/* * QEMU SPAPR Dynamic Reconfiguration Connector Implementation * * Copyright IBM Corp. 2014 * * Authors: * Michael Roth * * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. */ #include "qemu/osdep.h" #include "qapi/error.h" #include "cpu.h" #include "qemu/cutils.h" #include "hw/ppc/spapr_drc.h" #include "qom/object.h" #include "hw/qdev.h" #include "qapi/visitor.h" #include "qemu/error-report.h" #include "hw/ppc/spapr.h" /* for RTAS return codes */ /* #define DEBUG_SPAPR_DRC */ #ifdef DEBUG_SPAPR_DRC #define DPRINTF(fmt, ...) \ do { fprintf(stderr, fmt, ## __VA_ARGS__); } while (0) #define DPRINTFN(fmt, ...) \ do { DPRINTF(fmt, ## __VA_ARGS__); fprintf(stderr, "\n"); } while (0) #else #define DPRINTF(fmt, ...) \ do { } while (0) #define DPRINTFN(fmt, ...) \ do { } while (0) #endif #define DRC_CONTAINER_PATH "/dr-connector" #define DRC_INDEX_TYPE_SHIFT 28 #define DRC_INDEX_ID_MASK ((1ULL << DRC_INDEX_TYPE_SHIFT) - 1) static sPAPRDRConnectorTypeShift get_type_shift(sPAPRDRConnectorType type) { uint32_t shift = 0; /* make sure this isn't SPAPR_DR_CONNECTOR_TYPE_ANY, or some * other wonky value. */ g_assert(is_power_of_2(type)); while (type != (1 << shift)) { shift++; } return shift; } static uint32_t get_index(sPAPRDRConnector *drc) { /* no set format for a drc index: it only needs to be globally * unique. this is how we encode the DRC type on bare-metal * however, so might as well do that here */ return (get_type_shift(drc->type) << DRC_INDEX_TYPE_SHIFT) | (drc->id & DRC_INDEX_ID_MASK); } static uint32_t set_isolation_state(sPAPRDRConnector *drc, sPAPRDRIsolationState state) { sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc); DPRINTFN("drc: %x, set_isolation_state: %x", get_index(drc), state); if (state == SPAPR_DR_ISOLATION_STATE_UNISOLATED) { /* cannot unisolate a non-existant resource, and, or resources * which are in an 'UNUSABLE' allocation state. (PAPR 2.7, 13.5.3.5) */ if (!drc->dev || drc->allocation_state == SPAPR_DR_ALLOCATION_STATE_UNUSABLE) { return RTAS_OUT_NO_SUCH_INDICATOR; } } drc->isolation_state = state; if (drc->isolation_state == SPAPR_DR_ISOLATION_STATE_ISOLATED) { /* if we're awaiting release, but still in an unconfigured state, * it's likely the guest is still in the process of configuring * the device and is transitioning the devices to an ISOLATED * state as a part of that process. so we only complete the * removal when this transition happens for a device in a * configured state, as suggested by the state diagram from * PAPR+ 2.7, 13.4 */ if (drc->awaiting_release) { if (drc->configured) { DPRINTFN("finalizing device removal"); drck->detach(drc, DEVICE(drc->dev), drc->detach_cb, drc->detach_cb_opaque, NULL); } else { DPRINTFN("deferring device removal on unconfigured device\n"); } } drc->configured = false; } return RTAS_OUT_SUCCESS; } static uint32_t set_indicator_state(sPAPRDRConnector *drc, sPAPRDRIndicatorState state) { DPRINTFN("drc: %x, set_indicator_state: %x", get_index(drc), state); drc->indicator_state = state; return RTAS_OUT_SUCCESS; } static uint32_t set_allocation_state(sPAPRDRConnector *drc, sPAPRDRAllocationState state) { sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc); DPRINTFN("drc: %x, set_allocation_state: %x", get_index(drc), state); if (state == SPAPR_DR_ALLOCATION_STATE_USABLE) { /* if there's no resource/device associated with the DRC, there's * no way for us to put it in an allocation state consistent with * being 