From 5444e768ee1abe6e021bece19a9a932351f88c88 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Mon, 13 May 2013 13:29:47 +0200 Subject: add a header file for atomic operations We're already using them in several places, but __sync builtins are just too ugly to type, and do not provide seqcst load/store operations. Reviewed-by: Richard Henderson Signed-off-by: Paolo Bonzini --- docs/atomics.txt | 352 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 352 insertions(+) create mode 100644 docs/atomics.txt (limited to 'docs') diff --git a/docs/atomics.txt b/docs/atomics.txt new file mode 100644 index 0000000000..6f2997bc65 --- /dev/null +++ b/docs/atomics.txt @@ -0,0 +1,352 @@ +CPUs perform independent memory operations effectively in random order. +but this can be a problem for CPU-CPU interaction (including interactions +between QEMU and the guest). Multi-threaded programs use various tools +to instruct the compiler and the CPU to restrict the order to something +that is consistent with the expectations of the programmer. + +The most basic tool is locking. Mutexes, condition variables and +semaphores are used in QEMU, and should be the default approach to +synchronization. Anything else is considerably harder, but it's +also justified more often than one would like. The two tools that +are provided by qemu/atomic.h are memory barriers and atomic operations. + +Macros defined by qemu/atomic.h fall in three camps: + +- compiler barriers: barrier(); + +- weak atomic access and manual memory barriers: atomic_read(), + atomic_set(), smp_rmb(), smp_wmb(), smp_mb(), smp_read_barrier_depends(); + +- sequentially consistent atomic access: everything else. + + +COMPILER MEMORY BARRIER +======================= + +barrier() prevents the compiler from moving the memory accesses either +side of it to the other side. The compiler barrier has no direct effect +on the CPU, which may then reorder things however it wishes. + +barrier() is mostly used within qemu/atomic.h itself. On some +architectures, CPU guarantees are strong enough that blocking compiler +optimizations already ensures the correct order of execution. In this +case, qemu/atomic.h will reduce stronger memory barriers to simple +compiler barriers. + +Still, barrier() can be useful when writing code that can be interrupted +by signal handlers. + + +SEQUENTIALLY CONSISTENT ATOMIC ACCESS +===================================== + +Most of the operations in the qemu/atomic.h header ensure *sequential +consistency*, where "the result of any execution is the same as if the +operations of all the processors were executed in some sequential order, +and the operations of each individual processor appear in this sequence +in the order specified by its program". + +qemu/atomic.h provides the following set of atomic read-modify-write +operations: + + void atomic_inc(ptr) + void atomic_dec(ptr) + void atomic_add(ptr, val) + void atomic_sub(ptr, val) + void atomic_and(ptr, val) + void atomic_or(ptr, val) + + typeof(*ptr) atomic_fetch_inc(ptr) + typeof(*ptr) atomic_fetch_dec(ptr) + typeof(*ptr) atomic_fetch_add(ptr, val) + typeof(*ptr) atomic_fetch_sub(ptr, val) + typeof(*ptr) atomic_fetch_and(ptr, val) + typeof(*ptr) atomic_fetch_or(ptr, val) + typeof(*ptr) atomic_xchg(ptr, val + typeof(*ptr) atomic_cmpxchg(ptr, old, new) + +all of which return the old value of *ptr. These operations are +polymorphic; they operate on any type that is as wide as an int. + +Sequentially consistent loads and stores can be done using: + + atomic_fetch_add(ptr, 0) for loads + atomic_xchg(ptr, val) for stores + +However, they are quite expensive on some platforms, notably POWER and +ARM. Therefore, qemu/atomic.h provides two primitives with slightly +weaker constraints: + + typeof(*ptr) atomic_mb_read(ptr) + void atomic_mb_set(ptr, val) + +The semantics of these primitives map to Java volatile variables, +and are strongly related to memory barriers as used in the Linux +kernel (see below). + +As long as you use atomic_mb_read and atomic_mb_set, accesses cannot +be reordered with each other, and it is also not possible to reorder +"normal" accesses around them. + +However, and this is the important difference between +atomic_mb_read/atomic_mb_set and sequential consistency, it is important +for both threads to access the same volatile variable. It is not the +case that everything visible to thread A when it writes volatile field f +becomes visible to thread B after it reads volatile field g. The store +and load have to "match" (i.e., be performed on the same volatile +field) to achieve the right semantics. + + +These operations operate on any type that is as wide as an int or smaller. + + +WEAK ATOMIC ACCESS AND MANUAL MEMORY BARRIERS +============================================= + +Compared to sequentially consistent atomic