summaryrefslogtreecommitdiff
path: root/util
AgeCommit message (Collapse)AuthorFilesLines
2016-08-05tcg: Lower indirect registers in a separate passRichard Henderson1-2/+3
Rather than rely on recursion during the middle of register allocation, lower indirect registers to loads and stores off the indirect base into plain temps. For an x86_64 host, with sufficient registers, this results in identical code, modulo the actual register assignments. For an i686 host, with insufficient registers, this means that temps can be (temporarily) spilled to the stack in order to satisfy an allocation. This as opposed to the possibility of not being able to spill, to allocate a register for the indirect base, in order to perform a spill. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-08-05tcg: Include liveness info in the dumpsRichard Henderson1-6/+13
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-08-05throttle: Don't allow burst limits to be lower than the normal limitsAlberto Garcia1-0/+5
Setting FOO_max to a value that is lower than FOO does not make sense, and it produces odd results depending on the value of FOO_max_length. Although the user should not set that configuration in the first place it's better to reject it explicitly. https://bugzilla.redhat.com/show_bug.cgi?id=1355665 Signed-off-by: Alberto Garcia <berto@igalia.com> Reported-by: Gu Nini <ngu@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 663d5aca406060e31f80d8113f77b6feee63b919.1469693110.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-03util: Fix assertion in iov_copy() upon zero 'bytes' and non-zero 'offset'Shmulik Ladkani1-1/+2
In cases where iov_copy() is passed with zero 'bytes' argument and a non-zero 'offset' argument, nothing gets copied - as expected. However no copy iterations are performed, so 'offset' is left unaltered, leading to the final assert(offset == 0) to fail. Instead, change the loop condition to continue as long as 'offset || bytes', similar to other iov_* functions. This ensures 'offset' gets zeroed (even if no actual copy is made), unless it is beyond end of source iov - which is asserted. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com> Message-Id: <1470130880-1050-1-git-send-email-shmulik.ladkani@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-03qdist: return "(empty)" instead of NULL when printing an empty distEmilio G. Cota1-2/+4
Printf'ing a NULL string is undefined behaviour. Avoid it. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1469459025-23606-4-git-send-email-cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-03qdist: use g_renew and g_new instead of g_realloc and g_malloc.Emilio G. Cota1-4/+3
This is safer against overflow. g_renew is available in all version of glib, while g_realloc_n is only available in 2.24. Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1469459025-23606-3-git-send-email-cota@braap.org> [Rewritten to use g_new/g_renew. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-02qdist: fix memory leak during binningEmilio G. Cota1-1/+1
In qdist_bin__internal(), to->entries is initialized to a 1-element array, which we then leak when n == from->n. Fix it. Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1469459025-23606-2-git-send-email-cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-02qht: do not segfault when gathering stats from an uninitialized qhtEmilio G. Cota1-1/+6
So far, QHT functions assume that the passed qht has previously been initialized--otherwise they segfault. This patch makes an exception for qht_statistics_init, with the goal of simplifying calling code. For instance, qht_statistics_init is called from the 'info jit' dump, and given that under KVM the TB qht is never initialized, we get a segfault. Thus, instead of complicating the 'info jit' code with additional checks, let's allow passing an uninitialized qht to qht_statistics_init. While at it, add a test for this to test-qht. Before the patch (for $ qemu -enable-kvm [...]): (qemu) info jit [...] direct jump count 0 (0%) (2 jumps=0 0%) Program received signal SIGSEGV, Segmentation fault. After the patch the "TB hash buckets", "TB hash occupancy" and "TB hash avg chain" lines are omitted. (qemu) info jit [...] direct jump count 0 (0%) (2 jumps=0 0%) TB hash buckets 0/0 (-nan% head buckets used) TB hash occupancy nan% avg chain occ. Histogram: (null) TB hash avg chain nan buckets. Histogram: (null) [...] Reported by: Changlong Xie <xiecl.fnst@cn.fujitsu.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1469205390-14369-1-git-send-email-cota@braap.org> [Extract printing statistics to an entirely separate function. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-02util: Drop inet_listen()Cao jin1-28/+0
Since commit e65c67e4, inet_listen() is not used anymore, and all inet listen operation goes through QIOChannel. Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Eric Blake <eblake@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Message-Id: <1469451771-1173-3-git-send-email-caoj.fnst@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-02util: drop unix_nonblocking_connect()Cao jin1-16/+0
