summaryrefslogtreecommitdiff
path: root/tests/ahci-test.c
AgeCommit message (Collapse)AuthorFilesLines
2016-01-29ide: Clean up includesPeter Maydell1-3/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-17-git-send-email-peter.maydell@linaro.org
2016-01-11qtest/ahci: ATAPI data testsJohn Snow1-0/+97
Simple I/O tests for DMA and PIO pathways in the AHCI HBA. I believe at this point in time all of the common, major IO pathways in BMDMA and AHCI are covered by qtests now. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1452282920-21550-9-git-send-email-jsnow@redhat.com
2016-01-11libqos/ahci: allow nondata commands for ahci_io variantsJohn Snow1-12/+2
These variants try to set a data offset, even if you don't specify one. In the cases where the offset is zero and it's a nondata command, just ignore the instruction. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1452282920-21550-7-git-send-email-jsnow@redhat.com
2016-01-11libqos: allow zero-size allocationsJohn Snow1-7/+1
As part of streamlining the AHCI tests interface, it'd be nice if specying a size of zero could be handled without special branches and the allocator could handle this special case gracefully. This lets me use the "ahci_io" macros for non-data commands, too, which moves me forward towards shepherding all AHCI qtests into a common set of commands in a unified pipeline. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1452282920-21550-6-git-send-email-jsnow@redhat.com
2016-01-11libqos/ahci: ATAPI identifyJohn Snow1-1/+7
We need to say "hello!" to our ATAPI friends in a slightly different manner. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1452282920-21550-4-git-send-email-jsnow@redhat.com
2016-01-11ahci-test: fix memory leakJohn Snow1-2/+2
Use the proper free command to detroy an AHCICommand. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1452282920-21550-2-git-send-email-jsnow@redhat.com
2015-11-13qtest/ahci: use raw format when qemu-img is absentJohn Snow1-9/+32
If we don't have the qemu-img tool, use the raw format for tests and skip the high-sector LBA48 tests. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1447439479-16775-4-git-send-email-jsnow@redhat.com
2015-11-13qtest/ahci: always specify image formatJohn Snow1-22/+29
Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1447439479-16775-2-git-send-email-jsnow@redhat.com
2015-11-13ahci/qtest: don't use tcp sockets for migration testsJohn Snow1-5/+20
Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1447108074-20609-1-git-send-email-jsnow@redhat.com
2015-09-18qtest/ahci: export generate_patternJohn Snow1-26/+0
Share the pattern function for ide and ahci test. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1441926555-19471-3-git-send-email-jsnow@redhat.com
2015-09-18qtest/ahci: use generate_pattern everywhereJohn Snow1-17/+6
Fix the pattern generation to actually be interesting, and make sure all buffers in the ahci-test actually use it. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1441926555-19471-2-git-send-email-jsnow@redhat.com
2015-07-04qtest/ahci: halted ncq migration testJohn Snow1-4/+15
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435767578-32743-15-git-send-email-jsnow@redhat.com
2015-07-04qtest/ahci: halted NCQ testJohn Snow1-4/+15
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435767578-32743-10-git-send-email-jsnow@redhat.com
2015-07-04qtest/ahci: ncq migration testJohn Snow1-4/+15
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435016308-6150-17-git-send-email-jsnow@redhat.com
2015-07-04qtest/ahci: simple ncq data testJohn Snow1-0/+13
Test the NCQ pathways for a simple IO RW test. Also, test that libqos doesn't explode when running NCQ commands :) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435016308-6150-16-git-send-email-jsnow@redhat.com
2015-07-04ahci/qtest: Execute IDENTIFY prior to data commandsJohn Snow1-0/+6
If you try to execute an NCQ command before trying to engage with the device by issuing an IDENTIFY command, the error bits that are part of the signature will fool the test suite into thinking there was a failure. Issue IDENTIFY first on "boot", which will clear the signature out of the registers for us. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435016308-6150-9-git-send-email-jsnow@redhat.com
2015-07-04qtest/ahci: add port_reset testJohn Snow1-0/+24
Test that we can survive a couple of cycles of running a basic identify test, some IO, and resetting the HBA. Ensures that we can bring the HBA back to compliant spec during the lifecycle of the VM. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1434470575-21625-5-git-send-email-jsnow@redhat.com
2015-07-04qtest/ahci: add test_maxJohn Snow1-5/+45
