/* * RDMA protocol and interfaces * * Copyright IBM, Corp. 2010-2013 * * Authors: * Michael R. Hines * Jiuxing Liu * * This work is licensed under the terms of the GNU GPL, version 2 or * later. See the COPYING file in the top-level directory. * */ #include "qemu-common.h" #include "migration/migration.h" #include "migration/qemu-file.h" #include "exec/cpu-common.h" #include "qemu/main-loop.h" #include "qemu/sockets.h" #include "qemu/bitmap.h" #include "block/coroutine.h" #include #include #include #include #include #include #include //#define DEBUG_RDMA //#define DEBUG_RDMA_VERBOSE //#define DEBUG_RDMA_REALLY_VERBOSE #ifdef DEBUG_RDMA #define DPRINTF(fmt, ...) \ do { printf("rdma: " fmt, ## __VA_ARGS__); } while (0) #else #define DPRINTF(fmt, ...) \ do { } while (0) #endif #ifdef DEBUG_RDMA_VERBOSE #define DDPRINTF(fmt, ...) \ do { printf("rdma: " fmt, ## __VA_ARGS__); } while (0) #else #define DDPRINTF(fmt, ...) \ do { } while (0) #endif #ifdef DEBUG_RDMA_REALLY_VERBOSE #define DDDPRINTF(fmt, ...) \ do { printf("rdma: " fmt, ## __VA_ARGS__); } while (0) #else #define DDDPRINTF(fmt, ...) \ do { } while (0) #endif /* * Print and error on both the Monitor and the Log file. */ #define ERROR(errp, fmt, ...) \ do { \ fprintf(stderr, "RDMA ERROR: " fmt "\n", ## __VA_ARGS__); \ if (errp && (*(errp) == NULL)) { \ error_setg(errp, "RDMA ERROR: " fmt, ## __VA_ARGS__); \ } \ } while (0) #define RDMA_RESOLVE_TIMEOUT_MS 10000 /* Do not merge data if larger than this. */ #define RDMA_MERGE_MAX (2 * 1024 * 1024) #define RDMA_SIGNALED_SEND_MAX (RDMA_MERGE_MAX / 4096) #define RDMA_REG_CHUNK_SHIFT 20 /* 1 MB */ /* * This is only for non-live state being migrated. * Instead of RDMA_WRITE messages, we use RDMA_SEND * messages for that state, which requires a different * delivery design than main memory. */ #define RDMA_SEND_INCREMENT 32768 /* * Maximum size infiniband SEND message */ #define RDMA_CONTROL_MAX_BUFFER (512 * 1024) #define RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE 4096 #define RDMA_CONTROL_VERSION_CURRENT 1 /* * Capabilities for negotiation. */ #define RDMA_CAPABILITY_PIN_ALL 0x01 /* * Add the other flags above to this list of known capabilities * as they are introduced. */ static uint32_t known_capabilities = RDMA_CAPABILITY_PIN_ALL; #define CHECK_ERROR_STATE() \ do { \ if (rdma->error_state) { \ if (!rdma->error_reported) { \ fprintf(stderr, "RDMA is in an error state waiting migration" \ " to abort!\n"); \ rdma->error_reported = 1; \ } \ return rdma->error_state; \ } \ } while (0); /* * A work request ID is 64-bits and we split up these bits * into 3 parts: * * bits 0-15 : type of control message, 2^16 * bits 16-29: ram block index, 2^14 * bits 30-63: ram block chunk number, 2^34 * * The last two bit ranges are only used for RDMA writes, * in order to track their completion and potentially * also track unregistration status of the message. */ #define RDMA_WRID_TYPE_SHIFT 0UL #define RDMA_WRID_BLOCK_SHIFT 16UL #define RDMA_WRID_CHUNK_SHIFT 30UL #define RDMA_WRID_TYPE_MASK \ ((1UL << RDMA_WRID_BLOCK_SHIFT) - 1UL) #define RDMA_WRID_BLOCK_MASK \ (~RDMA_WRID_TYPE_MASK & ((1UL << RDMA_WRID_CHUNK_SHIFT) - 1UL)) #define RDMA_WRID_CHUNK_MASK (~RDMA_WRID_BLOCK_MASK & ~RDMA_WRID_TYPE_MASK) /* * RDMA migration protocol: * 1. RDMA Writes (data messages, i.e. RAM) * 2. IB Send/Recv (control channel messages) */ enum { RDMA_WRID_NONE = 0, RDMA_WRID_RDMA_WRITE = 1, RDMA_WRID_SEND_CONTROL = 2000, RDMA_WRID_RECV_CONTROL = 4000, }; const char *wrid_desc[] = { [RDMA_WRID_NONE] = "NONE", [RDMA_WRID_RDMA_WRITE] = "WRITE RDMA", [RDMA_WRID_SEND_CONTROL] = "CONTROL SEND", [RDMA_WRID_RECV_CONTROL] = "CONTROL RECV", }; /* * Work request IDs for IB SEND messages only (not RDMA writes). * This is used by the migration protocol to transmit * control messages (such as device state and registration commands) * * We could use more WRs, but we have enough for now. */ enum { RDMA_WRID_READY = 0, RDMA_WRID_DATA, RDMA_WRID_CONTROL, RDMA_WRID_MAX, }; /* * SEND/RECV IB Control Messages. */ enum { RDMA_CONTROL_NONE = 0, RDMA_CONTROL_ERROR, RDMA_CONTROL_READY, /* ready to receive */ RDMA_CONTROL_QEMU_FILE, /* QEMUFile-transmitted bytes */ RDMA_CONTROL_RAM_BLOCKS_REQUEST, /* RAMBlock synchronization */ RDMA_CONTROL_RAM_BLOCKS_RESULT, /* RAMBlock synchronization */ RDMA_CONTROL_COMPRESS, /* page contains repeat values */ RDMA_CONTROL_REGISTER_REQUEST, /* dynamic page registration */ RDMA_CONTROL_REGISTER_RESULT, /* key to use after registration */ RDMA_CONTROL_REGISTER_FINISHED, /* current iteration finished */ RDMA_CONTROL_UNREGISTER_REQUEST, /* dynamic UN-registration */ RDMA_CONTROL_UNREGISTER_FINISHED, /* unpinning finished */ }; const char *control_desc[] = { [RDMA_CONTROL_NONE] = "NONE", [RDMA_CONTROL_ERROR] = "ERROR", [RDMA_CONTROL_READY] = "READY", [RDMA_CONTROL_QEMU_FILE] = "QEMU FILE", [RDMA_CONTROL_RAM_BLOCKS_REQUEST] = "RAM BLOCKS REQUEST", [RDMA_CONTROL_RAM_BLOCKS_RESULT] = "RAM BLOCKS RESULT", [RDMA_CONTROL_COMPRESS] = "COMPRESS", [RDMA_CONTROL_REGISTER_REQUEST] = "REGISTER REQUEST", [RDMA_CONTROL_REGISTER_RESULT] = "REGISTER RESULT", [RDMA_CONTROL_REGISTER_FINISHED] = "REGISTER FINISHED", [RDMA_CONTROL_UNREGISTER_REQUEST] = "UNREGISTER REQUEST", [RDMA_CONTROL_UNREGISTER_FINISHED] = "UNREGISTER FINISHED", }; /* * Memory and MR structures used to represent an IB Send/Recv work request. * This is *not* used for RDMA writes, only IB Send/Recv. */ typedef struct { uint8_t control[RDMA_CONTROL_MAX_BUFFER]; /* actual buffer to register */ struct ibv_mr *control_mr; /* registration metadata */ size_t control_len; /* length of the message */ uint8_t *control_curr; /* start of unconsumed bytes */ } RDMAWorkRequestData; /* * Negotiate RDMA capabilities during connection-setup time. */ typedef struct { uint32_t version; uint32_t flags; } RDMACapabilities; static void caps_to_network(RDMACapabilities *cap) { cap->version = htonl(cap->version); cap->flags = htonl(cap->flags); } static void network_to_caps(RDMACapabilities *cap) { cap->version = ntohl(cap->version); cap->flags = ntohl(cap->flags); } /* * Representation of a RAMBlock from an RDMA perspective. * This is not transmitted, only local. * This and subsequent structures cannot be linked lists * because we're using a single IB message to transmit * the information. It's small anyway, so a list is overkill. */ typedef struct RDMALocalBlock { uint8_t *local_host_addr; /* local virtual address */ uint64_t remote_host_addr; /* remote virtual address */ uint64_t offset; uint64_t length; struct ibv_mr **pmr; /* MRs for chunk-level registration */ struct ibv_mr *mr; /* MR for non-chunk-level registration */ uint32_t *remote_keys; /* rkeys for chunk-level registration */ uint32_t remote_rkey; /* rkeys for non-chunk-level registration */ int index; /* which block are we */ bool is_ram_block; int nb_chunks; unsigned long *transit_bitmap; unsigned long *unregister_bitmap; } RDMALocalBlock; /* * Also represents a RAMblock, but only on the dest. * This gets transmitted by the dest during connection-time * to the source VM and then is used to populate the * corresponding RDMALocalBlock with * the information needed to perform the actual RDMA. */ typedef struct QEMU_PACKED RDMARemoteBlock { uint64_t remote_host_addr; uint64_t offset; uint64_t length; uint32_t remote_rkey; uint32_t padding; } RDMARemoteBlock; static uint64_t htonll(uint64_t v) { union { uint32_t lv[2]; uint64_t llv; } u; u.lv[0] = htonl(v >> 32); u.lv[1] = htonl(v & 0xFFFFFFFFULL); return u.llv; } static uint64_t ntohll(uint64_t v) { union { uint32_t lv[2]; uint64_t llv; } u; u.llv = v; return ((uint64_t)ntohl(u.lv[0]) << 32) | (uint64_t) ntohl(u.lv[1]); } static void remote_block_to_network(RDMARemoteBlock *rb) { rb->remote_host_addr = htonll(rb->remote_host_addr); rb->offset = htonll(rb->offset); rb->length = htonll(rb->length); rb->remote_rkey = htonl(rb->remote_rkey); } static void network_to_remote_block(RDMARemoteBlock *rb) { rb->remote_host_addr = ntohll(rb->remote_host_addr); rb->offset = ntohll(rb->offset); rb->length = ntohll(rb->length); rb->remote_rkey = ntohl(rb->remote_rkey); } /* * Virtual address of the above structures used for transmitting * the RAMBlock descriptions at connection-time. * This structure is *not* transmitted. */ typedef struct RDMALocalBlocks { int nb_blocks; bool init; /* main memory init complete */ RDMALocalBlock *block; } RDMALocalBlocks; /* * Main data structure for RDMA state. * While there is only one copy of this structure being allocated right now, * this is the place where one would start if you wanted to consider * having more than one RDMA connection open at the same time. */ typedef struct RDMAContext { char *host; int port; RDMAWorkRequestData wr_data[RDMA_WRID_MAX]; /* * This is used by *_exchange_send() to figure out whether or not * the initial "READY" message has already been received or not. * This is because other functions may potentially poll() and detect * the READY message before send() does, in which case we need to * know if it completed. */ int control_ready_expected; /* number of outstanding writes */ int nb_sent; /* store info about current buffer so that we can merge it with future sends */ uint64_t current_addr; uint64_t current_length; /* index of ram block the current buffer belongs to */ int current_index; /* index of the chunk in the current ram block */ int current_chunk; bool pin_all; /* * infiniband-specific variables for opening the device * and maintaining connection state and so forth. * * cm_id also has ibv_context, rdma_event_channel, and ibv_qp in * cm_id->verbs, cm_id->channel, and cm_id->qp. */ struct rdma_cm_id *cm_id; /* connection manager ID */ struct rdma_cm_id *listen_id; bool connected; struct ibv_context *verbs; struct rdma_event_channel *channel; struct ibv_qp *qp; /* queue pair */ struct ibv_comp_channel *comp_channel; /* completion channel */ struct ibv_pd *pd; /* protection domain */ struct ibv_cq *cq; /* completion queue */ /* * If a previous write failed (perhaps because of a failed * memory registration, then do not attempt any future work * and remember the error state. */ int error_state; int error_reported; /* * Description of ram blocks used throughout the code. */ RDMALocalBlocks local_ram_blocks; RDMARemoteBlock *block; /* * Migration on *destination* started. * Then use coroutine yield function. * Source runs in a thread, so we don't care. */ int migration_started_on_destination; int total_registrations; int total_writes; int unregister_current, unregister_next; uint64_t unregistrations[RDMA_SIGNALED_SEND_MAX]; GHashTable *blockmap; } RDMAContext; /* * Interface