'USABLE'. PAPR 2.7, 13.5.3.4 documents that this should * result in an RTAS return code of -3 / "no such indicator" */ if (!drc->dev) { return RTAS_OUT_NO_SUCH_INDICATOR; } } if (drc->type != SPAPR_DR_CONNECTOR_TYPE_PCI) { drc->allocation_state = state; if (drc->awaiting_release && drc->allocation_state == SPAPR_DR_ALLOCATION_STATE_UNUSABLE) { DPRINTFN("finalizing device removal"); drck->detach(drc, DEVICE(drc->dev), drc->detach_cb, drc->detach_cb_opaque, NULL); } } return RTAS_OUT_SUCCESS; } static uint32_t get_type(sPAPRDRConnector *drc) { return drc->type; } static const char *get_name(sPAPRDRConnector *drc) { return drc->name; } static const void *get_fdt(sPAPRDRConnector *drc, int *fdt_start_offset) { if (fdt_start_offset) { *fdt_start_offset = drc->fdt_start_offset; } return drc->fdt; } static void set_configured(sPAPRDRConnector *drc) { DPRINTFN("drc: %x, set_configured", get_index(drc)); if (drc->isolation_state != SPAPR_DR_ISOLATION_STATE_UNISOLATED) { /* guest should be not configuring an isolated device */ DPRINTFN("drc: %x, set_configured: skipping isolated device", get_index(drc)); return; } drc->configured = true; } /* has the guest been notified of device attachment? */ static void set_signalled(sPAPRDRConnector *drc) { drc->signalled = true; } /* * dr-entity-sense sensor value * returned via get-sensor-state RTAS calls * as expected by state diagram in PAPR+ 2.7, 13.4 * based on the current allocation/indicator/power states * for the DR connector. */ static uint32_t entity_sense(sPAPRDRConnector *drc, sPAPRDREntitySense *state) { if (drc->dev) { if (drc->type != SPAPR_DR_CONNECTOR_TYPE_PCI && drc->allocation_state == SPAPR_DR_ALLOCATION_STATE_UNUSABLE) { /* for logical DR, we return a state of UNUSABLE * iff the allocation state UNUSABLE. * Otherwise, report the state as USABLE/PRESENT, * as we would for PCI. */ *state = SPAPR_DR_ENTITY_SENSE_UNUSABLE; } else { /* this assumes all PCI devices are assigned to * a 'live insertion' power domain, where QEMU * manages power state automatically as opposed * to the guest. present, non-PCI resources are * unaffected by power state. */ *state = SPAPR_DR_ENTITY_SENSE_PRESENT; } } else { if (drc->type == SPAPR_DR_CONNECTOR_TYPE_PCI) { /* PCI devices, and only PCI devices, use EMPTY * in cases where we'd otherwise use UNUSABLE */ *state = SPAPR_DR_ENTITY_SENSE_EMPTY; } else { *state = SPAPR_DR_ENTITY_SENSE_UNUSABLE; } } DPRINTFN("drc: %x, entity_sense: %x", get_index(drc), state); return RTAS_OUT_SUCCESS; } static void prop_get_index(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { sPAPRDRConnector *drc = SPAPR_DR_CONNECTOR(obj); sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc); uint32_t value = (uint32_t)drck->get_index(drc); visit_type_uint32(v, name, &value, errp); } static void prop_get_type(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { sPAPRDRConnector *drc = SPAPR_DR_CONNECTOR(obj); sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc); uint32_t value = (uint32_t)drck->get_type(drc); visit_type_uint32(v, name, &value, errp); } static char *prop_get_name(Object *obj, Error **errp) { sPAPRDRConnector *drc = SPAPR_DR_CONNECTOR(obj); sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc); return g_strdup(drck->get_name(drc)); } static void prop_get_entity_sense(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { sPAPRDRConnector *drc = SPAPR_DR_CONNECTOR(obj); sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc); uint32_t