summaryrefslogtreecommitdiff
path: root/target-mips/translate.c
AgeCommit message (Collapse)AuthorFilesLines
2013-03-12cpu: Move halted and interrupt_request fields to CPUStateAndreas Färber1-2/+2
Both fields are used in VMState, thus need to be moved together. Explicitly zero them on reset since they were located before breakpoints. Pass PowerPCCPU to kvmppc_handle_halt(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-05mips64-linux-user: Enable 64-bit address mode and fpuRichard Henderson1-0/+12
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05target-mips: Fix accumulator selection for MIPS16 and microMIPSRichard Sandiford1-84/+64
Add accumulator arguments to gen_HILO and gen_muldiv, rather than extracting the accumulator directly from ctx->opcode. The extraction was only right for the standard encoding: MIPS16 doesn't have access to the DSP registers, while microMIPS encodes the accumulator register in a different field (bits 14 and 15). Passing the accumulator register is probably an over-generalisation for division and 64-bit multiplication, which never access anything other than HI and LO, and which always pass 0 as the new argument. Separating them felt a bit fussy though. Signed-off-by: Richard Sandiford <rdsandiford@googlemail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-03gen-icount.h: Rename gen_icount_start/end to gen_tb_start/endPeter Maydell1-2/+2
The gen_icount_start/end functions are now somewhat misnamed since they are useful for generic "start/end of TB" code, used for more than just icount. Rename them to gen_tb_start/end. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-mips: Use mul[us]2 in [D]MULT[U] insnsRichard Henderson1-28/+20
Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16target-mips: Move TCG initialization to MIPSCPU initfnAndreas Färber1-2/+1
Make mips_tcg_init() non-static and add tcg_enabled() check to suppress it for qtest. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16target-mips: Introduce QOM realizefn for MIPSCPUAndreas Färber1-2/+3
Introduce a realizefn and set realized = true from cpu_mips_init(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-31target-mips: enable access to DSP ASE if implementedPetar Jovanovic1-4/+2
compute_hflags() will reset DSP h-flags, so MX bit should be initially set for usermode in cpu_state_reset() if DSP ASE is implemented. This change will bring back user-mode support for DSP ASE, since one of the recent changes broke it. Signed-off-by: Petar Jovanovic <petarj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-31target-mips: Sign-extend the result of LWRRichard Sandiford1-0/+1
Sign-extend the result of LWR, as is already done for LWL. This is necessary in the case where LWR loads the full word (i.e. the address is actually aligned). In the other cases, it is implementation defined whether the upper 32 bits of the result are unchanged or a copy of bit 31. The latter seems easier to implement. Previously the code used: (oldval & (0xfffffffe << (31 - bitshift))) | (newval >> bitshift) which zeroed the upper bits of the register, losing any previous sign extension in the unaligned cases. Signed-off-by: Richard Sandiford <rdsandiford@googlemail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-31target-mips: Fix signedness of loads in MIPS16 RESTOREsRichard Sandiford1-1/+1
Make RESTORE use sign-extending rather than zero-extending loads. Signed-off-by: Richard Sandiford <rdsandiford@googlemail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-31target-mips: implement DSP (d)append sub-class with TCGAurelien Jarno1-46/+87
DSP instruction from the (d)append sub-class can be implemented with TCG. Use a different function for these instructions are they are quite different from compare-pick sub-class. Fix BALIGN instruction for negative value, where the value should be zero-extended before being shift to the right. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-31target-mips: generate a reserved instruction exception on CPU without DSPAurelien Jarno1-2/+10
On CPU without DSP ASE support, a reserved instruction exception (instead of a DSP ASE sate disabled) should be generated. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-31target-mips: copy insn_flags in DisasContextAurelien Jarno1-381/+381
Copy insn_flags in DisasContext to avoid passing a CPUMIPSState pointer to subroutines, as suggested by Richard Henderson. Change subroutines to use this new field and remove the first argument. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-31target-mips: fix DSP loads with rd = 0Aurelien Jarno1-5/+0