to the rest of the migration call stack. */ typedef struct QEMUFileRDMA { RDMAContext *rdma; size_t len; void *file; } QEMUFileRDMA; /* * Main structure for IB Send/Recv control messages. * This gets prepended at the beginning of every Send/Recv. */ typedef struct QEMU_PACKED { uint32_t len; /* Total length of data portion */ uint32_t type; /* which control command to perform */ uint32_t repeat; /* number of commands in data portion of same type */ uint32_t padding; } RDMAControlHeader; static void control_to_network(RDMAControlHeader *control) { control->type = htonl(control->type); control->len = htonl(control->len); control->repeat = htonl(control->repeat); } static void network_to_control(RDMAControlHeader *control) { control->type = ntohl(control->type); control->len = ntohl(control->len); control->repeat = ntohl(control->repeat); } /* * Register a single Chunk. * Information sent by the source VM to inform the dest * to register an single chunk of memory before we can perform * the actual RDMA operation. */ typedef struct QEMU_PACKED { union QEMU_PACKED { uint64_t current_addr; /* offset into the ramblock of the chunk */ uint64_t chunk; /* chunk to lookup if unregistering */ } key; uint32_t current_index; /* which ramblock the chunk belongs to */ uint32_t padding; uint64_t chunks; /* how many sequential chunks to register */ } RDMARegister; static void register_to_network(RDMARegister *reg) { reg->key.current_addr = htonll(reg->key.current_addr); reg->current_index = htonl(reg->current_index); reg->chunks = htonll(reg->chunks); } static void network_to_register(RDMARegister *reg) { reg->key.current_addr = ntohll(reg->key.current_addr); reg->current_index = ntohl(reg->current_index); reg->chunks = ntohll(reg->chunks); } typedef struct QEMU_PACKED { uint32_t value; /* if zero, we will madvise() */ uint32_t block_idx; /* which ram block index */ uint64_t offset; /* where in the remote ramblock this chunk */ uint64_t length; /* length of the chunk */ } RDMACompress; static void compress_to_network(RDMACompress *comp) { comp->value = htonl(comp->value); comp->block_idx = htonl(comp->block_idx); comp->offset = htonll(comp->offset); comp->length = htonll(comp->length); } static void network_to_compress(RDMACompress *comp) { comp->value = ntohl(comp->value); comp->block_idx = ntohl(comp->block_idx); comp->offset = ntohll(comp->offset); comp->length = ntohll(comp->length); } /* * The result of the dest's memory registration produces an "rkey" * which the source VM must reference in order to perform * the RDMA operation. */ typedef struct QEMU_PACKED { uint32_t rkey; uint32_t padding; uint64_t host_addr; } RDMARegisterResult; static void result_to_network(RDMARegisterResult *result) { result->rkey = htonl(result->rkey); result->host_addr = htonll(result->host_addr); }; static void network_to_result(RDMARegisterResult *result) { result->rkey = ntohl(result->rkey); result->host_addr = ntohll(result->host_addr); }; const char *print_wrid(int wrid); static int qemu_rdma_exchange_send(RDMAContext *rdma, RDMAControlHeader *head, uint8_t *data, RDMAControlHeader *resp, int *resp_idx, int (*callback)(RDMAContext *rdma)); static inline uint64_t ram_chunk_index(const uint8_t *start, const uint8_t *host) { return ((uintptr_t) host - (uintptr_t) start) >> RDMA_REG_CHUNK_SHIFT; } static inline uint8_t *ram_chunk_start(const RDMALocalBlock *rdma_ram_block, uint64_t i) { return (uint8_t *) (((uintptr_t) rdma_ram_block->local_host_addr) + (i << RDMA_REG_CHUNK_SHIFT)); } static inline uint8_t *ram_chunk_end(const RDMALocalBlock *rdma_ram_block, uint64_t i) { uint8_t *result = ram_chunk_start(rdma_ram_block, i) + (1UL << RDMA_REG_CHUNK_SHIFT); if (result > (rdma_ram_block->local_host_addr + rdma_ram_block->length)) { result = rdma_ram_block->local_host_addr + rdma_ram_block->length; } return result; } static int __qemu_rdma_add_block(RDMAContext *rdma, void *host_addr, ram_addr_t block_offset, uint64_t length) { RDMALocalBlocks *local = &rdma->local_ram_blocks; RDMALocalBlock *block = g_hash_table_lookup(rdma->blockmap, (void *) block_offset); RDMALocalBlock *old = local->block; assert(block == NULL); local->block = g_malloc0(sizeof(RDMALocalBlock) * (local->nb_blocks + 1)); if (local->nb_blocks) { int x; for (x = 0; x < local->nb_blocks; x++) { g_hash_table_remove(rdma->blockmap, (void *)old[x].offset); g_hash_table_insert(rdma->blockmap, (void *)old[x].offset, &local->block[x]); } memcpy(local->block, old, sizeof(RDMALocalBlock) * local->nb_blocks); g_free(old); } block = &local->block[local->nb_blocks]; block->local_host_addr = host_addr; block->offset = block_offset; block->length = length; block->index = local->nb_blocks; block->nb_chunks = ram_chunk_index(host_addr, host_addr + length) + 1UL; block->transit_bitmap = bitmap_new(block->nb_chunks); bitmap_clear(block->transit_bitmap, 0, block->nb_chunks); block->unregister_bitmap = bitmap_new(block->nb_chunks); bitmap_clear(block->unregister_bitmap, 0, block->nb_chunks); block->remote_keys = g_malloc0(block->nb_chunks * sizeof(uint32_t)); block->is_ram_block = local->init ? false : true; g_hash_table_insert(rdma->blockmap, (void *) block_offset, block); DDPRINTF("Added Block: %d, addr: %" PRIu64 ", offset: %" PRIu64 " length: %" PRIu64 " end: %" PRIu64 " bits %" PRIu64 " chunks %d\n", local->nb_blocks, (uint64_t) block->local_host_addr, block->offset, block->length, (uint64_t) (block->local_host_addr + block->length), BITS_TO_LONGS(block->nb_chunks) * sizeof(unsigned long) * 8, block->nb_chunks); local->nb_blocks++; return 0; } /* * Memory regions need to be registered with the device and queue pairs setup * in advanced before the migration starts. This tells us where the RAM blocks * are so that we can register them individually. */ static void qemu_rdma_init_one_block(void *host_addr, ram_addr_t block_offset, ram_addr_t length, void *opaque) { __qemu_rdma_add_block(opaque, host_addr, block_offset, length); } /* * Identify the RAMBlocks and their quantity. They will be references to * identify chunk boundaries inside each RAMBlock and also be referenced * during dynamic page registration. */ static int qemu_rdma_init_ram_blocks(RDMAContext *rdma) { RDMALocalBlocks *local = &rdma->local_ram_blocks; assert(rdma->blockmap == NULL); rdma->blockmap = g_hash_table_new(g_direct_hash, g_direct_equal); memset(local, 0, sizeof *local); qemu_ram_foreach_block(qemu_rdma_init_one_block, rdma); DPRINTF("Allocated %d local ram block structures\n", local->nb_blocks); rdma->block = (RDMARemoteBlock *) g_malloc0(sizeof(RDMARemoteBlock) * rdma->local_ram_blocks.nb_blocks); local->init = true; return 0; } static int __qemu_rdma_delete_block(RDMAContext *rdma, ram_addr_t block_offset) { RDMALocalBlocks *local = &rdma->local_ram_blocks; RDMALocalBlock *block = g_hash_table_lookup(rdma->blockmap, (void *) block_offset); RDMALocalBlock *old = local->block; int x; assert(block); if (block->pmr) { int j; for (j = 0; j < block->nb_chunks; j++) { if (!block->pmr[j]) { continue; } ibv_dereg_mr(block->pmr[j]); rdma->total_registrations--; } g_free(block->pmr); block->pmr = NULL; } if (block->mr) { ibv_dereg_mr(block->mr); rdma->total_registrations--; block->mr = NULL; } g_free(block->transit_bitmap); block->transit_bitmap = NULL; g_free(block->unregister_bitmap); block->unregister_bitmap = NULL; g_free(block->remote_keys); block->remote_keys = NULL; for (x = 0; x < local->nb_blocks; x++) { g_hash_table_remove(rdma->blockmap, (void *)old[x].offset); } if (local->nb_blocks > 1) { local->block = g_malloc0(sizeof(RDMALocalBlock) * (local->nb_blocks - 1)); if (block->index) { memcpy(local->block, old, sizeof(RDMALocalBlock) * block->index); } if (block->index < (local->nb_blocks - 1)) { memcpy(local->block + block->index, old + (block->index + 1), sizeof(RDMALocalBlock) * (local->nb_blocks - (block->index + 1))); } } else { assert(block == local->block); local->block = NULL; } DDPRINTF("Deleted Block: %d, addr: %" PRIu64 ", offset: %" PRIu64 " length: %" PRIu64 " end: %" PRIu64 " bits %" PRIu64 " chunks %d\n", local->nb_blocks, (uint64_t) block->local_host_addr, block->offset, block->length, (uint64_t) (block->local_host_addr + block->length), BITS_TO_LONGS(block->nb_chunks) * sizeof(unsigned long) * 8, block->nb_chunks); g_free(old); local->nb_blocks--; if (local->nb_blocks) { for (x = 0; x < local->nb_blocks; x++) { g_hash_table_insert(rdma->blockmap, (void *)local->block[x].offset, &local->block[x]); } } return 0; } /* * Put in the log file which RDMA device was opened and the details * associated with that device. */ static void qemu_rdma_dump_id(const char *who, struct ibv_context *verbs) { struct ibv_port_attr port; if (ibv_query_port(verbs, 1, &port)) { fprintf(stderr, "FAILED TO QUERY PORT INFORMATION!\n"); return; } printf("%s RDMA Device opened: kernel name %s " "uverbs device name %s, " "infiniband_verbs class device path %s, " "infiniband class device path %s, " "transport: (%d) %s\n", who, verbs->device->name, verbs->device->dev_name, verbs->device->dev_path, verbs->device->ibdev_path, port.link_layer, (port.link_layer == IBV_LINK_LAYER_INFINIBAND) ? "Infiniband" : ((port.link_layer == IBV_LINK_LAYER_ETHERNET) ? "Ethernet" : "Unknown")); } /* * Put in the log file the RDMA gid addressing information, * useful for folks who have trouble understanding the * RDMA device hierarchy in the kernel. */ static void qemu_rdma_dump_gid(const char *who, struct rdma_cm_id *id) { char sgid[33]; char dgid[33]; inet_ntop(AF_INET6, &id->route.addr.addr.ibaddr.sgid, sgid, sizeof sgid); inet_ntop(AF_INET6, &id->route.addr.addr.ibaddr.dgid, dgid, sizeof dgid); DPRINTF("%s Source GID: %s, Dest GID: %s\n", who, sgid, dgid); } /* * As of now, IPv6 over RoCE / iWARP is not supported by linux. * We will try the next addrinfo struct, and fail if there are * no other valid addresses to bind against. * * If user is listening on '[::]', then we will not have a opened a device * yet and have no way of verifying if the device is RoCE or not. * * In this case, the source VM will throw an error for ALL types of * connections (both IPv4 and IPv6) if the destination machine does not have * a regular infiniband network available for use. * * The only way to guarantee that an error is thrown for broken kernels is * for the management software to choose a *specific* interface at bind time * and validate what time of hardware it is. * * Unfortunately, this puts the user in a fix: * * If the source VM connects with an IPv4 address without knowing that the * destination has bound to '[::]' the migration will unconditionally fail * unless the management