summaryrefslogtreecommitdiff
path: root/tcg/mips
AgeCommit message (Collapse)AuthorFilesLines
2013-10-10tcg: Add qemu_ld_st_i32/64Richard Henderson1-0/+2
Step two in the transition, adding the new ldst opcodes. Keep the old opcodes around until all backends support the new opcodes. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add tcg-be-null.hRichard Henderson1-0/+2
This is a no-op backend data implementation, for those targets that are not currently using the load/store optimization path. This is prepatory to always requiring these functions in all backends. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-03Merge branch 'tcg-next' of git://github.com/rth7680/qemuAurelien Jarno2-15/+23
* 'tcg-next' of git://github.com/rth7680/qemu: (29 commits) tcg-i386: Make use of zero-extended memory helper routines tcg: Introduce zero and sign-extended versions of load helpers exec: Split softmmu_defs.h target: Include softmmu_exec.h where forgotten exec: Rename USUFFIX to LSUFFIX tcg-i386: Don't perform GETPC adjustment in TCG code exec: Reorganize the GETRA/GETPC macros configure: Allow x32 as a host tcg-i386: Adjust tcg_out_tlb_load for x32 tcg-i386: Use intptr_t appropriately tcg: Fix jit debug for x32 tcg: Use appropriate types in tcg_reg_alloc_call tcg: Change tcg_out_ld/st offset to intptr_t tcg: Change tcg_gen_exit_tb argument to uintptr_t tcg: Use uintptr_t in TCGHelperInfo tcg: Change relocation offsets to intptr_t tcg: Change memory offsets to intptr_t tcg: Change frame pointer offsets to intptr_t tcg: Define TCG_ptr properly tcg: Define TCG_TYPE_PTR properly ...
2013-09-03tcg/mips: only enable ext8s/ext16s ops on MIPS32R2Aurelien Jarno2-4/+4
On MIPS ext8s and ext16s ops are implemented with a dedicated instruction only on MIPS32R2, otherwise the same kind of implementation than at TCG level (shift left followed by shift right) is used. Change that by only implementing the ext8s and ext16s ops on MIPS32R2 so that optimizations can be done by the optimizer. Use an inline version to avoid having to test again for MIPS32R2 instructions. Keep the shift implementation for the ld/st routines. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-03tcg/mips: inline bswap16/bswap32 opsAurelien Jarno1-4/+3
Use an inline version for the bswap16 and bswap32 ops to avoid testing for MIPS32R2 instructions availability, as these ops are only available in that case. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-03tcg/mips: detect available host instructions at runtimeAurelien Jarno2-92/+171
Now that TCG supports enabling and disabling ops at runtime, it's possible to detect the available host instructions at runtime, and enable the corresponding ops accordingly. Unfortunately it's not easy to probe for available instructions on MIPS, the information is partially available in /proc/cpuinfo, and not available in AUXV. This patch therefore probes for the instructions by trying to execute them and by catching a possible SIGILL signal. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-02exec: Split softmmu_defs.hRichard Henderson1-3/+0
The _cmmu helpers can be moved to exec-all.h. The helpers that are used from TCG will shortly need access to tcg_target_long so move their declarations into tcg.h. This requires minor include adjustments to all TCG backends. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change tcg_out_ld/st offset to intptr_tRichard Henderson1-2/+2
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change relocation offsets to intptr_tRichard Henderson1-8/+8
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change flush_icache_range arguments to uintptr_tRichard Henderson1-2/+1
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg-mips: Implement mulsh, muluhRichard Henderson2-2/+12
With the optimization in tcg_liveness_analysis, we can avoid the MFLO when it is unused. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Add muluh and mulsh opcodesRichard Henderson1-0/+2
Use them in places where mulu2 and muls2 are used. Optimize mulx2 with dead low part to mulxh. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-08-08tcg/mips: fix invalid op definition errorsJames Hogan1-0/+10
tcg/mips/tcg-target.h defines various operations conditionally depending upon the isa revision, however these operations are included in mips_op_defs[] unconditionally resulting in the following runtime errors if CONFIG_DEBUG_TCG is defined: Invalid op definition for movcond_i32 Invalid op definition for rotl_i32 Invalid op definition for rotr_i32 Invalid op definition for deposit_i32 Invalid op definition for bswap16_i32 Invalid op definition for bswap32_i32 tcg/tcg.c:1196: tcg fatal error Fix with ifdefs like the i386 backend does for movcond_i32. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-09tcg: Split rem requirement from div requirementRichard Henderson1-0/+1
