From db4728e6fec0364b866d3106125974eedc00e091 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 14 Oct 2013 18:01:11 +0300 Subject: pcihp: generalization of piix4 acpi Add ACPI based PCI hotplug library with bridge hotplug support. Design - each bus gets assigned "bsel" property. - ACPI code writes this number to a new BNUM register, then uses existing UP/DOWN registers to probe slot status; to eject, write number to BNUM register, then slot into existing EJ. The interface is actually backwards-compatible with existing PIIX4 ACPI (though not migration compatible). This is split out from PIIX4 codebase so we can reuse it for Q35 as well. Signed-off-by: Michael S. Tsirkin --- hw/acpi/Makefile.objs | 3 +- hw/acpi/pcihp.c | 316 ++++++++++++++++++++++++++++++++++++++++++++++++ include/hw/acpi/pcihp.h | 72 +++++++++++ 3 files changed, 389 insertions(+), 2 deletions(-) create mode 100644 hw/acpi/pcihp.c create mode 100644 include/hw/acpi/pcihp.h diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs index a0b63b5626..841eca2e7c 100644 --- a/hw/acpi/Makefile.objs +++ b/hw/acpi/Makefile.objs @@ -1,2 +1 @@ -common-obj-$(CONFIG_ACPI) += core.o piix4.o ich9.o - +common-obj-$(CONFIG_ACPI) += core.o piix4.o ich9.o pcihp.o diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c new file mode 100644 index 0000000000..3fa3d7c290 --- /dev/null +++ b/hw/acpi/pcihp.c @@ -0,0 +1,316 @@ +/* + * QEMU<->ACPI BIOS PCI hotplug interface + * + * QEMU supports PCI hotplug via ACPI. This module + * implements the interface between QEMU and the ACPI BIOS. + * Interface specification - see docs/specs/acpi_pci_hotplug.txt + * + * Copyright (c) 2013, Red Hat Inc, Michael S. Tsirkin (mst@redhat.com) + * Copyright (c) 2006 Fabrice Bellard + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License version 2 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see + * + * Contributions after 2012-01-13 are licensed under the terms of the + * GNU GPL, version 2 or (at your option) any later version. + */ + +#include "hw/acpi/pcihp.h" + +#include "hw/hw.h" +#include "hw/i386/pc.h" +#include "hw/pci/pci.h" +#include "hw/acpi/acpi.h" +#include "sysemu/sysemu.h" +#include "qemu/range.h" +#include "exec/ioport.h" +#include "exec/address-spaces.h" +#include "hw/pci/pci_bus.h" +#include "qom/qom-qobject.h" +#include "qapi/qmp/qint.h" + +//#define DEBUG + +#ifdef DEBUG +# define ACPI_PCIHP_DPRINTF(format, ...) printf(format, ## __VA_ARGS__) +#else +# define ACPI_PCIHP_DPRINTF(format, ...) do { } while (0) +#endif + +#define PCI_HOTPLUG_ADDR 0xae00 +#define PCI_HOTPLUG_SIZE 0x0014 +#define PCI_UP_BASE 0xae00 +#define PCI_DOWN_BASE 0xae04 +#define PCI_EJ_BASE 0xae08 +#define PCI_RMV_BASE 0xae0c +#define PCI_SEL_BASE 0xae10 + +typedef struct AcpiPciHpFind { + int bsel; + PCIBus *bus; +} AcpiPciHpFind; + +static int acpi_pcihp_get_bsel(PCIBus *bus) +{ + QObject *o = object_property_get_qobject(OBJECT(bus), + ACPI_PCIHP_PROP_BSEL, NULL); + int64_t bsel = -1; + if (o) { + bsel = qint_get_int(qobject_to_qint(o)); + } + if (bsel < 0) { + return -1; + } + return bsel; +} + +static void acpi_pcihp_test_hotplug_bus(PCIBus *bus, void *opaque) +{ + AcpiPciHpFind *find = opaque; + if (find->bsel == acpi_pcihp_get_bsel(bus)) { + find->bus = bus; + } +} + +static PCIBus *acpi_pcihp_find_hotplug_bus(AcpiPciHpState *s, int bsel) +{ + AcpiPciHpFind find = { .bsel = bsel, .bus = NULL }; + + if (bsel < 0) { + return NULL; + } + + pci_for_each_bus(s->root, acpi_pcihp_test_hotplug_bus, &find); + + /* Make bsel 0 eject root bus if bsel property is not set, + * for compatibility with non acpi setups. + * TODO: really needed? + */ + if (!bsel && !find.bus) { + find.bus = s->root; + } + return find.bus; +} + +static bool acpi_pcihp_pc_no_hotplug(AcpiPciHpState *s, PCIDevice *dev) +{ + PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev); + /* + * ACPI doesn't allow hotplug of bridge devices. Don't allow + * hot-unplug of bridge devices unless they were added by hotplug + * (and so, not described by acpi). + */ + return (pc->is_bridge && !dev->qdev.hotplugged) || pc->no_hotplug; +} + +static void acpi_pcihp_eject_slot(AcpiPciHpState *s, unsigned bsel, unsigned slots) +{ + BusChild *kid, *next; + int slot = ffs(slots) - 1; + bool slot_free = true; + PCIBus *bus = acpi_pcihp_find_hotplug_bus(s, bsel); + + if (!bus) { + return; + } + + /* Mark request as complete */ + s->acpi_pcihp_pci_status[bsel].down &= ~(1U << slot); + + QTAILQ_FOREACH_SAFE(kid, &bus->qbus.children, sibling, next) { + DeviceState *qdev = kid->child; + PCIDevice *dev = PCI_DEVICE(qdev); + if (PCI_SLOT(dev->devfn) == slot) { + if (acpi_pcihp_pc_no_hotplug(s, dev)) { + slot_free = false; + } else { + object_unparent(OBJECT(qdev)); + } + } + } + if (slot_free) { + s->acpi_pcihp_pci_status[bsel].device_present &= ~(1U << slot); + } +} + +static void acpi_pcihp_update_hotplug_bus(AcpiPciHpState *s, int bsel) +{ + BusChild *kid, *next; + PCIBus *bus = acpi_pcihp_find_hotplug_bus(s, bsel); + + /* Execute any pending removes during reset */ + while (s->acpi_pcihp_pci_status[bsel].down) { + acpi_pcihp_eject_slot(s, bsel, s->acpi_pcihp_pci_status[bsel].down); + } + + s->acpi_pcihp_pci_status[bsel].hotplug_enable = ~0; + s->acpi_pcihp_pci_status[bsel].device_present = 0; + + if (!bus) { + return; + } + QTAILQ_FOREACH_SAFE(kid, &bus->qbus.children, sibling, next) { + DeviceState *qdev = kid->child; + PCIDevice *pdev = PCI_DEVICE(qdev); + int slot = PCI_SLOT(pdev->devfn); + + if (acpi_pcihp_pc_no_hotplug(s, pdev)) { + s->acpi_pcihp_pci_status[bsel].hotplug_enable &= ~(1U << slot); + } + + s->acpi_pcihp_pci_status[bsel].device_present |= (1U << slot); + } +} + +static void acpi_pcihp_update(AcpiPciHpState *s) +{ + int i; + + for (i = 0; i < ACPI_PCIHP_MAX_HOTPLUG_BUS; ++i) { + acpi_pcihp_update_hotplug_bus(s, i); + } +} + +void acpi_pcihp_reset(AcpiPciHpState *s) +{ + acpi_pcihp_update(s); +} + +static void enable_device(AcpiPciHpState *s, unsigned bsel, int slot) +{ + s->acpi_pcihp_pci_status[bsel].device_present |= (1U << slot); +} + +static void disable_device(AcpiPciHpState *s, unsigned bsel, int slot) +{ + s->acpi_pcihp_pci_status[bsel].down |= (1U << slot); +} + +int acpi_pcihp_device_hotplug(AcpiPciHpState *s, PCIDevice *dev, + PCIHotplugState state) +{ + int slot = PCI_SLOT(dev->devfn); + int bsel = acpi_pcihp_get_bsel(dev->bus); + if (bsel < 0) { + return -1; + } + + /* Don't send event when device is enabled during qemu machine creation: + * it is present on boot, no hotplug event is necessary. We do send an + * event when the device is disabled later. */ + if (state == PCI_COLDPLUG_ENABLED) { + s->acpi_pcihp_pci_status[bsel].device_present |= (1U << slot); + return 0; + } + + if (state == PCI_HOTPLUG_ENABLED) { + enable_device(s, bsel, slot); + } else { + disable_device(s, bsel, slot); + } + + return 0; +} + +static uint64_t pci_read(void *opaque, hwaddr addr, unsigned int size) +{ + AcpiPciHpState *s = opaque; + uint32_t val = 0; + int bsel = s->hotplug_select; + + if (bsel < 0 || bsel > ACPI_PCIHP_MAX_HOTPLUG_BUS) { + return 0; + } + + switch (addr) { + case PCI_UP_BASE - PCI_HOTPLUG_ADDR: + /* Manufacture an "up" value to cause a device check on any hotplug + * slot with a device. Extra device checks are harmless. */ + val = s->acpi_pcihp_pci_status[bsel].device_present & + s->acpi_pcihp_pci_status[bsel].hotplug_enable; + ACPI_PCIHP_DPRINTF("pci_up_read %" PRIu32 "\n", val); + break; + case PCI_DOWN_BASE - PCI_HOTPLUG_ADDR: + val = s->acpi_pcihp_pci_status[bsel].down; + ACPI_PCIHP_DPRINTF("pci_down_read %" PRIu32 "\n", val); + break; + case PCI_EJ_BASE - PCI_HOTPLUG_ADDR: + /* No feature defined