It is never used; all nonblocking connect now goes through socket_connect(), which calls unix_connect_addr(). Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Message-Id: <1469097213-26441-3-git-send-email-caoj.fnst@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-02util: drop inet_nonblocking_connect()Cao jin1-30/+0
It is never used; all nonblocking connect now goes through socket_connect(), which calls inet_connect_addr(). Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Message-Id: <1469097213-26441-2-git-send-email-caoj.fnst@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-02fix qemu exit on memory hotplug when allocation fails at prealloc timeIgor Mammedov2-14/+14
When adding hostmem backend at runtime, QEMU might exit with error: "os_mem_prealloc: Insufficient free host memory pages available to allocate guest RAM" It happens due to os_mem_prealloc() not handling errors gracefully. Fix it by passing errp argument so that os_mem_prealloc() could report error to callers and undo performed allocation when os_mem_prealloc() fails. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1469008443-72059-1-git-send-email-imammedo@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-02util/qht: Document memory ordering assumptionsPaolo Bonzini1-1/+6
It is naturally expected that some memory ordering should be provided around qht_insert() and qht_lookup(). Document these assumptions in the header file and put some comments in the source to denote how that memory ordering requirements are fulfilled. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [Sergey Fedorov: commit title and message provided; comment on qht_remove() elided] Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-Id: <20160715175852.30749-2-sergey.fedorov@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-17use g_path_get_dirname instead of dirnameWei Jiangang1-1/+3
Use g_path_get_basename to get the directory components of a file name, and free its return when no longer needed. Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com> Message-Id: <1459997185-15669-3-git-send-email-weijg.fnst@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-14target-arm: Use Neon for zero checkingVijay1-0/+7
Use Neon instructions to perform zero checking of buffer. This is helps in reducing total migration time. Use case: Idle VM live migration with 4 VCPUS and 8GB ram running CentOS 7. Without Neon, the Total migration time is 3.5 Sec Migration status: completed total time: 3560 milliseconds downtime: 33 milliseconds setup: 5 milliseconds transferred ram: 297907 kbytes throughput: 685.76 mbps remaining ram: 0 kbytes total ram: 8519872 kbytes duplicate: 2062760 pages skipped: 0 pages normal: 69808 pages normal bytes: 279232 kbytes dirty sync count: 3 With Neon, the total migration time is 2.9 Sec Migration status: completed total time: 2960 milliseconds downtime: 65 milliseconds setup: 4 milliseconds transferred ram: 299869 kbytes throughput: 830.19 mbps remaining ram: 0 kbytes total ram: 8519872 kbytes duplicate: 2064313 pages skipped: 0 pages normal: 70294 pages normal bytes: 281176 kbytes dirty sync count: 3 Signed-off-by: Vijaya Kumar K <vijayak@cavium.com> Signed-off-by: Suresh <ksuresh@cavium.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1467190029-694-2-git-send-email-vijayak@cavium.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-14Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+1
* SCSI scanner support * fixes to qemu-char and net exit * FreeBSD fixes * Other small bugfixes # gpg: Signature made Wed 13 Jul 2016 12:30:11 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: hostmem: detect host backend memory is being used properly hostmem: fix QEMU crash by 'info memdev' char: do not use atexit cleanup handler net: do not use atexit for cleanup slirp: use exit notifier for slirp_smb_cleanup tap: use an exit notifier to call down_script util: Fix MIN_NON_ZERO qemu-sockets: use qapi_free_SocketAddress in cleanup disas: avoid including everything in headers compiled from C++ json-streamer: fix double-free on exiting during a parse main-loop: check return value before using pointer Use "-s" instead of "--quiet" to resolve non-fatal build error on FreeBSD. scsi-bus: Use longer sense buffer with scanners scsi-bus: Add SCSI scanner support Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-13coroutine: move entry argument to qemu_coroutine_createPaolo Bonzini4-8/+8
