summaryrefslogtreecommitdiff
path: root/target-mips/translate.c
AgeCommit message (Collapse)AuthorFilesLines
2014-07-28target-mips/translate.c: Free TCG in OPC_DINSVDongxue Zhang1-0/+3
Free t0 and t1 in opcode OPC_DINSV. Signed-off-by: Dongxue Zhang <elta.era@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2014-07-05mips/kvm: Init EBase to correct KSEG0James Hogan1-1/+7
The EBase CP0 register is initialised to 0x80000000, however with KVM the guest's KSEG0 is at 0x40000000. The incorrect value doesn't get passed to KVM yet as KVM doesn't implement the EBase register, however we should set it correctly now so as not to break migration/loadvm to a future version of QEMU that does support EBase. Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-20target-mips: copy CP0_Config1 into DisasContextAurelien Jarno1-9/+11
In order to avoid access to the CPUMIPSState structure in the translator, keep a copy of CP0_Config1 into DisasContext. The whole register is read-only so it can be copied as a single value. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2014-06-20Merge remote-tracking branch 'remotes/kvm/uq/master' into stagingPeter Maydell1-0/+2
* remotes/kvm/uq/master: hw/mips: malta: Don't boot from flash with KVM T&E MAINTAINERS: Add entry for MIPS KVM target-mips: Enable KVM support in build system hw/mips: malta: Add KVM support hw/mips: In KVM mode, inject IRQ2 (I/O) interrupts via ioctls target-mips: Call kvm_mips_reset_vcpu() from mips_cpu_reset() target-mips: kvm: Add main KVM support for MIPS kvm: Allow arch to set sigmask length target-mips: get_physical_address: Add KVM awareness target-mips: get_physical_address: Add defines for segment bases hw/mips: Add API to convert KVM guest KSEG0 <-> GPA hw/mips/cputimer: Don't start periodic timer in KVM mode target-mips: Reset CPU timer consistently KVM: Fix GSI number space limit Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-18target-mips: implement UserLocal RegisterPetar Jovanovic1-3/+52
From MIPS documentation (Volume III): UserLocal Register (CP0 Register 4, Select 2) Compliance Level: Recommended. The UserLocal register is a read-write register that is not interpreted by the hardware and conditionally readable via the RDHWR instruction. This register only exists if the Config3-ULRI register field is set. Privileged software may write this register with arbitrary information and make it accessible to unprivileged software via register 29 (ULR) of the RDHWR instruction. To do so, bit 29 of the HWREna register must be set to a 1 to enable unprivileged access to the register. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2014-06-18target-mips: Reset CPU timer consistentlyJames Hogan1-0/+2
The MIPS CPU timer (CP0 Count/Compare registers & QEMU timer) is reset at machine initialisation, including starting the timeout. Both registers however are placed before mvp in CPUMIPSState so they will both be zeroed on reset by the memset in mips_cpu_reset() including soon after init. This doesn't take into account that the timer may be running, in which case env->CP0_Count will represent the delta against the VM clock and the timeout will need updating. At init time (cpu_mips_clock_init()), lets only create the timer. Setting Count = 1 and starting the timer (cpu_mips_store_count()) can be done at reset time from cpu_state_reset(), which is after the memset. There is also no need to set CP0_Compare = 0 as that is already handled by the memset. Note that a reset occurs from mips_cpu_realizefn() which is before the machine init callback has had a chance to set up the CPU interrupts and the CPU timer, so env->timer will be NULL. This case is handled explicitly in cpu_mips_store_count(), treating the timer as disabled (which will also be the right thing to do when KVM support is added). Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05softmmu: introduce cpu_ldst.hPaolo Bonzini1-0/+1
This will collect all load and store helpers soon. For now it is just a replacement for softmmu_exec.h, which this patch stops including directly, but we also include it where this will be necessary in order to simplify the next patch. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-28tcg: Invert the inclusion of helper.hRichard Henderson1-3/+2
Rather than include helper.h with N values of GEN_HELPER, include a secondary file that sets up the macros to include helper.h. This minimizes the files that must be rebuilt when changing the macros for file N. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-03-25target-mips: fix MTHC1 and MFHC1 when FPU in FR=0 modePetar Jovanovic1-35/+44
