summaryrefslogtreecommitdiff
path: root/target-s390x/cpu.h
AgeCommit message (Collapse)AuthorFilesLines
2016-03-10s390x/cpu: Add error handling to cpu creationMatthew Rosato1-0/+2
Check for and propogate errors during s390 cpu creation. Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Message-Id: <1457112875-5209-7-git-send-email-mjrosato@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-03-01s390x: remove {kvm_}s390_virtio_irq()Cornelia Huck1-5/+0
This interface was only used by the old virtio machine and therefore is not needed anymore. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-02-23all: Clean up includesPeter Maydell1-1/+0
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-13s390x: remove s390-virtio devicesPierre Morel1-3/+0
The s390-virtio machine has been removed; remove the associated devices as well. hw/s390x/s390-virtio-bus.c and hw/s390x/s390-virtio-bus.h have been deleted and removed from hw/s390x/Makefile.objs virtio-size has no more meaning for the modern machine and has been removed from helper.c and cpu.h virtio-serial-s390 belonging to the old machine is being removed from vl.c Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-10-21s390x/cmma: clean up cmma resetDavid Hildenbrand1-5/+4
The cmma reset is per VM, so we don't need a cpu object. We can directly make use of kvm_state, as it is already available when the reset is called. By moving the cmma reset in our machine reset function, we can avoid a manual reset handler. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-10-21s390x: reset crypto only on clear reset and QEMU resetDavid Hildenbrand1-0/+11
Initializing VM crypto in initial cpu reset has multiple problems 1. We call the exact same function #VCPU times, although one time is enough 2. On SIGP initial cpu reset, we exchange the wrapping key while other VCPUs are running. Bad! 3. It is simply wrong. According to the Pop, a reset happens only during a clear reset. So, we have to reset the keys - on modified clear reset - on load clear (QEMU reset - via machine reset) - on qemu start (via machine reset) Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-10-20s390x: flagify mcic valuesCornelia Huck1-0/+45
Instead of using magic values when building the machine check interruption code, add some defines as by chapter 11-14 in the PoP. This should make it easier to catch problems like the missing vector register validity bit ("s390x/kvm: Fix vector validity bit in device machine checks"), and less hassle should we want to generate machine checks beyond the channel reports we currently support. Acked-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-10-08Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20151007' into stagingPeter Maydell1-1/+1
Do away with TB retranslation # gpg: Signature made Wed 07 Oct 2015 10:42:08 BST using RSA key ID 4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" * remotes/rth/tags/pull-tcg-20151007: (26 commits) tcg: Adjust CODE_GEN_AVG_BLOCK_SIZE tcg: Check for overflow via highwater mark tcg: Allocate a guard page after code_gen_buffer tcg: Emit prologue to the beginning of code_gen_buffer tcg: Remove tcg_gen_code_search_pc tcg: Remove gen_intermediate_code_pc tcg: Save insn data and use it in cpu_restore_state_from_tb tcg: Pass data argument to restore_state_to_opc tcg: Add TCG_MAX_INSNS target-*: Drop cpu_gen_code define tcg: Merge cpu_gen_code into tb_gen_code target-sparc: Add npc state to insn_start target-sparc: Remove gen_opc_jump_pc target-sparc: Split out gen_branch_n target-sparc: Tidy gen_branch_a interface target-cris: Mirror gen_opc_pc into insn_start target-sh4: Add flags state to insn_start target-s390x: Add cc_op state to insn_start target-mips: Add delayed branch state to insn_start target-i386: Add cc_op state to insn_start ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-07target-*: Drop cpu_gen_code defineRichard Henderson1-1/+0
This symbol no longer exists. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-s390x: Add cc_op state to insn_startRichard Henderson1-0/+1
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-02s390x: rename io_subsystem_reset -> subsystem_resetDavid Hildenbrand1-1/+1
According to the Pop: "Subsystem reset operates only on those elements in the configuration which are not CPUs". As this is what we actually do, let's simply rename the function. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Message-Id: <1443689387-34473-6-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-09-25s390: Remove ELF_MACHINE from cpu.hPeter Crosthwaite1-1/+0