In practice the entry argument is always known at creation time, and it is confusing that sometimes qemu_coroutine_enter is used with a non-NULL argument to re-enter a coroutine (this happens in block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value at creation time, for consistency with e.g. aio_bh_new. Mostly done with the following semantic patch: @ entry1 @ expression entry, arg, co; @@ - co = qemu_coroutine_create(entry); + co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry2 @ expression entry, arg; identifier co; @@ - Coroutine *co = qemu_coroutine_create(entry); + Coroutine *co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry3 @ expression entry, arg; @@ - qemu_coroutine_enter(qemu_coroutine_create(entry), arg); + qemu_coroutine_enter(qemu_coroutine_create(entry, arg)); @ reentry @ expression co; @@ - qemu_coroutine_enter(co, NULL); + qemu_coroutine_enter(co); except for the aforementioned few places where the semantic patch stumbled (as expected) and for test_co_queue, which would otherwise produce an uninitialized variable warning. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13coroutine: use QSIMPLEQ instead of QTAILQPaolo Bonzini2-12/+12
CoQueue do not need to remove any element but the head of the list; processing is always strictly FIFO. Therefore, the simpler singly-linked QSIMPLEQ can be used instead. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13osdep: Introduce qemu_dupFam Zheng1-8/+15
And use it in qemu_dup_flags. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-12qemu-sockets: use qapi_free_SocketAddress in cleanupMarc-André Lureau1-1/+1
Commit 74b6ce43e3 uses the wrong free API for a SocketAddress, that may leak some linked data. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20160706164246.22116-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-12Drop Emacs local variables lists redundant with .dir-locals.elMarkus Armbruster1-9/+0
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12Use #include "..." for our own headers, <...> for othersMarkus Armbruster2-2/+3
Tracked down with an ugly, brittle and probably buggy Perl script. Also move includes converted to <...> up so they get included before ours where that's obviously okay. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-06sockets: Use new QAPI cloningEric Blake1-23/+0
Rather than rolling our own clone via an expensive conversion in and back out of QObject, use the new clone visitor. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-15-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06qapi: Add new visit_complete() functionEric Blake1-4/+2
Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06qmp-output-visitor: Favor new visit_free() functionEric Blake1-1/+1
Now that we have a polymorphic visit_free(), we no longer need qmp_output_visitor_cleanup(); however, we still need to expose the subtype for qmp_output_get_qobject(). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-10-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06qmp-input-visitor: Favor new visit_free() functionEric Blake1-4/+2
Now that we have a polymorphic visit_free(), we no longer need qmp_input_visitor_cleanup(); which in turn means we no longer need to return a subtype from qmp_input_visitor_new() nor a public upcast function. Generated code changes to qmp-marshal.c look like: |@@ -52,11 +52,10 @@ void qmp_marshal_add_fd(QDict *args, QOb | { | Error *err = NULL; | AddfdInfo *retval; |- QmpInputVisitor *qiv = qmp_input_visitor_new(QOBJECT(args), true); | Visitor *v; | q_obj_add_fd_arg arg = {0}; | |- v = qmp_input_get_visitor(qiv); |+ v = qmp_input_visitor_new(QOBJECT(args), true); | visit_start_struct(v, NULL, NULL, 0, &err); | if (err) { | goto out; Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-8-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-04log: Permit -dfilter 0..0xffffffffffffffffMarkus Armbruster1-1/+1
Works fine since the previous commit fixed the underlying range data type. Of course it filters out nothing, but so does 0..1,2..0xffffffffffffffff, and we don't bother rejecting that either. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04range: Replace internal representation of RangeMarkus Armbruster1-9/+7
Range represents a range as follows. Member @start is the inclusive lower bound, member @end is the exclusive upper bound. Zero @end is special: if @start is also zero, the range is empty, else @end is to be interpreted as 2^64. No other empty ranges may occur. The range [0,2^64-1] cannot be represented. If you try to create it with range_set_bounds1(), you get the empty range instead. If you try to create it with range_set_bounds() or range_extend(), assertions fail. Before range_set_bounds() existed, the open-coded creation usually got you the empty range instead. Open deathtrap. Moreover, the code dealing with the janus-faced @end is too clever by half. Dumb this down to a more pedestrian representation: members @lob and @upb are inclusive lower and upper bounds. The empty range is encoded as @lob = 1, @upb = 0. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04range: Eliminate direct Range member accessMarkus Armbruster2-5/+3
Users of struct Range mess liberally with its members, which makes refactoring hard. Create a set of methods, and convert all users to call them instead of accessing members. The methods have carefully worded contracts, and use assertions to check them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04log: Clean up misuse of Range for -dfilterMarkus Armbruster1-13/+15