yet */ + ACPI_PCIHP_DPRINTF("pci_features_read %" PRIu32 "\n", val); + break; + case PCI_RMV_BASE - PCI_HOTPLUG_ADDR: + val = s->acpi_pcihp_pci_status[bsel].hotplug_enable; + ACPI_PCIHP_DPRINTF("pci_rmv_read %" PRIu32 "\n", val); + break; + case PCI_SEL_BASE - PCI_HOTPLUG_ADDR: + val = s->hotplug_select; + ACPI_PCIHP_DPRINTF("pci_sel_read %" PRIu32 "\n", val); + default: + break; + } + + return val; +} + +static void pci_write(void *opaque, hwaddr addr, uint64_t data, + unsigned int size) +{ + AcpiPciHpState *s = opaque; + switch (addr) { + case PCI_EJ_BASE - PCI_HOTPLUG_ADDR: + if (s->hotplug_select >= ACPI_PCIHP_MAX_HOTPLUG_BUS) { + break; + } + acpi_pcihp_eject_slot(s, s->hotplug_select, data); + ACPI_PCIHP_DPRINTF("pciej write %" HWADDR_PRIx " <== %" PRIu64 "\n", + addr, data); + break; + case PCI_SEL_BASE - PCI_HOTPLUG_ADDR: + s->hotplug_select = data; + ACPI_PCIHP_DPRINTF("pcisel write %" HWADDR_PRIx " <== %" PRIu64 "\n", + addr, data); + default: + break; + } +} + +static const MemoryRegionOps acpi_pcihp_io_ops = { + .read = pci_read, + .write = pci_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +void acpi_pcihp_init(AcpiPciHpState *s, PCIBus *root_bus, + MemoryRegion *address_space_io) +{ + s->root= root_bus; + memory_region_init_io(&s->io, NULL, &acpi_pcihp_io_ops, s, + "acpi-pci-hotplug", + PCI_HOTPLUG_SIZE); + memory_region_add_subregion(address_space_io, PCI_HOTPLUG_ADDR, &s->io); +} + +const VMStateDescription vmstate_acpi_pcihp_pci_status = { + .name = "acpi_pcihp_pci_status", + .version_id = 1, + .minimum_version_id = 1, + .minimum_version_id_old = 1, + .fields = (VMStateField []) { + VMSTATE_UINT32(up, AcpiPciHpPciStatus), + VMSTATE_UINT32(down, AcpiPciHpPciStatus), + VMSTATE_END_OF_LIST() + } +}; diff --git a/include/hw/acpi/pcihp.h b/include/hw/acpi/pcihp.h new file mode 100644 index 0000000000..6230e60954 --- /dev/null +++ b/include/hw/acpi/pcihp.h @@ -0,0 +1,72 @@ +/* + * QEMU<->ACPI BIOS PCI hotplug interface + * + * QEMU supports PCI hotplug via ACPI. This module + * implements the interface between QEMU and the ACPI BIOS. + * Interface specification - see docs/specs/acpi_pci_hotplug.txt + * + * Copyright (c) 2013, Red Hat Inc, Michael S. Tsirkin (mst@redhat.com) + * Copyright (c) 2006 Fabrice Bellard + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License version 2 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see + * + * Contributions after 2012-01-13 are licensed under the terms of the + * GNU GPL, version 2 or (at your option) any later version. + */ + +#ifndef HW_ACPI_PCIHP_H +#define HW_ACPI_PCIHP_H + +#include +#include +#include "hw/pci/pci.h" /* for PCIHotplugState */ + +typedef struct AcpiPciHpPciStatus { + uint32_t up; /* deprecated, maintained for migration compatibility */ + uint32_t down; + uint32_t hotplug_enable; + uint32_t device_present; +} AcpiPciHpPciStatus; + +#define ACPI_PCIHP_PROP_BSEL "acpi-pcihp-bsel" +#define ACPI_PCIHP_MAX_HOTPLUG_BUS 256 + +typedef struct AcpiPciHpState { + AcpiPciHpPciStatus acpi_pcihp_pci_status[ACPI_PCIHP_MAX_HOTPLUG_BUS]; + uint32_t hotplug_select; + PCIBus *root; + MemoryRegion io; +} AcpiPciHpState; + +void acpi_pcihp_init(AcpiPciHpState *, PCIBus *root, + MemoryRegion *address_space_io); + +/* Invoke on device hotplug */ +int acpi_pcihp_device_hotplug(AcpiPciHpState *, PCIDevice *, + PCIHotplugState state); + +/* Called on reset */ +void acpi_pcihp_reset(AcpiPciHpState *s); + +extern const VMStateDescription vmstate_acpi_pcihp_pci_status; + +#define VMSTATE_PCI_HOTPLUG(pcihp, state, test_pcihp) \ + VMSTATE_UINT32_TEST(pcihp.hotplug_select, state, \ + test_pcihp), \ + VMSTATE_STRUCT_ARRAY_TEST(pcihp.acpi_pcihp_pci_status, state, \ + ACPI_PCIHP_MAX_HOTPLUG_BUS, \ + test_pcihp, 1, \ + vmstate_acpi_pcihp_pci_status, \ + AcpiPciHpPciStatus) + +#endif -- cgit v1.2.1