access, programming with +weaker consistency models can be considerably more complicated. +In general, if the algorithm you are writing includes both writes +and reads on the same side, it is generally simpler to use sequentially +consistent primitives. + +When using this model, variables are accessed with atomic_read() and +atomic_set(), and restrictions to the ordering of accesses is enforced +using the smp_rmb(), smp_wmb(), smp_mb() and smp_read_barrier_depends() +memory barriers. + +atomic_read() and atomic_set() prevents the compiler from using +optimizations that might otherwise optimize accesses out of existence +on the one hand, or that might create unsolicited accesses on the other. +In general this should not have any effect, because the same compiler +barriers are already implied by memory barriers. However, it is useful +to do so, because it tells readers which variables are shared with +other threads, and which are local to the current thread or protected +by other, more mundane means. + +Memory barriers control the order of references to shared memory. +They come in four kinds: + +- smp_rmb() guarantees that all the LOAD operations specified before + the barrier will appear to happen before all the LOAD operations + specified after the barrier with respect to the other components of + the system. + + In other words, smp_rmb() puts a partial ordering on loads, but is not + required to have any effect on stores. + +- smp_wmb() guarantees that all the STORE operations specified before + the barrier will appear to happen before all the STORE operations + specified after the barrier with respect to the other components of + the system. + + In other words, smp_wmb() puts a partial ordering on stores, but is not + required to have any effect on loads. + +- smp_mb() guarantees that all the LOAD and STORE operations specified + before the barrier will appear to happen before all the LOAD and + STORE operations specified after the barrier with respect to the other + components of the system. + + smp_mb() puts a partial ordering on both loads and stores. It is + stronger than both a read and a write memory barrier; it implies both + smp_rmb() and smp_wmb(), but it also prevents STOREs coming before the + barrier from overtaking LOADs coming after the barrier and vice versa. + +- smp_read_barrier_depends() is a weaker kind of read barrier. On + most processors, whenever two loads are performed such that the + second depends on the result of the first (e.g., the first load + retrieves the address to which the second load will be directed), + the processor will guarantee that the first LOAD will appear to happen + before the second with respect to the other components of the system. + However, this is not always true---for example, it was not true on + Alpha processors. Whenever this kind of access happens to shared + memory (that is not protected by a lock), a read barrier is needed, + and smp_read_barrier_depends() can be used instead of smp_rmb(). + + Note that the first load really has to have a _data_ dependency and not + a control dependency. If the address for the second load is dependent + on the first load, but the dependency is through a conditional rather + than actually loading the address itself, then it's a _control_ + dependency and a full read barrier or better is required. + + +This is the set of barriers that is required *between* two atomic_read() +and atomic_set() operations to achieve sequential consistency: + + | 2nd operation | + |-----------------------------------------| + 1st operation | (after last) | atomic_read | atomic_set | + ---------------+--------------+-------------+------------| + (before first) | | none | smp_wmb() | + ---------------+--------------+-------------+------------| + atomic_read | smp_rmb() | smp_rmb()* | ** | + ---------------+--------------+-------------+------------| + atomic_set | none | smp_mb()*** | smp_wmb() | + ---------------+--------------+-------------+------------| + + * Or smp_read_barrier_depends(). + + ** This requires a load-store barrier. How to achieve this varies + depending on the machine, but in practice smp_rmb()+smp_wmb() + should have the desired effect. For example, on PowerPC the + lwsync instruction is a combined load-load, load-store and + store-store barrier. + + *** This requires a store-load barrier. On most machines, the only + way to achieve this is a full barrier. + + +You can see that the two possible definitions of atomic_mb_read() +and atomic_mb_set() are the following: + + 1) atomic_mb_read(p) = atomic_read(p); smp_rmb() + atomic_mb_set(p, v) = smp_wmb(); atomic_set(p, v); smp_mb() + + 2) atomic_mb_read(p) = smp_mb() atomic_read(p); smp_rmb() + atomic_mb_set(p, v) = smp_wmb(); atomic_set(p, v); + +Usually the former is used, because smp_mb() is expensive and a