Range encodes an integer interval [a,b] as { begin = a, end = b + 1 }, where a \in [0,2^64-1] and b \in [1,2^64]. Thus, zero end is to be interpreted as 2^64. The implementation of -dfilter (commit 3514552) uses Range differently: it encodes [a,b] as { begin = a, end = b }. The code works, but it contradicts the specification of Range in range.h. Switch to the specified representation. Since it can't represent [0,UINT64_MAX], we have to reject that now. Add a test for it. While we're rejecting anyway: observe that we reject -dfilter LOB..UPB where LOB > UPB when UPB is zero, but happily create an empty Range when it isn't. Reject it then, too, and add a test for it. While there, add a positive test for the problematic upper bound UINT64_MAX. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-30qapi: Fix memleak in string visitors on int listsEric Blake1-46/+29
Commit 7f8f9ef1 introduced the ability to store a list of integers as a sorted list of ranges, but when merging ranges, it leaks one or more ranges. It was also using range_get_last() incorrectly within range_compare() (a range is a start/end pair, but range_get_last() is for start/len pairs), and will also mishandle a range ending in UINT64_MAX (remember, we document that no range covers 2**64 bytes, but that ranges that end on UINT64_MAX have end < begin). The whole merge algorithm was rather complex, and included unnecessary passes over data within glib functions, and enough indirection to make it hard to easily plug the data leaks. Since we are already hard-coding things to a list of ranges, just rewrite the thing to open-code the traversal and comparisons, by making the range_compare() helper function give us an answer that is easier to use, at which point we avoid the need to pass any callbacks to g_list_*(). Then by reusing range_extend() instead of duplicating effort with range_merge(), we cover the corner cases correctly. Drop the now-unused range_merge() and ranges_can_merge(). Doing this lets test-string-{input,output}-visitor pass under valgrind without leaks. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1464712890-14262-4-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Comment hoisted out of loop] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-30qapi: Simplify use of range.hEric Blake1-4/+16
Calling our function g_list_insert_sorted_merged is a misnomer, since we are NOT writing a glib function. Furthermore, we are making every caller pass the same comparator function of range_merge(): any caller that would try otherwise would break in weird ways since our internal call to ranges_can_merge() is hard-coded to operate only on ranges, rather than paying attention to the caller's comparator. Better is to fix things so that callers don't have to care about our internal comparator, by picking a function name and updating the parameter type away from a gratuitous use of void*, to make it obvious that we are operating specifically on a list of ranges and not a generic list. Plus, refactoring the code here will make it easier to plug a memory leak in the next patch. range_compare() is now internal only, and moves to the .c file. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1464712890-14262-3-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-30range: Create range.c for code that should not be inlineEric Blake2-0/+82
g_list_insert_sorted_merged() is rather large to be an inline function; move it to its own file. range_merge() and ranges_can_merge() can likewise move, as they are only used internally. Also, it becomes obvious that the condition within range_merge() is already satisfied by its caller, and that the return value is not used. The diffstat is misleading, because of the copyright boilerplate. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1464712890-14262-2-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-29Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-0/+18
* serial port fixes (Paolo) * Q35 modeling improvements (Paolo, Vasily) * chardev cleanup improvements (Marc-André) * iscsi bugfix (Peter L.) * cpu_exec patch from multi-arch patches (Peter C.) * pci-assign tweak (Lin Ma) # gpg: Signature made Wed 29 Jun 2016 15:56:30 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (35 commits) socket: unlink unix socket on remove socket: add listen feature char: clean up remaining chardevs when leaving vhost-user: disable chardev handlers on close vhost-user-test: fix g_cond_wait_until compat implementation vl: smp_parse: fix regression ich9: implement SCI_IRQ_SEL register ich9: implement ACPI_EN register serial: reinstate watch after migration serial: remove watch on reset char: change qemu_chr_fe_add_watch to return unsigned serial: separate serial_xmit and serial_watch_cb serial: simplify tsr_retry reset serial: make tsr_retry unsigned iscsi: fix assertion in is_sector_request_lun_aligned target-*: Don't redefine cpu_exec() pci-assign: Move "Invalid ROM" error message to pci-assign-load-rom.c vnc: generalize "VNC server running on ..." message scsi: esp: fix migration MC146818 RTC: add GPIO access to output IRQ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-29socket: unlink unix socket on removeMarc-André Lureau1-0/+18