The bootloader can just pass EM_S390 directly, as that is architecture specific code. This removes another architecture specific definition from the global namespace. Cc: Richard Henderson <rth@twiddle.net> Cc: Alexander Graf <agraf@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Acked-By: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-11tlb: Add "ifetch" argument to cpu_mmu_index()Benjamin Herrenschmidt1-1/+1
This is set to true when the index is for an instruction fetch translation. The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS acessors. All targets ignore it for now, and all other callers pass "false". This will allow targets who wish to split the mmu index between instruction and data accesses to do so. A subsequent patch will do just that for PowerPC. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Message-Id: <1439796853-4410-2-git-send-email-benh@kernel.crashing.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-03s390x: Enable new s390-storage-keys deviceJason J. Herne1-2/+0
s390 guest initialization is modified to make use of new s390-storage-keys device. Old code that globally allocated storage key array is removed. The new device enables storage key access for kvm guests. Cache storage key QOM objects in frequently used helper functions to avoid a performance hit every time we use one of these functions. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-07-09cpu-exec: Purge all uses of ENV_GET_CPU()Peter Crosthwaite1-1/+1
Remove un-needed usages of ENV_GET_CPU() by converting the APIs to use CPUState pointers and retrieving the env_ptr as minimally needed. Scripted conversion for target-* change: for I in target-*/cpu.h; do sed -i \ 's/\(^int cpu_[^_]*_exec(\)[^ ][^ ]* \*s);$/\1CPUState *cpu);/' \ $I; done Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-06-17target-s390x: PER: add Breaking-Event-Address registerAurelien Jarno1-5/+7
This patch adds support for PER Breaking-Event-Address register. Like real hardware, it save the current PSW address when the PSW address is changed by an instruction. We have to take care of optimizations QEMU does, a branch to the next instruction is still a branch. This register is copied to low core memory when a program exception happens. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17target-s390x: PER storage-alteration event supportAurelien Jarno1-0/+1
For the PER storage-alteration event we can use the QEMU watchpoint infrastructure. When PER is enabled or PER control register changed we enable the corresponding watchpoints. When a watchpoint arises we can save the event. Unfortunately the current code does not provide the address space used to trigger the watchpoint. For now we assume it comes from the default ASC. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17target-s390x: basic PER event handlingAurelien Jarno1-0/+3
This patch add basic support to generate PER exceptions. It adds two fields to the cpu structure to record for the PER address and PER code & ATMID values. When an exception is triggered and a PER event is pending, the two PER values are copied to the lowcore area. At the end of an instruction, an helper is checking for a possible pending PER event and triggers an exception in that case. For that to work with branches, we need to disable TB chaining when PER is activated. Fortunately it's already in the TB flags. Finally in case of a SERVICE CALL exception, we need to trigger the PER exception immediately after. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17target-s390x: add get_per_in_range functionAurelien Jarno1-0/+11
This function checks if an address is in between the PER starting address and the PER ending address, taking care of a possible address range loop. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17target-s390x: add get_per_atmid functionAurelien Jarno1-0/+12
This function returns the ATMID field that is stored in the per_perc_atmid lowcore entry. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17target-s390x: add PER related constantsAurelien Jarno1-0/+16
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17target-s390x: fix setcc in TCG modeAurelien Jarno1-0/+1
In TCG mode we should store the CC value in env->cc_op. However do it inconditionnaly because: - the tcg_enabled function is not inlined - it's probably faster to always store the value, especially given it is likely in the same cache line than env->psw.mask. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-17virtio-ccw: disable ioevent bit when ioeventfds are not enabledAurelien Jarno1-5/+1