software is explicitly listening on the the IPv4 * address while using a RoCE-based device. * * If the source VM connects with an IPv6 address, then we're OK because we can * throw an error on the source (and similarly on the destination). * * But in mixed environments, this will be broken for a while until it is fixed * inside linux. * * We do provide a *tiny* bit of help in this function: We can list all of the * devices in the system and check to see if all the devices are RoCE or * Infiniband. * * If we detect that we have a *pure* RoCE environment, then we can safely * thrown an error even if the management software has specified '[::]' as the * bind address. * * However, if there is are multiple hetergeneous devices, then we cannot make * this assumption and the user just has to be sure they know what they are * doing. * * Patches are being reviewed on linux-rdma. */ static int qemu_rdma_broken_ipv6_kernel(Error **errp, struct ibv_context *verbs) { struct ibv_port_attr port_attr; /* This bug only exists in linux, to our knowledge. */ #ifdef CONFIG_LINUX /* * Verbs are only NULL if management has bound to '[::]'. * * Let's iterate through all the devices and see if there any pure IB * devices (non-ethernet). * * If not, then we can safely proceed with the migration. * Otherwise, there are no guarantees until the bug is fixed in linux. */ if (!verbs) { int num_devices, x; struct ibv_device ** dev_list = ibv_get_device_list(&num_devices); bool roce_found = false; bool ib_found = false; for (x = 0; x < num_devices; x++) { verbs = ibv_open_device(dev_list[x]); if (ibv_query_port(verbs, 1, &port_attr)) { ibv_close_device(verbs); ERROR(errp, "Could not query initial IB port"); return -EINVAL; } if (port_attr.link_layer == IBV_LINK_LAYER_INFINIBAND) { ib_found = true; } else if (port_attr.link_layer == IBV_LINK_LAYER_ETHERNET) { roce_found = true; } ibv_close_device(verbs); } if (roce_found) { if (ib_found) { fprintf(stderr, "WARN: migrations may fail:" " IPv6 over RoCE / iWARP in linux" " is broken. But since you appear to have a" " mixed RoCE / IB environment, be sure to only" " migrate over the IB fabric until the kernel " " fixes the bug.\n"); } else { ERROR(errp, "You only have RoCE / iWARP devices in your systems" " and your management software has specified '[::]'" ", but IPv6 over RoCE / iWARP is not supported in Linux."); return -ENONET; } } return 0; } /* * If we have a verbs context, that means that some other than '[::]' was * used by the management software for binding. In which case we can actually * warn the user about a potential broken kernel; */ /* IB ports start with 1, not 0 */ if (ibv_query_port(verbs, 1, &port_attr)) { ERROR(errp, "Could not query initial IB port"); return -EINVAL; } if (port_attr.link_layer == IBV_LINK_LAYER_ETHERNET) { ERROR(errp, "Linux kernel's RoCE / iWARP does not support IPv6 " "(but patches on linux-rdma in progress)"); return -ENONET; } #endif return 0; } /* * Figure out which RDMA device corresponds to the requested IP hostname * Also create the initial connection manager identifiers for opening * the connection. */ static int qemu_rdma_resolve_host(RDMAContext *rdma, Error **errp) { int ret; struct rdma_addrinfo *res; char port_str[16]; struct rdma_cm_event *cm_event; char ip[40] = "unknown"; struct rdma_addrinfo *e; if (rdma->host == NULL || !strcmp(rdma->host, "")) { ERROR(errp, "RDMA hostname has not been set"); return -EINVAL; } /* create CM channel */ rdma->channel = rdma_create_event_channel(); if (!rdma->channel) { ERROR(errp, "could not create CM channel"); return -EINVAL; } /* create CM id */ ret = rdma_create_id(rdma->channel, &rdma->cm_id, NULL, RDMA_PS_TCP); if (ret) { ERROR(errp, "could not create channel id"); goto err_resolve_create_id; } snprintf(port_str, 16, "%d", rdma->port); port_str[15] = '\0'; ret = rdma_getaddrinfo(rdma->host, port_str, NULL, &res); if (ret < 0) { ERROR(errp, "could not rdma_getaddrinfo address %s", rdma->host); goto err_resolve_get_addr; } for (e = res; e != NULL; e = e->ai_next) { inet_ntop(e->ai_family, &((struct sockaddr_in *) e->ai_dst_addr)->sin_addr, ip, sizeof ip); DPRINTF("Trying %s => %s\n", rdma->host, ip); ret = rdma_resolve_addr(rdma->cm_id, NULL, e->ai_dst_addr, RDMA_RESOLVE_TIMEOUT_MS); if (!ret) { if (e->ai_family == AF_INET6) { ret = qemu_rdma_broken_ipv6_kernel(errp, rdma->cm_id->verbs); if (ret) { continue; } } goto route; } } ERROR(errp, "could not resolve address %s", rdma->host); goto err_resolve_get_addr; route: qemu_rdma_dump_gid("source_resolve_addr", rdma->cm_id); ret = rdma_get_cm_event(rdma->channel, &cm_event); if (ret) { ERROR(errp, "could not perform event_addr_resolved"); goto err_resolve_get_addr; } if (cm_event->event != RDMA_CM_EVENT_ADDR_RESOLVED) { ERROR(errp, "result not equal to event_addr_resolved %s", rdma_event_str(cm_event->event)); perror("rdma_resolve_addr"); ret = -EINVAL; goto err_resolve_get_addr; } rdma_ack_cm_event(cm_event); /* resolve route */ ret = rdma_resolve_route(rdma->cm_id, RDMA_RESOLVE_TIMEOUT_MS); if (ret) { ERROR(errp, "could not resolve rdma route"); goto err_resolve_get_addr; } ret = rdma_get_cm_event(rdma->channel, &cm_event); if (ret) { ERROR(errp, "could not perform event_route_resolved"); goto err_resolve_get_addr; } if (cm_event->event != RDMA_CM_EVENT_ROUTE_RESOLVED) { ERROR(errp, "result not equal to event_route_resolved: %s", rdma_event_str(cm_event->event)); rdma_ack_cm_event(cm_event); ret = -EINVAL; goto err_resolve_get_addr; } rdma_ack_cm_event(cm_event); rdma->verbs = rdma->cm_id->verbs; qemu_rdma_dump_id("source_resolve_host", rdma->cm_id->verbs); qemu_rdma_dump_gid("source_resolve_host", rdma->cm_id); return 0; err_resolve_get_addr: rdma_destroy_id(rdma->cm_id); rdma->cm_id = NULL; err_resolve_create_id: rdma_destroy_event_channel(rdma->channel); rdma->channel = NULL; return ret; } /* * Create protection domain and completion queues */ static int qemu_rdma_alloc_pd_cq(RDMAContext *rdma) { /* allocate pd */ rdma->pd = ibv_alloc_pd(rdma->verbs); if (!rdma->pd) { fprintf(stderr, "failed to allocate protection domain\n"); return -1; } /* create completion channel */ rdma->comp_channel = ibv_create_comp_channel(rdma->verbs); if (!rdma->comp_channel) { fprintf(stderr, "failed to allocate completion channel\n"); goto err_alloc_pd_cq; } /* * Completion queue can be filled by both read and write work requests, * so must reflect the sum of both possible queue sizes. */ rdma->cq = ibv_create_cq(rdma->verbs, (RDMA_SIGNALED_SEND_MAX * 3), NULL, rdma->comp_channel, 0); if (!rdma->cq) { fprintf(stderr, "failed to allocate completion queue\n"); goto err_alloc_pd_cq; } return 0; err_alloc_pd_cq: if (rdma->pd) { ibv_dealloc_pd(rdma->pd); } if (rdma->comp_channel) { ibv_destroy_comp_channel(rdma->comp_channel); } rdma->pd = NULL; rdma->comp_channel = NULL; return -1; } /* * Create queue pairs. */ static int qemu_rdma_alloc_qp(RDMAContext *rdma) { struct ibv_qp_init_attr attr = { 0 }; int ret; attr.cap.max_send_wr = RDMA_SIGNALED_SEND_MAX; attr.cap.max_recv_wr = 3; attr.cap.max_send_sge = 1; attr.cap.max_recv_sge = 1; attr.send_cq = rdma->cq; attr.recv_cq = rdma->cq; attr.qp_type = IBV_QPT_RC; ret = rdma_create_qp(rdma->cm_id, rdma->pd, &attr); if (ret) { return -1; } rdma->qp = rdma->cm_id->qp; return 0; } static int qemu_rdma_reg_whole_ram_blocks(RDMAContext *rdma) { int i; RDMALocalBlocks *local = &rdma->local_ram_blocks; for (i = 0; i < local->nb_blocks; i++) { local->block[i].mr = ibv_reg_mr(rdma->pd, local->block[i].local_host_addr, local->block[i].length, IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE ); if (!local->block[i].mr) { perror("Failed to register local dest ram block!\n"); break; } rdma->total_registrations++; } if (i >= local->nb_blocks) { return 0; } for (i--; i >= 0; i--) { ibv_dereg_mr(local->block[i].mr); rdma->total_registrations--; } return -1; } /* * Find the ram block that corresponds to the page requested to be * transmitted by QEMU. * * Once the block is found, also identify which 'chunk' within that * block that the page belongs to. * * This search cannot fail or the migration will fail. */ static int qemu_rdma_search_ram_block(RDMAContext *rdma, uint64_t block_offset, uint64_t offset, uint64_t length, uint64_t *block_index, uint64_t *chunk_index) { uint64_t current_addr = block_offset + offset; RDMALocalBlock *block = g_hash_table_lookup(rdma->blockmap, (void *) block_offset); assert(block); assert(current_addr >= block->offset); assert((current_addr + length) <= (block->offset + block->length)); *block_index = block->index; *chunk_index = ram_chunk_index(block->local_host_addr, block->local_host_addr + (current_addr - block->offset)); return 0; } /* * Register a chunk with IB. If the chunk was already registered * previously, then skip. * * Also return the keys associated with the registration needed * to perform the actual RDMA operation. */ static int qemu_rdma_register_and_get_keys(RDMAContext *rdma, RDMALocalBlock *block, uint8_t *host_addr, uint32_t *lkey, uint32_t *rkey, int chunk, uint8_t *chunk_start, uint8_t *chunk_end) { if (block->mr) { if (lkey) { *lkey = block->mr->lkey; } if (rkey) { *rkey = block->mr->rkey; } return 0; } /* allocate memory to store chunk MRs */ if (!block->pmr) { block->pmr = g_malloc0(block->nb_chunks * sizeof(struct ibv_mr *)); if (!block->pmr) { return -1; } } /* * If 'rkey', then we're the destination, so grant access to the source. * * If 'lkey', then we're the source VM, so grant access only to ourselves. */ if (!block->pmr[chunk]) { uint64_t len = chunk_end - chunk_start; DDPRINTF("Registering %" PRIu64 " bytes @ %p\n", len, chunk_start); block->pmr[chunk] = ibv_reg_mr(rdma->pd, chunk_start, len, (rkey ? (IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE) : 0)); if (!block->pmr[chunk]) { perror("Failed to register chunk!"); fprintf(stderr, "Chunk details: block: %d chunk index %d" " start %" PRIu64 " end %" PRIu64 " host %" PRIu64 " local %" PRIu64 " registrations: %d\n", block->index, chunk, (uint64_t) chunk_start, (uint64_t) chunk_end, (uint64_t) host_addr, (uint64_t) block->local_host_addr, rdma->total_registrations); return -1; } rdma->total_registrations++; } if (lkey) { *lkey = block->pmr[chunk]->lkey; } if (rkey) { *rkey = block->pmr[chunk]->rkey; } return 0; } /* * Register (at connection time) the memory used for control * channel messages. */ static int qemu_rdma_reg_control(RDMAContext *rdma, int idx) { rdma->wr_data[idx].control_mr = ibv_reg_mr(rdma->pd, rdma->wr_data[idx].control, RDMA_CONTROL_MAX_BUFFER, IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE); if (rdma->wr_data[idx].control_mr) { rdma->total_registrations++; return 0; } fprintf(stderr, "qemu_rdma_reg_control failed!