qemu leaves unix socket files behind when removing a listening chardev or leaving. qemu could clean that up, even if doing so isn't race-free. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1347077 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1466105332-10285-4-git-send-email-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-28Change net/socket.c to use socket_*() functionsAshijeet Acharya1-0/+36
Use socket_*() functions from include/qemu/sockets.h instead of listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are QAPI based and this patch performs this api conversion since everything will be using QAPI based sockets in the future. Also add a helper function socket_address_to_string() in util/qemu-sockets.c which returns the string representation of socket address. Thetask was listed on http://wiki.qemu.org/BiteSizedTasks page. Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-20Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell1-0/+13
into staging # gpg: Signature made Mon 20 Jun 2016 21:29:27 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: (42 commits) trace: split out trace events for linux-user/ directory trace: split out trace events for qom/ directory trace: split out trace events for target-ppc/ directory trace: split out trace events for target-s390x/ directory trace: split out trace events for target-sparc/ directory trace: split out trace events for net/ directory trace: split out trace events for audio/ directory trace: split out trace events for ui/ directory trace: split out trace events for hw/alpha/ directory trace: split out trace events for hw/arm/ directory trace: split out trace events for hw/acpi/ directory trace: split out trace events for hw/vfio/ directory trace: split out trace events for hw/s390x/ directory trace: split out trace events for hw/pci/ directory trace: split out trace events for hw/ppc/ directory trace: split out trace events for hw/9pfs/ directory trace: split out trace events for hw/i386/ directory trace: split out trace events for hw/isa/ directory trace: split out trace events for hw/sd/ directory trace: split out trace events for hw/sparc/ directory ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-20trace: split out trace events for util/ directoryDaniel P. Berrange1-0/+13
Move all trace-events for files in the util/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-3-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20log: Fix qemu_set_log_filename() error handlingMarkus Armbruster1-3/+3
When qemu_set_log_filename() detects an invalid file name, it reports an error, closes the log file (if any), and starts logging to stderr (unless daemonized or nothing is being logged). This is wrong. Asking for an invalid log file on the command line should be fatal. Asking for one in the monitor should fail without messing up an existing logfile. Fix by converting qemu_set_log_filename() to Error. Pass it &error_fatal, except for hmp_logfile report errors. This also permits testing without a subprocess, so do that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1466011636-6112-4-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-06-20log: Fix qemu_set_dfilter_ranges() error reportingMarkus Armbruster1-56/+57
g_error() is not an acceptable way to report errors to the user: $ qemu-system-x86_64 -dfilter 1000+0 ** (process:17187): ERROR **: Failed to parse range in: 1000+0 Trace/breakpoint trap (core dumped) g_assert() isn't, either: $ qemu-system-x86_64 -dfilter 1000x+64 ** ERROR:/work/armbru/qemu/util/log.c:180:qemu_set_dfilter_ranges: assertion failed: (e == range_op) Aborted (core dumped) Convert qemu_set_dfilter_ranges() to Error. Rework its deeply nested control flow. Touch up the error messages. Call it with &error_fatal. This also permits testing without a subprocess, so do that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1466011636-6112-3-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-06-20log: Plug memory leak on multiple -dfilterMarkus Armbruster1-0/+7
-dfilter overwrites any previous filter. The overwritten filter is leaked. Leaks since the beginning (commit 3514552, v2.6.0). Free it properly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1466011636-6112-2-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-06-20coccinelle: Remove unnecessary variables for function return valueEduardo Habkost1-5/+1