value; drck->entity_sense(drc, &value); visit_type_uint32(v, name, &value, errp); } static void prop_get_fdt(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { sPAPRDRConnector *drc = SPAPR_DR_CONNECTOR(obj); Error *err = NULL; int fdt_offset_next, fdt_offset, fdt_depth; void *fdt; if (!drc->fdt) { visit_type_null(v, NULL, errp); return; } fdt = drc->fdt; fdt_offset = drc->fdt_start_offset; fdt_depth = 0; do { const char *name = NULL; const struct fdt_property *prop = NULL; int prop_len = 0, name_len = 0; uint32_t tag; tag = fdt_next_tag(fdt, fdt_offset, &fdt_offset_next); switch (tag) { case FDT_BEGIN_NODE: fdt_depth++; name = fdt_get_name(fdt, fdt_offset, &name_len); visit_start_struct(v, name, NULL, 0, &err); if (err) { error_propagate(errp, err); return; } break; case FDT_END_NODE: /* shouldn't ever see an FDT_END_NODE before FDT_BEGIN_NODE */ g_assert(fdt_depth > 0); visit_check_struct(v, &err); visit_end_struct(v); if (err) { error_propagate(errp, err); return; } fdt_depth--; break; case FDT_PROP: { int i; prop = fdt_get_property_by_offset(fdt, fdt_offset, &prop_len); name = fdt_string(fdt, fdt32_to_cpu(prop->nameoff)); visit_start_list(v, name, NULL, 0, &err); if (err) { error_propagate(errp, err); return; } for (i = 0; i < prop_len; i++) { visit_type_uint8(v, NULL, (uint8_t *)&prop->data[i], &err); if (err) { error_propagate(errp, err); return; } } visit_end_list(v); break; } default: error_setg(&error_abort, "device FDT in unexpected state: %d", tag); } fdt_offset = fdt_offset_next; } while (fdt_depth != 0); } static void attach(sPAPRDRConnector *drc, DeviceState *d, void *fdt, int fdt_start_offset, bool coldplug, Error **errp) { DPRINTFN("drc: %x, attach", get_index(drc)); if (drc->isolation_state != SPAPR_DR_ISOLATION_STATE_ISOLATED) { error_setg(errp, "an attached device is still awaiting release"); return; } if (drc->type == SPAPR_DR_CONNECTOR_TYPE_PCI) { g_assert(drc->allocation_state == SPAPR_DR_ALLOCATION_STATE_USABLE); } g_assert(fdt || coldplug); /* NOTE: setting initial isolation state to UNISOLATED means we can't * detach unless guest has a userspace/kernel that moves this state * back to ISOLATED in response to an unplug event, or this is done * manually by the admin prior. if we force things while the guest * may be accessing the device, we can easily crash the guest, so we * we defer completion of removal in such cases to the reset() hook. */ if (drc->type == SPAPR_DR_CONNECTOR_TYPE_PCI) { drc->isolation_state = SPAPR_DR_ISOLATION_STATE_UNISOLATED; } drc->indicator_state = SPAPR_DR_INDICATOR_STATE_ACTIVE; drc->dev = d; drc->fdt = fdt; drc->fdt_start_offset = fdt_start_offset; drc->configured = coldplug; /* 'logical' DR resources such as memory/cpus are in some cases treated * as a pool of resources from which the guest is free to choose from * based on only a count. for resources that can be assigned in this * fashion, we must assume the resource is signalled immediately * since a single hotplug request might make an arbitrary number of * such attached resources available to the guest, as opposed to * 'physical' DR resources such as PCI where each device/resource is * signalled individually. */ drc->signalled = (drc->type != SPAPR_DR_CONNECTOR_TYPE_PCI) ? true : coldplug; object_property_add_link(OBJECT(drc), "device", object_get_typename(OBJECT(drc->dev)), (Object **)(&drc->dev), NULL, 0, NULL); } static void detach(sPAPRDRConnector *drc, DeviceState *d, spapr_drc_detach_cb *detach_cb, void *detach_cb_opaque, Error **errp) { DPRINTFN("drc: %x, detach", get_index(drc)); drc->detach_cb = detach_cb; drc->detach_cb_opaque = detach_cb_opaque; /* if we've signalled device presence to the guest, or if the guest * has gone ahead and configured the device (via manually-executed * device add via drmgr in guest, namely), we need to wait * for the guest to quiesce the device before completing detach. * Otherwise, we can assume the guest hasn't seen it and complete the * detach immediately. Note that there is a small race window * just before, or during, configuration, which is this context * refers mainly to fetching the device tree via RTAS. * During this window the device access will be arbitrated by * associated DRC, which will simply fail the RTAS calls as invalid. * This is recoverable within guest and current implementations of * drmgr should be able to cope. */ if (!drc->signalled && !drc->configured) { /* if the guest hasn't seen the device we can't rely on it to * set it back to an isolated state via RTAS, so do it here manually */ drc->isolation_state = SPAPR_DR_ISOLATION_STATE_ISOLATED; } if (drc->isolation_state != SPAPR_DR_ISOLATION_STATE_ISOLATED) { DPRINTFN("awaiting transition to isolated state before removal"); drc->awaiting_release = true; return; } if (drc->type != SPAPR_DR_CONNECTOR_TYPE_PCI && drc->allocation_state != SPAPR_DR_ALLOCATION_STATE_UNUSABLE) { DPRINTFN("awaiting transition to unusable state before removal"); drc->awaiting_release = true; return; } drc->indicator_state = SPAPR_DR_INDICATOR_STATE_INACTIVE; if (drc->detach_cb) { drc->detach_cb(drc->dev, drc->detach_cb_opaque); } drc->awaiting_release = false; g_free(drc->fdt); drc->fdt = NULL; drc->fdt_start_offset = 0; object_property_del(OBJECT(drc), "device", NULL); drc->dev = NULL; drc->detach_cb = NULL; drc->detach_cb_opaque = NULL; } static bool release_pending(sPAPRDRConnector *drc) { return drc->awaiting_release; } static void reset(DeviceState *d) { sPAPRDRConnector *drc = SPAPR_DR_CONNECTOR(d); sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc); sPAPRDREntitySense state; DPRINTFN("drc reset: %x", drck->get_index(drc)); /* immediately upon reset we can safely assume DRCs whose devices * are pending removal can be safely removed, and that they will * subsequently be left in an ISOLATED state. move the DRC to this * state in these cases (which will in turn complete any pending * device removals) */ if (drc->awaiting_release) { drck->set_isolation_state(drc, SPAPR_DR_ISOLATION_STATE_ISOLATED); /* generally this should also finalize the removal, but if the device * hasn't yet been configured we normally defer removal under the * assumption that this transition is taking place as part of device * configuration. so check if we're still waiting after this, and * force removal if we are */ if (drc->awaiting_release) { drck->detach(drc, DEVICE(drc->dev), drc->detach_cb, drc->detach_cb_opaque, NULL); } /* non-PCI devices may be awaiting a transition to UNUSABLE */ if (drc->type != SPAPR_DR_CONNECTOR_TYPE_PCI && drc->awaiting_release) { drck->set_allocation_state(drc, SPAPR_DR_ALLOCATION_STATE_UNUSABLE); } } drck->entity_sense(drc, &state); if (state == SPAPR_DR_ENTITY_SENSE_PRESENT) { drck->set_signalled(drc); } } static void realize(DeviceState *d, Error **errp) { sPAPRDRConnector *drc = SPAPR_DR_CONNECTOR(d); sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc); Object *root_container; char link_name[256]; gchar *child_name; Error *err = NULL; DPRINTFN("drc realize: %x", drck->get_index(drc)); /* NOTE: we do this as part of realize/unrealize due to the fact * that the guest will communicate with the DRC via RTAS calls * referencing the global DRC index. By unlinking the DRC * from DRC_CONTAINER_PATH/ we effectively make it * inaccessible by the guest, since lookups rely on this path * existing in the composition tree */ root_container = container_get(object_get_root(), DRC_CONTAINER_PATH); snprintf(link_name, sizeof(link_name), "%x", drck->get_index(drc)); child_name = object_get_canonical_path_component(OBJECT(drc)); DPRINTFN("drc child name: %s", child_name); object_property_add_alias(root_container, link_name, drc->owner, child_name, &err); if (err) { error_report_err(err); object_unref(OBJECT(drc)); } g_free(child_name); DPRINTFN("drc realize complete"); } static void unrealize(DeviceState *d, Error **errp) { sPAPRDRConnector *drc = SPAPR_DR_CONNECTOR(d); sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc); Object *root_container; char name[256]; Error *err = NULL; DPRINTFN("drc unrealize: %x", drck->get_index(drc)); root_container = container_get(object_get_root(), DRC_CONTAINER_PATH); snprintf(name, sizeof(name), "%x", drck->get_index(drc)); object_property_del(root_container, name, &err); if (err) { error_report_err(err); object_unref(OBJECT(drc)); } } sPAPRDRConnector *spapr_dr_connector_new(Object *owner, sPAPRDRConnectorType type, uint32_t id) { sPAPRDRConnector *drc = SPAPR_DR_CONNECTOR(object_new(TYPE_SPAPR_DR_CONNECTOR)); char *prop_name; g_assert(type); drc->type = type; drc->id = id; drc->owner = owner; prop_name = g_strdup_printf("dr-connector[%"PRIu32"]", get_index(drc)); object_property_add_child(owner, prop_name, OBJECT(drc), NULL); object_property_set_bool(OBJECT(drc), true, "realized", NULL); g_free(prop_name); /* human-readable name for a DRC to encode into the DT * description. this is mainly only used within a guest in place * of the unique DRC index. * * in the case of VIO/PCI devices, it corresponds to a * "location code" that maps a logical device/function (DRC index) * to a physical (or virtual in the case of VIO) location in the * system by chaining together the "location label" for each * encapsulating component. * * since this is more to do with diagnosing physical hardware * issues than guest compatibility, we choose location codes/DRC * names that adhere to the documented format, but avoid encoding * the entire topology information into the label/code, instead * just using the location codes based on the labels for the * endpoints (VIO/PCI adaptor connectors), which is basically * just "C" followed by an integer ID. * * DRC names as documented by PAPR+ v2.7, 13.5.2.4 * location codes as documented by PAPR+ v2.7, 12.3.1.5 */ switch (drc->type) { case SPAPR_DR_CONNECTOR_TYPE_CPU: drc->name = g_strdup_printf("CPU %d", id); break; case SPAPR_DR_CONNECTOR_TYPE_PHB: drc->name = g_strdup_printf("PHB %d", id); break; case SPAPR_DR_CONNECTOR_TYPE_VIO: case SPAPR_DR_CONNECTOR_TYPE_PCI: drc->name = g_strdup_printf("C%d", id); break; case SPAPR_DR_CONNECTOR_TYPE_LMB: drc->name = g_strdup_printf("LMB %d", id); break; default: g_assert(false); } /* PCI slot always start in a USABLE state, and stay there */ if (drc->type == SPAPR_DR_CONNECTOR_TYPE_PCI) { drc->allocation_state = SPAPR_DR_ALLOCATION_STATE_USABLE; } return