Previous implementation presumed that FPU registers are 64-bit and are working in 64-bit mode. This change first checks MIPS_HFLAG_F64 and if not set, it does load/store from the odd numbered register pair. Patch by Matthew Fortune. Signed-off-by: Matthew Fortune <matthew.fortune@imgtec.com> Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2014-03-13cpu: Move breakpoints field from CPU_COMMON to CPUStateAndreas Färber1-2/+2
Most targets were using offsetof(CPUFooState, breakpoints) to determine how much of CPUFooState to clear on reset. Use the next field after CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise. Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Move exception_index field from CPU_COMMON to CPUStateAndreas Färber1-3/+1
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-10target-mips: add user-mode FR switch support for MIPS32r5Petar Jovanovic1-2/+12
Description of UFR feature: Required in MIPS32r5 if floating point is implemented and user-mode FR switching is supported. The UFR register allows user-mode to clear StatusFR by executing a CTC1 to UFR with GPR[0] as input, and read StatusFR by executing a CFC1 to UFR. helper_ctc1 has been extended with an additional parameter rt to check requirements for UFR feature. Definition of mips32r5-generic has been modified to include support for UFR. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
2014-02-10target-mips: add support for CP0_Config5Petar Jovanovic1-2/+12
Add CP0_Config5, define rw_bitmask and enable modifications. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
2014-02-10target-mips: add support for CP0_Config4Petar Jovanovic1-2/+13
Add CP0_Config4, define rw_bitmask. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
2013-12-21target-mips: Use new qemu_ld/st opcodesAurelien Jarno1-67/+52
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-12-09target-mips: fix 64-bit FPU config for user-mode emulationPetar Jovanovic1-2/+5
FR bit should be initialized to 1 for MIPS64, under condition that this bit is writable and that CPU has an FPU unit. It should be initialized to zero for MIPS32. This fixes different MIPS32 issues with FPU instructions whose behaviour defaulted to 64-bit FPU mode. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-10-11Merge remote-tracking branch 'rth/tcg-pull' into stagingAnthony Liguori1-4/+0
# By Richard Henderson # Via Richard Henderson * rth/tcg-pull: exec: Add both big- and little-endian memory helpers tcg: Add qemu_ld_st_i32/64 tcg: Add TCGMemOp configure: Remove CONFIG_QEMU_LDST_OPTIMIZATION tcg: Add tcg-be-ldst.h tcg: Add tcg-be-null.h exec: Delete is_tcg_gen_code and GETRA_EXT tcg-aarch64: Update to helper_ret_*_mmu routines tcg: Merge tcg_register_helper into tcg_context_init tcg: Add tcg-runtime.c helpers to all_helpers tcg: Put target helper data into an array. tcg: Remove stray semi-colons from target-*/helper.h tcg: Move helper registration into tcg_context_init target-m68k: Rename helpers.h to helper.h tcg: Use a GHashTable for tcg_find_helper tcg: Delete tcg_helper_get_name declaration tcg-hppa: Remove tcg backend Message-id: 1381440525-6666-1-git-send-email-rth@twiddle.net Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-10-10tcg: Move helper registration into tcg_context_initRichard Henderson1-4/+0
No longer needs to be done on a per-target basis. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-07cpu: Drop cpu_model_str from CPU_COMMONAndreas Färber1-1/+0
Since this is only read in cpu_copy() and linux-user has a global cpu_model, drop the field from generic code. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-09-02tcg: Change tcg_gen_exit_tb argument to uintptr_tRichard Henderson1-1/+1
And update all users. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-08-06target-mips: fix decoding of microMIPS POOL32Axf instructionsLeon Alrae1-6/+54
Fix incorrect assumption that DSP and non-DSP versions of the following instructions have the same encoding: MULT, MULTU, MADD, MADDU, MSUB, MSUBU, MFHI, MFLO, MTHI, MTLO. Correct the existing (non-DSP) instructions and add DSP equivalents. Reference: MIPS Architecture for Programmers Volume II-B: The microMIPS32 Instruction Set MIPS Architecture for Programmers Volume IV-e: The MIPS DSP Module for the microMIPS32 Architecture Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-28target-mips: fix branch in likely delay slot tcg assertJames Hogan1-45/+17