Use Coccinelle script to replace 'ret = E; return ret' with 'return E'. The script will do the substitution only when the function return type and variable type are the same. Manual fixups: * audio/audio.c: coding style of "read (...)" and "write (...)" * block/qcow2-cluster.c: wrap line to make it shorter * block/qcow2-refcount.c: change indentation of wrapped line * target-tricore/op_helper.c: fix coding style of "remainder|quotient" * target-mips/dsp_helper.c: reverted changes because I don't want to argue about checkpatch.pl * ui/qemu-pixman.c: fix line indentation * block/rbd.c: restore blank line between declarations and statements Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Unused Coccinelle rule name dropped along with a redundant comment; whitespace touched up in block/qcow2-cluster.c; stale commit message paragraph deleted] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-16avx2 configure: Use primitives in testDr. David Alan Gilbert1-7/+1
Use the avx2 primitives during the test, thus making sure that the compiler and assembler could actually use avx2. This also detects the failure case on gcc 4.8.x with -save-temps and avoids the need for the gcc version check in cutils. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1465557378-24105-3-git-send-email-dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16clean-includes: run it once morePaolo Bonzini2-0/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16os-posix: include sys/mman.hPaolo Bonzini4-8/+0
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check is bogus without a previous inclusion of sys/mman.h. Include it in sysemu/os-posix.h and remove it from everywhere else. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16hbitmap: add 'pos < size' assertsVladimir Sementsov-Ogievskiy1-0/+3
For now, fail in hbitmap_set on start + count > size will come from hbitmap_set hb_count_between hbitmap_iter_init assert(pos < hb->size) This patch adds such checks to set/get/reset functions of hbitmap. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 1465924093-76875-2-git-send-email-vsementsov@virtuozzo.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-06-11qht: QEMU's fast, resizable and scalable Hash TableEmilio G. Cota2-0/+834
This is a fast, scalable chained hash table with optional auto-resizing, allowing reads that are concurrent with reads, and reads/writes that are concurrent with writes to separate buckets. A hash table with these features will be necessary for the scalability of the ongoing MTTCG work; before those changes arrive we can already benefit from the single-threaded speedup that qht also provides. Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1465412133-3029-11-git-send-email-cota@braap.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-06-11qdist: add module to represent frequency distributions of dataEmilio G. Cota2-0/+396
Sometimes it is useful to have a quick histogram to represent a certain distribution -- for example, when investigating a performance regression in a hash table due to inadequate hashing. The appended allows us to easily represent a distribution using Unicode characters. Further, the data structure keeping track of the distribution is so simple that obtaining its values for off-line processing is trivial. Example, taking the last 10 commits to QEMU: Characters in commit title Count ----------------------------------- 39 1 48 1 53 1 54 2 57 1 61 1 67 1 78 1 80 1 qdist_init(&dist); qdist_inc(&dist, 39); [...] qdist_inc(&dist, 80); char *str = qdist_pr(&dist, 9, QDIST_PR_LABELS); // -> [39.0,43.6)▂▂ █▂ ▂ ▄[75.4,80.0] g_free(str); char *str = qdist_pr(&dist, 4, QDIST_PR_LABELS); // -> [39.0,49.2)▁█▁▁[69.8,80.0] g_free(str); Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-Id: <1465412133-3029-9-git-send-email-cota@braap.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-06-07Merge remote-tracking branch ↵Peter Maydell5-5/+0
'remotes/mjt/tags/pull-trivial-patches-2016-06-07' into staging trivial patches for 2016-06-07 # gpg: Signature made Tue 07 Jun 2016 16:20:52 BST # gpg: using RSA key 0xBEE59D74A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" * remotes/mjt/tags/pull-trivial-patches-2016-06-07: (51 commits) hbitmap: Use DIV_ROUND_UP qemu-timer: Use DIV_ROUND_UP linux-user: Use DIV_ROUND_UP slirp: Use DIV_ROUND_UP usb: Use DIV_ROUND_UP rocker: Use DIV_ROUND_UP SPICE: Use DIV_ROUND_UP audio: Use DIV_ROUND_UP xen: Use DIV_ROUND_UP crypto: Use DIV_ROUND_UP block: Use DIV_ROUND_UP qed: Use DIV_ROUND_UP qcow/qcow2: Use DIV_ROUND_UP parallels: Use DIV_ROUND_UP coccinelle: use macro DIV_ROUND_UP instead of (((n) + (d) - 1) /(d)) thunk: Rename args and fields in host-target bitmask conversion code thunk: Drop unused NO_THUNK_TYPE_SIZE guards qemu-common.h: Drop WORDS_ALIGNED define host-utils: Prefer 'false' for bool type docs/multi-thread-compression: Fix wrong command string ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-07all: Remove unnecessary glib.h includesPeter Maydell5-5/+0
Remove glib.h includes, as it is provided by osdep.h. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-12 22:17:28 +0000