\n"); return -1; } const char *print_wrid(int wrid) { if (wrid >= RDMA_WRID_RECV_CONTROL) { return wrid_desc[RDMA_WRID_RECV_CONTROL]; } return wrid_desc[wrid]; } /* * RDMA requires memory registration (mlock/pinning), but this is not good for * overcommitment. * * In preparation for the future where LRU information or workload-specific * writable writable working set memory access behavior is available to QEMU * it would be nice to have in place the ability to UN-register/UN-pin * particular memory regions from the RDMA hardware when it is determine that * those regions of memory will likely not be accessed again in the near future. * * While we do not yet have such information right now, the following * compile-time option allows us to perform a non-optimized version of this * behavior. * * By uncommenting this option, you will cause *all* RDMA transfers to be * unregistered immediately after the transfer completes on both sides of the * connection. This has no effect in 'rdma-pin-all' mode, only regular mode. * * This will have a terrible impact on migration performance, so until future * workload information or LRU information is available, do not attempt to use * this feature except for basic testing. */ //#define RDMA_UNREGISTRATION_EXAMPLE /* * Perform a non-optimized memory unregistration after every transfer * for demonsration purposes, only if pin-all is not requested. * * Potential optimizations: * 1. Start a new thread to run this function continuously - for bit clearing - and for receipt of unregister messages * 2. Use an LRU. * 3. Use workload hints. */ static int qemu_rdma_unregister_waiting(RDMAContext *rdma) { while (rdma->unregistrations[rdma->unregister_current]) { int ret; uint64_t wr_id = rdma->unregistrations[rdma->unregister_current]; uint64_t chunk = (wr_id & RDMA_WRID_CHUNK_MASK) >> RDMA_WRID_CHUNK_SHIFT; uint64_t index = (wr_id & RDMA_WRID_BLOCK_MASK) >> RDMA_WRID_BLOCK_SHIFT; RDMALocalBlock *block = &(rdma->local_ram_blocks.block[index]); RDMARegister reg = { .current_index = index }; RDMAControlHeader resp = { .type = RDMA_CONTROL_UNREGISTER_FINISHED, }; RDMAControlHeader head = { .len = sizeof(RDMARegister), .type = RDMA_CONTROL_UNREGISTER_REQUEST, .repeat = 1, }; DDPRINTF("Processing unregister for chunk: %" PRIu64 " at position %d\n", chunk, rdma->unregister_current); rdma->unregistrations[rdma->unregister_current] = 0; rdma->unregister_current++; if (rdma->unregister_current == RDMA_SIGNALED_SEND_MAX) { rdma->unregister_current = 0; } /* * Unregistration is speculative (because migration is single-threaded * and we cannot break the protocol's inifinband message ordering). * Thus, if the memory is currently being used for transmission, * then abort the attempt to unregister and try again * later the next time a completion is received for this memory. */ clear_bit(chunk, block->unregister_bitmap); if (test_bit(chunk, block->transit_bitmap)) { DDPRINTF("Cannot unregister inflight chunk: %" PRIu64 "\n", chunk); continue; } DDPRINTF("Sending unregister for chunk: %" PRIu64 "\n", chunk); ret = ibv_dereg_mr(block->pmr[chunk]); block->pmr[chunk] = NULL; block->remote_keys[chunk] = 0; if (ret != 0) { perror("unregistration chunk failed"); return -ret; } rdma->total_registrations--; reg.key.chunk = chunk; register_to_network(®); ret = qemu_rdma_exchange_send(rdma, &head, (uint8_t *) ®, &resp, NULL, NULL); if (ret < 0) { return ret; } DDPRINTF("Unregister for chunk: %" PRIu64 " complete.\n", chunk); } return 0; } static uint64_t qemu_rdma_make_wrid(uint64_t wr_id, uint64_t index, uint64_t chunk) { uint64_t result = wr_id & RDMA_WRID_TYPE_MASK; result |= (index << RDMA_WRID_BLOCK_SHIFT); result |= (chunk << RDMA_WRID_CHUNK_SHIFT); return result; } /* * Set bit for unregistration in the next iteration. * We cannot transmit right here, but will unpin later. */ static void qemu_rdma_signal_unregister(RDMAContext *rdma, uint64_t index, uint64_t chunk, uint64_t wr_id) { if (rdma->unregistrations[rdma->unregister_next] != 0) { fprintf(stderr, "rdma migration: queue is full!\n"); } else { RDMALocalBlock *block = &(rdma->local_ram_blocks.block[index]); if (!test_and_set_bit(chunk, block->unregister_bitmap)) { DDPRINTF("Appending unregister chunk %" PRIu64 " at position %d\n", chunk, rdma->unregister_next); rdma->unregistrations[rdma->unregister_next++] = qemu_rdma_make_wrid(wr_id, index, chunk); if (rdma->unregister_next == RDMA_SIGNALED_SEND_MAX) { rdma->unregister_next = 0; } } else { DDPRINTF("Unregister chunk %" PRIu64 " already in queue.\n", chunk); } } } /* * Consult the connection manager to see a work request * (of any kind) has completed. * Return the work request ID that completed. */ static uint64_t qemu_rdma_poll(RDMAContext *rdma, uint64_t *wr_id_out, uint32_t *byte_len) { int ret; struct ibv_wc wc; uint64_t wr_id; ret = ibv_poll_cq(rdma->cq, 1, &wc); if (!ret) { *wr_id_out = RDMA_WRID_NONE; return 0; } if (ret < 0) { fprintf(stderr, "ibv_poll_cq return %d!\n", ret); return ret; } wr_id = wc.wr_id & RDMA_WRID_TYPE_MASK; if (wc.status != IBV_WC_SUCCESS) { fprintf(stderr, "ibv_poll_cq wc.status=%d %s!\n", wc.status, ibv_wc_status_str(wc.status)); fprintf(stderr, "ibv_poll_cq wrid=%s!\n", wrid_desc[wr_id]); return -1; } if (rdma->control_ready_expected && (wr_id >= RDMA_WRID_RECV_CONTROL)) { DDDPRINTF("completion %s #%" PRId64 " received (%" PRId64 ")" " left %d\n", wrid_desc[RDMA_WRID_RECV_CONTROL], wr_id - RDMA_WRID_RECV_CONTROL, wr_id, rdma->nb_sent); rdma->control_ready_expected = 0; } if (wr_id == RDMA_WRID_RDMA_WRITE) { uint64_t chunk = (wc.wr_id & RDMA_WRID_CHUNK_MASK) >> RDMA_WRID_CHUNK_SHIFT; uint64_t index = (wc.wr_id & RDMA_WRID_BLOCK_MASK) >> RDMA_WRID_BLOCK_SHIFT; RDMALocalBlock *block = &(rdma->local_ram_blocks.block[index]); DDDPRINTF("completions %s (%" PRId64 ") left %d, " "block %" PRIu64 ", chunk: %" PRIu64 " %p %p\n", print_wrid(wr_id), wr_id, rdma->nb_sent, index, chunk, block->local_host_addr, (void *)block->remote_host_addr); clear_bit(chunk, block->transit_bitmap); if (rdma->nb_sent > 0) { rdma->nb_sent--; } if (!rdma->pin_all) { /* * FYI: If one wanted to signal a specific chunk to be unregistered * using LRU or workload-specific information, this is the function * you would call to do so. That chunk would then get asynchronously * unregistered later. */ #ifdef RDMA_UNREGISTRATION_EXAMPLE qemu_rdma_signal_unregister(rdma, index, chunk, wc.wr_id); #endif } } else { DDDPRINTF("other completion %s (%" PRId64 ") received left %d\n", print_wrid(wr_id), wr_id, rdma->nb_sent); } *wr_id_out = wc.wr_id; if (byte_len) { *byte_len = wc.byte_len; } return 0; } /* * Block until the next work request has completed. * * First poll to see if a work request has already completed, * otherwise block. * * If we encounter completed work requests for IDs other than * the one we're interested in, then that's generally an error. * * The only exception is actual RDMA Write completions. These * completions only need to be recorded, but do not actually * need further processing. */ static int qemu_rdma_block_for_wrid(RDMAContext *rdma, int wrid_requested, uint32_t *byte_len) { int num_cq_events = 0, ret = 0; struct ibv_cq *cq; void *cq_ctx; uint64_t wr_id = RDMA_WRID_NONE, wr_id_in; if (ibv_req_notify_cq(rdma->cq, 0)) { return -1; } /* poll cq first */ while (wr_id != wrid_requested) { ret = qemu_rdma_poll(rdma, &wr_id_in, byte_len); if (ret < 0) { return ret; } wr_id = wr_id_in & RDMA_WRID_TYPE_MASK; if (wr_id == RDMA_WRID_NONE) { break; } if (wr_id != wrid_requested) { DDDPRINTF("A Wanted wrid %s (%d) but got %s (%" PRIu64 ")\n", print_wrid(wrid_requested), wrid_requested, print_wrid(wr_id), wr_id); } } if (wr_id == wrid_requested) { return 0; } while (1) { /* * Coroutine doesn't start until process_incoming_migration() * so don't yield unless we know we're running inside of a coroutine. */ if (rdma->migration_started_on_destination) { yield_until_fd_readable(rdma->comp_channel->fd); } if (ibv_get_cq_event(rdma->comp_channel, &cq, &cq_ctx)) { perror("ibv_get_cq_event"); goto err_block_for_wrid; } num_cq_events++; if (ibv_req_notify_cq(cq, 0)) { goto err_block_for_wrid; } while (wr_id != wrid_requested) { ret = qemu_rdma_poll(rdma, &wr_id_in, byte_len); if (ret < 0) { goto err_block_for_wrid; } wr_id = wr_id_in & RDMA_WRID_TYPE_MASK; if (wr_id == RDMA_WRID_NONE) { break; } if (wr_id != wrid_requested) { DDDPRINTF("B Wanted wrid %s (%d) but got %s (%" PRIu64 ")\n", print_wrid(wrid_requested), wrid_requested, print_wrid(wr_id), wr_id); } } if (wr_id == wrid_requested) { goto success_block_for_wrid; } } success_block_for_wrid: if (num_cq_events) { ibv_ack_cq_events(cq, num_cq_events); } return 0; err_block_for_wrid: if (num_cq_events) { ibv_ack_cq_events(cq, num_cq_events); } return ret; } /* * Post a SEND message work request for the control channel * containing some data and block until the post completes. */ static int qemu_rdma_post_send_control(RDMAContext *rdma, uint8_t *buf, RDMAControlHeader *head) { int ret = 0; RDMAWorkRequestData *wr = &rdma->wr_data[RDMA_WRID_CONTROL]; struct ibv_send_wr *bad_wr; struct ibv_sge sge = { .addr = (uint64_t)(wr->control), .length = head->len + sizeof(RDMAControlHeader), .lkey = wr->control_mr->lkey, }; struct ibv_send_wr send_wr = { .wr_id = RDMA_WRID_SEND_CONTROL, .opcode = IBV_WR_SEND, .send_flags = IBV_SEND_SIGNALED, .sg_list = &sge, .num_sge = 1, }; DDDPRINTF("CONTROL: sending %s..\n", control_desc[head->type]); /* * We don't actually need to do a memcpy() in here if we used * the "sge" properly, but since we're only sending control messages * (not RAM in a performance-critical path), then its OK for now. * * The copy makes the RDMAControlHeader simpler to manipulate * for the time being. */ assert(head->len <= RDMA_CONTROL_MAX_BUFFER - sizeof(*head)); memcpy(wr->control, head, sizeof(RDMAControlHeader)); control_to_network((void *) wr->control); if (buf) { memcpy(wr->control + sizeof(RDMAControlHeader), buf, head->len); } if (ibv_post_send(rdma->qp, &send_wr, &bad_wr)) { return -1; } if (ret < 0) { fprintf(stderr, "Failed to use post IB SEND for control!\n"); return ret; } ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_SEND_CONTROL, NULL); if (ret < 0) { fprintf(stderr, "rdma migration: send polling control error!