When a branch delay slot contains another branch instruction, the code generated raises an exception, however since is_branch==1, handle_delay_slot() doesn't get called immediately. This means ctx->bstate isn't set to BS_BRANCH, and the decoder continues decoding until a non-branch instruction is found. If the first branch was a branch likely instruction then each instruction after it generates code for the unlikely case, to go to the next tb starting after the delay slot. This results in multiple goto_tb tcg ops being generated with the same exit number. When debug is enabled this hits: tcg-op.h:2589: tcg_gen_goto_tb: Assertion `(tcg_ctx.goto_tb_issue_mask & (1 << idx)) == 0' failed. This is fixed by removing is_branch entirely, and calling handle_delay_slot() if (ctx.hflags & MIPS_HFLAG_BMASK) was set prior to the current instruction being decoded. This still prevents handle_delay_slot() being called immediately after a branch but allows it to still be called after a branch within a delay slot. Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-23cpu: Move singlestep_enabled field from CPU_COMMON to CPUStateAndreas Färber1-4/+7
Prepares for changing cpu_single_step() argument to CPUState. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09target-mips: Change gen_intermediate_code_internal() argument to MIPSCPUAndreas Färber1-4/+5
Also use bool type while at it. Prepares for moving singlestep_enabled field to CPUState. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28cpu: Turn cpu_dump_{state,statistics}() into CPUState hooksAndreas Färber1-2/+4
Make cpustats monitor command available unconditionally. Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec() arguments to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-08target-mips: add missing check_dspr2 for multiply instructionsPetar Jovanovic1-0/+1
The emulator needs to check in hflags if DSP unit has been turned off before it generates code for MUL_PH, MUL_S_PH, MULQ_S_W, and MULQ_RS_W. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-12cpu: Move halted and interrupt_request fields to CPUStateAndreas Färber1-2/+2
Both fields are used in VMState, thus need to be moved together. Explicitly zero them on reset since they were located before breakpoints. Pass PowerPCCPU to kvmppc_handle_halt(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-05mips64-linux-user: Enable 64-bit address mode and fpuRichard Henderson1-0/+12
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05target-mips: Fix accumulator selection for MIPS16 and microMIPSRichard Sandiford1-84/+64
Add accumulator arguments to gen_HILO and gen_muldiv, rather than extracting the accumulator directly from ctx->opcode. The extraction was only right for the standard encoding: MIPS16 doesn't have access to the DSP registers, while microMIPS encodes the accumulator register in a different field (bits 14 and 15). Passing the accumulator register is probably an over-generalisation for division and 64-bit multiplication, which never access anything other than HI and LO, and which always pass 0 as the new argument. Separating them felt a bit fussy though. Signed-off-by: Richard Sandiford <rdsandiford@googlemail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-03gen-icount.h: Rename gen_icount_start/end to gen_tb_start/endPeter Maydell1-2/+2
The gen_icount_start/end functions are now somewhat misnamed since they are useful for generic "start/end of TB" code, used for more than just icount. Rename them to gen_tb_start/end. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-mips: Use mul[us]2 in [D]MULT[U] insnsRichard Henderson1-28/+20
Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16target-mips: Move TCG initialization to MIPSCPU initfnAndreas Färber1-2/+1
Make mips_tcg_init() non-static and add tcg_enabled() check to suppress it for qtest. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16target-mips: Introduce QOM realizefn for MIPSCPUAndreas Färber1-2/+3
Introduce a realizefn and set realized = true from cpu_mips_init(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-31target-mips: enable access to DSP ASE if implementedPetar Jovanovic1-4/+2
compute_hflags() will reset DSP h-flags, so MX bit should be initially set for usermode in cpu_state_reset() if DSP ASE is implemented. This change will bring back user-mode support for DSP ASE, since one of the recent changes broke it. Signed-off-by: Petar Jovanovic <petarj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-31target-mips: Sign-extend the result of LWRRichard Sandiford1-0/+1