Test that the FIS delivered after a nondata command has appropriately updated registers, just as we'd expect a data command to do. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1434470575-21625-3-git-send-email-jsnow@redhat.com
2015-06-19tests: Use qtest_add_data_func() consistentlyAndreas Färber1-7/+2
Replace uses of g_test_add_data_func() for QTest test cases. It is still valid to use it for any non-QTest test cases, which are not run for multiple target binaries. Suggested-by: John Snow <jsnow@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-05-22libqos/ahci: Swap memread/write with bufread/writeJohn Snow1-4/+4
Where it makes sense, use the new faster primitives. For generally small reads/writes such as for the PRDT and FIS packets, stick with the more wasteful but easier to debug memread/memwrite. For ahci-test (before migration tests): With this patch: real 0m3.675s user 0m2.582s sys 0m1.718s Without any qtest protocol improvements: real 0m14.171s user 0m12.072s sys 0m12.527s Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1430864578-22072-6-git-send-email-jsnow@redhat.com
2015-05-22qtest/ahci: add migrate halted dma testJohn Snow1-1/+74
Test migrating a halted DMA transaction. Resume, then test data integrity. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1430417242-11859-10-git-send-email-jsnow@redhat.com
2015-05-22qtest/ahci: add halted dma testJohn Snow1-0/+60
If we're going to test the migration of halted DMA jobs, we should probably check to make sure we can resume them locally as a first step. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1430417242-11859-9-git-send-email-jsnow@redhat.com
2015-05-22qtest/ahci: add flush migrate testJohn Snow1-1/+51
Use blkdebug to inject an error on first flush, then attempt to flush on the first guest. When the error halts the VM, migrate to the second VM, and attempt to resume the command. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1430417242-11859-8-git-send-email-jsnow@redhat.com
2015-05-22qtest/ahci: add migrate dma testJohn Snow1-0/+45
Write to one guest, migrate, and then read from the other. adjust ahci_io to clear any buffers it creates, so that we can use ahci_io safely on both guests knowing we are using empty buffers and not accidentally re-using data. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1430417242-11859-7-git-send-email-jsnow@redhat.com
2015-05-22qtest/ahci: Add migration testJohn Snow1-0/+90
Notes: * The migration is performed on QOSState objects. * The migration is performed in such a way that it does not assume consistency between the allocators attached to each. That is to say, you can use each QOSState object completely independently and then at an arbitrary point decide to migrate, and the destination object will now be consistent with the memory within the source guest. The source object that was migrated from will have a completely blank allocator. ahci-test.c: - verify_state is added - ahci_migrate is added as a frontend to migrate - test_migrate_sanity test case is added. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1430417242-11859-6-git-send-email-jsnow@redhat.com
2015-04-28qtest/ahci: add flush retry testJohn Snow1-0/+44
Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1426018503-821-7-git-send-email-jsnow@redhat.com
2015-04-28qtest/ahci: Allow override of default CLI optionsJohn Snow1-22/+45
Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1426018503-821-3-git-send-email-jsnow@redhat.com
2015-04-28qtest/ahci: Add simple flush testJohn Snow1-0/+34
Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1426018503-821-2-git-send-email-jsnow@redhat.com
2015-04-28qtest/ahci: test different disk sectorsJohn Snow1-13/+55
Test sector offset 0, 1, and the last sector(s) in LBA28 and LBA48 modes. Signed-off-by: John Snow <jsnow@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1426274523-22661-3-git-send-email-jsnow@redhat.com
2015-04-28qtest/ahci: add qcow2 support to ahci-testJohn Snow1-10/+6
This will enable the testing of high offsets without wasting a lot of disk space, and does not impact the previous tests. mkimg and mkqcow2 are added to libqos for other tests. Signed-off-by: John Snow <jsnow@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1426274523-22661-2-git-send-email-jsnow@redhat.com
2015-03-23ahci-test: improve rw buffer patternsJohn Snow1-8/+28
My pattern was cyclical every 256 bytes, so it missed a fairly obvious failure case. Add some rand() pepper into the test pattern, and for large patterns that exceed 256 sectors, start writing an ID per-sector so that we never generate identical sector patterns. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Message-id: 1426811056-2202-5-git-send-email-jsnow@redhat.com
2015-03-19qtest/ahci: Fix a bit mask expressionJohn Snow1-1/+1