\n"); } return ret; } /* * Post a RECV work request in anticipation of some future receipt * of data on the control channel. */ static int qemu_rdma_post_recv_control(RDMAContext *rdma, int idx) { struct ibv_recv_wr *bad_wr; struct ibv_sge sge = { .addr = (uint64_t)(rdma->wr_data[idx].control), .length = RDMA_CONTROL_MAX_BUFFER, .lkey = rdma->wr_data[idx].control_mr->lkey, }; struct ibv_recv_wr recv_wr = { .wr_id = RDMA_WRID_RECV_CONTROL + idx, .sg_list = &sge, .num_sge = 1, }; if (ibv_post_recv(rdma->qp, &recv_wr, &bad_wr)) { return -1; } return 0; } /* * Block and wait for a RECV control channel message to arrive. */ static int qemu_rdma_exchange_get_response(RDMAContext *rdma, RDMAControlHeader *head, int expecting, int idx) { uint32_t byte_len; int ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RECV_CONTROL + idx, &byte_len); if (ret < 0) { fprintf(stderr, "rdma migration: recv polling control error!\n"); return ret; } network_to_control((void *) rdma->wr_data[idx].control); memcpy(head, rdma->wr_data[idx].control, sizeof(RDMAControlHeader)); DDDPRINTF("CONTROL: %s receiving...\n", control_desc[expecting]); if (expecting == RDMA_CONTROL_NONE) { DDDPRINTF("Surprise: got %s (%d)\n", control_desc[head->type], head->type); } else if (head->type != expecting || head->type == RDMA_CONTROL_ERROR) { fprintf(stderr, "Was expecting a %s (%d) control message" ", but got: %s (%d), length: %d\n", control_desc[expecting], expecting, control_desc[head->type], head->type, head->len); return -EIO; } if (head->len > RDMA_CONTROL_MAX_BUFFER - sizeof(*head)) { fprintf(stderr, "too long length: %d\n", head->len); return -EINVAL; } if (sizeof(*head) + head->len != byte_len) { fprintf(stderr, "Malformed length: %d byte_len %d\n", head->len, byte_len); return -EINVAL; } return 0; } /* * When a RECV work request has completed, the work request's * buffer is pointed at the header. * * This will advance the pointer to the data portion * of the control message of the work request's buffer that * was populated after the work request finished. */ static void qemu_rdma_move_header(RDMAContext *rdma, int idx, RDMAControlHeader *head) { rdma->wr_data[idx].control_len = head->len; rdma->wr_data[idx].control_curr = rdma->wr_data[idx].control + sizeof(RDMAControlHeader); } /* * This is an 'atomic' high-level operation to deliver a single, unified * control-channel message. * * Additionally, if the user is expecting some kind of reply to this message, * they can request a 'resp' response message be filled in by posting an * additional work request on behalf of the user and waiting for an additional * completion. * * The extra (optional) response is used during registration to us from having * to perform an *additional* exchange of message just to provide a response by * instead piggy-backing on the acknowledgement. */ static int qemu_rdma_exchange_send(RDMAContext *rdma, RDMAControlHeader *head, uint8_t *data, RDMAControlHeader *resp, int *resp_idx, int (*callback)(RDMAContext *rdma)) { int ret = 0; /* * Wait until the dest is ready before attempting to deliver the message * by waiting for a READY message. */ if (rdma->control_ready_expected) { RDMAControlHeader resp; ret = qemu_rdma_exchange_get_response(rdma, &resp, RDMA_CONTROL_READY, RDMA_WRID_READY); if (ret < 0) { return ret; } } /* * If the user is expecting a response, post a WR in anticipation of it. */ if (resp) { ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_DATA); if (ret) { fprintf(stderr, "rdma migration: error posting" " extra control recv for anticipated result!"); return ret; } } /* * Post a WR to replace the one we just consumed for the READY message. */ ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY); if (ret) { fprintf(stderr, "rdma migration: error posting first control recv!"); return ret; } /* * Deliver the control message that was requested. */ ret = qemu_rdma_post_send_control(rdma, data, head); if (ret < 0) { fprintf(stderr, "Failed to send control buffer!\n"); return ret; } /* * If we're expecting a response, block and wait for it. */ if (resp) { if (callback) { DDPRINTF("Issuing callback before receiving response...\n"); ret = callback(rdma); if (ret < 0) { return ret; } } DDPRINTF("Waiting for response %s\n", control_desc[resp->type]); ret = qemu_rdma_exchange_get_response(rdma, resp, resp->type, RDMA_WRID_DATA); if (ret < 0) { return ret; } qemu_rdma_move_header(rdma, RDMA_WRID_DATA, resp); if (resp_idx) { *resp_idx = RDMA_WRID_DATA; } DDPRINTF("Response %s received.\n", control_desc[resp->type]); } rdma->control_ready_expected = 1; return 0; } /* * This is an 'atomic' high-level operation to receive a single, unified * control-channel message. */ static int qemu_rdma_exchange_recv(RDMAContext *rdma, RDMAControlHeader *head, int expecting) { RDMAControlHeader ready = { .len = 0, .type = RDMA_CONTROL_READY, .repeat = 1, }; int ret; /* * Inform the source that we're ready to receive a message. */ ret = qemu_rdma_post_send_control(rdma, NULL, &ready); if (ret < 0) { fprintf(stderr, "Failed to send control buffer!\n"); return ret; } /* * Block and wait for the message. */ ret = qemu_rdma_exchange_get_response(rdma, head, expecting, RDMA_WRID_READY); if (ret < 0) { return ret; } qemu_rdma_move_header(rdma, RDMA_WRID_READY, head); /* * Post a new RECV work request to replace the one we just consumed. */ ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY); if (ret) { fprintf(stderr, "rdma migration: error posting second control recv!"); return ret; } return 0; } /* * Write an actual chunk of memory using RDMA. * * If we're using dynamic registration on the dest-side, we have to * send a registration command first. */ static int qemu_rdma_write_one(QEMUFile *f, RDMAContext *rdma, int current_index, uint64_t current_addr, uint64_t length) { struct ibv_sge sge; struct ibv_send_wr send_wr = { 0 }; struct ibv_send_wr *bad_wr; int reg_result_idx, ret, count = 0; uint64_t chunk, chunks; uint8_t *chunk_start, *chunk_end; RDMALocalBlock *block = &(rdma->local_ram_blocks.block[current_index]); RDMARegister reg; RDMARegisterResult *reg_result; RDMAControlHeader resp = { .type = RDMA_CONTROL_REGISTER_RESULT }; RDMAControlHeader head = { .len = sizeof(RDMARegister), .type = RDMA_CONTROL_REGISTER_REQUEST, .repeat = 1, }; retry: sge.addr = (uint64_t)(block->local_host_addr + (current_addr - block->offset)); sge.length = length; chunk = ram_chunk_index(block->local_host_addr, (uint8_t *) sge.addr); chunk_start = ram_chunk_start(block, chunk); if (block->is_ram_block) { chunks = length / (1UL << RDMA_REG_CHUNK_SHIFT); if (chunks && ((length % (1UL << RDMA_REG_CHUNK_SHIFT)) == 0)) { chunks--; } } else { chunks = block->length / (1UL << RDMA_REG_CHUNK_SHIFT); if (chunks && ((block->length % (1UL << RDMA_REG_CHUNK_SHIFT)) == 0)) { chunks--; } } DDPRINTF("Writing %" PRIu64 " chunks, (%" PRIu64 " MB)\n", chunks + 1, (chunks + 1) * (1UL << RDMA_REG_CHUNK_SHIFT) / 1024 / 1024); chunk_end = ram_chunk_end(block, chunk + chunks); if (!rdma->pin_all) { #ifdef RDMA_UNREGISTRATION_EXAMPLE qemu_rdma_unregister_waiting(rdma); #endif } while (test_bit(chunk, block->transit_bitmap)) { (void)count; DDPRINTF("(%d) Not clobbering: block: %d chunk %" PRIu64 " current %" PRIu64 " len %" PRIu64 " %d %d\n", count++, current_index, chunk, sge.addr, length, rdma->nb_sent, block->nb_chunks); ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RDMA_WRITE, NULL); if (ret < 0) { fprintf(stderr, "Failed to Wait for previous write to complete " "block %d chunk %" PRIu64 " current %" PRIu64 " len %" PRIu64 " %d\n", current_index, chunk, sge.addr, length, rdma->nb_sent); return ret; } } if (!rdma->pin_all || !block->is_ram_block) { if (!block->remote_keys[chunk]) { /* * This chunk has not yet been registered, so first check to see * if the entire chunk is zero. If so, tell the other size to * memset() + madvise() the entire chunk without RDMA. */ if (can_use_buffer_find_nonzero_offset((void *)sge.addr, length) && buffer_find_nonzero_offset((void *)sge.addr, length) == length) { RDMACompress comp = { .offset = current_addr, .value = 0, .block_idx = current_index, .length = length, }; head.len = sizeof(comp); head.type = RDMA_CONTROL_COMPRESS; DDPRINTF("Entire chunk is zero, sending compress: %" PRIu64 " for %d " "bytes, index: %d, offset: %" PRId64 "...\n", chunk, sge.length, current_index, current_addr); compress_to_network(&comp); ret = qemu_rdma_exchange_send(rdma, &head, (uint8_t *) &comp, NULL, NULL, NULL); if (ret < 0) { return -EIO; } acct_update_position(f, sge.length, true); return 1; } /* * Otherwise, tell other side to register. */ reg.current_index = current_index; if (block->is_ram_block) { reg.key.current_addr = current_addr; } else { reg.key.chunk = chunk; } reg.chunks = chunks; DDPRINTF("Sending registration request chunk %" PRIu64 " for %d " "bytes, index: %d, offset: %" PRId64 "...\n", chunk, sge.length, current_index, current_addr); register_to_network(®); ret = qemu_rdma_exchange_send(rdma, &head, (uint8_t *) ®, &resp, ®_result_idx, NULL); if (ret < 0) { return ret; } /* try to overlap this single registration with the one we sent. */ if (qemu_rdma_register_and_get_keys(rdma, block, (uint8_t *) sge.addr, &sge.lkey, NULL, chunk, chunk_start, chunk_end)) { fprintf(stderr, "cannot get lkey!\n"); return -EINVAL; } reg_result = (RDMARegisterResult *) rdma->wr_data[reg_result_idx].control_curr; network_to_result(reg_result); DDPRINTF("Received registration result:" " my key: %x their key %x, chunk %" PRIu64 "\n", block->remote_keys[chunk], reg_result->rkey, chunk); block->remote_keys[chunk] = reg_result->rkey; block->remote_host_addr = reg_result->host_addr; } else { /* already registered before */ if (qemu_rdma_register_and_get_keys(rdma, block, (uint8_t *)sge.addr, &sge.lkey, NULL, chunk, chunk_start, chunk_end)) { fprintf(stderr, "cannot get lkey!\n"); return -EINVAL; } } send_wr.wr.rdma.rkey = block->remote_keys[chunk]; } else { send_wr.wr.rdma.rkey = block->remote_rkey; if (qemu_rdma_register_and_get_keys(rdma, block, (uint8_t *)sge.addr, &sge.lkey, NULL, chunk, chunk_start, chunk_end)) { fprintf(stderr, "cannot get lkey!\n"); return -EINVAL; } } /* * Encode the ram block index and chunk within this wrid. * We will use this information at the time of completion * to figure out which bitmap to check against and then which * chunk in the bitmap to look for. */ send_wr.wr_id = qemu_rdma_make_wrid(RDMA_WRID_RDMA_WRITE, current_index, chunk); send_wr.opcode = IBV_WR_RDMA_WRITE; send_wr.send_flags = IBV_SEND_SIGNALED; send_wr.sg_list = &sge; send_wr.num_sge = 1; send_wr.wr.rdma.remote_addr = block->remote_host_addr + (current_addr - block->offset); DDDPRINTF("Posting chunk: %" PRIu64 ", addr: %lx" " remote: %lx, bytes %" PRIu32 "\n", chunk, sge.addr, send_wr.wr.rdma.remote_addr, sge.length); /* * ibv_post_send() does not return negative error numbers, * per the specification they are positive - no idea why. */ ret = ibv_post_send(rdma->qp, &send_wr, &bad_wr); if (ret == ENOMEM) { DDPRINTF("send queue is full. wait a little....