drc; } static void spapr_dr_connector_instance_init(Object *obj) { sPAPRDRConnector *drc = SPAPR_DR_CONNECTOR(obj); object_property_add_uint32_ptr(obj, "isolation-state", &drc->isolation_state, NULL); object_property_add_uint32_ptr(obj, "indicator-state", &drc->indicator_state, NULL); object_property_add_uint32_ptr(obj, "allocation-state", &drc->allocation_state, NULL); object_property_add_uint32_ptr(obj, "id", &drc->id, NULL); object_property_add(obj, "index", "uint32", prop_get_index, NULL, NULL, NULL, NULL); object_property_add(obj, "connector_type", "uint32", prop_get_type, NULL, NULL, NULL, NULL); object_property_add_str(obj, "name", prop_get_name, NULL, NULL); object_property_add(obj, "entity-sense", "uint32", prop_get_entity_sense, NULL, NULL, NULL, NULL); object_property_add(obj, "fdt", "struct", prop_get_fdt, NULL, NULL, NULL, NULL); } static void spapr_dr_connector_class_init(ObjectClass *k, void *data) { DeviceClass *dk = DEVICE_CLASS(k); sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_CLASS(k); dk->reset = reset; dk->realize = realize; dk->unrealize = unrealize; drck->set_isolation_state = set_isolation_state; drck->set_indicator_state = set_indicator_state; drck->set_allocation_state = set_allocation_state; drck->get_index = get_index; drck->get_type = get_type; drck->get_name = get_name; drck->get_fdt = get_fdt; drck->set_configured = set_configured; drck->entity_sense = entity_sense; drck->attach = attach; drck->detach = detach; drck->release_pending = release_pending; drck->set_signalled = set_signalled; /* * Reason: it crashes FIXME find and document the real reason */ dk->cannot_instantiate_with_device_add_yet = true; } static const TypeInfo spapr_dr_connector_info = { .name = TYPE_SPAPR_DR_CONNECTOR, .parent = TYPE_DEVICE, .instance_size = sizeof(sPAPRDRConnector), .instance_init = spapr_dr_connector_instance_init, .class_size = sizeof(sPAPRDRConnectorClass), .class_init = spapr_dr_connector_class_init, }; static void spapr_drc_register_types(void) { type_register_static(&spapr_dr_connector_info); } type_init(spapr_drc_register_types) /* helper functions for external users */ sPAPRDRConnector *spapr_dr_connector_by_index(uint32_t index) { Object *obj; char name[256]; snprintf(name, sizeof(name), "%s/%x", DRC_CONTAINER_PATH, index); obj = object_resolve_path(name, NULL); return !obj ? NULL : SPAPR_DR_CONNECTOR(obj); } sPAPRDRConnector *spapr_dr_connector_by_id(sPAPRDRConnectorType type, uint32_t id) { return spapr_dr_connector_by_index( (get_type_shift(type) << DRC_INDEX_TYPE_SHIFT) | (id & DRC_INDEX_ID_MASK)); } /* generate a string the describes the DRC to encode into the * device tree. * * as documented by PAPR+ v2.7, 13.5.2.6 and C.6.1 */ static const char *spapr_drc_get_type_str(sPAPRDRConnectorType type) { switch (type) { case SPAPR_DR_CONNECTOR_TYPE_CPU: return "CPU"; case SPAPR_DR_CONNECTOR_TYPE_PHB: return "PHB"; case SPAPR_DR_CONNECTOR_TYPE_VIO: return "SLOT"; case SPAPR_DR_CONNECTOR_TYPE_PCI: return "28"; case SPAPR_DR_CONNECTOR_TYPE_LMB: return "MEM"; default: g_assert(false); } return NULL; } /** * spapr_drc_populate_dt * * @fdt: libfdt device tree * @path: path in the DT to generate properties * @owner: parent Object/DeviceState for which to generate DRC * descriptions for * @drc_type_mask: mask of sPAPRDRConnectorType values corresponding * to the types of DRCs to generate entries for * * generate OF properties to describe DRC topology/indices to