From 97237e0a5a95123a072a49eddd3bc5e20534f7fa Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 30 Aug 2011 11:49:05 +0200 Subject: usb-ccid: switch to USBDesc* Switch the smard card emulation to use the USBDesc* structs for the usb descriptors. Signed-off-by: Gerd Hoffmann --- hw/usb-ccid.c | 247 ++++++++++++++++++++-------------------------------------- 1 file changed, 83 insertions(+), 164 deletions(-) (limited to 'hw/usb-ccid.c') diff --git a/hw/usb-ccid.c b/hw/usb-ccid.c index c2f9241014..d40977be8d 100644 --- a/hw/usb-ccid.c +++ b/hw/usb-ccid.c @@ -37,6 +37,7 @@ #include "qemu-common.h" #include "qemu-error.h" #include "usb.h" +#include "usb-desc.h" #include "monitor.h" #include "hw/ccid.h" @@ -306,56 +307,7 @@ typedef struct USBCCIDState { * 0dc3:1004 Athena Smartcard Solutions, Inc. */ -static const uint8_t qemu_ccid_dev_descriptor[] = { - 0x12, /* u8 bLength; */ - USB_DT_DEVICE, /* u8 bDescriptorType; Device */ - 0x10, 0x01, /* u16 bcdUSB; v1.1 */ - - 0x00, /* u8 bDeviceClass; */ - 0x00, /* u8 bDeviceSubClass; */ - 0x00, /* u8 bDeviceProtocol; [ low/full speeds only ] */ - 0x40, /* u8 bMaxPacketSize0; 8 Bytes (valid: 8,16,32,64) */ - - /* Vendor and product id are arbitrary. */ - /* u16 idVendor */ - CCID_VENDOR_ID & 0xff, CCID_VENDOR_ID >> 8, - /* u16 idProduct */ - CCID_PRODUCT_ID & 0xff, CCID_PRODUCT_ID >> 8, - /* u16 bcdDevice */ - CCID_DEVICE_VERSION & 0xff, CCID_DEVICE_VERSION >> 8, - 0x01, /* u8 iManufacturer; */ - 0x02, /* u8 iProduct; */ - 0x03, /* u8 iSerialNumber; */ - 0x01, /* u8 bNumConfigurations; */ -}; - -static const uint8_t qemu_ccid_config_descriptor[] = { - - /* one configuration */ - 0x09, /* u8 bLength; */ - USB_DT_CONFIG, /* u8 bDescriptorType; Configuration */ - 0x5d, 0x00, /* u16 wTotalLength; 9+9+54+7+7+7 */ - 0x01, /* u8 bNumInterfaces; (1) */ - 0x01, /* u8 bConfigurationValue; */ - 0x00, /* u8 iConfiguration; */ - 0xe0, /* u8 bmAttributes; - Bit 7: must be set, - 6: Self-powered, - 5: Remote wakeup, - 4..0: resvd */ - 100/2, /* u8 MaxPower; 50 == 100mA */ - - /* one interface */ - 0x09, /* u8 if_bLength; */ - USB_DT_INTERFACE, /* u8 if_bDescriptorType; Interface */ - 0x00, /* u8 if_bInterfaceNumber; */ - 0x00, /* u8 if_bAlternateSetting; */ - 0x03, /* u8 if_bNumEndpoints; */ - 0x0b, /* u8 if_bInterfaceClass; Smart Card Device Class */ - 0x00, /* u8 if_bInterfaceSubClass; Subclass code */ - 0x00, /* u8 if_bInterfaceProtocol; Protocol code */ - 0x04, /* u8 if_iInterface; Index of string descriptor */ - +static const uint8_t qemu_ccid_descriptor[] = { /* Smart Card Device Class Descriptor */ 0x36, /* u8 bLength; */ 0x21, /* u8 bDescriptorType; Functional */ @@ -439,38 +391,81 @@ static const uint8_t qemu_ccid_config_descriptor[] = { * 02h PIN Modification */ 0x01, /* u8 bMaxCCIDBusySlots; */ +}; - /* Interrupt-IN endpoint */ - 0x07, /* u8 ep_bLength; */ - /* u8 ep_bDescriptorType; Endpoint */ - USB_DT_ENDPOINT, - /* u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x80 | CCID_INT_IN_EP, - 