when virtualization is
supported.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Honour the NS bit in ARM page tables:
* when adding entries to the TLB, include the Secure/NonSecure
transaction attribute
* set the NS bit in the PAR when doing ATS operations
Note that we don't yet correctly use the NSTable bit to
cause the page table walk itself to use the right attributes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
|
|
The current code was negatively indexing the cpu state array and not
synchronizing banked spsr register state with the current mode's spsr
state, causing occasional failures with migration.
Some munging is done to take care of the aarch64 mapping and also to
ensure the most current value of the spsr is updated to the banked
registers (relevant for KVM<->TCG migration).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
For migration to work we need to sync all of the register state. This is
especially noticeable when GCC starts using FP registers as spill
registers even with integer programs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This adds the saving and restore of the current Multi-Processing state
of the machine. While the KVM_GET/SET_MP_STATE API exposes a number of
potential states for x86 we only use two for ARM. Either the process is
running or not. We then save this state into the cpu_powered TCG state
to avoid changing the serialisation format.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The AArch64 SPSR_EL1 register is architecturally mandated to
be mapped to the AArch32 SPSR_svc register. This means its
state should live in QEMU's env->banked_spsr[1] field.
Correct the various places in the code that incorrectly
put it in banked_spsr[0].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
For the ARM M-profile cores, exception return pops various registers
including the PC from the stack. The architecture defines that if the
lowest bit in the new PC value is set (ie the PC is not halfword
aligned) then behaviour is UNPREDICTABLE. In practice hardware
implementations seem to simply ignore the low bit, and some buggy
RTOSes incorrectly rely on this. QEMU's behaviour was architecturally
permitted, but bringing QEMU into line with the hardware behaviour
allows more guest code to run. We log the situation as a guest error.
This was reported as LP:1428657.
Reported-by: Anders Esbensen <anders@lyes.dk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The A32 encoding of LDM distinguishes LDM (user) from LDM (exception
return) based on whether r15 is in the register list. However for
STM (user) there is no equivalent distinction. We were incorrectly
treating "r15 in list" as indicating exception return for both LDM
and STM, with the result that an STM (user) involving r15 went into
an infinite loop. Fix this; note that the value stored for r15
in this case is the current PC regardless of our current mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1426015125-5521-1-git-send-email-peter.maydell@linaro.org
|
|
This patch makes the following changes to the determination of
whether an address is executable, when translating addresses
using LPAE.
1. No longer assumes that PL0 can't execute when it can't read.
It can in AArch64, a difference from AArch32.
2. Use va_size == 64 to determine we're in AArch64, rather than
arm_feature(env, ARM_FEATURE_V8), which is insufficient.
3. Add additional XN determinants
- NS && is_secure && (SCR & SCR_SIF)
- WXN && (prot & PAGE_WRITE)
- AArch64: (prot_PL0 & PAGE_WRITE)
- AArch32: UWXN && (prot_PL0 & PAGE_WRITE)
- XN determination should also work in secure mode (untested)
- XN may even work in EL2 (currently impossible to test)
4. Cleans up the bloated PAGE_EXEC condition - by removing it.
The helper get_S1prot is introduced. It may even work in EL2,
when support for that comes, but, as the function name implies,
it only works for stage 1 translations.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1426099139-14463-4-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Introduce simple_ap_to_rw_prot(), which has the same behavior as
ap_to_rw_prot(), but takes the 2-bit simple AP[2:1] instead of
the 3-bit AP[2:0]. Use this in get_phys_addr_v6 when SCTLR_AFE
is set, as that bit indicates we should be using the simple AP
format.
It's unlikely this path is getting used. I don't see CR_AFE
getting used by Linux, so possibly not. If it had been, then
the check would have been wrong for all but AP[2:1] = 0b11.
Anyway, this should fix it up, in case it ever does get used.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1426099139-14463-3-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Instead of mixing access permission checking with access permissions
to page protection flags translation, just do the translation, and
leave it to the caller to check the protection flags against the access
type. Also rename to ap_to_rw_prot to better describe the new behavior.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1426099139-14463-2-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This is improved type checking for the translators -- it's no longer
possible to accidentally swap arguments to the branch functions.
Note that the code generating backends still manipulate labels as int.
With notable exceptions, the scope of the change is just a few lines
for each target, so it's not worth building extra machinery to do this
change in per-target increments.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
misc fixes and cleanups
A bunch of fixes all over the place, some of the
bugs fixed are actually regressions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed Mar 11 17:48:30 2015 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (25 commits)
virtio-scsi: remove empty wrapper for cmd
virtio-scsi: clean out duplicate cdb field
virtio-scsi: fix cdb/sense size
uapi/virtio_scsi: allow overriding CDB/SENSE size
virtio-scsi: drop duplicate CDB/SENSE SIZE
exec: don't include hw/boards for linux-user
acpi: specify format for build_append_namestring
MAINTAINERS: drop aliguori@amazon.com
tpm: Move memory subregion function into realize function
virtio-pci: Convert to realize()
pci: Convert pci_nic_init() to Error to avoid qdev_init()
machine: query mem-merge machine property
machine: query dump-guest-core machine property
hw/boards: make it safe to include for linux-user
machine: query phandle-start machine property
machine: query kvm-shadow-mem machine property
kvm: add machine state to kvm_arch_init
machine: query kernel-irqchip property
machine: allowed/required kernel-irqchip support
machine: replace qemu opts with iommu property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Needed to query machine's properties.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
'remotes/pmaydell/tags/pull-target-arm-20150311' into staging
target-arm queue:
* fix a bug in bitops.h
* implement SD card support on integratorcp
* add a missing 'compatible' property for Cortex-A57
* add Netduino 2 machine model
* fix command line parsing bug for CPU options with multiple CPUs
# gpg: Signature made Wed Mar 11 14:14:22 2015 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150311:
bitops.h: sextract64() return type should be int64_t, not uint64_t
integrator/cp: Implement CARDIN and WPROT signals
integrator/cp: Model CP control registers as sysbus device
target-arm: Add missing compatible property to A57
netduino2: Add the Netduino 2 Machine
stm32f205: Add the stm32f205 SoC
stm32f2xx_SYSCFG: Add the stm32f2xx SYSCFG
stm32f2xx_USART: Add the stm32f2xx USART Controller
stm32f2xx_timer: Add the stm32f2xx Timer
hw/arm/virt: fix cmdline parsing bug with CPU options and smp > 1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1424097799-11002-1-git-send-email-ozaki.ryota@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