guests * * as documented in PAPR+ v2.1, 13.5.2 */ int spapr_drc_populate_dt(void *fdt, int fdt_offset, Object *owner, uint32_t drc_type_mask) { Object *root_container; ObjectProperty *prop; ObjectPropertyIterator iter; uint32_t drc_count = 0; GArray *drc_indexes, *drc_power_domains; GString *drc_names, *drc_types; int ret; /* the first entry of each properties is a 32-bit integer encoding * the number of elements in the array. we won't know this until * we complete the iteration through all the matching DRCs, but * reserve the space now and set the offsets accordingly so we * can fill them in later. */ drc_indexes = g_array_new(false, true, sizeof(uint32_t)); drc_indexes = g_array_set_size(drc_indexes, 1); drc_power_domains = g_array_new(false, true, sizeof(uint32_t)); drc_power_domains = g_array_set_size(drc_power_domains, 1); drc_names = g_string_set_size(g_string_new(NULL), sizeof(uint32_t)); drc_types = g_string_set_size(g_string_new(NULL), sizeof(uint32_t)); /* aliases for all DRConnector objects will be rooted in QOM * composition tree at DRC_CONTAINER_PATH */ root_container = container_get(object_get_root(), DRC_CONTAINER_PATH); object_property_iter_init(&iter, root_container); while ((prop = object_property_iter_next(&iter))) { Object *obj; sPAPRDRConnector *drc; sPAPRDRConnectorClass *drck; uint32_t drc_index, drc_power_domain; if (!strstart(prop->type, "link<", NULL)) { continue; } obj = object_property_get_link(root_container, prop->name, NULL); drc = SPAPR_DR_CONNECTOR(obj); drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc); if (owner && (drc->owner != owner)) { continue; } if ((drc->type & drc_type_mask) == 0) { continue; } drc_count++; /* ibm,drc-indexes */ drc_index = cpu_to_be32(drck->get_index(drc)); g_array_append_val(drc_indexes, drc_index); /* ibm,drc-power-domains */ drc_power_domain = cpu_to_be32(-1); g_array_append_val(drc_power_domains, drc_power_domain); /* ibm,drc-names */ drc_names = g_string_append(drc_names, drck->get_name(drc)); drc_names = g_string_insert_len(drc_names, -1, "\0", 1); /* ibm,drc-types */ drc_types = g_string_append(drc_types, spapr_drc_get_type_str(drc->type)); drc_types = g_string_insert_len(drc_types, -1, "\0", 1); } /* now write the drc count into the space we reserved at the * beginning of the arrays previously */ *(uint32_t *)drc_indexes->data = cpu_to_be32(drc_count); *(uint32_t *)drc_power_domains->data = cpu_to_be32(drc_count); *(uint32_t *)drc_names->str = cpu_to_be32(drc_count); *(uint32_t *)drc_types->str = cpu_to_be32(drc_count); ret = fdt_setprop(fdt, fdt_offset, "ibm,drc-indexes", drc_indexes->data, drc_indexes->len * sizeof(uint32_t)); if (ret) { fprintf(stderr, "Couldn't create ibm,drc-indexes property\n"); goto out; } ret = fdt_setprop(fdt, fdt_offset, "ibm,drc-power-domains", drc_power_domains->data, drc_power_domains->len * sizeof(uint32_t)); if (ret) { fprintf(stderr, "Couldn't finalize ibm,drc-power-domains property\n"); goto out; } ret = fdt_setprop(fdt, fdt_offset, "ibm,drc-names", drc_names->str, drc_names->len); if (ret) { fprintf(stderr, "Couldn't finalize ibm,drc-names property\n"); goto out; } ret = fdt_setprop(fdt, fdt_offset, "ibm,drc-types", drc_types->str, drc_types->len); if (ret) { fprintf(stderr, "Couldn't finalize ibm,drc-types property\n"); goto out; } out: g_array_free(drc_indexes, true); g_array_free(drc_power_domains, true); g_string_free(drc_names, true); g_string_free(drc_types, true); return ret; }