When rd is 0, which still need to do the actually load to possibly generate a TLB exception. Reviewed-by: Eric Johnson <ericj@mips.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-15cpu: Move cpu_index field to CPUStateAndreas Färber1-10/+7
Note that target-alpha accesses this field from TCG, now using a negative offset. Therefore the field is placed last in CPUState. Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change. Move common parts of mips cpu_state_reset() to mips_cpu_reset(). Acked-by: Richard Henderson <rth@twiddle.net> (for alpha) [AF: Rebased onto ppc CPU subclasses and openpic changes] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-01target-mips: Make repl_ph to sign extend to target-longJovanovic, Petar1-1/+2
The immediate value is 9bits, should sign-extend to 16bits. The return value to register should sign-extend to target_long, as Richard says, removing an unnecessary cast works fun. Signed-off-by: Dongxue Zhang <elta.era@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-12-19exec: move include files to include/exec/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19build: kill libdis, move disassemblers to disas/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-08TCG: Use gen_opc_instr_start from context instead of global variable.Evgeny Voevodin1-3/+3
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_icount from context instead of global variable.Evgeny Voevodin1-1/+1
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_pc from context instead of global variable.Evgeny Voevodin1-2/+2
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-24target-mips: remove POOL48A from the microMIPS decodingAurelien Jarno1-1/+0
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-24target-mips: Clean up microMIPS32 major opcode陳韋任 (Wei-Ren Chen)1-7/+17
I check MIPS microMIPS manual [1], and found the major opcode might be wrong. I add a comment to explicitly indicate what manual I am refering to, and according that manual I remove microMIPS32 major opcodes 0x1f. As for others, like 0x16, 0x17, 0x36 and 0x37, they are for higher-order MIPS ISA level or new revision of this microMIPS architecture. Quote from Johnson, they are belong MIPS64 [2]. [1] http://www.mips.com/products/architectures/micromips/#specifications MIPS Architecture for Programmers Volume II-B: The microMIPS32 Instruction Set (Revision 3.05) MD00582-2B-microMIPS-AFP-03.05.pdf [2] http://www.mips.com/products/architectures/mips64/ MIPS Architecture For Programmers Volume II-A: The MIPS64 Instruction Set MD00087-2B-MIPS64BIS-AFP-03.51.pdf Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw> Reviewed-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-24target-mips: Add comments on POOL32Axf encoding陳韋任 (Wei-Ren Chen)1-0/+17
Current QEMU MIPS POOL32AXF encoding comes from microMIPS32 and microMIPS32 DSP. Add comment here to help reading. Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw> Reviewed-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-17TCG: Use gen_opc_buf from context instead of global variable.Evgeny Voevodin1-3/+3
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17TCG: Use gen_opc_ptr from context instead of global variable.Evgeny Voevodin1-4/+5
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-15target-mips: fix wrong microMIPS opcode encoding陳韋任 (Wei-Ren Chen)1-1/+1
While reading microMIPS decoding, I found a possible wrong opcode encoding. According to [1] page 166, the bits 13..12 for MULTU is 0x01 rather than 0x00. Please review, thanks. [1] MIPS Architecture for Programmers VolumeIV-e: The MIPS DSP Application-Specific Extension to the microMIPS32 Architecture Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-11target-mips: Fix seg fault for LUI when MIPS_DEBUG_DISAS==1.Eric Johnson1-7/+11
The call to gen_logic_imm for OPC_LUI passes -1 for rs. This causes the MIPS_DEBUG statement to seg fault due to the deference of regnames[rs]. This patch fixes that. Signed-off-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> (aurel32: replaced static string formating by a static string)
2012-11-10disas: avoid using cpu_single_envBlue Swirl1-1/+1
Pass around CPUArchState instead of using global cpu_single_env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Acked-by: Richard Henderson <rth@twiddle.net> Acked-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2012-10-31target-mips: use deposit instead of hardcoded versionAurelien Jarno1-28/+4