program +normally has more reads than writes. Therefore it makes more sense to +make atomic_mb_set() the more expensive operation. + +There are two common cases in which atomic_mb_read and atomic_mb_set +generate too many memory barriers, and thus it can be useful to manually +place barriers instead: + +- when a data structure has one thread that is always a writer + and one thread that is always a reader, manual placement of + memory barriers makes the write side faster. Furthermore, + correctness is easy to check for in this case using the "pairing" + trick that is explained below: + + thread 1 thread 1 + ------------------------- ------------------------ + (other writes) + smp_wmb() + atomic_mb_set(&a, x) atomic_set(&a, x) + smp_wmb() + atomic_mb_set(&b, y) atomic_set(&b, y) + + => + thread 2 thread 2 + ------------------------- ------------------------ + y = atomic_mb_read(&b) y = atomic_read(&b) + smp_rmb() + x = atomic_mb_read(&a) x = atomic_read(&a) + smp_rmb() + +- sometimes, a thread is accessing many variables that are otherwise + unrelated to each other (for example because, apart from the current + thread, exactly one other thread will read or write each of these + variables). In this case, it is possible to "hoist" the implicit + barriers provided by atomic_mb_read() and atomic_mb_set() outside + a loop. For example, the above definition atomic_mb_read() gives + the following transformation: + + n = 0; n = 0; + for (i = 0; i < 10; i++) => for (i = 0; i < 10; i++) + n += atomic_mb_read(&a[i]); n += atomic_read(&a[i]); + smp_rmb(); + + Similarly, atomic_mb_set() can be transformed as follows: + smp_mb(): + + smp_wmb(); + for (i = 0; i < 10; i++) => for (i = 0; i < 10; i++) + atomic_mb_set(&a[i], false); atomic_set(&a[i], false); + smp_mb(); + + +The two tricks can be combined. In this case, splitting a loop in +two lets you hoist the barriers out of the loops _and_ eliminate the +expensive smp_mb(): + + smp_wmb(); + for (i = 0; i < 10; i++) { => for (i = 0; i < 10; i++) + atomic_mb_set(&a[i], false); atomic_set(&a[i], false); + atomic_mb_set(&b[i], false); smb_wmb(); + } for (i = 0; i < 10; i++) + atomic_set(&a[i], false); + smp_mb(); + + The other thread can still use atomic_mb_read()/atomic_mb_set() + + +Memory barrier pairing +---------------------- + +A useful rule of thumb is that memory barriers should always, or almost +always, be paired with another barrier. In the case of QEMU, however, +note that the other barrier may actually be in a driver that runs in +the guest! + +For the purposes of pairing, smp_read_barrier_depends() and smp_rmb() +both count as read barriers. A read barriers shall pair with a write +barrier or a full barrier; a write barrier shall pair with a read +barrier or a full barrier. A full barrier can pair with anything. +For example: + + thread 1 thread 2 + =============== =============== + a = 1; + smp_wmb(); + b = 2; x = b; + smp_rmb(); + y = a; + +Note that the "writing" thread are accessing the variables in the +opposite order as the "reading" thread. This is expected: stores +before the write barrier will normally match the loads after the +read barrier, and vice versa. The same is true for more than 2 +access and for data dependency barriers: + + thread 1 thread 2 + =============== =============== + b[2] = 1; + smp_wmb(); + x->i = 2; + smp_wmb(); + a = x; x = a; + smp_read_barrier_depends(); + y = x->i; + smp_read_barrier_depends(); + z = b[y]; + +smp_wmb() also pairs with atomic_mb_read(), and smp_rmb() also pairs +with atomic_mb_set(). + + +COMPARISON WITH LINUX KERNEL MEMORY BARRIERS +============================================ + +Here is a list of differences between Linux kernel atomic operations +and memory barriers, and the equivalents in QEMU: + +- atomic operations in Linux are always on a 32-bit int type and + use a boxed atomic_t type; atomic operations in QEMU are polymorphic + and use normal C types. + +- atomic_read and atomic_set in Linux give no guarantee at all; + atomic_read and atomic_set in QEMU include a compiler barrier + (similar to the ACCESS_ONCE macro in Linux). + +- most atomic read-modify-write operations in Linux return void; + in QEMU, all of them return the old value of the variable. + +- different atomic read-modify-write operations in Linux imply + a different set of memory barriers; in QEMU, all of them enforce + sequential consistency, which means they imply full memory barriers + before and after the operation. + +- Linux does not have an equivalent of atomic_mb_read() and + atomic_mb_set(). In particular, note that set_mb() is a little + weaker than atomic_mb_set(). + + +SOURCES +======= + +* Documentation/memory-barriers.txt from the Linux kernel + +* "The JSR-133 Cookbook for Compiler Writers", available at + http://g.oswego.edu/dl/jmm/cookbook.html -- cgit v1.2.1