\n"); ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RDMA_WRITE, NULL); if (ret < 0) { fprintf(stderr, "rdma migration: failed to make " "room in full send queue! %d\n", ret); return ret; } goto retry; } else if (ret > 0) { perror("rdma migration: post rdma write failed"); return -ret; } set_bit(chunk, block->transit_bitmap); acct_update_position(f, sge.length, false); rdma->total_writes++; return 0; } /* * Push out any unwritten RDMA operations. * * We support sending out multiple chunks at the same time. * Not all of them need to get signaled in the completion queue. */ static int qemu_rdma_write_flush(QEMUFile *f, RDMAContext *rdma) { int ret; if (!rdma->current_length) { return 0; } ret = qemu_rdma_write_one(f, rdma, rdma->current_index, rdma->current_addr, rdma->current_length); if (ret < 0) { return ret; } if (ret == 0) { rdma->nb_sent++; DDDPRINTF("sent total: %d\n", rdma->nb_sent); } rdma->current_length = 0; rdma->current_addr = 0; return 0; } static inline int qemu_rdma_buffer_mergable(RDMAContext *rdma, uint64_t offset, uint64_t len) { RDMALocalBlock *block; uint8_t *host_addr; uint8_t *chunk_end; if (rdma->current_index < 0) { return 0; } if (rdma->current_chunk < 0) { return 0; } block = &(rdma->local_ram_blocks.block[rdma->current_index]); host_addr = block->local_host_addr + (offset - block->offset); chunk_end = ram_chunk_end(block, rdma->current_chunk); if (rdma->current_length == 0) { return 0; } /* * Only merge into chunk sequentially. */ if (offset != (rdma->current_addr + rdma->current_length)) { return 0; } if (offset < block->offset) { return 0; } if ((offset + len) > (block->offset + block->length)) { return 0; } if ((host_addr + len) > chunk_end) { return 0; } return 1; } /* * We're not actually writing here, but doing three things: * * 1. Identify the chunk the buffer belongs to. * 2. If the chunk is full or the buffer doesn't belong to the current * chunk, then start a new chunk and flush() the old chunk. * 3. To keep the hardware busy, we also group chunks into batches * and only require that a batch gets acknowledged in the completion * qeueue instead of each individual chunk. */ static int qemu_rdma_write(QEMUFile *f, RDMAContext *rdma, uint64_t block_offset, uint64_t offset, uint64_t len) { uint64_t current_addr = block_offset + offset; uint64_t index = rdma->current_index; uint64_t chunk = rdma->current_chunk; int ret; /* If we cannot merge it, we flush the current buffer first. */ if (!qemu_rdma_buffer_mergable(rdma, current_addr, len)) { ret = qemu_rdma_write_flush(f, rdma); if (ret) { return ret; } rdma->current_length = 0; rdma->current_addr = current_addr; ret = qemu_rdma_search_ram_block(rdma, block_offset, offset, len, &index, &chunk); if (ret) { fprintf(stderr, "ram block search failed\n"); return ret; } rdma->current_index = index; rdma->current_chunk = chunk; } /* merge it */ rdma->current_length += len; /* flush it if buffer is too large */ if (rdma->current_length >= RDMA_MERGE_MAX) { return qemu_rdma_write_flush(f, rdma); } return 0; } static void qemu_rdma_cleanup(RDMAContext *rdma) { struct rdma_cm_event *cm_event; int ret, idx; if (rdma->cm_id && rdma->connected) { if (rdma->error_state) { RDMAControlHeader head = { .len = 0, .type = RDMA_CONTROL_ERROR, .repeat = 1, }; fprintf(stderr, "Early error. Sending error.\n"); qemu_rdma_post_send_control(rdma, NULL, &head); } ret = rdma_disconnect(rdma->cm_id); if (!ret) { DDPRINTF("waiting for disconnect\n"); ret = rdma_get_cm_event(rdma->channel, &cm_event); if (!ret) { rdma_ack_cm_event(cm_event); } } DDPRINTF("Disconnected.\n"); rdma->connected = false; } g_free(rdma->block); rdma->block = NULL; for (idx = 0; idx < RDMA_WRID_MAX; idx++) { if (rdma->wr_data[idx].control_mr) { rdma->total_registrations--; ibv_dereg_mr(rdma->wr_data[idx].control_mr); } rdma->wr_data[idx].control_mr = NULL; } if (rdma->local_ram_blocks.block) { while (rdma->local_ram_blocks.nb_blocks) { __qemu_rdma_delete_block(rdma, rdma->local_ram_blocks.block->offset); } } if (rdma->qp) { rdma_destroy_qp(rdma->cm_id); rdma->qp = NULL; } if (rdma->cq) { ibv_destroy_cq(rdma->cq); rdma->cq = NULL; } if (rdma->comp_channel) { ibv_destroy_comp_channel(rdma->comp_channel); rdma->comp_channel = NULL; } if (rdma->pd) { ibv_dealloc_pd(rdma->pd); rdma->pd = NULL; } if (rdma->listen_id) { rdma_destroy_id(rdma->listen_id); rdma->listen_id = NULL; } if (rdma->cm_id) { rdma_destroy_id(rdma->cm_id); rdma->cm_id = NULL; } if (rdma->channel) { rdma_destroy_event_channel(rdma->channel); rdma->channel = NULL; } g_free(rdma->host); rdma->host = NULL; } static int qemu_rdma_source_init(RDMAContext *rdma, Error **errp, bool pin_all) { int ret, idx; Error *local_err = NULL, **temp = &local_err; /* * Will be validated against destination's actual capabilities * after the connect() completes. */ rdma->pin_all = pin_all; ret = qemu_rdma_resolve_host(rdma, temp); if (ret) { goto err_rdma_source_init; } ret = qemu_rdma_alloc_pd_cq(rdma); if (ret) { ERROR(temp, "rdma migration: error allocating pd and cq! Your mlock()" " limits may be too low. Please check $ ulimit -a # and " "search for 'ulimit -l' in the output"); goto err_rdma_source_init; } ret = qemu_rdma_alloc_qp(rdma); if (ret) { ERROR(temp, "rdma migration: error allocating qp!"); goto err_rdma_source_init; } ret = qemu_rdma_init_ram_blocks(rdma); if (ret) { ERROR(temp, "rdma migration: error initializing ram blocks!"); goto err_rdma_source_init; } for (idx = 0; idx < RDMA_WRID_MAX; idx++) { ret = qemu_rdma_reg_control(rdma, idx); if (ret) { ERROR(temp, "rdma migration: error registering %d control!", idx); goto err_rdma_source_init; } } return 0; err_rdma_source_init: error_propagate(errp, local_err); qemu_rdma_cleanup(rdma); return -1; } static int qemu_rdma_connect(RDMAContext *rdma, Error **errp) { RDMACapabilities cap = { .version = RDMA_CONTROL_VERSION_CURRENT, .flags = 0, }; struct rdma_conn_param conn_param = { .initiator_depth = 2, .retry_count = 5, .private_data = &cap, .private_data_len = sizeof(cap), }; struct rdma_cm_event *cm_event; int ret; /* * Only negotiate the capability with destination if the user * on the source first requested the capability. */ if (rdma->pin_all) { DPRINTF("Server pin-all memory requested.\n"); cap.flags |= RDMA_CAPABILITY_PIN_ALL; } caps_to_network(&cap); ret = rdma_connect(rdma->cm_id, &conn_param); if (ret) { perror("rdma_connect"); ERROR(errp, "connecting to destination!"); rdma_destroy_id(rdma->cm_id); rdma->cm_id = NULL; goto err_rdma_source_connect; } ret = rdma_get_cm_event(rdma->channel, &cm_event); if (ret) { perror("rdma_get_cm_event after rdma_connect"); ERROR(errp, "connecting to destination!"); rdma_ack_cm_event(cm_event); rdma_destroy_id(rdma->cm_id); rdma->cm_id = NULL; goto err_rdma_source_connect; } if (cm_event->event != RDMA_CM_EVENT_ESTABLISHED) { perror("rdma_get_cm_event != EVENT_ESTABLISHED after rdma_connect"); ERROR(errp, "connecting to destination!"); rdma_ack_cm_event(cm_event); rdma_destroy_id(rdma->cm_id); rdma->cm_id = NULL; goto err_rdma_source_connect; } rdma->connected = true; memcpy(&cap, cm_event->param.conn.private_data, sizeof(cap)); network_to_caps(&cap); /* * Verify that the *requested* capabilities are supported by the destination * and disable them otherwise. */ if (rdma->pin_all && !(cap.flags & RDMA_CAPABILITY_PIN_ALL)) { ERROR(errp, "Server cannot support pinning all memory. " "Will register memory dynamically."); rdma->pin_all = false; } DPRINTF("Pin all memory: %s\n", rdma->pin_all ? "enabled" : "disabled"); rdma_ack_cm_event(cm_event); ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY); if (ret) { ERROR(errp, "posting second control recv!"); goto err_rdma_source_connect; } rdma->control_ready_expected = 1; rdma->nb_sent = 0; return 0; err_rdma_source_connect: qemu_rdma_cleanup(rdma); return -1; } static int qemu_rdma_dest_init(RDMAContext *rdma, Error **errp) { int ret = -EINVAL, idx; struct rdma_cm_id *listen_id; char ip[40] = "unknown"; struct rdma_addrinfo *res; char port_str[16]; for (idx = 0; idx < RDMA_WRID_MAX; idx++) { rdma->wr_data[idx].control_len = 0; rdma->wr_data[idx].control_curr = NULL; } if (rdma->host == NULL) { ERROR(errp, "RDMA host is not set!"); rdma->error_state = -EINVAL; return -1; } /* create CM channel */ rdma->channel = rdma_create_event_channel(); if (!rdma->channel) { ERROR(errp, "could not create rdma event channel"); rdma->error_state = -EINVAL; return -1; } /* create CM id */ ret = rdma_create_id(rdma->channel, &listen_id, NULL, RDMA_PS_TCP); if (ret) { ERROR(errp, "could not create cm_id!"); goto err_dest_init_create_listen_id; } snprintf(port_str, 16, "%d", rdma->port); port_str[15] = '\0'; if (rdma->host && strcmp("", rdma->host)) { struct rdma_addrinfo *e; ret = rdma_getaddrinfo(rdma->host, port_str, NULL, &res); if (ret < 0) { ERROR(errp, "could not rdma_getaddrinfo address %s", rdma->host); goto err_dest_init_bind_addr; } for (e = res; e != NULL; e = e->ai_next) { inet_ntop(e->ai_family, &((struct sockaddr_in *) e->ai_dst_addr)->sin_addr, ip, sizeof ip); DPRINTF("Trying %s => %s\n", rdma->host, ip); ret = rdma_bind_addr(listen_id, e->ai_dst_addr); if (!ret) { if (e->ai_family == AF_INET6) { ret = qemu_rdma_broken_ipv6_kernel(errp, listen_id->verbs); if (ret) { continue; } } goto listen; } } ERROR(errp, "Error: could not rdma_bind_addr!"); goto err_dest_init_bind_addr; } else { ERROR(errp, "migration host and port not specified!"); ret = -EINVAL; goto err_dest_init_bind_addr; } listen: rdma->listen_id = listen_id; qemu_rdma_dump_gid("dest_init", listen_id); return 0; err_dest_init_bind_addr: rdma_destroy_id(listen_id); err_dest_init_create_listen_id: rdma_destroy_event_channel(rdma->channel); rdma->channel = NULL; rdma->error_state = ret; return ret; } static void *qemu_rdma_data_init(const char *host_port, Error **errp) { RDMAContext *rdma = NULL; InetSocketAddress *addr; if (host_port) { rdma = g_malloc0(sizeof(RDMAContext)); memset(rdma, 0, sizeof(RDMAContext)); rdma->current_index = -1; rdma->current_chunk = -1; addr = inet_parse(host_port, NULL); if (addr != NULL) { rdma->port = atoi(addr->port); rdma->host = g_strdup(addr->host); } else { ERROR(errp, "bad RDMA migration address '%s'", host_port); g_free(rdma); return NULL; } } return rdma; } /* * QEMUFile interface to the control channel. * SEND messages for control only. * pc.ram is handled with regular RDMA messages. */ static int qemu_rdma_put_buffer(void *opaque, const uint8_t *buf, int64_t