There are several hosts with only a "div" insn. Remainder is computed manually from the quotient and inputs. We can do this generically. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-04-01tcg/mips: Implement muls2_i32Aurelien Jarno2-1/+7
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-02-23tcg: Add signed multiword multiplication operationsRichard Henderson1-0/+1
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-19exec: move include files to include/exec/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19janitor: add guards to headersPaolo Bonzini1-0/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-30tcg/mips: use MUL instead of MULT on MIPS32 and aboveAurelien Jarno1-0/+7
MIPS32 and later instruction sets have a multiplication instruction directly operating on GPRs. It only produces a 32-bit result but it is exactly what is needed by QEMU. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-12tcg: Remove TCG_TARGET_HAS_GUEST_BASE definePeter Maydell1-3/+0
GUEST_BASE support is now supported by all TCG backends, and is now mandatory. Drop the now-pointless TCG_TARGET_HAS_GUEST_BASE define (set by every backend) and the error if it is unset. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-10-06tcg: remove obsolete jmp opAurelien Jarno1-5/+0
The TCG jmp operation doesn't really make sense in the QEMU context, it is unused, it is not implemented by some targets, and it is wrongly implemented by some others. This patch simply removes it. Reviewed-by: Richard Henderson <rth@twiddle.net> Acked-by: Blue Swirl <blauwirbel@gmail.com> Acked-by: Stefan Weil<sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-26tcg/mips: fix MIPS32(R2) detectionAurelien Jarno2-9/+9
Fix the MIPS32(R2) cpu detection so that it also works with -march=octeon. Thanks to Andrew Pinski for the hint. Cc: Andrew Pinski <apinski@cavium.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22Revert "tcg/mips"Aurelien Jarno1-2/+2
This reverts commit ad49d1f75115663731bfe06dec61eed6775526ad. This commit was not supposed to be pushed. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mipsAurelien Jarno1-2/+2
2012-09-22tcg: Remove tcg_target_get_call_iarg_regs_countStefan Weil1-6/+0
The TCG targets no longer need individual implementations. Since commit 6a18ae2d2947532d5c26439548afa0481c4529f9, 'flags' is no longer used in tcg_target_get_call_iarg_regs_count. The remaining tcg_target_get_call_iarg_regs_count is trivial and only called once. Therefore the patch eliminates it completely. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: implement movcond op on MIPS32R2Aurelien Jarno2-0/+77
movcond operation can be implemented on MIPS32 Release 2 using the MOVN, MOVZ, SLT and SLTU instructions. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: implement deposit op on MIPS32R2Aurelien Jarno2-1/+10
deposit operations can be optimized on MIPS32 Release 2 using the INS instruction. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: implement rotl/rotr ops on MIPS32R2Aurelien Jarno2-1/+22
rotr operations can be optimized on MIPS32 Release 2 using the ROTR and ROTRV instructions. Also implemented rotl operations by subtracting the shift from 32. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: optimize bswap{16,16s,32} on MIPS32R2Aurelien Jarno2-7/+38
bswap operations can be optimized on MIPS32 Release 2 using the ROTR, WSBH and SEH instructions. We can't use the non-R2 code to implement the ops due to registers constraints, so don't define the corresponding TCG_TARGET_HAS_bswap* values. Also bswap16* operations are supposed to be called with the 16 high bits zeroed. This is the case everywhere (including for TCG by definition) except when called from the store helper. Remove the AND instructions from bswap16* and move it there. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: optimize brcond arg, 0Aurelien Jarno1-8/+30
MIPS has some conditional branch instructions when comparing with zero. Use them. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: use stack for TCG tempsAurelien Jarno1-4/+6
Use stack instead of temp_buf array in CPUState for TCG temps. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: don't use global pointerAurelien Jarno1-1/+1
Don't use the global pointer in TCG, in case helpers try access global variables. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: use TCGArg or TCGReg instead of intAurelien Jarno1-28/+35
Instead of int, use the correct TCGArg and TCGReg type: TCGReg when representing a TCG target register, TCGArg when representing the latter or a constant. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg/mips: kill warnings in user modeAurelien Jarno1-41/+43
Recent versions of GCC emit warnings when compiling user mode targets. Kill them by reordering a bit the #ifdef. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22tcg-mips: fix wrong usage of 'Z' constraintAurelien Jarno1-8/+8
