summaryrefslogtreecommitdiff
path: root/tcg/mips/tcg-target.c
AgeCommit message (Collapse)AuthorFilesLines
2013-10-10tcg: Add tcg-be-null.hRichard Henderson1-0/+2
This is a no-op backend data implementation, for those targets that are not currently using the load/store optimization path. This is prepatory to always requiring these functions in all backends. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-03Merge branch 'tcg-next' of git://github.com/rth7680/qemuAurelien Jarno1-13/+20
* 'tcg-next' of git://github.com/rth7680/qemu: (29 commits) tcg-i386: Make use of zero-extended memory helper routines tcg: Introduce zero and sign-extended versions of load helpers exec: Split softmmu_defs.h target: Include softmmu_exec.h where forgotten exec: Rename USUFFIX to LSUFFIX tcg-i386: Don't perform GETPC adjustment in TCG code exec: Reorganize the GETRA/GETPC macros configure: Allow x32 as a host tcg-i386: Adjust tcg_out_tlb_load for x32 tcg-i386: Use intptr_t appropriately tcg: Fix jit debug for x32 tcg: Use appropriate types in tcg_reg_alloc_call tcg: Change tcg_out_ld/st offset to intptr_t tcg: Change tcg_gen_exit_tb argument to uintptr_t tcg: Use uintptr_t in TCGHelperInfo tcg: Change relocation offsets to intptr_t tcg: Change memory offsets to intptr_t tcg: Change frame pointer offsets to intptr_t tcg: Define TCG_ptr properly tcg: Define TCG_TYPE_PTR properly ...
2013-09-03tcg/mips: only enable ext8s/ext16s ops on MIPS32R2Aurelien Jarno1-2/+2
On MIPS ext8s and ext16s ops are implemented with a dedicated instruction only on MIPS32R2, otherwise the same kind of implementation than at TCG level (shift left followed by shift right) is used. Change that by only implementing the ext8s and ext16s ops on MIPS32R2 so that optimizations can be done by the optimizer. Use an inline version to avoid having to test again for MIPS32R2 instructions. Keep the shift implementation for the ld/st routines. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-03tcg/mips: inline bswap16/bswap32 opsAurelien Jarno1-4/+3
Use an inline version for the bswap16 and bswap32 ops to avoid testing for MIPS32R2 instructions availability, as these ops are only available in that case. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-03tcg/mips: detect available host instructions at runtimeAurelien Jarno1-71/+142
Now that TCG supports enabling and disabling ops at runtime, it's possible to detect the available host instructions at runtime, and enable the corresponding ops accordingly. Unfortunately it's not easy to probe for available instructions on MIPS, the information is partially available in /proc/cpuinfo, and not available in AUXV. This patch therefore probes for the instructions by trying to execute them and by catching a possible SIGILL signal. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-02exec: Split softmmu_defs.hRichard Henderson1-3/+0
The _cmmu helpers can be moved to exec-all.h. The helpers that are used from TCG will shortly need access to tcg_target_long so move their declarations into tcg.h. This requires minor include adjustments to all TCG backends. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change tcg_out_ld/st offset to intptr_tRichard Henderson1-2/+2
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change relocation offsets to intptr_tRichard Henderson1-8/+8
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg-mips: Implement mulsh, muluhRichard Henderson1-0/+10
With the optimization in tcg_liveness_analysis, we can avoid the MFLO when it is unused. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-08-08tcg/mips: fix invalid op definition errorsJames Hogan1-0/+10
tcg/mips/tcg-target.h defines various operations conditionally depending upon the isa revision, however these operations are included in mips_op_defs[] unconditionally resulting in the following runtime errors if CONFIG_DEBUG_TCG is defined: Invalid op definition for movcond_i32 Invalid op definition for rotl_i32 Invalid op definition for rotr_i32 Invalid op definition for deposit_i32 Invalid op definition for bswap16_i32 Invalid op definition for bswap32_i32 tcg/tcg.c:1196: tcg fatal error Fix with ifdefs like the i386 backend does for movcond_i32. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-04-01tcg/mips: Implement muls2_i32Aurelien Jarno1-0/+6
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-12-19exec: move include files to include/exec/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-30tcg/mips: use MUL instead of MULT on MIPS32 and aboveAurelien Jarno1-0/+7
MIPS32 and later instruction sets have a multiplication instruction directly operating on GPRs. It only produces a 32-bit result but it is exactly what is needed by QEMU. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-06tcg: remove obsolete jmp opAurelien Jarno1-5/+0
The TCG jmp operation doesn't really make sense in the QEMU context, it is unused, it is not implemented by some targets, and it is wrongly implemented by some others. This patch simply removes it. Reviewed-by: Richard Henderson <rth@twiddle.net> Acked-by: Blue Swirl <blauwirbel@gmail.com> Acked-by: Stefan Weil<sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-26tcg/mips: fix MIPS32(R2) detectionAurelien Jarno1-5/+5