pos, int size) { QEMUFileRDMA *r = opaque; QEMUFile *f = r->file; RDMAContext *rdma = r->rdma; size_t remaining = size; uint8_t * data = (void *) buf; int ret; CHECK_ERROR_STATE(); /* * Push out any writes that * we're queued up for pc.ram. */ ret = qemu_rdma_write_flush(f, rdma); if (ret < 0) { rdma->error_state = ret; return ret; } while (remaining) { RDMAControlHeader head; r->len = MIN(remaining, RDMA_SEND_INCREMENT); remaining -= r->len; head.len = r->len; head.type = RDMA_CONTROL_QEMU_FILE; ret = qemu_rdma_exchange_send(rdma, &head, data, NULL, NULL, NULL); if (ret < 0) { rdma->error_state = ret; return ret; } data += r->len; } return size; } static size_t qemu_rdma_fill(RDMAContext *rdma, uint8_t *buf, int size, int idx) { size_t len = 0; if (rdma->wr_data[idx].control_len) { DDDPRINTF("RDMA %" PRId64 " of %d bytes already in buffer\n", rdma->wr_data[idx].control_len, size); len = MIN(size, rdma->wr_data[idx].control_len); memcpy(buf, rdma->wr_data[idx].control_curr, len); rdma->wr_data[idx].control_curr += len; rdma->wr_data[idx].control_len -= len; } return len; } /* * QEMUFile interface to the control channel. * RDMA links don't use bytestreams, so we have to * return bytes to QEMUFile opportunistically. */ static int qemu_rdma_get_buffer(void *opaque, uint8_t *buf, int64_t pos, int size) { QEMUFileRDMA *r = opaque; RDMAContext *rdma = r->rdma; RDMAControlHeader head; int ret = 0; CHECK_ERROR_STATE(); /* * First, we hold on to the last SEND message we * were given and dish out the bytes until we run * out of bytes. */ r->len = qemu_rdma_fill(r->rdma, buf, size, 0); if (r->len) { return r->len; } /* * Once we run out, we block and wait for another * SEND message to arrive. */ ret = qemu_rdma_exchange_recv(rdma, &head, RDMA_CONTROL_QEMU_FILE); if (ret < 0) { rdma->error_state = ret; return ret; } /* * SEND was received with new bytes, now try again. */ return qemu_rdma_fill(r->rdma, buf, size, 0); } /* * Block until all the outstanding chunks have been delivered by the hardware. */ static int qemu_rdma_drain_cq(QEMUFile *f, RDMAContext *rdma) { int ret; if (qemu_rdma_write_flush(f, rdma) < 0) { return -EIO; } while (rdma->nb_sent) { ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RDMA_WRITE, NULL); if (ret < 0) { fprintf(stderr, "rdma migration: complete polling error!\n"); return -EIO; } } qemu_rdma_unregister_waiting(rdma); return 0; } static int qemu_rdma_close(void *opaque) { DPRINTF("Shutting down connection.\n"); QEMUFileRDMA *r = opaque; if (r->rdma) { qemu_rdma_cleanup(r->rdma); g_free(r->rdma); } g_free(r); return 0; } /* * Parameters: * @offset == 0 : * This means that 'block_offset' is a full virtual address that does not * belong to a RAMBlock of the virtual machine and instead * represents a private malloc'd memory area that the caller wishes to * transfer. * * @offset != 0 : * Offset is an offset to be added to block_offset and used * to also lookup the corresponding RAMBlock. * * @size > 0 : * Initiate an transfer this size. * * @size == 0 : * A 'hint' or 'advice' that means that we wish to speculatively * and asynchronously unregister this memory. In this case, there is no * guarantee that the unregister will actually happen, for example, * if the memory is being actively transmitted. Additionally, the memory * may be re-registered at any future time if a write within the same * chunk was requested again, even if you attempted to unregister it * here. * * @size < 0 : TODO, not yet supported * Unregister the memory NOW. This means that the caller does not * expect there to be any future RDMA transfers and we just want to clean * things up. This is used in case the upper layer owns the memory and * cannot wait for qemu_fclose() to occur. * * @bytes_sent : User-specificed pointer to indicate how many bytes were * sent. Usually, this will not be more than a few bytes of * the protocol because most transfers are sent asynchronously. */ static size_t qemu_rdma_save_page(QEMUFile *f, void *opaque, ram_addr_t block_offset, ram_addr_t offset, size_t size, int *bytes_sent) { QEMUFileRDMA *rfile = opaque; RDMAContext *rdma = rfile->rdma; int ret; CHECK_ERROR_STATE(); qemu_fflush(f); if (size > 0) { /* * Add this page to the current 'chunk'. If the chunk * is full, or the page doen't belong to the current chunk, * an actual RDMA write will occur and a new chunk will be formed. */ ret = qemu_rdma_write(f, rdma, block_offset, offset, size); if (ret < 0) { fprintf(stderr, "rdma migration: write error! %d\n", ret); goto err; } /* * We always return 1 bytes because the RDMA * protocol is completely asynchronous. We do not yet know * whether an identified chunk is zero or not because we're * waiting for other pages to potentially be merged with * the current chunk. So, we have to call qemu_update_position() * later on when the actual write occurs. */ if (bytes_sent) { *bytes_sent = 1; } } else { uint64_t index, chunk; /* TODO: Change QEMUFileOps prototype to be signed: size_t => long if (size < 0) { ret = qemu_rdma_drain_cq(f, rdma); if (ret < 0) { fprintf(stderr, "rdma: failed to synchronously drain" " completion queue before unregistration.\n"); goto err; } } */ ret = qemu_rdma_search_ram_block(rdma, block_offset, offset, size, &index, &chunk); if (ret) { fprintf(stderr, "ram block search failed\n"); goto err; } qemu_rdma_signal_unregister(rdma, index, chunk, 0); /* * TODO: Synchronous, guaranteed unregistration (should not occur during * fast-path). Otherwise, unregisters will process on the next call to * qemu_rdma_drain_cq() if (size < 0) { qemu_rdma_unregister_waiting(rdma); } */ } /* * Drain the Completion Queue if possible, but do not block, * just poll. * * If nothing to poll, the end of the iteration will do this * again to make sure we don't overflow the request queue. */ while (1) { uint64_t wr_id, wr_id_in; int ret = qemu_rdma_poll(rdma, &wr_id_in, NULL); if (ret < 0) { fprintf(stderr, "rdma migration: polling error! %d\n", ret); goto err; } wr_id = wr_id_in & RDMA_WRID_TYPE_MASK; if (wr_id == RDMA_WRID_NONE) { break; } } return RAM_SAVE_CONTROL_DELAYED; err: rdma->error_state = ret; return ret; } static int qemu_rdma_accept(RDMAContext *rdma) { RDMACapabilities cap; struct rdma_conn_param conn_param = { .responder_resources = 2, .private_data = &cap, .private_data_len = sizeof(cap), }; struct rdma_cm_event *cm_event; struct ibv_context *verbs; int ret = -EINVAL; int idx; ret = rdma_get_cm_event(rdma->channel, &cm_event); if (ret) { goto err_rdma_dest_wait; } if (cm_event->event != RDMA_CM_EVENT_CONNECT_REQUEST) { rdma_ack_cm_event(cm_event); goto err_rdma_dest_wait; } memcpy(&cap, cm_event->param.conn.private_data, sizeof(cap)); network_to_caps(&cap); if (cap.version < 1 || cap.version > RDMA_CONTROL_VERSION_CURRENT) { fprintf(stderr, "Unknown source RDMA version: %d, bailing...\n", cap.version); rdma_ack_cm_event(cm_event); goto err_rdma_dest_wait; } /* * Respond with only the capabilities this version of QEMU knows about. */ cap.flags &= known_capabilities; /* * Enable the ones that we do know about. * Add other checks here as new ones are introduced. */ if (cap.flags & RDMA_CAPABILITY_PIN_ALL) { rdma->pin_all = true; } rdma->cm_id = cm_event->id; verbs = cm_event->id->verbs; rdma_ack_cm_event(cm_event); DPRINTF("Memory pin all: %s\n", rdma->pin_all ? "enabled" : "disabled"); caps_to_network(&cap); DPRINTF("verbs context after listen: %p\n", verbs); if (!rdma->verbs) { rdma->verbs = verbs; } else if (rdma->verbs != verbs) { fprintf(stderr, "ibv context not matching %p, %p!\n", rdma->verbs, verbs); goto err_rdma_dest_wait; } qemu_rdma_dump_id("dest_init", verbs); ret = qemu_rdma_alloc_pd_cq(rdma); if (ret) { fprintf(stderr, "rdma migration: error allocating pd and cq!\n"); goto err_rdma_dest_wait; } ret = qemu_rdma_alloc_qp(rdma); if (ret) { fprintf(stderr, "rdma migration: error allocating qp!\n"); goto err_rdma_dest_wait; } ret = qemu_rdma_init_ram_blocks(rdma); if (ret) { fprintf(stderr, "rdma migration: error initializing ram blocks!\n"); goto err_rdma_dest_wait; } for (idx = 0; idx < RDMA_WRID_MAX; idx++) { ret = qemu_rdma_reg_control(rdma, idx); if (ret) { fprintf(stderr, "rdma: error registering %d control!\n", idx); goto err_rdma_dest_wait; } } qemu_set_fd_handler2(rdma->channel->fd, NULL, NULL, NULL, NULL); ret = rdma_accept(rdma->cm_id, &conn_param); if (ret) { fprintf(stderr, "rdma_accept returns %d!\n", ret); goto err_rdma_dest_wait; } ret = rdma_get_cm_event(rdma->channel, &cm_event); if (ret) { fprintf(stderr, "rdma_accept get_cm_event failed %d!\n", ret); goto err_rdma_dest_wait; } if (cm_event->event != RDMA_CM_EVENT_ESTABLISHED) { fprintf(stderr, "rdma_accept not event established!\n"); rdma_ack_cm_event(cm_event); goto err_rdma_dest_wait; } rdma_ack_cm_event(cm_event); rdma->connected = true; ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY); if (ret) { fprintf(stderr, "rdma migration: error posting second control recv!\n"); goto err_rdma_dest_wait; } qemu_rdma_dump_gid("dest_connect", rdma->cm_id); return 0; err_rdma_dest_wait: rdma->error_state = ret; qemu_rdma_cleanup(rdma); return ret; } /* * During each iteration of the migration, we listen for instructions * by the source VM to perform dynamic page registrations before they * can perform RDMA operations. * * We respond with the 'rkey'. * * Keep doing this until the source tells us to stop. */ static int qemu_rdma_registration_handle(QEMUFile *f, void *opaque, uint64_t flags) { RDMAControlHeader reg_resp = { .len = sizeof(RDMARegisterResult), .type = RDMA_CONTROL_REGISTER_RESULT, .repeat = 0, }; RDMAControlHeader unreg_resp = { .len = 0, .type = RDMA_CONTROL_UNREGISTER_FINISHED, .repeat = 0, }; RDMAControlHeader blocks = { .type = RDMA_CONTROL_RAM_BLOCKS_RESULT, .repeat = 1 }; QEMUFileRDMA *rfile = opaque; RDMAContext *rdma = rfile->rdma; RDMALocalBlocks *local = &rdma->local_ram_blocks; RDMAControlHeader head; RDMARegister *reg, *registers; RDMACompress *comp; RDMARegisterResult *reg_result; static RDMARegisterResult results[RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE]; RDMALocalBlock *block; void *host_addr; int ret = 0; int idx = 0; int count = 0; int i = 0; CHECK_ERROR_STATE(); do { DDDPRINTF("Waiting for next request %" PRIu64 "...\n", flags); ret = qemu_rdma_exchange_recv(rdma, &head, RDMA_CONTROL_NONE); if (ret < 0) { break; } if (head.repeat > RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE) { fprintf(stderr, "rdma: Too many requests in this message (%d)." "Bailing.