summaryrefslogtreecommitdiff
path: root/target-mips/op_helper.c
AgeCommit message (Collapse)AuthorFilesLines
2012-10-31target-mips: don't flush extra TLB on permissions upgradeAurelien Jarno1-5/+23
If the guest uses a TLBWI instruction for upgrading permissions, we don't need to flush the extra TLBs. This improve boot time performance by about 10%. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: fix TLBR wrt SEGMaskAurelien Jarno1-0/+6
Like r4k_map_address(), r4k_helper_tlbp() should use SEGMask to mask the address. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: implement unaligned loads using TCGAurelien Jarno1-142/+0
Load/store from helpers should be avoided as they are quite inefficient. Rewrite unaligned loads instructions using TCG and aligned loads. The number of actual loads operations to implement an unaligned load instruction is reduced from up to 8 to 1. Note: As we can't rely on shift by 32 or 64 undefined behaviour, the code loads already shift by one constants. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: simplify load/store microMIPS helpersAurelien Jarno1-64/+9
load/store microMIPS helpers are reinventing the wheel. Call do_lw, do_ll, do_sw and do_sl instead of using a macro calling the cpu_* load/store functions. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: restore CPU state after an FPU exceptionAurelien Jarno1-90/+95
Rework *raise_exception*() functions so that they can be called from other helpers, passing the return address as an argument. Use do_raise_exception() function in update_fcr31() to correctly restore the CPU state after an FPU exception. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: use softfloat constants when possibleAurelien Jarno1-48/+44
softfloat already has a few constants defined, use them instead of redefining them in target-mips. Rename FLOAT_SNAN32 and FLOAT_SNAN64 to FP_TO_INT32_OVERFLOW and FP_TO_INT64_OVERFLOW as even if they have the same value, they are technically different (and defined differently in the MIPS ISA). Remove the unused constants. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: cleanup float to int conversion helpersAurelien Jarno1-39/+79
Instead of accessing the flags from the floating point control register after updating it, read the softfloat flags. This is just code cleanup and should not change the behaviour. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: fix FPU exceptionsAurelien Jarno1-13/+19
For each FPU instruction that can trigger an FPU exception, to call call update_fcr31() after. Remove the manual NaN assignment in case of float to float operation, as softfloat is already taking care of that. However for float to int operation, the value has to be changed to the MIPS one. In the cvtpw_ps case, the two registers have to be handled separately to guarantee a correct final value in both registers. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: keep softfloat exception set to 0 between instructionsAurelien Jarno1-63/+10
Instead of clearing the softfloat exception flags before each floating point instruction, reset them to 0 in update_fcr31() when an exception is detected. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: use the softfloat floatXX_muladd functionsAurelien Jarno1-89/+48
Use the new softfloat floatXX_muladd() functions to implement the madd, msub, nmadd and nmsub instructions. At the same time replace the name of the helpers by the name of the instruction, as the only reason for the previous names was to keep the macros simple. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity1-3/+3
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-17target-mips: Pass MIPSCPU to mips_vpe_sleep()Andreas Färber1-3/+7
Needed for moving halted field to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-17target-mips: Pass MIPSCPU to mips_tc_sleep()Andreas Färber1-3/+5
Needed for changing mips_vpe_sleep() argument type to MIPSCPU. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-17target-mips: Pass MIPSCPU to mips_vpe_is_wfi()Andreas Färber1-4/+8
Needed for moving halted field to CPUState. The variable name "c" is retained for MIPSCPU to leave "cpu" for CPUState. Also change return type to bool while at it. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-17target-mips: Pass MIPSCPU to mips_tc_wake()Andreas Färber1-3/+8
Needed for changing mips_vpe_is_wfi() argument type to MIPSCPU. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-17target-mips: Clean up other_cpu in helper_{d,e}vpe()Andreas Färber1-14/+14
Free the variable name "other_cpu" for later use for MIPSCPU. Fix off-by-one indentation while at it. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-15target-mips: switch to AREG0 free modeBlue Swirl1-505/+560