0x03, /* u8 ep_bmAttributes; Interrupt */ - /* u16 ep_wMaxPacketSize; */ - CCID_MAX_PACKET_SIZE & 0xff, (CCID_MAX_PACKET_SIZE >> 8), - 0xff, /* u8 ep_bInterval; */ - - /* Bulk-In endpoint */ - 0x07, /* u8 ep_bLength; */ - /* u8 ep_bDescriptorType; Endpoint */ - USB_DT_ENDPOINT, - /* u8 ep_bEndpointAddress; IN Endpoint 2 */ - 0x80 | CCID_BULK_IN_EP, - 0x02, /* u8 ep_bmAttributes; Bulk */ - 0x40, 0x00, /* u16 ep_wMaxPacketSize; */ - 0x00, /* u8 ep_bInterval; */ - - /* Bulk-Out endpoint */ - 0x07, /* u8 ep_bLength; */ - /* u8 ep_bDescriptorType; Endpoint */ - USB_DT_ENDPOINT, - /* u8 ep_bEndpointAddress; OUT Endpoint 3 */ - CCID_BULK_OUT_EP, - 0x02, /* u8 ep_bmAttributes; Bulk */ - 0x40, 0x00, /* u16 ep_wMaxPacketSize; */ - 0x00, /* u8 ep_bInterval; */ +enum { + STR_MANUFACTURER = 1, + STR_PRODUCT, + STR_SERIALNUMBER, + STR_INTERFACE, +}; +static const USBDescStrings desc_strings = { + [STR_MANUFACTURER] = "QEMU " QEMU_VERSION, + [STR_PRODUCT] = "QEMU USB CCID", + [STR_SERIALNUMBER] = "1", + [STR_INTERFACE] = "CCID Interface", +}; + +static const USBDescIface desc_iface0 = { + .bInterfaceNumber = 0, + .bNumEndpoints = 3, + .bInterfaceClass = 0x0b, + .bInterfaceSubClass = 0x00, + .bInterfaceProtocol = 0x00, + .iInterface = STR_INTERFACE, + .ndesc = 1, + .descs = (USBDescOther[]) { + { + /* smartcard descriptor */ + .data = qemu_ccid_descriptor, + }, + }, + .eps = (USBDescEndpoint[]) { + { + .bEndpointAddress = USB_DIR_IN | CCID_INT_IN_EP, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .bInterval = 255, + .wMaxPacketSize = 64, + },{ + .bEndpointAddress = USB_DIR_IN | CCID_BULK_IN_EP, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = 64, + },{ + .bEndpointAddress = USB_DIR_OUT | CCID_BULK_OUT_EP, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = 64, + }, + } +}; + +static const USBDescDevice desc_device = { + .bcdUSB = 0x0110, + .bMaxPacketSize0 = 64, + .bNumConfigurations = 1, + .confs = (USBDescConfig[]) { + { + .bNumInterfaces = 1, + .bConfigurationValue = 1, + .bmAttributes = 0x80, + .bMaxPower = 50, + .nif = 1, + .ifs = &desc_iface0, + }, + }, +}; + +static const USBDesc desc_ccid = { + .id = { + .idVendor = CCID_VENDOR_ID, + .idProduct = CCID_PRODUCT_ID, + .bcdDevice = CCID_DEVICE_VERSION, + .iManufacturer = STR_MANUFACTURER, + .iProduct = STR_PRODUCT, + .iSerialNumber = STR_SERIALNUMBER, + }, + .full = &desc_device, + .str = desc_strings, }; static bool ccid_has_pending_answers(USBCCIDState *s) @@ -610,87 +605,12 @@ static int ccid_handle_control(USBDevice *dev, USBPacket *p, int request, int ret = 0; DPRINTF(s, 1, "got control %x, value %x\n", request, value); + ret = usb_desc_handle_control(dev, p, request, value, index, length, data); + if (ret >= 0) { + return ret; + } + switch (request) { - case DeviceRequest | USB_REQ_GET_STATUS: - data[0] = (1 << USB_DEVICE_SELF_POWERED) | - (dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP); - data[1] = 0x00; - ret = 2; - break; - case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: - if (value == USB_DEVICE_REMOTE_WAKEUP) { - dev->remote_wakeup = 0; - } else { - goto fail; - } - ret = 0; - break; - case DeviceOutRequest | USB_REQ_SET_FEATURE: - if (value == USB_DEVICE_REMOTE_WAKEUP) { - dev->remote_wakeup = 1; - } else { - goto fail; - } - ret = 0; - break; - case DeviceOutRequest | USB_REQ_SET_ADDRESS: - dev->addr = value; - ret = 0; - break; - case DeviceRequest | USB_REQ_GET_DESCRIPTOR: - switch (value >> 8) { - case USB_DT_DEVICE: - memcpy(data, qemu_ccid_dev_descriptor, - sizeof(qemu_ccid_dev_descriptor)); - ret = sizeof(qemu_ccid_dev_descriptor); - break; - case USB_DT_CONFIG: - memcpy(data, qemu_ccid_config_descriptor, - sizeof(qemu_ccid_config_descriptor)); - ret = sizeof(qemu_ccid_config_descriptor); - break; - case USB_DT_STRING: - switch (value & 0xff) { - case 0: - /* language ids */ - data[0] = 4; - data[1] = 3; - data[2] = 0x09; - data[3] = 0x04; - ret = 4; - break; - case 1: - /* vendor description */ - ret = set_usb_string(data, CCID_VENDOR_DESCRIPTION); - break; - case 2: - /* product description */ - ret = set_usb_string(data, CCID_PRODUCT_DESCRIPTION); - break; - case 3: - /* serial number */ - ret = set_usb_string(data, CCID_SERIAL_NUMBER_STRING); - break; - case 4: - /* interface name */ - ret = set_usb_string(data, CCID_INTERFACE_NAME); - break; - default: - goto fail; - } - break; - default: - goto fail; - } - break; - case DeviceRequest | USB_REQ_GET_CONFIGURATION: - data[0] = 1; - ret = 1; - break; - case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: - /* Only one configuration - we just ignore the request */ - ret = 0; - break; case DeviceRequest | USB_REQ_GET_INTERFACE: data[0] = 0; ret = 1; @@ -698,9 +618,6 @@ static int ccid_handle_control(USBDevice *dev, USBPacket *p, int request, case InterfaceOutRequest | USB_REQ_SET_INTERFACE: ret = 0; break; - case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: - ret = 0; - break; /* Class specific requests. */ case InterfaceOutClass | CCID_CONTROL_ABORT: @@ -716,7 +633,6 @@ static int ccid_handle_control(USBDevice *dev, USBPacket *p, int request, ret = USB_RET_STALL; break; default: -fail: DPRINTF(s, 1, "got unsupported/bogus control %x, value %x\n", request, value); ret = USB_RET_STALL; @@ -1075,6 +991,7 @@ static int ccid_handle_data(USBDevice *dev, USBPacket *p) break; default: DPRINTF(s, 1, "Bad endpoint\n"); + ret = USB_RET_STALL; break; } break; @@ -1256,6 +1173,7 @@ static int ccid_initfn(USBDevice *dev) { USBCCIDState *s = DO_UPCAST(USBCCIDState, dev, dev); + usb_desc_init(dev); qbus_create_inplace(&s->bus.qbus, &ccid_bus_info, &dev->qdev, NULL); s->bus.qbus.allow_hotplug = 1; s->card = NULL; @@ -1381,6 +1299,7 @@ static struct USBDeviceInfo ccid_info = { .qdev.desc = "CCID Rev 1.1 smartcard reader", .qdev.size = sizeof(USBCCIDState), .init = ccid_initfn, + .usb_desc = &desc_ccid, .handle_packet = usb_generic_handle_packet, .handle_reset = ccid_handle_reset, .handle_control = ccid_handle_control, -- cgit v1.2.1