A thinko that clang 3.5.0 caught. Thankfully does not introduce any new failures. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10qtest/ahci: add fragmented dma testJohn Snow1-0/+59
Test what happens when we try to use extremely short PRDTs to accomplish a small data transfer. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424905602-24715-7-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qtest/ahci: Add PIO and LBA48 testsJohn Snow1-22/+134
In addition to DMA tests, test PIO and LBA48 command pathways in AHCI. To accomplish this, a primitive multiplexer for gtest is added. Though guests may prefer not to issue PIO commands directly except for single sector cases during early boot and shutdown, these pathways are still used for the transfer of ATAPI commands as well, and should be behaving well. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424905602-24715-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qtest/ahci: Add DMA test variantsJohn Snow1-6/+28
These test a few different pathways in the AHCI code. short: Test the minimum transfer size, exactly one sector. simple: Test a transfer using a single PRD, in this case, 4K. double: Test transferring 8K, which we will split up as two PRDs. long: Test transferring a lot of data using many PRDs, 256K. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424905602-24715-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10qtest/ahci: Add a macro bootup routineJohn Snow1-6/+17
Add a routine that can be used to engage the AHCI device at a not-granular level so that bringing up the functionality of the HBA is easy in future tests that are not concerned with testing the bring-up process. Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1424905602-24715-3-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-16qtest/ahci: Adding simple dma read-write testJohn Snow1-0/+55
Adds a test case for AHCI wherein we write a 4K block of a changing pattern to sector 0, then read back that 4K and compare the transmit and receive buffers. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1423158090-25580-20-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: Assert sector size in identify testJohn Snow1-0/+4
A minor sanity check to assert that the sector size is 512. The current block layer code deeply assumes that the IDE sector size will be 512 bytes, so we carry forward that assumption here. This is useful for the DMA tests, which currently assume that a sector will always be 512 bytes. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-19-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add ahci_clean_memJohn Snow1-0/+3
Clean up guest memory being used in ahci_clean_mem, to be called during ahci_shutdown. With all guest memory leaks removed, add an option to the allocator to throw an assertion if a leak occurs. This test adds some sanity to both the AHCI library and the allocator. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-18-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: add ahci_ioJohn Snow1-38/+25
ahci_io is a wrapper around ahci_guest_io that takes a pointer to host memory instead, and will create a guest memory buffer and copy the data to/from as needed and as appropriate for a read/write command, such that after a read, the guest data will be in a host buffer, and for a write, the data will be transmitted to guest memory prior to the block operation. Now that we have all the syntactic sugar functions in place for AHCI, we can convert the identify test to be very, very short. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-17-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: add ahci command verifyJohn Snow1-14/+2
Helps to verify that a command completed successfully. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-14-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: add ahci command functionsJohn Snow1-56/+17
This patch adds the AHCICommand structure, and a set of functions to operate on the structure. ahci_command_create - Initialize and create a new AHCICommand in memory ahci_command_free - Destroy this object. ahci_command_set_buffer - Set where the guest memory DMA buffer is. ahci_command_commit - Write this command to the AHCI HBA. ahci_command_issue - Issue the committed command synchronously. ahci_command_issue_async - Issue the committed command asynchronously. ahci_command_wait - Wait for an asynchronous command to finish. ahci_command_slot - Get the number of the command slot we committed to. Helpers: size_to_prdtl - Calculate the required minimum PRDTL size from a buffer size. ahci_command_find - Given an ATA command mnemonic, look it up in the properties table to obtain info about the command. command_header_init - Initialize the command header with sane values. command_table_init - Initialize the command table with sane values. [Peter Maydell <peter.maydell@linaro.org> reported the following clang warning: tests/libqos/ahci.c:598:3: warning: redefinition of typedef 'AHCICommand' is a C11 feature [-Wtypedef-redefinition] } AHCICommand; I have replaced typedef struct ... AHCICommand; with struct ... ; --Stefan] Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1423158090-25580-13-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: add ahci_write_fisJohn Snow1-1/+1