Add an explicit CPUState parameter instead of relying on AREG0 and switch to AREG0 free mode. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Acked-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-08MIPS/user: Fix reset CPU state initializationMaciej W. Rozycki1-49/+0
This change updates the CPU reset sequence to use a common piece of code that figures out CPU state flags, fixing the problem with MIPS_HFLAG_COP1X not being set where applicable that causes floating-point MADD family instructions (and other instructions from the MIPS IV FP subset) to trap. As compute_hflags is now shared between op_helper.c and translate.c, the function is now moved to a common header. There are no changes to this function. The problem was seen with the 24Kf MIPS32r2 processor in user emulation. The new approach prevents system and user emulation from diverging -- all the hflags state is initialized in one place now. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-08-24target-mips: Fix some helper functions (VR54xx multiplication)Stefan Weil1-46/+29
Commits b5dc7732e1cc2fb549e48b7b5d664f2c79628e2e and be24bb4f3007c3e07cbf1934f7e781493d876ab7 optimized the code and removed the correct setting of t0. Fix this. gcc-4.7 detected this bug because parameter arg1 was unused but set in set_HIT0_LO and set_HI_LOT0. Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-05-03target-mips: Remove unused inline functionStefan Weil1-6/+0
Function set_HILO is not needed anywhere. Signed-off-by: Stefan Weil <sw@weilnetz.de>
2012-04-15target-mips: Fix type cast for w64 (uintptr_t)Stefan Weil1-1/+1
This changes nothing for other hosts. Signed-off-by: Stefan Weil <sw@weilnetz.de>
2012-04-14Use uintptr_t for various op related functionsBlue Swirl1-10/+8
Use uintptr_t instead of void * or unsigned long in several op related functions, env->mem_io_pc and GETPC() macro. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-24target-mips: Add compiler attribute to some functions which don't returnStefan Weil1-1/+2
helper_raise_exception_err does not return, nor do helper_raise_exception and do_unaligned_access. Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-14target-mips: Don't overuse CPUStateAndreas Färber1-62/+62
Scripted conversion: sed -i "s/CPUState/CPUMIPSState/g" target-mips/*.[hc] sed -i "s/#define CPUMIPSState/#define CPUState/" target-mips/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-08Spelling fixes in comments (it's -> its)Stefan Weil1-1/+1
* it's -> its (fixed for all files) * dont -> don't (only fixed in a line which was touched by the previous fix) * distrub -> disturb (fixed in the same line) Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-01softmmu_header: pass CPUState to tlb_fillBlue Swirl1-4/+3
Pass CPUState pointer to tlb_fill() instead of architecture local cpu_single_env hacks. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-06mips: Add MT halting and waking of VPEsEdgar E. Iglesias1-4/+78
+ some partial support for TC's. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Correct IntCtl write mask for VIntEdgar E. Iglesias1-1/+1
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Hook in more reg accesses via mttr/mftrEdgar E. Iglesias1-11/+129
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Synchronize CP0 TCSTatus, Status and EntryHiEdgar E. Iglesias1-44/+106
These registers share some of their fields. Writes to these fields should be visible through the corresponding mirror fields. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Handle TC indexing of other VPEsEdgar E. Iglesias1-105/+161
Introduce mips_cpu_map_tc() to map a global TC index into a VPE nr and local tc index. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-08-07Remove unused is_softmmu parameter from cpu_handle_mmu_faultBlue Swirl1-1/+1
Parameter is_softmmu (and its evil mutant twin brother is_softmuu) is not used in cpu_*_handle_mmu_fault() functions, remove them and adjust callers. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30exec.h cleanupBlue Swirl1-1/+55
Move softmmu_exec.h include directives from target-*/exec.h to target-*/op_helper.c. Move also various other stuff only used in op_helper.c there. Define global env in dyngen-exec.h. For i386, move wrappers for segment and FPU helpers from user-exec.c to op_helper.c. Implement raise_exception_err_env() to handle dynamic CPUState. Move the function declarations to cpu.h since they can be used outside of op_helper.c context. LM32, s390x, UniCore32: remove unused cpu_halted(), regs_to_env() and env_to_regs(). ARM: make raise_exception() static. Convert #include "exec.h" to #include "cpu.h" #include "dyngen-exec.h" and remove now unused target-*/exec.h. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20Fix unassigned memory access handlingBlue Swirl1-2/+4