The 'Z' constraint has been introduced to map the zero register. However when the op also accept a constant, there is no point to accept the zero register in addition. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21tcg: Introduce movcondRichard Henderson1-0/+1
Implemented with setcond if the target does not provide the optional opcode. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-15Remove unused CONFIG_TCG_PASS_AREG0 and dead codeBlue Swirl2-29/+3
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets, remove dead code and support for !CONFIG_TCG_PASS_AREG0 case. Remove dyngen-exec.h and all references to it. Although included by hw/spapr_hcall.c, it does not seem to use it. Remove unused HELPER_CFLAGS. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-08-28tcg/mips: fix broken CONFIG_TCG_PASS_AREG0 codeAurelien Jarno1-59/+99
The CONFIG_TCG_PASS_AREG0 code for calling ld/st helpers was broken in that it did not respect the ABI requirement that 64 bit values were passed in even-odd register pairs. The simplest way to fix this is to implement some new utility functions for marshalling function arguments into the correct registers and stack, so that the code which sets up the address and data arguments does not need to care whether there has been a preceding env argument. Based on commit 9716ef3b for ARM by Peter Maydell. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-18softmmu templates: optionally pass CPUState to memory access functionsBlue Swirl1-0/+44
Optionally, make memory access helpers take a parameter for CPUState instead of relying on global env. On most targets, perform simple moves to reorder registers. On i386, switch from regparm(3) calling convention to standard stack-based version. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-14Rename CPUState -> CPUArchStateAndreas Färber1-7/+7
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-03w64: Change data type of parameters for flush_icache_rangeStefan Weil1-1/+2
The TCG targets i386 and tci needed a change of the function prototype for w64. This change is currently not needed for the other TCG targets, but it can be applied to avoid code differences. Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-11-14tcg: Use TCGReg for standard tcg-target entry points.Richard Henderson1-6/+7
Including tcg_out_ld, tcg_out_st, tcg_out_mov, tcg_out_movi. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-14tcg: Standardize on TCGReg as the enum for hard registersRichard Henderson1-2/+2
Most targets did not name the enum; tci used TCGRegister. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-01tcg: Don't declare TCG_TARGET_REG_BITS in tcg-target.hStefan Weil1-1/+0
It is now declared for all tcg targets in tcg.h, so the tcg target specific declarations are redundant. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-21tcg: Always define all of the TCGOpcode enum members.Richard Henderson1-15/+16
By always defining these symbols, we can eliminate a lot of ifdefs. To allow this to be checked reliably, the semantics of the TCG_TARGET_HAS_* macros must be changed from def/undef to true/false. This allows even more ifdefs to be removed, converting them into C if statements. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20tcg/mips: Fix regression caused by typo (copy + paste bug)Stefan Weil1-1/+1
cppcheck reports an error: qemu/tcg/mips/tcg-target.c:1487: error: Invalid number of character (() The unpatched code won't compile on mips hosts starting with commit cea5f9a28faa528b6b1b117c9ab2d8828f473fef. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26Delegate setup of TCG temporaries to targetsBlue Swirl1-0/+2
Delegate TCG temp_buf setup to targets, so that they can use a stack frame later instead. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26cpu-exec.c: avoid AREG0 useBlue Swirl1-5/+3
Make functions take a parameter for CPUState instead of relying on global env. Pass CPUState pointer to TCG prologue, which moves it to AREG0. Thanks to Peter Maydell and Laurent Desnogues for the ARM prologue change. Revert the hacks to avoid AREG0 use on Sparc hosts. Move cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h. Compile the file without HELPER_CFLAGS. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-03Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD.Brad1-0/+4
Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD to fix compilation of the MIPS host support for OpenBSD/mips64 based architecures. Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-12tcg arm/mips/ia64: add a comment about retranslation and cachesAurelien Jarno1-1/+3
Add a comment about cache coherency and retranslation, so that people developping new targets based on existing ones are warned of the issue. Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.1 (git 2.18.0) at 2024-05-14 14:09:51 +0000