Similar to ahci_set_command_header, add a helper that takes an in-memory representation of a command FIS and writes it to guest memory, handling endianness as-needed. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1423158090-25580-11-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: Demagic ahci tests.John Snow1-6/+6
Add human-readable command names and other miscellaneous #defines to help make the code more readable. Some of these definitions are not yet used in this current series, but for convenience and sanity they have been lumped together here, as it's more trouble than it is worth in a test suite to hand-pick, one-by-one, which preprocessor definitions are useful per-each test. These definitions include: ATA Command Mnemonics Current expected AHCI sector size FIS magic bytes REG_H2D_FIS flags Command Header flags Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1423158090-25580-10-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add cmd response sanity check helpersJohn Snow1-25/+4
This patch adds a few helpers to help sanity-check the response of the AHCI device after a command. ahci_d2h_check_sanity inspects the D2H Register FIS, ahci_pio_check_sanity inspects the PIO Setup FIS, and ahci_cmd_check_sanity inspects the command header. To support the PIO sanity check, a new structure is added for the PIO Setup FIS type. Existing FIS types (H2D and D2H) have had their members renamed slightly to condense reserved members into fewer fields; and LBA fields are now represented by arrays of 8 byte chunks instead of independent variables. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-9-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add port_check_nonbusy helperJohn Snow1-0/+1
A simple helper that asserts a given port is not busy processing any commands via the TFD, Command Issue and SACT registers. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-8-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add ahci_port_check_interrupts helperJohn Snow1-11/+2
A helper that compares a given port's current interrupts and checks them against a supplied list of expected interrupt bits, and throws an error if they do not match. The helper then resets the requested interrupts on this port, and asserts that the interrupt register is now empty. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-7-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add ahci_port_check_error helperJohn Snow1-7/+1
ahci_port_check_error checks a given port's error registers and asserts that everything from the port-level view is still OK. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423158090-25580-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16libqos/ahci: Add command header helpersJohn Snow1-20/+23
Adds command header helper functions: -ahci_command_header_set -ahci_command_header_get, -ahci_command_destroy, and -ahci_cmd_pick These helpers help to quickly manage the command header information in the AHCI device. ahci_command_header_set and get will store or retrieve an AHCI command header, respectively. ahci_cmd_pick chooses the first available but least recently used command slot to allow us to cycle through the available command slots. ahci_command_destroy obliterates all information contained within a given slot's command header, and frees its associated command table, but not its DMA buffer! Lastly, the command table pointer fields (dba and dbau) are merged into a single 64bit value to make managing 64bit tests simpler. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1423158090-25580-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-16qtest/ahci: rename 'Command' to 'CommandHeader'John Snow1-4/+4
The structure name is a bit of a misnomer; the structure currently named command is actually the commandheader. A future patch in this series will add an actual "Command" structure, so we'll rename it now before the rest of the functions in this series try to use it. In addition, rename the "b1" and "b2" fields to be a unified uint16_t named "flags." Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1423158090-25580-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-14 15:11:46 +0000