cea5f9a28faa528b6b1b117c9ab2d8828f473fef exposed bugs in unassigned memory access handling. Fix them by always passing CPUState to the handlers. Reported-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26cpu_loop_exit: avoid using AREG0Blue Swirl1-2/+2
Make cpu_loop_exit() take a parameter for CPUState instead of relying on global env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-20Remove unused function parameter from cpu_restore_stateStefan Weil1-2/+2
The previous patch removed the need for parameter puc. Is is now unused, so remove it. Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <weil@mail.berlios.de>
2011-04-17target-mips: clear softfpu exception state for comparison instructionsAurelien Jarno1-16/+25
MIPS FPU instructions should start with a clean softfpu status. This is done for the most instructions, but not for comparison ones. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17target-mips: fix c.ps.* instructionsAurelien Jarno1-4/+4
Contrary to cabs.ps.* instructions, c.ps.* should not compare the absolute value of the operand, but directly the operands. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17target-mips: don't hardcode softfloat exception bitsAurelien Jarno1-15/+20
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17target-mips: simplify FP comparisonsAurelien Jarno1-36/+36
As the softfloat comparison functions already test for NaN, there is no need to always call the float*_unordered*() functions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17softfloat: rename float*_eq() into float*_eq_quiet()Aurelien Jarno1-16/+16
float*_eq functions have a different semantics than other comparison functions. Fix that by first renaming float*_quiet() into float*_eq_quiet(). Note that it is purely mechanical, and the behaviour should be unchanged. That said it clearly highlight problems due to this different semantics, they are fixed later in this patch series. Cc: Alexander Graf <agraf@suse.de> Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17target-mips: use new float*_unordered*() functionsAurelien Jarno1-98/+70
Use the new float*_unordered*() functions from softfloat instead of redefining a private version. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-09[PATCH] [MIPS] Clear softfpu exception state for round, trunc, ceil and floorChris Dearman1-0/+16
MIPS FPU instructions should start with a clean softfpu status. This is done for the arithmetic operations and cvt instructions, but not for round, trunc, ceil and floor. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-02softfloat: Rename float*_is_nan() functions to float*_is_quiet_nan()Peter Maydell1-4/+4
The softfloat functions float*_is_nan() were badly misnamed, because they return true only for quiet NaNs, not for all NaNs. Rename them to float*_is_quiet_nan() to more accurately reflect what they do. This change was produced by: perl -p -i -e 's/_is_nan/_is_quiet_nan/g' $(git grep -l is_nan) (with the results manually checked.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Nathan Froyd <froydnj@codesourcery.com> Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-12-22target-mips: fix translation of MT instructionsNathan Froyd1-20/+8
The translation of dmt/emt/dvpe/evpe was doing the moral equivalent of: int x; ... /* no initialization of x */ x = f (x); which confused later bits of TCG rather badly, leading to crashes. Fix the helpers to only return results (those instructions have no inputs), and fix the translation code accordingly. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-09-18MIPS: fix yield handlingBlue Swirl1-1/+3
The parameter for yield should be handled as a signed integer for the comparisons to have any effect. This also avoids a gcc warning with -Wtype-limits. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-31Correctly identify multiple cpus in SMP systemsHervé Poussineau1-2/+1
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-25mips: more fixes to the MIPS interrupt glue logicAurelien Jarno1-12/+8
Commit 36388314febad3d7675ab919287f03733a560ff6 moved most of the interrupt logic to cpu-exec.c. Remove the remaining useless code and fix software interrupts. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: Edgar E. Iglesias <edgar@axis.com> Tested-by: Edgar E. Iglesias <edgar@axis.com>
2010-07-24mips: Correct MIPS interrupt glue logic for icountEdgar E. Iglesias1-11/+0
When hw interrupt pending bits in CP0_Cause are set, the CPU should see the hw interrupt line as active. The CPU may or may not take the interrupt based on internal state (global irq mask etc) but the glue logic shouldn't care. This fixes MIPS external hw interrupts in combination with -icount. Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
2010-07-03remove unused stuff from */exec.hPaolo Bonzini1-1/+6
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-28 16:39:39 +0000