\n", head.repeat); ret = -EIO; break; } switch (head.type) { case RDMA_CONTROL_COMPRESS: comp = (RDMACompress *) rdma->wr_data[idx].control_curr; network_to_compress(comp); DDPRINTF("Zapping zero chunk: %" PRId64 " bytes, index %d, offset %" PRId64 "\n", comp->length, comp->block_idx, comp->offset); block = &(rdma->local_ram_blocks.block[comp->block_idx]); host_addr = block->local_host_addr + (comp->offset - block->offset); ram_handle_compressed(host_addr, comp->value, comp->length); break; case RDMA_CONTROL_REGISTER_FINISHED: DDDPRINTF("Current registrations complete.\n"); goto out; case RDMA_CONTROL_RAM_BLOCKS_REQUEST: DPRINTF("Initial setup info requested.\n"); if (rdma->pin_all) { ret = qemu_rdma_reg_whole_ram_blocks(rdma); if (ret) { fprintf(stderr, "rdma migration: error dest " "registering ram blocks!\n"); goto out; } } /* * Dest uses this to prepare to transmit the RAMBlock descriptions * to the source VM after connection setup. * Both sides use the "remote" structure to communicate and update * their "local" descriptions with what was sent. */ for (i = 0; i < local->nb_blocks; i++) { rdma->block[i].remote_host_addr = (uint64_t)(local->block[i].local_host_addr); if (rdma->pin_all) { rdma->block[i].remote_rkey = local->block[i].mr->rkey; } rdma->block[i].offset = local->block[i].offset; rdma->block[i].length = local->block[i].length; remote_block_to_network(&rdma->block[i]); } blocks.len = rdma->local_ram_blocks.nb_blocks * sizeof(RDMARemoteBlock); ret = qemu_rdma_post_send_control(rdma, (uint8_t *) rdma->block, &blocks); if (ret < 0) { fprintf(stderr, "rdma migration: error sending remote info!\n"); goto out; } break; case RDMA_CONTROL_REGISTER_REQUEST: DDPRINTF("There are %d registration requests\n", head.repeat); reg_resp.repeat = head.repeat; registers = (RDMARegister *) rdma->wr_data[idx].control_curr; for (count = 0; count < head.repeat; count++) { uint64_t chunk; uint8_t *chunk_start, *chunk_end; reg = ®isters[count]; network_to_register(reg); reg_result = &results[count]; DDPRINTF("Registration request (%d): index %d, current_addr %" PRIu64 " chunks: %" PRIu64 "\n", count, reg->current_index, reg->key.current_addr, reg->chunks); block = &(rdma->local_ram_blocks.block[reg->current_index]); if (block->is_ram_block) { host_addr = (block->local_host_addr + (reg->key.current_addr - block->offset)); chunk = ram_chunk_index(block->local_host_addr, (uint8_t *) host_addr); } else { chunk = reg->key.chunk; host_addr = block->local_host_addr + (reg->key.chunk * (1UL << RDMA_REG_CHUNK_SHIFT)); } chunk_start = ram_chunk_start(block, chunk); chunk_end = ram_chunk_end(block, chunk + reg->chunks); if (qemu_rdma_register_and_get_keys(rdma, block, (uint8_t *)host_addr, NULL, ®_result->rkey, chunk, chunk_start, chunk_end)) { fprintf(stderr, "cannot get rkey!\n"); ret = -EINVAL; goto out; } reg_result->host_addr = (uint64_t) block->local_host_addr; DDPRINTF("Registered rkey for this request: %x\n", reg_result->rkey); result_to_network(reg_result); } ret = qemu_rdma_post_send_control(rdma, (uint8_t *) results, ®_resp); if (ret < 0) { fprintf(stderr, "Failed to send control buffer!\n"); goto out; } break; case RDMA_CONTROL_UNREGISTER_REQUEST: DDPRINTF("There are %d unregistration requests\n", head.repeat); unreg_resp.repeat = head.repeat; registers = (RDMARegister *) rdma->wr_data[idx].control_curr; for (count = 0; count < head.repeat; count++) { reg = ®isters[count]; network_to_register(reg); DDPRINTF("Unregistration request (%d): " " index %d, chunk %" PRIu64 "\n", count, reg->current_index, reg->key.chunk); block = &(rdma->local_ram_blocks.block[reg->current_index]); ret = ibv_dereg_mr(block->pmr[reg->key.chunk]); block->pmr[reg->key.chunk] = NULL; if (ret != 0) { perror("rdma unregistration chunk failed"); ret = -ret; goto out; } rdma->total_registrations--; DDPRINTF("Unregistered chunk %" PRIu64 " successfully.\n", reg->key.chunk); } ret = qemu_rdma_post_send_control(rdma, NULL, &unreg_resp); if (ret < 0) { fprintf(stderr, "Failed to send control buffer!\n"); goto out; } break; case RDMA_CONTROL_REGISTER_RESULT: fprintf(stderr, "Invalid RESULT message at dest.\n"); ret = -EIO; goto out; default: fprintf(stderr, "Unknown control message %s\n", control_desc[head.type]); ret = -EIO; goto out; } } while (1); out: if (ret < 0) { rdma->error_state = ret; } return ret; } static int qemu_rdma_registration_start(QEMUFile *f, void *opaque, uint64_t flags) { QEMUFileRDMA *rfile = opaque; RDMAContext *rdma = rfile->rdma; CHECK_ERROR_STATE(); DDDPRINTF("start section: %" PRIu64 "\n", flags); qemu_put_be64(f, RAM_SAVE_FLAG_HOOK); qemu_fflush(f); return 0; } /* * Inform dest that dynamic registrations are done for now. * First, flush writes, if any. */ static int qemu_rdma_registration_stop(QEMUFile *f, void *opaque, uint64_t flags) { Error *local_err = NULL, **errp = &local_err; QEMUFileRDMA *rfile = opaque; RDMAContext *rdma = rfile->rdma; RDMAControlHeader head = { .len = 0, .repeat = 1 }; int ret = 0; CHECK_ERROR_STATE(); qemu_fflush(f); ret = qemu_rdma_drain_cq(f, rdma); if (ret < 0) { goto err; } if (flags == RAM_CONTROL_SETUP) { RDMAControlHeader resp = {.type = RDMA_CONTROL_RAM_BLOCKS_RESULT }; RDMALocalBlocks *local = &rdma->local_ram_blocks; int reg_result_idx, i, j, nb_remote_blocks; head.type = RDMA_CONTROL_RAM_BLOCKS_REQUEST; DPRINTF("Sending registration setup for ram blocks...\n"); /* * Make sure that we parallelize the pinning on both sides. * For very large guests, doing this serially takes a really * long time, so we have to 'interleave' the pinning locally * with the control messages by performing the pinning on this * side before we receive the control response from the other * side that the pinning has completed. */ ret = qemu_rdma_exchange_send(rdma, &head, NULL, &resp, ®_result_idx, rdma->pin_all ? qemu_rdma_reg_whole_ram_blocks : NULL); if (ret < 0) { ERROR(errp, "receiving remote info!"); return ret; } nb_remote_blocks = resp.len / sizeof(RDMARemoteBlock); /* * The protocol uses two different sets of rkeys (mutually exclusive): * 1. One key to represent the virtual address of the entire ram block. * (dynamic chunk registration disabled - pin everything with one rkey.) * 2. One to represent individual chunks within a ram block. * (dynamic chunk registration enabled - pin individual chunks.) * * Once the capability is successfully negotiated, the destination transmits * the keys to use (or sends them later) including the virtual addresses * and then propagates the remote ram block descriptions to his local copy. */ if (local->nb_blocks != nb_remote_blocks) { ERROR(errp, "ram blocks mismatch #1! " "Your QEMU command line parameters are probably " "not identical on both the source and destination."); return -EINVAL; } qemu_rdma_move_header(rdma, reg_result_idx, &resp); memcpy(rdma->block, rdma->wr_data[reg_result_idx].control_curr, resp.len); for (i = 0; i < nb_remote_blocks; i++) { network_to_remote_block(&rdma->block[i]); /* search local ram blocks */ for (j = 0; j < local->nb_blocks; j++) { if (rdma->block[i].offset != local->block[j].offset) { continue; } if (rdma->block[i].length != local->block[j].length) { ERROR(errp, "ram blocks mismatch #2! " "Your QEMU command line parameters are probably " "not identical on both the source and destination."); return -EINVAL; } local->block[j].remote_host_addr = rdma->block[i].remote_host_addr; local->block[j].remote_rkey = rdma->block[i].remote_rkey; break; } if (j >= local->nb_blocks) { ERROR(errp, "ram blocks mismatch #3! " "Your QEMU command line parameters are probably " "not identical on both the source and destination."); return -EINVAL; } } } DDDPRINTF("Sending registration finish %" PRIu64 "...\n", flags); head.type = RDMA_CONTROL_REGISTER_FINISHED; ret = qemu_rdma_exchange_send(rdma, &head, NULL, NULL, NULL, NULL); if (ret < 0) { goto err; } return 0; err: rdma->error_state = ret; return ret; } static int qemu_rdma_get_fd(void *opaque) { QEMUFileRDMA *rfile = opaque; RDMAContext *rdma = rfile->rdma; return rdma->comp_channel->fd; } const QEMUFileOps rdma_read_ops = { .get_buffer = qemu_rdma_get_buffer, .get_fd = qemu_rdma_get_fd, .close = qemu_rdma_close, .hook_ram_load = qemu_rdma_registration_handle, }; const QEMUFileOps rdma_write_ops = { .put_buffer = qemu_rdma_put_buffer, .close = qemu_rdma_close, .before_ram_iterate = qemu_rdma_registration_start, .after_ram_iterate = qemu_rdma_registration_stop, .save_page = qemu_rdma_save_page, }; static void *qemu_fopen_rdma(RDMAContext *rdma, const char *mode) { QEMUFileRDMA *r = g_malloc0(sizeof(QEMUFileRDMA)); if (qemu_file_mode_is_not_valid(mode)) { return NULL; } r->rdma = rdma; if (mode[0] == 'w') { r->file = qemu_fopen_ops(r, &rdma_write_ops); } else { r->file = qemu_fopen_ops(r, &rdma_read_ops); } return r->file; } static void rdma_accept_incoming_migration(void *opaque) { RDMAContext *rdma = opaque; int ret; QEMUFile *f; Error *local_err = NULL, **errp = &local_err; DPRINTF("Accepting rdma connection...\n"); ret = qemu_rdma_accept(rdma); if (ret) { ERROR(errp, "RDMA Migration initialization failed!"); return; } DPRINTF("Accepted migration\n"); f = qemu_fopen_rdma(rdma, "rb"); if (f == NULL) { ERROR(errp, "could not qemu_fopen_rdma!"); qemu_rdma_cleanup(rdma); return; } rdma->migration_started_on_destination = 1; process_incoming_migration(f); } void rdma_start_incoming_migration(const char *host_port, Error **errp) { int ret; RDMAContext *rdma; Error *local_err = NULL; DPRINTF("Starting RDMA-based incoming migration\n"); rdma = qemu_rdma_data_init(host_port, &local_err); if (rdma == NULL) { goto err; } ret = qemu_rdma_dest_init(rdma, &local_err); if (ret) { goto err; } DPRINTF("qemu_rdma_dest_init success\n"); ret = rdma_listen(rdma->listen_id, 5); if (ret) { ERROR(errp, "listening on socket!"); goto err; } DPRINTF("rdma_listen success\n"); qemu_set_fd_handler2(rdma->channel->fd, NULL, rdma_accept_incoming_migration, NULL, (void *)(intptr_t) rdma); return; err: error_propagate(errp, local_err); g_free(rdma); } void rdma_start_outgoing_migration(void *opaque, const char *host_port, Error **errp) { MigrationState *s = opaque; Error *local_err = NULL, **temp = &local_err; RDMAContext *rdma = qemu_rdma_data_init(host_port, &local_err); int ret = 0; if (rdma == NULL) { ERROR(temp, "Failed to initialize RDMA data structures! %d", ret); goto err; } ret = qemu_rdma_source_init(rdma, &local_err, s->enabled_capabilities[MIGRATION_CAPABILITY_RDMA_PIN_ALL]); if (ret) { goto err; } DPRINTF("qemu_rdma_source_init success\n"); ret = qemu_rdma_connect(rdma, &local_err); if (ret) { goto err; } DPRINTF("qemu_rdma_source_connect success\n"); s->file = qemu_fopen_rdma(rdma, "wb"); migrate_fd_connect(s); return; err: error_propagate(errp, local_err); g_free(rdma); migrate_fd_error(s); }