summaryrefslogtreecommitdiff
path: root/target-sh4/translate.c
AgeCommit message (Collapse)AuthorFilesLines
2012-09-27Emit debug_insn for CPU_LOG_TB_OP_OPT as well.Richard Henderson1-1/+1
For all targets that currently call tcg_gen_debug_insn_start, add CPU_LOG_TB_OP_OPT to the condition that gates it. This is useful for comparing optimization dumps, when the pre-optimization dump is merely noise. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: remove useless codeAurelien Jarno1-4/+0
Almost dead code. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: cleanup DisasContextAurelien Jarno1-30/+26
We should avoid accessing env at translation stage, except of course for static values like the supported features. Remove variables copied from env in DisasContext and use the TB flags instead. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: rework exceptions handlingAurelien Jarno1-6/+12
Since commit fd4bab102 PC is restored in case of exception through code retranslation. While it is clearly the thing to do in case it is not not known if an helper is going to trigger an exception or not (e.g. for load/store, FPU, etc.), it just make things slower when the exception is already known at translation time. Partially revert this commit and save PC in the TCG code. Set bstate to BS_BRANCH to not generate TCG exit code. Micro-optimize the sleep helper. Make all the exception helpers to call raise_exception and mark it as noreturn. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: remove gen_clr_t() and gen_set_t()Aurelien Jarno1-13/+3
gen_clr_t() and gen_set_t() have very few callers and can be remplaced by a single line. Remove them. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: optimize swap.wAurelien Jarno1-11/+1
It's possible swap the two 16-bit words of a 32-bit register using a rotation. If the TCG target doesn't implement rotation, the replacement code is similar to the previously implemented code. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: optimize xtrctAurelien Jarno1-1/+0
The register being 32 bit long, after a shift to the right by 16 bits, the upper 16 bit are already cleared. There is no need to call ext16u to clear them. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: implement addv and subv using TCGAurelien Jarno1-2/+34
addv and subv helpers implementation is directly copied from the SH4 manual and looks quite complex. It is however possible to explain it without branches, and is therefore possible to implement it with TCG. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: implement addc and subc using TCGAurelien Jarno1-2/+36
Now that setcond is available, the addc and subc can easily be implemented using TCG. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-15target-sh4: switch to AREG0 free modeBlue Swirl1-51/+63
Add an explicit CPUState parameter instead of relying on AREG0 and switch to AREG0 free mode. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-04Kill off cpu_state_reset()Andreas Färber1-5/+0
In commit 1bba0dc932e8826a7d030df3767daf0bc339f9a2 cpu_reset() was renamed to cpu_state_reset(), to allow introducing a new cpu_reset() that would operate on QOM objects. All callers have been updated except for one in target-mips, so drop all implementations except for the one in target-mips and move the declaration there until MIPSCPU reset can be fully QOM'ified. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris) Acked-by: Alexander Graf <agraf@suse.de> (for ppc) Acked-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-04target-sh4: Let cpu_sh4_init() return SuperHCPUAndreas Färber1-2/+2
Turn cpu_init macro into a static inline function returning CPUSH4State for backwards compatibility. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-30target-sh4: Start QOM'ifying CPU initAndreas Färber1-2/+0
Move code from cpu_sh4_init() into a QOM initfn. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-30target-sh4: QOM'ify CPU resetAndreas Färber1-20/+2
Move code from cpu_state_reset() to QOM superh_cpu_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-04-30target-sh4: QOM'ify CPUAndreas Färber1-1/+3
Embed CPUSH4State as first member of SuperHCPU. Let CPUClass::reset() call cpu_state_reset() for now. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-14target-sh4: Don't overuse CPUStateAndreas Färber1-23/+23
Scripted conversion: sed -i "s/CPUState/CPUSH4State/g" target-sh4/*.[hc] sed -i "s/#define CPUSH4State/#define CPUState/" target-sh4/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14Rename cpu_reset() to cpu_state_reset()Andreas Färber1-2/+2
Frees the identifier cpu_reset for QOM CPUs (manual rename). Don't hide the parameter type behind explicit casts, use static functions with strongly typed argument to indirect. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-28target-sh4: Clean includesStefan Weil1-6/+0
Remove some include statements which are not needed. Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2012-01-10target-sh4: ignore ocbp and ocbwb instructionsAurelien Jarno1-11/+3
ocbp and ocbwb controls the writeback of a cache line to memory. They are supposed to do nothing in case of a cache miss. Given QEMU only partially emulate caches, it is safe to ignore these instructions. This fixes a kernel oops when trying to access an rtl8139 NIC with recent versions. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-01-07target-sh4: Fix operands for fipr, ftrv instructionsStefan Weil1-3/+3
Coverity complained about right shifts of opcode (16, 18) which were larger than the size of opcode (16 bit). Using the correct shift values fixes this. Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-1/+1
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-26Remove exec-all.h include directivesBlue Swirl1-1/+0
Most exec-all.h include directives are now useless, remove them. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-20Remove unused function parameters from gen_pc_load and rename the functionStefan Weil1-2/+1
Function gen_pc_load was introduced in commit d2856f1ad4c259e5766847c49acbb4e390731bd4. The only reason for parameter searched_pc was a debug statement in target-i386/translate.c. Parameter puc was needed by target-sparc until commit d7da2a10402f1644128b66414ca8f86bdea9ae7c. Remove searched_pc from the debug statement and remove both parameters from the parameter list of gen_pc_load. As the function name gen_pc_load was also misleading, it is now called restore_state_to_opc. This new name was suggested by Peter Maydell, thanks. v2: Remove last parameter, too, and rename the function. v3: Fix [] typo in target-arm/translate.c. Fix wrong SHA1 object name in commit message (copy+paste error). Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <weil@mail.berlios.de>