This remove the corresponding error messages in TCG mode, and allow to simplify the s390_assign_subch_ioeventfd() function. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-11s390x/kvm: diag288 instruction interception and handlingXu Wang1-0/+1
Intercept the diag288 requests from kvm guests, and hand the requested command to the diag288 watchdog device for further handling. Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-06-05target-s390x: add a cpu_mmu_idx_to_asc functionAurelien Jarno1-3/+22
Use constants to define the MMU indexes, and add a function to do the reverse conversion of cpu_mmu_index. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05target-s390x: fix MMU index computationAurelien Jarno1-4/+11
The cpu_mmu_index function wrongly looks at PSW P bit to determine the MMU index, while this bit actually only control the use of priviledge instructions. The addressing mode is detected by looking at the PSW ASC bits instead. This used to work more or less correctly up to kernel 3.6 as the kernel was running in primary space and userland in secondary space. Since kernel 3.7 the default is to run the kernel in home space and userland in primary space. While the current QEMU code seems to work it open some security issues, like accessing the lowcore memory in R/W mode from a userspace process once it has been accessed by the kernel (it is then cached by the QEMU TLB). At the same time change the MMU_USER_IDX value so that it matches the value used in recent kernels. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-05target-s390x: add a tod2time functionAurelien Jarno1-0/+5
Add a tod2time function similar to the time2tod one, instead of open coding the conversion. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-05-27s390x: Migrate vector registersEric Farman1-0/+14
When migrating a guest, be sure to include the vector registers. The vector registers are defined in a subsection, similar to the existing subsection for floating point registers. Since the floating point registers are always present (and thus migrated), we can skip them when performing the migration of the vector registers which may or may not be present. Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27s390x: Store Additional Status SIGP orderEric Farman1-0/+1
Add handling for the Store Additional Status at Address order that exists for the Signal Processor (SIGP) instruction. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27s390x: Vector Register IOCTLsEric Farman1-2/+6
Handle the actual syncing of the vector registers with kernel space, via the get/put register IOCTLs. The vector registers that were introduced with the z13 overlay the existing floating point registers. FP registers 0-15 are the high-halves of vector registers 0-15. Thus, remove the freg fields and replace them with the equivalent vector field to avoid errors in duplication. Moreover, synchronize either the vector registers via kvm_sync_regs, or floating point registers via the GET/SET FPU IOCTLs. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27s390x: Common access to floating point registersEric Farman1-0/+5
Provide a routine to access the correct floating point register, to simplify future expansion. Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-08s390x/kvm: migrate vcpu interrupt stateJens Freimann1-0/+9
This patch adds support to migrate vcpu interrupts. We use ioctl KVM_S390_GET_IRQ_STATE and _SET_IRQ_STATE to get/set the complete interrupt state for a vcpu. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-04-30s390x/kvm: Support access register mode for KVM_S390_MEM_OP ioctlAlexander Yarygin1-13/+17
Access register mode is one of the modes that control dynamic address translation. In this mode the address space is specified by values of the access registers. The effective address-space-control element is obtained from the result of the access register translation. See the "Access-Register Introduction" section of the chapter 5 "Program Execution" in "Principles of Operations" for more details. When the CPU is in AR mode, the s390_cpu_virt_mem_rw() function must know which access register number to use for address translation. This patch does several things: - add new parameter 'uint8_t ar' to that function - decode ar number from intercepted instructions - pass the ar number to s390_cpu_virt_mem_rw(), which in turn passes it to the KVM_S390_MEM_OP ioctl. Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-04-30s390x/mmu: Use ioctl for reading and writing from/to guest memoryThomas Huth1-0/+7