Use the deposit op instead of and hardcoded bit field insertion. It allows the host to emit the corresponding instruction if available. At the same time remove the (lsb > msb) test. The MIPS64R2 instruction set manual says "Because of the instruction format, lsb can never be greater than msb, so there is no UNPREDICATABLE case for this instruction." (Bug reported as LP:1071149.) Cc: Никита Канунников <n.kanunnikov@sbtcom.ru> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: optimize ddiv/ddivu/div/divu with movcondAurelien Jarno1-48/+37
The result of a division by 0, or a division of INT_MIN by -1 in the signed case, is unpredictable. Just replace 0 by 1 in that case so that it doesn't trigger a floating point exception on the host. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: implement movn/movz using movcondAurelien Jarno1-15/+12
Avoid the branches in movn/movz implementation and replace them with movcond. Also update a wrong command. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: don't use local temps for store conditionalAurelien Jarno1-5/+6
Store conditional operations only need local temps in user mode. Fix the code to use temp local only in user mode, this spares two memory stores in system mode. At the same time remove a wrong a wrong copied & pasted comment, store operations don't have a register destination. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: implement unaligned loads using TCGAurelien Jarno1-13/+62
Load/store from helpers should be avoided as they are quite inefficient. Rewrite unaligned loads instructions using TCG and aligned loads. The number of actual loads operations to implement an unaligned load instruction is reduced from up to 8 to 1. Note: As we can't rely on shift by 32 or 64 undefined behaviour, the code loads already shift by one constants. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: optimize load operationsAurelien Jarno1-4/+12
Only allocate t1 when needed. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: cleanup load/store operationsAurelien Jarno1-64/+35
Load/store operations use macros for historical reasons. Now that there is no point in keeping them, replace them by direct calls to qemu_ld/st. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: use the softfloat floatXX_muladd functionsAurelien Jarno1-12/+12
Use the new softfloat floatXX_muladd() functions to implement the madd, msub, nmadd and nmsub instructions. At the same time replace the name of the helpers by the name of the instruction, as the only reason for the previous names was to keep the macros simple. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: do not save CPU state when using retranslationAurelien Jarno1-20/+0
When the CPU state after a possible retranslation is going to be handled through code retranslation, we don't need to save the CPU state before. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: correctly restore btarget upon exceptionAurelien Jarno1-0/+11
When the CPU state is restored through retranslation after an exception, btarget should also be restored. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: remove #if defined(TARGET_MIPS64) in opcode enumsAurelien Jarno1-36/+0
All switch() decoding instruction have a default entry, so it is possible to have unused enum entries. Remove conditional definitions of MIPS64 opcode enums, as it only makes the code less readable. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP accumulator instructionsJia Liu1-0/+351
Add MIPS ASE DSP Accumulator and DSPControl Access instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP compare-pick instructionsJia Liu1-0/+350
Add MIPS ASE DSP Compare-Pick instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP bit/manipulation instructionsJia Liu1-0/+249
Add MIPS ASE DSP Bit/Manipulation instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP multiply instructionsJia Liu1-0/+485
Add MIPS ASE DSP Multiply instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP GPR-based shift instructionsJia Liu1-0/+324
Add MIPS ASE DSP GPR-Based Shift instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP arithmetic instructionsJia Liu1-3/+792
Add MIPS ASE DSP Arithmetic instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP load instructionsJia Liu1-0/+88
Add MIPS ASE DSP Load instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP branch instructionsJia Liu1-0/+36
Add MIPS ASE DSP Branch instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31Use correct acc value to index cpu_HI/cpu_LO rather than using a fix numberJia Liu1-27/+95
Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP resources access checkJia Liu1-0/+23
Add MIPS ASE DSP resources access check. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-26 12:25:40 +0000