Fix the MIPS32(R2) cpu detection so that it also works with -march=octeon. Thanks to Andrew Pinski for the hint. Cc: Andrew Pinski <apinski@cavium.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22Revert "tcg/mips"Aurelien Jarno1-2/+2
This reverts commit ad49d1f75115663731bfe06dec61eed6775526ad. This commit was not supposed to be pushed. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mipsAurelien Jarno1-2/+2
2012-09-22tcg: Remove tcg_target_get_call_iarg_regs_countStefan Weil1-6/+0
The TCG targets no longer need individual implementations. Since commit 6a18ae2d2947532d5c26439548afa0481c4529f9, 'flags' is no longer used in tcg_target_get_call_iarg_regs_count. The remaining tcg_target_get_call_iarg_regs_count is trivial and only called once. Therefore the patch eliminates it completely. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: implement movcond op on MIPS32R2Aurelien Jarno1-0/+69
movcond operation can be implemented on MIPS32 Release 2 using the MOVN, MOVZ, SLT and SLTU instructions. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: implement deposit op on MIPS32R2Aurelien Jarno1-0/+8
deposit operations can be optimized on MIPS32 Release 2 using the INS instruction. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: implement rotl/rotr ops on MIPS32R2Aurelien Jarno1-0/+20
rotr operations can be optimized on MIPS32 Release 2 using the ROTR and ROTRV instructions. Also implemented rotl operations by subtracting the shift from 32. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: optimize bswap{16,16s,32} on MIPS32R2Aurelien Jarno1-5/+29
bswap operations can be optimized on MIPS32 Release 2 using the ROTR, WSBH and SEH instructions. We can't use the non-R2 code to implement the ops due to registers constraints, so don't define the corresponding TCG_TARGET_HAS_bswap* values. Also bswap16* operations are supposed to be called with the 16 high bits zeroed. This is the case everywhere (including for TCG by definition) except when called from the store helper. Remove the AND instructions from bswap16* and move it there. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: optimize brcond arg, 0Aurelien Jarno1-8/+30
MIPS has some conditional branch instructions when comparing with zero. Use them. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: use stack for TCG tempsAurelien Jarno1-4/+6
Use stack instead of temp_buf array in CPUState for TCG temps. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: don't use global pointerAurelien Jarno1-1/+1
Don't use the global pointer in TCG, in case helpers try access global variables. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: use TCGArg or TCGReg instead of intAurelien Jarno1-28/+35
Instead of int, use the correct TCGArg and TCGReg type: TCGReg when representing a TCG target register, TCGArg when representing the latter or a constant. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: kill warnings in user modeAurelien Jarno1-41/+43
Recent versions of GCC emit warnings when compiling user mode targets. Kill them by reordering a bit the #ifdef. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg-mips: fix wrong usage of 'Z' constraintAurelien Jarno1-8/+8
The 'Z' constraint has been introduced to map the zero register. However when the op also accept a constant, there is no point to accept the zero register in addition. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-15Remove unused CONFIG_TCG_PASS_AREG0 and dead codeBlue Swirl1-28/+3
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets, remove dead code and support for !CONFIG_TCG_PASS_AREG0 case. Remove dyngen-exec.h and all references to it. Although included by hw/spapr_hcall.c, it does not seem to use it. Remove unused HELPER_CFLAGS. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-08-28tcg/mips: fix broken CONFIG_TCG_PASS_AREG0 codeAurelien Jarno1-59/+99
The CONFIG_TCG_PASS_AREG0 code for calling ld/st helpers was broken in that it did not respect the ABI requirement that 64 bit values were passed in even-odd register pairs. The simplest way to fix this is to implement some new utility functions for marshalling function arguments into the correct registers and stack, so that the code which sets up the address and data arguments does not need to care whether there has been a preceding env argument. Based on commit 9716ef3b for ARM by Peter Maydell. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-18softmmu templates: optionally pass CPUState to memory access functionsBlue Swirl1-0/+44
Optionally, make memory access helpers take a parameter for CPUState instead of relying on global env. On most targets, perform simple moves to reorder registers. On i386, switch from regparm(3) calling convention to standard stack-based version. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-14Rename CPUState -> CPUArchStateAndreas Färber1-7/+7
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-14tcg: Use TCGReg for standard tcg-target entry points.Richard Henderson1-6/+7