Add code to make use of the new ioctl for reading from / writing to virtual guest memory. By using the ioctl, the memory accesses are now protected with the so-called ipte-lock in the kernel. [CH: moved error message into kvm_s390_mem_op()] Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-04-30s390x/kvm: Put vm name, extended name and UUID into STSI322 SYSIBEkaterina Tumanova1-2/+6
KVM prefills the SYSIB, returned by STSI 3.2.2. This patch allows userspace to intercept execution, and fill in the values, that are known to qemu: machine name (8 chars), extended machine name (256 chars), extended machine name encoding (equals 2 for UTF-8) and UUID. STSI322 qemu handler also finds a highest virtualization level in level-3 virtualization stack that doesn't support Extended Names (Ext Name delimiter) and propagates zero Ext Name to all levels below, because this level is not capable of managing Extended Names of lower levels. Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16s390x/kvm: Guest Migration TOD clock synchronizationJason J. Herne1-0/+34
Synchronizes the guest TOD clock across a migration by sending the guest TOD clock value to the destination system. If the guest TOD clock is not preserved across a migration then the guest's view of time will snap backwards if the destination host clock is behind the source host clock. This will cause the guest to hang immediately upon resuming on the destination system. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Message-Id: <1425912968-54387-1-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-11Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150310' into ↵Peter Maydell1-2/+38
staging s390x/kvm: Features and fixes for 2.3 - an extension to the elf loader to allow relocations - make the ccw bios relocatable. This allows for bigger ramdisks or smaller guests - Handle all slow SIGPs in QEMU (instead of kernel) for better compliance and correctness - tell the KVM module the maximum guest size. This allows KVM to reduce the number or page table levels - Several fixes/cleanups # gpg: Signature made Wed Mar 11 10:17:13 2015 GMT using RSA key ID B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" * remotes/borntraeger/tags/s390x-20150310: s390-ccw: rebuild BIOS s390/bios: Make the s390-ccw.img relocatable elf-loader: Provide the possibility to relocate s390 ELF files s390-ccw.img: Reinitialize guessing on reboot s390-ccw.img: Allow bigger ramdisk sizes or offsets s390x/kvm: passing max memory size to accelerator virtio-ccw: Convert to realize() virtio-s390: Convert to realize() virtio-s390: s390_virtio_device_init() can't fail, simplify s390x/kvm: enable the new SIGP handling in user space s390x/kvm: deliver SIGP RESTART directly if stopped s390x: add function to deliver restart irqs s390x/kvm: SIGP START is only applicable when STOPPED s390x/kvm: implement handling of new SIGP orders s390x/kvm: trace all SIGP orders s390x/kvm: helper to set the SIGP status in SigpInfo s390x/kvm: pass the SIGP instruction parameter to the SIGP handler s390x/kvm: more details for SIGP handler with one destination vcpu s390x: introduce defines for SIGP condition codes synchronize Linux headers to 4.0-rc3 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-10cpu: Make cpu_init() return QOM CPUState objectEduardo Habkost1-1/+1
Instead of making cpu_init() return CPUArchState, return CPUState. Changes were made using the Coccinelle semantic patch below. @@ typedef CPUState; identifier e; expression args; type CPUArchState; @@ - e = + cpu = cpu_init(args); - if (!e) { + if (!cpu) { ... } - cpu = ENV_GET_CPU(env); + e = cpu->env_ptr; @@ identifier new_env, new_cpu, env, cpu; type CPUArchState; expression args; @@ -{ - CPUState *cpu = ENV_GET_CPU(env); - CPUArchState *new_env = cpu_init(args); - CPUState *new_cpu = ENV_GET_CPU(new_env); +{ + CPUState *cpu = ENV_GET_CPU(env); + CPUState *new_cpu = cpu_init(args); + CPUArchState *new_env = new_cpu->env_ptr; ... } @@ identifier c, cpu_init_func, cpu_model; type StateType, CPUType; @@ -static inline StateType* cpu_init(const char *cpu_model) -{ - CPUType *c = cpu_init_func(cpu_model); ( - if (c == NULL) { - return NULL; - } - return &c->env; | - if (c) { - return &c->env; - } - return NULL; ) -} +#define cpu_init(cpu_model) CPU(cpu_init_func(cpu_model)) @@ identifier cpu_init_func; identifier model; @@ -#define cpu_init(model) (&cpu_init_func(model)->env) +#define cpu_init(model) CPU(cpu_init_func(model)) Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Max Filippov <jcmvbkbc@gmail.com> [AF: Fixed up cpu_copy() manually] Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-10s390x/kvm: passing max memory size to acceleratorDominik Dingel1-0/+14