Sign-extend the result of LWR, as is already done for LWL. This is necessary in the case where LWR loads the full word (i.e. the address is actually aligned). In the other cases, it is implementation defined whether the upper 32 bits of the result are unchanged or a copy of bit 31. The latter seems easier to implement. Previously the code used: (oldval & (0xfffffffe << (31 - bitshift))) | (newval >> bitshift) which zeroed the upper bits of the register, losing any previous sign extension in the unaligned cases. Signed-off-by: Richard Sandiford <rdsandiford@googlemail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-31target-mips: Fix signedness of loads in MIPS16 RESTOREsRichard Sandiford1-1/+1
Make RESTORE use sign-extending rather than zero-extending loads. Signed-off-by: Richard Sandiford <rdsandiford@googlemail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-31target-mips: implement DSP (d)append sub-class with TCGAurelien Jarno1-46/+87
DSP instruction from the (d)append sub-class can be implemented with TCG. Use a different function for these instructions are they are quite different from compare-pick sub-class. Fix BALIGN instruction for negative value, where the value should be zero-extended before being shift to the right. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-31target-mips: generate a reserved instruction exception on CPU without DSPAurelien Jarno1-2/+10
On CPU without DSP ASE support, a reserved instruction exception (instead of a DSP ASE sate disabled) should be generated. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-31target-mips: copy insn_flags in DisasContextAurelien Jarno1-381/+381
Copy insn_flags in DisasContext to avoid passing a CPUMIPSState pointer to subroutines, as suggested by Richard Henderson. Change subroutines to use this new field and remove the first argument. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-31target-mips: fix DSP loads with rd = 0Aurelien Jarno1-5/+0
When rd is 0, which still need to do the actually load to possibly generate a TLB exception. Reviewed-by: Eric Johnson <ericj@mips.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-15cpu: Move cpu_index field to CPUStateAndreas Färber1-10/+7
Note that target-alpha accesses this field from TCG, now using a negative offset. Therefore the field is placed last in CPUState. Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change. Move common parts of mips cpu_state_reset() to mips_cpu_reset(). Acked-by: Richard Henderson <rth@twiddle.net> (for alpha) [AF: Rebased onto ppc CPU subclasses and openpic changes] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-01target-mips: Make repl_ph to sign extend to target-longJovanovic, Petar1-1/+2
The immediate value is 9bits, should sign-extend to 16bits. The return value to register should sign-extend to target_long, as Richard says, removing an unnecessary cast works fun. Signed-off-by: Dongxue Zhang <elta.era@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-12-19exec: move include files to include/exec/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19build: kill libdis, move disassemblers to disas/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-08TCG: Use gen_opc_instr_start from context instead of global variable.Evgeny Voevodin1-3/+3
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_icount from context instead of global variable.Evgeny Voevodin1-1/+1
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_pc from context instead of global variable.Evgeny Voevodin1-2/+2
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-24target-mips: remove POOL48A from the microMIPS decodingAurelien Jarno1-1/+0
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-24target-mips: Clean up microMIPS32 major opcode陳韋任 (Wei-Ren Chen)1-7/+17
I check MIPS microMIPS manual [1], and found the major opcode might be wrong. I add a comment to explicitly indicate what manual I am refering to, and according that manual I remove microMIPS32 major opcodes 0x1f. As for others, like 0x16, 0x17, 0x36 and 0x37, they are for higher-order MIPS ISA level or new revision of this microMIPS architecture. Quote from Johnson, they are belong MIPS64 [2]. [1] http://www.mips.com/products/architectures/micromips/#specifications MIPS Architecture for Programmers Volume II-B: The microMIPS32 Instruction Set (Revision 3.05) MD00582-2B-microMIPS-AFP-03.05.pdf [2] http://www.mips.com/products/architectures/mips64/ MIPS Architecture For Programmers Volume II-A: The MIPS64 Instruction Set MD00087-2B-MIPS64BIS-AFP-03.51.pdf Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw> Reviewed-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-24target-mips: Add comments on POOL32Axf encoding陳韋任 (Wei-Ren Chen)1-0/+17
Current QEMU MIPS POOL32AXF encoding comes from microMIPS32 and microMIPS32 DSP. Add comment here to help reading. Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw> Reviewed-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-22 17:30:51 +0000