2011-04-10Fix conversions from pointer to tcg_target_longStefan Weil1-1/+1
tcg_gen_exit_tb takes a parameter of type tcg_target_long, so the type casts of pointer to long should be replaced by type casts of pointer to tcg_target_long (suggested by Blue Swirl). These changes are needed for build environments where sizeof(long) != sizeof(void *), especially for w64. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-04target-sh4: fix negcAurelien Jarno1-2/+2
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-16target-sh4: implement negc using TCGAurelien Jarno1-1/+15
Using setcond it's now possible to generate a relatively short negc instruction in TCG. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-16target-sh4: use rotl/rotr when possibleAurelien Jarno1-5/+3
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14target-sh4: use setcond when possibleAurelien Jarno1-29/+27
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14target-sh4: log instructions start in TCG codeAurelien Jarno1-0/+4
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14target-sh4: simplify comparisons after a 'and' opAurelien Jarno1-3/+3
When a TCG variable is anded with a value and the compared with the same value, we can simply invert the comparison and compare it with 0. The generated code is smaller. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14target-sh4: fix reset on r2dAurelien Jarno1-12/+8
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14target-sh4: optimize exceptionsAurelien Jarno1-5/+0
As exception is not the normal path, don't bother saving PC, before raising one, instead rely on code retranslation to get the CPU state. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14target-sh4: add ftrv instructionAurelien Jarno1-0/+11
Add the ftrv XMTRX,FVn instruction, which computes the 4-row x 4-column matrix XMTRX by the 4-dimensional vector FVn. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14target-sh4: add fipr instructionAurelien Jarno1-0/+12
Add the fipr FVm,FVn instruction, which computes the inner products of a 4-dimensional single precision floating-point vector. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14target-sh4: implement flush-to-zeroAurelien Jarno1-0/+1
When the FPSCR.DN bit is set, the SH4 FPU treat denormalized numbers as zero. Enable the corresponding softfloat option when this bit is set. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14target-sh4: define FPSCR constantsAurelien Jarno1-2/+2
Define FPSCR constants for all field and use them instead of hardcoded values. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14target-sh4: use default-NaN modeAurelien Jarno1-0/+1
SH4 FPU doesn't propagate NaN, and instead always regenerate new ones. Enable the default-NaN mode by default. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-11target-sh4: fix fpu disabled/illegal exceptionAurelien Jarno1-10/+18
Illegal instructions in a slot delay should generate a slot illegal instruction exception instead of an illegal instruction exception. The current PC should be saved before generating such an exception, but should not be corrected if in a delay slot, given it's already done in the exception handler do_interrupt(). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-10-30target-xxx: Use fprintf_function (format checking)Stefan Weil1-1/+1
fprintf_function uses format checking with GCC_FMT_ATTR. Format errors were fixed in * target-i386/helper.c * target-mips/translate.c * target-ppc/translate.c Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-12target-sh4: Add support for ldc & stc with sgrAlexandre Courbot1-0/+2
Add support for the following missing priviledged intructions: For SH4: - stc sgr, Rn - stc.l sgr, @-Rn For SH4A: - ldc Rm, sgr - ldc.l @Rm+, sgr Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-12target-sh4: Split the LDST macro into 2 sub-macrosAlexandre Courbot1-2/+6
The LDST macro is used to generate ldc and stc instructions that work with a specific register. However, the SGR register only supports stc up to SH4A, which supports both stc and ldc. This patch creates two sub-macros named LD and ST that handle generating ldc and stc instructions separately, and redeclares LDST to use these sub-macro. Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-05target-sh4: Remove duplicate CPU log.Richard Henderson1-6/+0
Logging for -d cpu is done in generic code. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-08remove TARGET_* defines from translate-all.cPaolo Bonzini1-0/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-09target-sh4: MMU: fix mem_idx computationAurelien Jarno1-1/+1
The mem_idx is wrongly computed. As written in target-sh4/cpu.h, mode 0 corresponds to kernel mode (SR_MD = 1), while mode 1 corresponds to user mode (SR_MD = 0). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-08target-sh4: minor optimisationsAurelien Jarno1-26/+26
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-09-12Fix sys-queue.h conflict for goodBlue Swirl1-2/+2
Problem: Our file sys-queue.h is a copy of the BSD file, but there are some additions and it's not entirely compatible. Because of that, there have been conflicts with system headers on BSD systems. Some hacks have been introduced in the commits 15cc9235840a22c289edbe064a9b3c19c5f49896, f40d753718c72693c5f520f0d9899f6e50395e94, 96555a96d724016e13190b28cffa3bc929ac60dc and 3990d09adf4463eca200ad964cc55643c33feb50 but the fixes were fragile. Solution: Avoid the conflict entirely by renaming the functions and the file. Revert the previous hacks. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-16Update to a hopefully more future proof FSF addressBlue Swirl1-2/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-05-13Include assert.h from qemu-common.hPaul Brook1-1/+0
Include assert.h from qemu-common.h and remove other direct uses. cpu-all.h still need to include it because of the dyngen-exec.h hacks Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-24qemu: introduce qemu_init_vcpu (Marcelo Tosatti)aliguori1-0/+1
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7242 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05Add new command line option -singlestep for tcg single stepping.aurel321-3/+2
This replaces a compile time option for some targets and adds this feature to targets which did not have a compile time option. Add monitor command to enable or disable single step mode. Modify monitor command "info status" to display single step mode. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7004 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-26 18:15:46 +0000