With "KVM: s390: Allow userspace to limit guest memory size" KVM is able to do some optimizations based on the guest memory limit. The guest memory limit is computed by the initial definition and with the notion of hotplugged memory. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Message-Id: <1425570981-40609-3-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x: add function to deliver restart irqsDavid Hildenbrand1-1/+4
This patch adds a helper function to deliver restart irqs. To be able to be used by kvm, the psw load/store methods have to perform special cc-code handling only when running with tcg. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-9-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: implement handling of new SIGP ordersDavid Hildenbrand1-0/+12
This patch adds handling code for the following SIGP orders: - SIGP SET ARCHITECTURE - SIGP SET PREFIX - SIGP STOP - SIGP STOP AND STORE STATUS - SIGP STORE STATUS AT ADDRESS SIGP STOP (AND STORE STATUS) are the only orders that can stay pending forever (and may only be interrupted by resets), so special care has to be taken about them. Their status also has to be tracked within QEMU. This patch takes care of migrating this status (e.g. if migration happens during a SIGP STOP). Due to the BQL, only one VCPU is currently able to execute SIGP handlers at a time. According to the PoP, BUSY should be returned if another SIGP order is currently being executed on a VCPU. This can only be implemented when the BQL does not protect all handlers. For now, all SIGP orders on all VCPUs will be serialized, which will be okay for the first shot. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-7-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x: introduce defines for SIGP condition codesDavid Hildenbrand1-1/+8
This patch introduces defines for the SIGP condition codes and replaces all occurrences of numeral condition codes with the new defines. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-2-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-18s390x/helper: Remove s390_cpu_physical_memory_mapThomas Huth1-4/+0
The function is now not used anymore, so it can be removed safely. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-18s390x/ioinst: Rework memory access in STCRW instructionThomas Huth1-0/+1
Change the handler for STCRW to use the new logical memory access functions. Since STCRW is suppressed on protection/access exceptions, we also have to make sure to re-queue the CRW in case it could not be written to the memory. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-18s390x/ioinst: Rework memory access in TSCH instructionThomas Huth1-1/+2
Change the TSCH handler to use the new logical memory access functions. Since the channel should not be updated in case of a protection or access exception while writing to the guest memory, the css_do_tsch() has to be split up into two parts, one for retrieving the IRB and one for the update. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-18s390x/css: Make schib parameter of css_do_msch constThomas Huth1-1/+1
The schib parameter of css_do_msch() can be declared as const to make it clear that it does not get modified by this function. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-18s390x/mmu: Add function for accessing guest memoryThomas Huth1-0/+11
According to the POP specification, the parameter blocks of various functions like the IO instructions are accessed with logical addresses. Thus we need a function that can read or write a buffer from/to the guest's logical address space. This patch now provides a function that can be used to access virtual guest memory by using the mmu_translate function of QEMU to convert the virtual addresses to physical. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-18s390x/kvm: Add function for injecting pgm access exceptionsThomas Huth1-0/+5
Program access exceptions are defined to deliver a translation exception code in the low-core. Add a function trigger_access_exception() that generates the proper program interrupt on both KVM and non-KVM systems and switch the existing code to use it. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-18s390x/mmu: Check bit 52 in page table entryThomas Huth1-0/+1
Bit 52 in a page table entry has always to be zero, or a translation specification exception is to be recognized. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-18s390x/mmu: Add support for read-only regionsThomas Huth1-0/+1
If the "DAT-protection" bit is set in the region table entry and EDAT is enabled, only read accesses are allowed in the corresponding memory area. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-07 16:46:32 +0000