Including tcg_out_ld, tcg_out_st, tcg_out_mov, tcg_out_movi. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-20tcg/mips: Fix regression caused by typo (copy + paste bug)Stefan Weil1-1/+1
cppcheck reports an error: qemu/tcg/mips/tcg-target.c:1487: error: Invalid number of character (() The unpatched code won't compile on mips hosts starting with commit cea5f9a28faa528b6b1b117c9ab2d8828f473fef. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26Delegate setup of TCG temporaries to targetsBlue Swirl1-0/+2
Delegate TCG temp_buf setup to targets, so that they can use a stack frame later instead. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26cpu-exec.c: avoid AREG0 useBlue Swirl1-5/+3
Make functions take a parameter for CPUState instead of relying on global env. Pass CPUState pointer to TCG prologue, which moves it to AREG0. Thanks to Peter Maydell and Laurent Desnogues for the ARM prologue change. Revert the hacks to avoid AREG0 use on Sparc hosts. Move cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h. Compile the file without HELPER_CFLAGS. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-12tcg arm/mips/ia64: add a comment about retranslation and cachesAurelien Jarno1-1/+3
Add a comment about cache coherency and retranslation, so that people developping new targets based on existing ones are warned of the issue. Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-08tcg/mips: fix branch target change during code retranslationAurelien Jarno1-1/+1
TCG on MIPS was trying to avoid changing the branch offset, but didn't due to a stupid typo. Fix it. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09tcg: Make some tcg-target.c routines static.Richard Henderson1-2/+2
Both tcg_target_init and tcg_target_qemu_prologue are unused outside of tcg.c. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09tcg: Add TYPE parameter to tcg_out_mov.Richard Henderson1-14/+14
Mirror tcg_out_movi in having a TYPE parameter. This allows x86_64 to perform the move at the proper width, which may elide a REX prefix. Introduce a TCG_TYPE_REG enumerator to represent the "native width" of the host register, and to distinguish the usage from "pointer data" as represented by the existing TCG_TYPE_PTR. Update all targets to match. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-14tcp/mips: Change TCG_AREG0 (fp -> s0)Stefan Weil1-2/+3
Register fp (frame pointer) is a bad choice for compilations without optimisation, because the compiler makes heavy use of this register (so the resulting code crashes). Register s0 had been used for TCG_AREG1 in earlier releases, but was no longer used and is now free for TCG_AREG0. The resulting code works for compilations without optimisation (tested with qemu mips in qemu mips on x86 host). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-05tcg/mips: use seb/seh instructions on MIPS32R2Aurelien Jarno1-6/+39
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-05tcg/mips: fix 64-bit linux-user on big endian MIPSAurelien Jarno1-4/+4
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-05Split TLB addend and target_phys_addr_tPaul Brook1-2/+2
Historically the qemu tlb "addend" field was used for both RAM and IO accesses, so needed to be able to hold both host addresses (unsigned long) and guest physical addresses (target_phys_addr_t). However since the introduction of the iotlb field it has only been used for RAM accesses. This means we can change the type of addend to unsigned long, and remove associated hacks in the big-endian TCG backends. We can also remove the host dependence from target_phys_addr_t. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-29tcg/mips: fix branch offset during retranslationAurelien Jarno1-19/+30
Branch offsets should only be overwritten during relocation, to support partial retranslation. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-27tcg-mips: add guest base supportAurelien Jarno1-29/+36
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-27tcg/mips: implement the not_i32 op the same way as gccAurelien Jarno1-1/+1
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-27tcg-mips: implement norAurelien Jarno1-0/+4
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26tcg: Disambiguate qemu_ld32u with 32-bit and 64-bit outputs.Richard Henderson1-3/+3
Some targets (e.g. Alpha and MIPS64) need to keep 32-bit operands sign-extended in 64-bit registers (regardless of the "real" sign of the operand). For that, we need to be able to distinguish between a 32-bit load with a 32-bit result and a 32-bit load with a given extension to a 64-bit result. This distinction already exists for the ld* loads, but not the qemu_ld* loads. Reserve qemu_ld32u for 64-bit outputs and introduce qemu_ld32 for 32-bit outputs. Adjust all code generators to match. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-26tcg: Use TCGCond where appropriate.Richard Henderson1-4/+4
Use the TCGCond enumeration type in the brcond and setcond related prototypes in tcg-op.h and each code generator. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-19 06:43:51 +0000